Without this parameter, it would be hard for callers to know how many bytes
of output the function wrote into the output buffer. It would be possible,
since the cumulated output must have the same length as the cumulated input,
but it would be cumbersome for the caller to keep track.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Various functions for PSA cipher and mac operations call abort
on failure; test that this is done. The PSA spec does not require
this behaviour, but it makes our implementation more robust in
case the user does not abort the operation as required by the
PSA spec.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
New functions are used to cover corner cases:
* authentication data is fed to gcm with 0, 1 or 2 calls to gcm_update
* ciphertext is fed to gcm with 0, 1 or 2 calls to gcm_update_ad
AES-GCM NIST test vectors downloaded at 16.06.2021 from:
csrc.nist.gov/groups/STM/cavp/documents/mac/gcmtestvectors.zip
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The cipher_bad_order test happened to pass, but was not testing the
failure case it intended to test.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
PSA_KEY_LIFETIME_FROM_PERSISTENCE_AND_LOCATION shifts the location
value (location << 8). This can go outside the range of a 32-bit int
if the location value is above 2^23 as is the case here. Asan
rightfully complained about it. Make the value unsigned to avoid the
integer overflow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test keys with various persistence levels, enumerated from the
metadata tests.
For read-only keys, do not attempt to create or destroy the key
through the API, only to read a key that has been injected into
storage directly through filesystem access.
Do not test keys with a non-default location, since they require a
driver and we do not yet have a dependency mechanism to require the
presence of a driver for a specific location value.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Attempting to create a key with an invalid location or with read-only
persistence must be rejected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources
(RFC 7748 say we MAY reject 0 as a result) and recommended by some to
reject those points (either to ensure contributory behaviour, or to
protect against timing attack when the underlying field arithmetic is
not constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Where hashlen was previously ignored when the hash length could be
inferred from an md_alg parameter, the two must now match.
Adapt the existing tests accordingly. Adapt the sample programs accordingly.
This commit does not add any negative testing.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a bug introduced in "Fix multiplication producing a negative zero" that
caused the sign to be forced to +1 when A > 0, B < 0 and B's low-order limb
is 0.
Add a non-regression test. More generally, systematically test combinations
of leading zeros, trailing zeros and signs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
No need to bypass the API to fill limbs. It's a better test to just
set the top bit that we want to have set, and it's one less bypass of
the API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In mbedtls_mpi_read_string, if the string is empty, return an empty bignum
rather than a bignum with one limb with the value 0.
Both representations are correct, so this is not, in principle, a
user-visible change. The change does leak however through
mbedtls_mpi_write_string in base 16 (but not in other bases), as it writes a
bignum with 0 limbs as "" but a bignum with the value 0 and at least one
limb as "00".
This change makes it possible to construct an empty bignum through
mbedtls_mpi_read_string, which is especially useful to construct test
cases (a common use of mbedtls_mpi_read_string, as most formats use in
production encode numbers in binary, to be read with mbedtls_mpi_read_binary
or mbedtls_mpi_read_binary_le).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix mbedtls_mpi_mul_mpi() when one of the operands is zero and the
other is negative. The sign of the result must be 1, since some
library functions do not treat {-1, 0, NULL} or {-1, n, {0}} as
representing the value 0.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a null pointer dereference in mbedtls_mpi_exp_mod(X, A, N, E, _RR) when
A is the value 0 represented with 0 limbs.
Make the code a little more robust against similar bugs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test both 0 represented with 0 limbs ("0 (null)") and 0 represented
with 1 limb ("0 (1 limb)"), because occasionally there are bugs with
0-limb bignums and occasionally there are bugs with removing leading
zero limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_exp_mod can be called in three ways regarding the speed-up
parameter _RR: null (unused), zero (will be updated), nonzero (will be
used). Systematically test all three.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the RR parameter to the mbedtls_mpi_exp_mod test function.
It was never used in the test data, so there is no loss of functionality.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test mbedtls_mpi_safe_cond_assign() and mbedtls_mpi_safe_cond_swap()
with their "unsafe" counterparts mbedtls_mpi_copy() and
mbedtls_mpi_swap(). This way we don't need to repeat the coverage of
test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Similarly to "Overhaul testing of mbedtls_mpi_copy", simplify the code
to test mbedtls_mpi_swap to have just one function for distinct MPIs
and one function for swapping an MPI with itself, covering all cases
of size (0, 1, >1) and sign (>0, <0).
The test cases are exactly the same as for mbedtls_mpi_copy with the
following replacements:
* `Copy` -> `Swap`
* ` to ` -> ` with `
* `_copy` -> `_swap`
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace the two test functions mbedtls_mpi_copy_sint (supporting signed
inputs but always with exactly one limb) and mbedtls_mpi_copy_binary
(supporting arbitrary-sized inputs but not negative inputs) by a single
function that supports both arbitrary-sized inputs and arbitrary-signed
inputs. This will allows testing combinations like negative source and
zero-sized destination.
Also generalize mpi_copy_self to support arbitrary inputs.
Generate a new list of test cases systematically enumerating all
possibilities among various categories: zero with 0 or 1 limb, negative or
positive with 1 limb, negative or positive with >1 limb. I used the
following Perl script:
```
sub rhs { $_ = $_[0]; s/bead/beef/; s/ca5cadedb01dfaceacc01ade/face1e55ca11ab1ecab005e5/; $_ }
%v = (
"zero (null)" => "",
"zero (1 limb)" => "0",
"small positive" => "bead",
"large positive" => "ca5cadedb01dfaceacc01ade",
"small negative" => "-bead",
"large negative" => "-ca5cadedb01dfaceacc01ade",
);
foreach $s (sort keys %v) {
foreach $d (sort keys %v) {
printf "Copy %s to %s\nmbedtls_mpi_copy:\"%s\":\"%s\"\n\n",
$s, $d, $v{$s}, rhs($v{$d});
}
}
foreach $s (sort keys %v) {
printf "Copy self: %s\nmpi_copy_self:\"%s\"\n\n", $s, $v{$s};
}
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is mostly to look for cases where the sign bit may have been left at 0
after zerozing memory, or a value of 0 with the sign bit set to -11. Both of
these mostly work fine, so they can go otherwise undetected by unit tests,
but they can break when certain combinations of functions are used.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace calls to mbedtls_mpi_read_string() with a wrapper
mbedtls_test_read_mpi() when reading test data except for the purpose
of testing mbedtls_mpi_read_string() itself. The wrapper lets the test
data control precisely how many limbs the constructed MPI has.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This test helper reads an MPI from a string and guarantees control over the
number of limbs of the MPI, allowing test cases to construct values with or
without leading zeros, including 0 with 0 limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Hash and sign algorithms require the alignment of the input length with
the hash length at verification as well not just when signing.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The psa_verify_hash() is the pre-hashed version of the API and supposed
to work on hashes generated by the user. There were tests passing that
were getting "hashes" of sizes different from the expected.
Transform these into properly failing tests.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Tests for psa_mac_compute and psa_mac_verify functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reverting some deleted tests and changing the deprecated algo
Deleting deprecated headers from /alt-dummy dir
Corrections to the comments
Removal of deleted functions from compat-2.x.h
Corrections to tests/data_files/Makefile
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
The default curve is now Curve25519, which doesn't support restartable ECC.
So run the restartable ECC tests with a curve that does support it. Use
secp256r1 which is required for these tests anyway for the server's
certificate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There was already a test case for 0 but with a non-empty representation
(X->n == 1). Add a test case with X->n == 0 (freshly initialized mpi).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
in file tests/suite/test_suite_aes.function, aes_crypt_xts_size()
did not free the context upon the function exit.
The function now frees the context on exit.
Fixes#4176
Signed-off-by: JoeSubbiani <Joe.Subbiani@arm.com>
It was used to remove the code used when mbedtls_ecp_mul() received a
NULL RNG parameter. This code is no longer relevant (as the RNG may no
longer be NULL) and will be unconditionally removed in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This is necessary for the case where the public part of an EC keypair
needs to be computed from the private part - either because it was not
included (it's an optional component) or because it was compressed (a
format we can't parse).
This changes the API of two public functions: mbedtls_pk_parse_key() and
mbedtls_pk_parse_keyfile().
Tests and programs have been adapted. Some programs use a non-secure RNG
(from the test library) just to get things to compile and run; in a
future commit this should be improved in order to demonstrate best
practice.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- mbedtls_ecp_check_pub_priv() because it calls ecp_mul()
- mbedtls_pk_check_pair() because it calls the former
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Fix trivial faulty calls in ECP test suite and ECP/ECJPAKE self-tests (by
adding a dummy RNG).
Several tests suites are not passing yet, as a couple of library
function do call ecp_mul() with a NULL RNG. The complexity of the fixes
range from "simple refactoring" to "requires API changes", so these will
be addressed in separate commits.
This makes the option MBEDTLS_ECP_NO_INTERNAL_RNG, as well as the whole
"internal RNG" code, obsolete. This will be addressed in a future
commit, after getting the test suites to pass again.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Commit removes tests from ssl-opt.sh
that were specific to
MBEDTLS_SSL_TRUNCATED_HMAC extention.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
mbedtls_dhm_get_value can be seen as either a copy function or a getter
function. Given the name and the semantics, it's more of a getter, even if
it "gets" by doing a copy. Therefore, put the context first, and the
selector next, leaving the output for last.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It would be possible to make SSL debugging compatible with MBEDTLS_DHM_ALT,
but too much low-priority work right now, so don't require it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
... unless the alt implementation defines a group structure that's mostly
compatible with the built-in one and supports partially filled group
structures in the same way.
It would be possible to rewrite the SpecifiedECDomain parsing code to avoid
requiring support for partially filled group structures, but that's too
complicated to do now.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add two functions mbedtls_dhm_get_len() and mbedtls_dhm_get_bitlen() to
query the length of the modulus in bytes or bits.
Remove the len field: the cost of calling mbedtls_dhm_get_len() each time
it's needed is negligible, and this improves the abstraction of the DHM
module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use headers defining dummy context types.
The test does not pass yet. I plan to fix this in subsequent commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Follow-up to "Create xxx_alt.h headers for testing". The inclusion of
threading_alt.h in include/mbedtls/threading.h does not follow the
same pattern as the others so it was missed by the script.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These headers define the context types that alternative implementations must
provide. The context types are dummy types, suitable for building but not
meant to be usable by an implementation.
This is the output of the following script:
```
perl -0777 -ne '
m@^#if !defined\((MBEDTLS_\w+_ALT)\).*\n((?:.*\n)*?)#else.*\n#include "(.*_alt\.h)"\n#endif@m or next;
$symbol = $1; $content = $2; $header = $3;
$header_symbol = $header; $header_symbol =~ y/a-z./A-Z_/;
m@/\*[ *\n]*Copyright .*?\*/@s or die; $copyright = $&;
open OUT, ">tests/include/alt-dummy/$header" or die;
$content =~ s@//.*@@mg;
$content =~ s@/\*.*?\*/@@sg;
$content =~ s@\{.*?\}@{\n int dummy;\n}@sg;
$content =~ s@ +$@@mg;
$content =~ s@\n{3,}@\n\n@g; $content =~ s@\A\n+@@; $content =~ s@\n*\Z@\n@;
print OUT "/* $header with dummy types for $symbol */\n$copyright\n\n#ifndef $header_symbol\n#define $header_symbol\n\n$content\n\n#endif /* $header */\n" or die;
close OUT or die;
' include/mbedtls/*.h
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
include/mbedtls/ssl.h
include/psa/crypto_struct.h
Conflicts fixed by using the code from development branch
and manually re-applying the MBEDTLS_PRIVATE wrapping.
Remove padding parameters as mbedtls_rsa_init()
cannot return an error code when padding
parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
mbedtls_rsa_set_padding() now returns the error
code MBEDTLS_ERR_RSA_INVALID_PADDING when
padding parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This change enables automatic detection and consumption of Mbed TLS
library targets from within other CMake projects. By generating an
`MbedTLSConfig.cmake` file, consuming projects receive a more complete
view of these targets, allowing them to be used as dependencies which
properly inherit the transitive dependencies of the libraries.
This is fairly fragile, as it seems Mbed TLS's libraries do not appear
to properly model their dependencies on other targets, including
third-party dependencies. It is, however, sufficient for building and
linking the compiled Mbed TLS libraries when there are no third-party
dependencies involved. Further work is needed for more complex
use-cases, but this will likely meet the needs of most projects.
Resolves#298. Probably useful for #2857.
Signed-off-by: Chris Kay <chris.kay@arm.com>
This commit removes the API
```
mbedtls_ssl_conf_ciphersuites_for_version()
```
which allows to configure lists of acceptable ciphersuites
for each supported version of SSL/TLS: SSL3, TLS 1.{0,1,2}.
With Mbed TLS 3.0, support for SSL3, TLS 1.0 and TLS 1.1
is dropped. Moreover, upcoming TLS 1.3 support has a different
notion of cipher suite and will require a different API.
This means that it's only for TLS 1.2 that we require
a ciphersuite configuration API, and
```
mbedtls_ssl_conf_ciphersuites()
```
can be used for that. The version-specific ciphersuite
configuration API `mbedtls_ssl_conf_ciphersuites_for_version()`,
in turn, is no longer needed.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Do more iterations with small values. This makes it more likely that a
mistake on bounds will be detected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Slightly simplify is_significantly_above_a_power_of_2() to make it
easier to understand:
* Remove the explicit negative answer for x <= 4. The only functional
difference this makes is that is_significantly_above_a_power_of_2(3)
is now true.
* Shift the most significant bit of x to position 8 rather than 15.
This makes the final comparison easier to explain.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for mbedtls_mpi_fill_random() and mbedtls_mpi_random()
when the resulting MPI object previously had a nonzero value. I wrote
those to catch a bug that I introduced during the development of
mbedtls_mpi_random() (but does not appear in a committed version).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_random() uses mbedtls_mpi_cmp_mpi_ct(), which requires its
two arguments to have the same storage size. This was not the case
when the upper bound passed to mbedtls_mpi_random() had leading zero
limbs.
Fix this by forcing the result MPI to the desired size. Since this is
not what mbedtls_mpi_fill_random() does, don't call it from
mbedtls_mpi_random(), but instead call a new auxiliary function.
Add tests to cover this and other conditions with varying sizes for
the two arguments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of generating blinding values and keys in a not-quite-uniform way
(https://github.com/ARMmbed/mbedtls/issues/4245) with copy-pasted code,
use mbedtls_mpi_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_dhm_make_params() with x_size != size of P is not likely to be
useful, but it's supported, so test it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Repeat a few tests that use random data. This way the code is
exercised with a few different random values.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Improve the validation of the output from mbedtls_dhm_make_params:
* Test that the output in the byte buffer matches the value in the
context structure.
* Test that the calculated values are in the desired range.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since mbedtls_mpi_random() is not specific to ECC code, move it from
the ECP module to the bignum module.
This increases the code size in builds without short Weierstrass
curves (including builds without ECC at all) that do not optimize out
unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename mbedtls_ecp_gen_privkey_sw to mbedtls_mpi_random since it has
no particular connection to elliptic curves beyond the fact that its
operation is defined by the deterministic ECDSA specification. This is
a generic function that generates a random MPI between 1 inclusive and
N exclusive.
Slightly generalize the function to accept a different lower bound,
which adds a negligible amount of complexity.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for private key generation on short Weierstrass curves.
These tests validate that the result is within the desired range.
Additionally, they validate that after performing many iterations, the
range is covered to an acceptable extent: for tiny ranges, all values
must be reached; for larger ranges, all value bits must reach both 0
and 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't calculate the bit-size of the initially generated random number.
This is not necessary to reach the desired distribution of private
keys, and creates a (tiny) side channel opportunity.
This changes the way the result is derived from the random number, but
does not affect the resulting distribution.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The library rejected an RNG input of all-bits-zero, which led to the
key 2^{254} (for Curve25519) having a 31/32 chance of being generated
compared to other keys. This had no practical impact because the
probability of non-compliance was 2^{-256}, but needlessly
complicated the code.
The exception was added in 98e28a74e3 to
avoid the case where b - 1 wraps because b is 0. Instead, change the
comparison code to avoid calculating b - 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test the exact output from known RNG input. This is overly
constraining, but ensures that the code has good properties.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If a fallback is not explicitly configured in the
mbedtls_test_rnd_buf_info structure, fail after the buffer is
exhausted.
There is no intended behavior change in this commit: all existing uses
of mbedtls_test_rnd_buffer_rand() have been updated to set
mbedtls_test_rnd_std_rand as the fallback.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Commit removes the definition of
MBEDTLS_ECDH_LEGACY_CONTEXT from config.h.
Additionally removes the unset calls to
MBEDTLS_ECDH_LEGACY_CONTEXT in all.sh.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Remove tests related to NULL pointers,
keep tests related to invalid enum values.
Remove test code related to MBEDTLS_CHECK_PARAMS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
"test/helpers.h" defines MBEDTLS_ALLOW_PRIVATE_ACCESS. Drivers can include
that header instead of defining the MBEDTLS_ALLOW_PRIVATE_ACCESS themselves.
"test/helpers.h" includes config header as well. Remove obsolete config
includes from src/drivers.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Add HKDF tests where the sequence of inputs differs from the nominal
case: missing step, duplicate step, step out of order, or invalid step.
There were already similar tests for TLS 1.2 PRF. Add one with a key
agreement which has slightly different code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The call to `tests/scripts/generate_psa_tests.py` added by the commit
"generate_psa_tests.py: allow generating each file independently"
assumed that the `check` function supports multiple file names, but in
fact it does not do so. When `generate_psa_tests.py` started generating
more than one file, `check-generated-files.sh` did not detect changes to
files other than the first one listed by `generate_psa_tests.py --list`.
Fix this: change `check` to support either a single directory (with
detection of added/removed files) or a list of files (which is assumed
to be static).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In macro_collector.py, base InputsForTest on PSAMacroEnumerator rather
than PSAMacroCollector. It didn't make much sense to use
PSAMacroCollector anymore since InputsForTest didn't use anything
other than the constructor.
psa_generate_tests now generates arguments for more macros.
In particular, it now collects macro arguments from
test_suite_psa_crypto_metadata. Algorithms with parameters are now
supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
First build a list of all keys, then construct all the corresponding
test cases. This allows all required information to be obtained in
one go, which is a significant performance gain as the information
includes numerical values obtained by compiling a C program.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In generate_psa_tests, use InputsForTest rather than PSAMacroCollector
to gather values. This way, the enumeration of values to test includes
values used in metadata tests in addition to constructors parsed from
header files. This allows greater coverage of values built from
constructors with arguments. This doesn't make a difference yet, but
it will once algorithm constructors with arguments are supported in
generate_psa_tests.
Make the injection of numerical values optional. They are useful for
test_psa_constant_names, so keep them there. Don't use them for
not-supported tests: they might make sense, but the current code
wouldn't work since it doesn't know how to make up fake key material
or what dependencies to generate. Don't use them for storage tests:
they only make sense for supported values.
Don't inject 'PSA_SUCCESS': that's superfluous.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`mbedtls_test_hook_error_add` is referenced inside main_test.function.
Including the `error.h` is necessary to build suites which define both
MBEDTLS_TEST_HOOKS and MBEDTLS_ERROR_C, such as:
build_psa_accel_alg_ecdh
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Public structs members are considered private and should not
be used by users application.
MBEDTLS_PRIVATE(member) macro is intended to clearly indicate
which members are private.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
On space-constrained platforms, it is a useful configuration to be able
to import/export and perform RSA key pair operations, but to exclude RSA
key generation, potentially saving flash space. It is not possible to
express this with the PSA_WANT_ configuration system at the present
time. However, in previous versions of Mbed TLS (v2.24.0 and earlier) it
was possible to configure a software PSA implementation which was
capable of making RSA signatures but not capable of generating RSA keys.
To do this, one unset MBEDTLS_GENPRIME.
Since the addition of MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR, this
expressivity was lost. Expressing that you wanted to work with RSA key
pairs forced you to include the ability to generate key pairs as well.
Change psa_crypto_rsa.c to only call mbedtls_rsa_gen_key() if
MBEDTLS_GENPRIME is also set. This restores the configuration behavior
present in Mbed TLS v2.24.0 and earlier versions.
It left as a future exercise to add the ability to PSA to be able to
express a desire for a software or accelerator configuration that
includes RSA key pair operations, like signature, but excludes key pair
generation.
Without this change, linker errors will occur when attempts to call,
which doesn't exist when MBEDTLS_GENPRIME is unset.
psa_crypto_rsa.c.obj: in function `rsa_generate_key':
psa_crypto_rsa.c:320: undefined reference to `mbedtls_rsa_gen_key'
Fixes#4512
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
The test "PSA generate key: RSA, 1024 bits, good, encrypt (OAEP
SHA-256)" had a dependency on MBEDTLS_GENPRIME, but this was not listed
in the dependencies. Add MBEDTLS_GENPRIME to the test's dependencies to
ensure it has what it needs to run.
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Conflicts:
library/version_features.c
programs/test/query_config.c
Files were removed in development branch and modified by current branch.
Conflicts fixes by removing them.
CI was failing on check_params due to
MBEDTLS_RSA_PRIVATE being assigned to a now
superfluous variable. The variable has been
as well as another superfluous variable.
This should correct the CI issue.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Since generated files are no longer stored in the repository, they
don't need to be up-to-date before committing.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Re-create a component check_generated_files. Unlike the old one, which checked
that the generated files were up-to-date, the job of the new one is to check
that tests/scripts/check-generated-files.sh works (at least to the extent of
not errorring out).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Ensure that the .c files that generate_visualc_files.pl enumerates are present
before it runs. Otherwise, depending on the order in which make builds
targets, running `make generated_files` from a fresh checkout could end up
missing `library/error.c` and `library/version_features.c`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`check-generated-files -u` aborted if one of the generated files
didn't exist. Now it treats a missing file as an out-of-date file.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't regenerate configuration-independent files when config.h or
crypto_config.h changes. These files only depend on the set of symbols
present in the headers and not on which symbols are enabled. To avoid
rebuilding the generated files whenever the configuration changes,
don't declare the configuration as a dependency.
In the rare event that a maintainer makes an edit to *config.h that
affects the generated files, they'll have to remove the generated files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Now that generated source files are no longer checked in version
control, they must be generated before running any tests.
Do not check the generated files for freshness: it's no longer relevant.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Commit removes the mode parameter
from the mbedtls_rsa_rsassa_pss_verify_ext
function. This change is propagated
throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the f_rng parameter from
the mbedtls_rsa_rsassa_pss_verify_ext
function. This is in preparation for
the removal of the mode parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng parameter from the
mbedtls_rsa_rsassa_pss_verify_ext function
in preparation for removal of the mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter
from the mbedtls_rsa_rsassa_pss_verify
function and propagates the change
throughout the process.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes f_rng parameter from
mbedtls_rsa_rsassa_pss_verify function in
preparation of mode parameter removal.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng parameter from
mbedtls_rsa_rsassa_pss_verify function
as preparation for removing the mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes mode parameter from
mbedtls_rsa_rsassa_pkcs1_v15_verify and
propagates the change throughout the
codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit performs removal of f_rng parameter
from mbedtls_rsa_rsassa_pkcs1_v15_verify
function in preparation for removal of mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng from
mbedtls_rsa_rsassa_pkcs1_v15_verify function in
preparation of removal of mode parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Conflicts:
* configs/config-psa-crypto.h: modified here, removed in development
* tests/suites/test_suite_x509parse.data: all conflicts are in depends_on
lines where development made a change unrelated to MBEDTLS_SHAxxx and our
branch either changed `MBEDTLS_SHA256_C` to `MBEDTLS_SHA224_C` or
`MBEDTLS_SHA512_C:!MBEDTLS_SHA512_NO_SHA384` to ``MBEDTLS_SHA384_C`, with
no change to what the test does. Pick the other branch's dependency
changes then apply our SHA dpeendency change.
Commit removes mode parameter from
mbedtls_rsa_pkcs1_verify and propagates the
change throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng from mbedtls_rsa_pkcs1_verify
since p_rng has no relevance following the removal
of f_rng from this function.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes f_rng parameter from
mbedtls_rsa_pkcs1_verify as a prerequisite
to removing the mode parameter. f_rng no
longer has relevance in this function if
mode is removed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Relevant tests have been modified and
in some cases removed in preparation for
removal of mode parameter from verify
functions.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode param from
mbedtls_rsa_rsassa_pss_sign and propagates
the changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter from
mbedtls_rsa_rsassa_pkcs1_v15_sign and
propagates the change throughout the
codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
