Now, that the errors are not silently ignored
anymore, instead of expecting a <malformed>
tag in parsed data, the test case returns
an error.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Weierstrass key derivation still depends on ECP_C (no driver dispatch
yet), so the legacy dependency is still mandatory here.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
We keep tests without USE_PSA for single accel components (i.e.
ECDH, ECDSA, ECJPAKE), but when testing for all 3 accelerated
at the same time we use USE_PSA for better test coverage.
However for this purpose there is already the:
component_test_psa_crypto_config_[reference/accel]_all_ec_algs_use_psa()
so we can delete this extra component.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
All these EC based algs are now tested all at once in
test_psa_crypto_config_[accel/reference]_all_ec_algs_use_psa()
functions.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
Actually this adds both the accelerated test as well as the
reference. Both of them are used to evaluate the driver's
coverage with analyze_outcomes.py script.
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
TLS 1.2 has never been able to work with only SHA-512, it just happened
to pass previously because the declared dependencies were too lax.
(Probably related to the fact that in the past we didn't distinguish
between SHA-512 and SHA-384 in dependencies.)
So, just disable all of TLS in SHA-512-only builds. While at it, tune
build_info.h to make this easier - it already had partial support for
disabling TLS 1.2 or TLS 1.3 in an easier way, but not both of them at
the same time.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Now that Entropy doesn't need it any more, we can have driver-only
SHA-256 (and 224 with it) in the non-USE_PSA component too.
This reveals a missing PSA_INIT in a PK test using SHA-256.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Unless I missed something, all remaining instance of all macros are in
files where it makes sense to use these. I went over the output of:
git grep -c -E 'MBEDTLS_(MD5|RIPEMD160|SHA[0-9]*)_C'
and I think all the files listed fall into one of the following
acceptable categories:
- documentation and historical documents: Changelog, docs/**/*.md
- config files and related: mbedtls_config.h, configs/*.h,
check_config.h, config_psa.h, etc.
- scripts that build/modify configs: all.sh, depends.py,
set_psa_test_dependencies.py, etc.
- implementation of MD or PSA or related: md.h, psa_util.h, etc. and
corresponding test suites
- implementation of hashes: md5.c, sha256.h, etc. and corresponding test
suites
- two example programs using a low-level hash API: hash/hello.c,
pkey/ecdsa.c
- test/benchmark.c, test/selftest.c: actually want our built-in
implementations
- a function in test_suite_psa_crypto_storage_format that is
specifically for checking if the hash is built in.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
sed -i -f md.sed include/mbedtls/ssl.h library/hmac_drbg.c programs/pkey/*.c programs/x509/*.c tests/scripts/generate_pkcs7_tests.py tests/suites/test_suite_random.data
Then manually revert programs/pkey/ecdsa.c as it's using a low-level
hash API.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We only enable SHA-256, so let's use that.
Previously the entropy module was deciding which hash to use based on
MBEDTLS_xxx_C feature macros, and since only SHA256_C was defined in
config_test_driver.h, it used that and things worked.
However since entropy was changed to use MD light, and
MBEDTLS_MD_CAN_xxx feature macros, we had an issue: when building
libtestdriver1 with its default config, MBEDTLS_PSA_ACCEL_ALG_SHA_512 is
defined even though there's no actual accelerator in the build. (This is
done so that PSA_WANT_ALG_SHA_512 can remain defined in order to match
the application's config, while not defining
MBEDTLS_PSA_BUILTIN_ALG_SHA_512 in order to only include what we need in
the build of libtestdriver1.) This will cause MD to dispatch to PSA in
order to take advantage of the accelerator, which will then fail because
there is no accelerator not builtin for this hash.
In the long-term, perhaps it would be best to address the root of the
issue: defining MBEDTLS_PSA_ACCEL_ALG_SHA_512 in a build that doesn't
actually have a SHA-512 accelerator is a lie. But that would require
significant changes in libtestdriver1. So for now, just fix the most
obvious symptom (picking a non-supported hash in entropy.h) by forcing
the choice of hash to match what's in the libtestdriver1 config.
Note: if the copy of entropy module in libtestdriver1 doesn't work,
we'll get a failure when calling libtestdriver1_psa_crypto_init(), which
we do, from mbedtls_test_transparent_init(), indirectly called by our
psa_crypto_init() which will then fail.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
These were assuming that psa_crypto_init() doesn't call hashes, which is
not always correct.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Allow the script to also execute the tests needed for the following
analysis. It doesn't affect the previous usage of this script:
- if the output file is already present, then only the analysis
is performed
- if the outfile does not exists, then tests are also executed
before doing the analysis
Signed-off-by: Valerio Setti <valerio.setti@nordicsemi.no>
Split the part the varies between driver/built-in builds to a separate
file for convenience. Fix analyze_outcomes.py to be able to exclude
specific data files and not just a whole family at once.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
1. Change USE_PSA_CRYPTO_INIT/DONE to MD_OR_USE.
2. Add missing occurrences - some of these were already necessary in
principle (in one form or another) but where missing and this was not
detected so far as `psa_hash` doesn't complain in case of a missing
init, but now MD makes it visible.
3. Add missing include in ssl_test_lib.h.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Introduce MD_OR_USE_PSA_INIT/DONE. This will likely be used everywhere
in X.509 and SSL/TLS, but most places in PK only need USE_PSA_INIT/DONE.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
After this, only PK, X.509 and TLS remain to be done.
Deterministic uses HMAC-DRBG which uses MD, so it needs crypto_init()
when using a driver-only hash.
Also, remove a special-purpose macro that's no longer needed.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Could use MD_CAN, as both are equivalent when MBEDTLS_PSA_CRYPTO_C is
defined, but using PSA_WANT is preferable in a PSA context.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As a consequence, MD_C is now enabled in component accel_hash_use_psa.
Fix guards in X.509 info function to avoid this causing a failure now.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
sed -i -f md.sed library/pkcs12.c tests/suites/test_suite_pkcs12.* include/mbedtls/pkcs12.h
with md.sed as before.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This enables access to all available hashes, instead of the previous
situation where you had to choose by including MD_C or not.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
