This commit is the result of the following command, followed by
reindenting (but not wrapping lines):
perl -00 -i -pe 's/^( *)TEST_ASSERT\(([^;=]*)(?: |\n *)==\s*PSA_SUCCESS\s*\);$/${1}PSA_ASSERT($2 );/gm' tests/suites/test_suite_psa_*.function
Cause a compilation error on ARRAY_LENGTH(p) where p is a pointer as
opposed to an array. This only works under GCC and compatible
compilers such as Clang. On other compilers, ARRAY_LENGTH works but
doesn't check the type of its argument.
Document when a context must be initialized or not, when it must be
set up or not, and whether it needs a private key or a public key will
do.
The implementation is sometimes more liberal than the documentation,
accepting a non-set-up context as a context that can't perform the
requested information. This preserves backward compatibility.
The MPI_VALIDATE_RET() macro cannot be used for parameter
validation of mbedtls_mpi_lsb() because this function returns
a size_t.
Use the underlying MBEDTLS_INTERNAL_VALIDATE_RET() insteaed,
returning 0 on failure.
Also, add a test for this behaviour.
For mbedtls_pk_parse_key and mbedtls_pk_parse_keyfile, the password is
optional. Clarify what this means: NULL is ok and means no password.
Validate parameters and test accordingly.
The test that mbedtls_aria_free() accepts NULL parameters
can be performed even if MBEDTLS_CHECK_PARAMS is unset, but
was previously included in the test case aria_invalid_params()
which is only executed if MBEDTLS_CHECK_PARAMS is set.
Parameter validation was previously performed and tested unconditionally
for the ChaCha/Poly modules. This commit therefore only needs go guard the
existing tests accordingly and use the appropriate test macros for parameter
validation.
This commit finishes the removal of support for direct access to key
slots in psa_crypto.c.
This marks the end of the necessary phase of the transition to key
handles. The code should subsequently be refactored to move key slot
management from psa_crypto.c to psa_crypto_slot_management.c.
Switch from the direct use of slot numbers to handles allocated by
psa_allocate_key.
The general principle for each function is:
* Change `psa_key_slot_t slot` to `psa_key_handle_t handle` or
`psa_key_id_t key_id` depending on whether it's used as a handle to
an open slot or as a persistent name for a key.
* Call psa_create_key() before using a slot, instead of calling
psa_set_key_lifetime to make a slot persistent.
Remove the unit test persistent_key_is_configurable which is no longer
relevant.
Switch from the direct use of slot numbers to handles allocated by
psa_allocate_key.
This commit does not affect persistent key tests except for the one
test function in test_suite_psa_crypto that uses persistent keys
(persistent_key_load_key_from_storage).
The general principle for each function is:
* Change `psa_key_slot_t slot` to `psa_key_handle_t handle`.
* Call psa_allocate_key() before setting the policy of the slot,
or before creating key material in functions that don't set a policy.
* Some PSA_ERROR_EMPTY_SLOT errors become PSA_ERROR_INVALID_HANDLE
because there is now a distinction between not having a valid
handle, and having a valid handle to a slot that doesn't contain key
material.
* In tests that use symmetric keys, calculate the max_bits parameters
of psa_allocate_key() from the key data size. In tests where the key
may be asymmetric, call an auxiliary macro KEY_BITS_FROM_DATA which
returns an overapproximation. There's no good way to find a good
value for max_bits with the API, I think the API should be tweaked.
Implement psa_allocate_key, psa_open_key, psa_create_key,
psa_close_key.
Add support for keys designated to handles to psa_get_key_slot, and
thereby to the whole API.
Allocated and non-allocated keys can coexist. This is a temporary
stage in order to transition from the use of direct slot numbers to
allocated handles only. Once all the tests and sample programs have
been migrated to use handles, the implementation will be simplified
and made more robust with support for handles only.
Previously, one could change the definition of AES_VALIDATE_RET() to return
some other code than MBEDTLS_ERR_AES_BAD_INPUT_DATA, and the test suite
wouldn't notice. Now this modification would make the suite fail as expected.
The test framework for validation of parameters depends on the macro
MBEDTLS_PARAM_FAILED() being set to its default value when building the
library. So far the test framework attempted to define this macro but this was
the wrong place - this definition wouldn't be picked by the library.
Instead, a different approach is taken: skip those tests when the macro is
defined in config.h, as in that case we have no way to know if it will indeed
end up calling mbedtls_param_failed() as we need it to.
This commit was tested by manually ensuring that aes_invalid_params:
- passes (and is not skipped) in the default configuration
- is skipped when MBEDTLS_PARAM_FAILED() is defined in config.h
The previous prototype gave warnings are the strings produced by #cond and
__FILE__ are const, so we shouldn't implicitly cast them to non-const.
While at it modifying most example programs:
- include the header that has the function declaration, so that the definition
can be checked to match by the compiler
- fix whitespace
- make it work even if PLATFORM_C is not defined:
- CHECK_PARAMS is not documented as depending on PLATFORM_C and there is
no reason why it should
- so, remove the corresponding #if defined in each program...
- and add missing #defines for mbedtls_exit when needed
The result has been tested (make all test with -Werror) with the following
configurations:
- full with CHECK_PARAMS with PLATFORM_C
- full with CHECK_PARAMS without PLATFORM_C
- full without CHECK_PARAMS without PLATFORM_C
- full without CHECK_PARAMS with PLATFORM_C
Additionally, it has been manually tested that adding
mbedtls_aes_init( NULL );
near the normal call to mbedtls_aes_init() in programs/aes/aescrypt2.c has the
expected effect when running the program.
It was inconsistent between files: sometimes 3 arguments, sometimes one.
Align to 1 argument for the macro and 3 for the function, because:
- we don't need 3 arguments for the macro, it can add __FILE__ and __LINE__
in its expansion, while the function needs them as parameters to be correct;
- people who re-defined the macro should have flexibility, and 3 arguments
can give the impression they they don't have as much as they actually do;
- the design document has the macro with 1 argument, so let's stick to that.
Change the use of setjmp and longjmp in signalling parameter validation failures
when using the MBEDTLS_CHECK_PARAMS config.h option. This change allows
all calls which might result in a call to the parameter validation failure
handler to always be caught, even without use of the new macros, by placing a
setjmp() in the outer function which calls the test function, which the handler
can jump to.
This has several benefits:
* it allows us to remove the clang compiler warning (-Wclobbered) caused
by local auto variables being in the same function as the call to setjmp.
* removes the need to wrap all function calls in the test functions with the
TEST_ASSERT() macro. Now all parameter validation function calls should be
caught.
The tests for the ECDH key exchange that use the context accessed it
directly. This can't work with the new context, where we can't make any
assumptions about the implementation of the context. This commit works
around this problem and comes with the cost of allocating an extra
structures on the stack when executing the test.
One of the tests is testing an older interface for the sake of backward
compatibility. The new ECDH context is not backward compatible and this
test doesn't make any sense for it, therefore we skip this test in
non-legacy mode.
Programs must not include mbedtls/platform.h if MBEDTLS_PLATFORM_C is
not defined. Test suites don't need to include mbedtls/platform.h
because helpers.function takes care of it.
This commit also removes a stray `;` which is technically not standard C.
The recently added `mbedtls_ecdh_setup()` function is not used in the
tests yet. This commit adapts the tests to the new workflow.
Having done that, the old lifecycle is not tested anymore, so we add a
new test to ensure backward compatibility.
Add missing compilation guards that broke the build if either GCM or
CCM was not defined.
Add missing guards on test cases that require GCM or CBC.
The build and tests now pass for any subset of {MBEDTLS_CCM_C,
MBEDTLS_GCM_C}. There are still unused variables warnings if neither
is defined.
Since the AD too long is a limitation on Mbed TLS,
HW accelerators may support this. Run the test for AD too long,
only if `MBEDTLS_CCM_ALT` is not defined.
Addresses comment in #1996.
Write an all-bits-zero NV seed file for the tests. Without this, if
the seed file is not present when this test suite is executed, the
PSA module initialization will fail, causing most test cases to fail.
Also write an all-bits-zero NV seed file at the end. The test cases in
this test suite mess with the file, but subsequent test suites may
need it.
When testing with custom entropy sources, if MBEDTLS_ENTROPY_NV_SEED
is enabled at compile time but the NV seed source is not used at
runtime, mbedtls_entropy_func makes a second pass anyway. Cope with
this in the test code by telling the entropy module not to make this
second pass.
Add a function to configure entropy sources. For testing only.
Use it to test that the library initialization fails properly if there is no
entropy source.
It's better for names in the API to describe the "what" (opaque keys) rather
than the "how" (using PSA), at least since we don't intend to have multiple
function doing the same "what" in different ways in the foreseeable future.
Unfortunately the can_do wrapper does not receive the key context as an
argument, so it cannot check psa_get_key_information(). Later we might want to
change our internal structures to fix this, but for now we'll just restrict
opaque PSA keys to be ECDSA keypairs, as this is the only thing we need for
now. It also simplifies testing a bit (no need to test each key type).
While at it, clarify who's responsible for destroying the underlying key. That
can't be us because some keys cannot be destroyed and we wouldn't know. So
let's leave that up to the caller.
The test suites `test_suite_gcm.aes{128,192,256}_en.data` contains
numerous NIST test vectors for AES-*-GCM against which the GCM
API mbedtls_gcm_xxx() is tested.
However, one level higher at the cipher API, no tests exist which
exercise mbedtls_cipher_auth_{encrypt/decrypt}() for GCM ciphers,
although test_suite_cipher.function contains the test auth_crypt_tv
which does precisely that and is already used e.g. in
test_suite_cipher.ccm.
This commit replicates the test vectors from
test_suite_gcm.aes{128,192,256}_en.data in test_suite_cipher.gcm.data
and adds a run of auth_crypt_tv for each of them.
The conversion was mainly done through the sed command line
```
s/gcm_decrypt_and_verify:\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\):
\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\)/auth_crypt_tv:
\1:\2:\4:\5:\3:\7:\8:\9/
```
Allow mbedtls_psa_crypto_free to be called twice, or without a prior
call to psa_crypto_init. Keep track of the initialization state more
precisely in psa_crypto_init so that mbedtls_psa_crypto_free knows
what to do.
It's better for names in the API to describe the "what" (opaque keys) rather
than the "how" (using PSA), at least since we don't intend to have multiple
function doing the same "what" in different ways in the foreseeable future.
Unfortunately the can_do wrapper does not receive the key context as an
argument, so it cannot check psa_get_key_information(). Later we might want to
change our internal structures to fix this, but for now we'll just restrict
opaque PSA keys to be ECDSA keypairs, as this is the only thing we need for
now. It also simplifies testing a bit (no need to test each key type).
While at it, clarify who's responsible for destroying the underlying key. That
can't be us because some keys cannot be destroyed and we wouldn't know. So
let's leave that up to the caller.
Allow use of persistent keys, including configuring them, importing and
exporting them, and destroying them.
When getting a slot using psa_get_key_slot, there are 3 scenarios that
can occur if the keys lifetime is persistent:
1. Key type is PSA_KEY_TYPE_NONE, no persistent storage entry:
- The key slot is treated as a standard empty key slot
2. Key type is PSA_KEY_TYPE_NONE, persistent storage entry exists:
- Attempt to load the key from persistent storage
3. Key type is not PSA_KEY_TYPE_NONE:
- As checking persistent storage on every use of the key could
be expensive, the persistent key is assumed to be saved in
persistent storage, the in-memory key is continued to be used.
Add new functions, psa_load_persistent_key(),
psa_free_persistent_key_data(), and psa_save_persistent_key(), for
managing persistent keys. These functions load to or save from our
internal representation of key slots. Serialization is a concern of the
storage backend implementation and doesn't abstraction-leak into the
lifetime management code.
An initial implementation for files is provided. Additional storage
backends can implement this interface for other storage types.
Mbed TLS version 2.14.0
Resolved conflicts in include/mbedtls/config.h,
tests/scripts/check-files.py, and yotta/create-module.sh by removing yotta.
Resolved conflicts in tests/.jenkins/Jenkinsfile by continuing to run
mbedtls-psa job.
There was no test case of ECDH with anything other than
PSA_ALG_SELECT_RAW. Exercise the code path from ECDH through a
"proper" KDF.
ECDH shared secret copied from an existing test, HKDF output
calculated with Cryptodome.
In ECDH key agreement, allow a public key with the OID id-ECDH, not
just a public key with the OID id-ecPublicKey.
Public keys with the OID id-ECDH are not permitted by psa_import_key,
at least for now. There would be no way to use the key for a key
agreement operation anyway in the current API.
Add test cases that do key agreement with raw selection in pieces, to
validate that selection works even when the application doesn't read
everything in one chunk.
A key selection algorithm is similar to a key derivation algorithm in
that it takes a secret input and produces a secret output stream.
However, unlike key derivation algorithms, there is no expectation
that the input cannot be reconstructed from the output. Key selection
algorithms are exclusively meant to be used on the output of a key
agreement algorithm to select chunks of the shared secret.
`test_hkdf` in the hkdf test suites consumed stack of ~6KB with
6 buffers of ~1KB each. This causes stack overflow on some platforms
with smaller stack. The buffer sizes were reduced. By testing, the sizes
can be reduced even further, as the largest seen size is 82 bytes(for okm).
On key import and key generation, for RSA, reject key sizes that are
not a multiple of 8. Such keys are not well-supported in Mbed TLS and
are hardly ever used in practice.
The previous commit removed support for non-byte-aligned keys at the
PSA level. This commit actively rejects such keys and adds
corresponding tests (test keys generated with "openssl genrsa").
We had only allocated 40 bytes for printing into, but we wanted to print 46
bytes. Update the buffer to be 47 bytes, which is large enough to hold what
we want to print plus a terminating null byte.
Simplify the test case "PSA export a slot after a failed import of an
EC keypair": use an invalid private value for the specified curve. Now
the dependencies match the test data, so this fixes curves.pl.
