This commit sets a loop_limit to omit AES-GCM-192 and AES-GCM-256
if MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH enabled.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
The configuration symbol MBEDTLS_AESNI_C requests AESNI support, but it is
ignored if the platform doesn't have AESNI. This allows keeping
MBEDTLS_AESNI_C enabled (as it is in the default build) when building for
platforms other than x86_64, or when MBEDTLS_HAVE_ASM is disabled.
To facilitate maintenance, always use the symbol MBEDTLS_AESNI_HAVE_CODE to
answer the question "can I call mbedtls_aesni_xxx functions?", rather than
repeating the check `defined(MBEDTLS_AESNI_C) && ...`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
gcm.c had a slightly different pattern for the conditional inclusion of
platform.h which didn't fit the general replacement. Simplify it manually.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Some source files had code to set mbedtls_xxx aliases when
MBEDTLS_PLATFORM_C is not defined. These aliases are defined unconditionally
by mbedtls/platform.h, so these macro definitions were redundant. Remove
them.
This commit used the following code:
```
perl -i -0777 -pe 's~#if !defined\(MBEDTLS_PLATFORM_C\)\n(#define (mbedtls|MBEDTLS)_.*\n|#include <(stdarg|stddef|stdio|stdlib|string|time)\.h>\n)*#endif.*\n~~mg' $(git grep -l -F '#if !defined(MBEDTLS_PLATFORM_C)')
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These issues were flagged by Coverity as instances where a local
variable may be used prior to being initialized. Please note that
none of these changes fixes any particular bug, this is just an attempt
to add more robustness.
Signed-off-by: Leonid Rozenboim <leonid.rozenboim@oracle.com>
Move GCM's update output buffer length verification
from PSA AEAD to the built-in implementation of the GCM.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
The GET macros used to write to a macro parameter, but now
they can be used to assign a value to the desired variable
rather than pass it in as an argument and have it modified
in the macro function.
Due to this MBEDTLS_BYTES_TO_U32_LE is the same as
MBEDTLS_GET_UINT32_LE and was there for replaced in the
appropriate files and removed from common.h
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
As per tests/scripts/check-names.sh, macros in
library/ header files should be prefixed with
MBEDTLS_
The macro functions in common.h where also indented
to comply with the same test
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
32-bit integer manipulation macros (big edian):
GET_UINT32_BE and PUT_UINT32_BE appear in several
files in library/.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Without this parameter, it would be hard for callers to know how many bytes
of output the function wrote into the output buffer. It would be possible,
since the cumulated output must have the same length as the cumulated input,
but it would be cumbersome for the caller to keep track.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To simplify the documentation, and because there are only two realistic
behaviors in practice, only allow two behaviors for multipart output:
immediate output, or buffering of the last partial block.
State some simple rules that applications can follow if they don't care about
the details.
Explicitly state how much output is needed for finish(). Only require the
buffer size to be the size of the actual output, not the size of the potential
output in the worst case. Rename the parameter from output_len to output_size
since it's a buffer size and not necessarily the length of the data.
No longer guarantee that the built-in implementation produces immediate
output.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The GCM interface now has separate functions to start the operation
and to pass the associated data.
This is in preparation for allowing the associated data to be passed
in chunks with repeatated calls to mbedtls_gcm_update_ad().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Alternative implementations of GCM may delay the output of partial
blocks from mbedtls_gcm_update(). Add an output length parameter to
mbedtls_gcm_update() to allow such implementations to delay the output
of partial blocks. With the software implementation, there is no such
delay.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Alternative implementations of GCM may delay the output of partial
blocks from mbedtls_gcm_update(). Add an output parameter to
mbedtls_gcm_finish() to allow such implementations to pass the final
partial block back to the caller. With the software implementation,
this final output is always empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_gcm_update now accepts inputs of arbitrary size. There is no
longer a requirement that all calls except the last one pass a
multiple of 16 bytes.
This commit updates the library code and adjusts the GCM tests to
exercise arbitrarily aligned input sizes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`aesni.h` is an internal header and is moved accordingly.
Also removes some references to internal headers in scripts with
only public headers.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In library source files, include "common.h", which takes care of
including "mbedtls/config.h" (or the alternative MBEDTLS_CONFIG_FILE)
and other things that are used throughout the library.
FROM=$'#if !defined(MBEDTLS_CONFIG_FILE)\n#include "mbedtls/config.h"\n#else\n#include MBEDTLS_CONFIG_FILE\n#endif' perl -i -0777 -pe 's~\Q$ENV{FROM}~#include "common.h"~' library/*.c 3rdparty/*/library/*.c scripts/data_files/error.fmt scripts/data_files/version_features.fmt
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
