The QueryPerformanceCounter implementation previously was within
defined(_MSC_VER), but it works just as well on other Windows
toolchains, like mingw.
For most common mingw x86 build configurations, one of the earlier
inline assembly implementations would end up used, but for non-x86
(arm, aarch64), it would end up falling back on the gettimeofday
implementation.
This implementation did build successfully (as mingw toolchains do
provide gettimeofday, contrary to MSVC), but the header providing
gettimeofday, <sys/time.h>, wasn't ever included when building
targeting Windows - thus the function was called without a proper
declaration.
Clang 15 changes such implicit function declarations into a hard
error by default, when building in C99 mode (or newer) [1].
(While Clang 15 still is under development, this may still change
before it's released, but it's a valid issue in any case.)
[1] 7d644e1215
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit modifies programs/test/selftest to include a check that
none of the standard integer types (unsigned) [short, int, long, long]
uses padding bits, which we currently don't support.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
time() is only needed to seed the PRNG non-deterministically. If it isn't
available, do seed it, but pick a static seed.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Allow programs/test/udp_proxy.c to build when MBEDTLS_HAVE_TIME is
not defined. In this case, do not attempt to seed the pseudo-random
number generator used to sometimes produce corrupt packets and other
erroneous data.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
At the end of the benchmark program, heap stats are printed, and these
stats will be wrong if we reset counters in the middle.
Also remove the function to reset counters, in order to encourage other
programs to behave correctly as well.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This no longer makes sense since pre-computed multiples of the base
point are now static. The function was not doing anything since `grp.T`
was set to `NULL` when exiting `ecp_mul_comb()` anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The "proper" fix would be to define the function only when it's needed,
but the condition for that would be tedious to write (enumeration of all
symmetric crypto modules) and since this is a utility program, not the
core library, I think it's OK to keep unused functions.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Non-regression for the fix in https://github.com/ARMmbed/mbedtls/pull/5126:
libmbedtls and libmbedx509 did not declare their dependencies on libmbedx509
and libmbedcrypto when built with make.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When the option is On, CMake will have rules to generate the generated
files using scripts etc. When the option is Off, CMake will assume the
files are available from the source tree; in that mode, it won't require
any extra tools (Perl for example) compared to when we committed the
files to git.
The intention is that users will never need to adjust this option:
- in the development branch (and features branches etc.) the option is
always On (development mode);
- in released tarballs, which include the generated files, we'll switch
the option to Off (release mode) in the same commit that re-adds the
generated files.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Declare all AES and DES functions that return int as needing to have
their result checked, and do check the result in our code.
A DES or AES block operation can fail in alternative implementations of
mbedtls_internal_aes_encrypt() (under MBEDTLS_AES_ENCRYPT_ALT),
mbedtls_internal_aes_decrypt() (under MBEDTLS_AES_DECRYPT_ALT),
mbedtls_des_crypt_ecb() (under MBEDTLS_DES_CRYPT_ECB_ALT),
mbedtls_des3_crypt_ecb() (under MBEDTLS_DES3_CRYPT_ECB_ALT).
A failure can happen if the accelerator peripheral is in a bad state.
Several block modes were not catching the error.
This commit does the following code changes, grouped together to avoid
having an intermediate commit where the build fails:
* Add MBEDTLS_CHECK_RETURN to all functions returning int in aes.h and des.h.
* Fix all places where this causes a GCC warning, indicating that our code
was not properly checking the result of an AES operation:
* In library code: on failure, goto exit and return ret.
* In pkey programs: goto exit.
* In the benchmark program: exit (not ideal since there's no error
message, but it's what the code currently does for failures).
* In test code: TEST_ASSERT.
* Changelog entry.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generate programs/test/cpp_dummy_build.cpp dynamically instead of
maintaining it manually. This removes the need to update it when the list of
headers changes.
Include all the headers unconditionally except for the ones that cannot be
included directly.
Support this dynamic generation both with make and with cmake.
Adapt all.sh accordingly. Remove the redundant C build from
component_build_default_make_gcc_and_cxx (it was also done in
component_test_default_out_of_box), leaving a component_test_make_cxx. Also
run the C++ program, because why not. Do this in the full configuration
which may catch a bit more problems in headers.
Fixes#2570 for good.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We previously introduced a safety check ensuring that if a datagram had
already been dropped twice, it would no longer be dropped or delayed
after that.
This missed an edge case: if a datagram is dropped once, it can be
delayed any number of times. Since "delay" is not defined in terms of
time (x seconds) but in terms of ordering with respect to other messages
(will be forwarded after the next message is forwarded), depending on
the RNG results this could result in an endless loop where all messages
are delayed until the next, which is itself delayed, etc. and no message
is ever forwarded.
The probability of this happening n times in a row is (1/d)^n, where d
is the value passed as delay=d, so for delay=5 and n=5 it's around 0.03%
which seems small but we still happened on such an occurrence in real
life:
tests/ssl-opt.sh --seed 1625061502 -f 'DTLS proxy: 3d, min handshake, resumption$'
results (according to debug statements added for the investigation) in
the ClientHello of the second handshake being dropped once then delayed
5 times, after which the client stops re-trying and the test fails for
no interesting reason.
Make sure this doesn't happen again by putting a cap on the number of
times we fail to forward a given datagram immediately.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Also remove preprocessor logic for MBEDTLS_CONFIG_FILE, since
build_info.h alreadyy handles it.
This commit was generated using the following script:
# ========================
#!/bin/sh
git ls-files | grep -v '^include/mbedtls/build_info\.h$' | xargs sed -b -E -i '
/^#if !?defined\(MBEDTLS_CONFIG_FILE\)/i#include "mbedtls/build_info.h"
//,/^#endif/d
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
The functions mbedtls_pk_sign(), mbedtls_pk_sign_restartable(),
mbedtls_ecdsa_write_signature() and mbedtls_ecdsa_write_signature_restartable()
now take an extra parameter indicating the size of the output buffer for the
signature.
No change to RSA because for RSA, the output size is trivial to calculate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add two functions mbedtls_dhm_get_len() and mbedtls_dhm_get_bitlen() to
query the length of the modulus in bytes or bits.
Remove the len field: the cost of calling mbedtls_dhm_get_len() each time
it's needed is negligible, and this improves the abstraction of the DHM
module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
include/mbedtls/ssl.h
include/psa/crypto_struct.h
Conflicts fixed by using the code from development branch
and manually re-applying the MBEDTLS_PRIVATE wrapping.
Remove padding parameters as mbedtls_rsa_init()
cannot return an error code when padding
parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This change enables automatic detection and consumption of Mbed TLS
library targets from within other CMake projects. By generating an
`MbedTLSConfig.cmake` file, consuming projects receive a more complete
view of these targets, allowing them to be used as dependencies which
properly inherit the transitive dependencies of the libraries.
This is fairly fragile, as it seems Mbed TLS's libraries do not appear
to properly model their dependencies on other targets, including
third-party dependencies. It is, however, sufficient for building and
linking the compiled Mbed TLS libraries when there are no third-party
dependencies involved. Further work is needed for more complex
use-cases, but this will likely meet the needs of most projects.
Resolves#298. Probably useful for #2857.
Signed-off-by: Chris Kay <chris.kay@arm.com>
MBEDTLS_ECP_FIXED_POINT_OPTIM aims to speed up ecc multiplication performance.
We compute the comb table in runtime now. It is a costly operation.
This patch add a pre-computed table to initialize well-known curves. It speed up ECDSA signature verify process in runtime by using more ROM size.
Signed-off-by: kXuan <kxuanobj@gmail.com>
The introduction of positive options to control the presence
of pre-existing functionality breaks the build for users of
handwritten configurations.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Introduce MBEDTLS_X509_INFO to indicate the availability of the
mbedtls_x509_*_info() function and closely related APIs. When this is
not defined, also omit name and description from
mbedtls_oid_descriptor_t, and omit OID arrays, macros, and types that
are entirely unused. This saves several KB of code space.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
According to the design in psa-driver-interface.md. Compiles without
issue in test_psa_crypto_drivers.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
`entropy_poll.h` and `md_wrap.h` were still being used in some of the
example programs. As these headers are now internal, remove their
references and replace them with publicly available functions.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`entropy_poll.h` is not supposed to be used by application code and
is therefore being made internal.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
