Remove cookie support from server side
Change code to align with coding styles
Re-order functions of client_hello
Change-Id: If31509ece402f8276e6cac37f261e0b166d05e18
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
This both simplifies parsing a little, and suppresses warnings. Suppressing
warnings is both good and bad: on the one hand it resolves problems such as
https://github.com/Mbed-TLS/mbedtls/issues/5731, on the other hand it may
hide clues as to why lsof wouldn't be working as expected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A concurrent branch changes the way the test cases run to no longer use
force_version=tls13, so the automatic version requirement detection will no
longer work after that branch is merged. Therefore, keep the manual
requirement (at least until automatic detection gets smarter).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When the client or server uses a specific protocol version, automatically
require that version to be enabled at compile time.
An explicit call is still needed in test cases that require a specific
protocol version (due to analyzing version-specific behavior, or checking
the version in logs), but do not force that specific protocol version, or that
force a specific version only on the openssl/gnutls side.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename maybe_requires_ciphersuite_enabled() to detect_required_features()
and refactor its code a little. No intended behavior change. In subsequent
commits, this function will detect other requirements in a similar way.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't depend on the default sizes in the test programs: pass explicit
request and buffer sizes.
Don't depend on MAX_CONTENT_LEN (other than it not being extremely small:
this commit assumes that it will never be less than 101).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For TLS 1.3 tests, do not force TLS 1.3
version on client to play the negotiation
game whenever possible.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
To maximize the number of tests where MbedTLS
client proposes both TLS 1.2 and TLS 1.3 to
the server, force the TLS 1.2 version on the
server side rather than on the client side
in TLS 1.2 specific tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Some DTLS reordering tests rely on certificate authentication messages. It
is probably possible to adapt them to rely on different messages, but for
now, skip them in PSK-only builds.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If MBEDTLS_SSL_EXTENDED_MASTER_SECRET is disabled or the feature is disabled
at runtime, and if client authentication is not used, then calc_verify is not
called, so don't require the corresponding debug trace.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The message was removed in 6be9cf542f without
a replacement. A failure would cause the test case to fail anyway, so this
negative check is not really useful.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In a PSK-only build:
* Skip tests that rely on a specific non-PSK cipher suite.
* Skip tests that exercise a certificate authentication feature.
* Pass a pre-shared key in tests that don't mind the key exchange type.
This commit only considers PSK-only builds vs builds with certificates. It
does not aim to do something useful for builds with an asymmetric key
exchange and a pre-shared key for authentication.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These tests ensure that a certain cipher suite is in use, so they fail in
builds that lack one of the corresponding algorithms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Sign rsa is not thread safe. Remove it from current code.
And a thread-safe version should be re-introduce in future.
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Move reset transcript for hrr to generic
Reset SHA256 or SHA384 other than both
Rename message layer reset
Add check log for hrr parse successfully
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
If no key is loaded in a slot, say "none", not "invalid PK".
When listing two key types, use punctuation that's visibly a sequence
separator (",").
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add a positive test case where both the client and the server require
authentication and both use a non-CA self-signed certificate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the outcome file, report each test case in the file it's in, rather than
reporting them all from ssl-opt. This is more informative and matches what
check_test_cases.py does.
This fixes a bug whereby test cases from opt-testcases/* were not detected
as having run on the CI, because analyze_outcomes.py (which uses
check_test_cases.py) expects them in the containing file whereas they were
reported in ssl-opt.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
As we have now a minimal viable implementation of TLS 1.3,
let's remove EXPERIMENTAL from the config option enabling
it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Run tests with middlebox compatibility enabled but tests
dedicated to middlebox compatibility disabled.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove useless component in all.sh
Remove use server logs in ssh-opt.sh
Remove useless guards in ssl_client2.c
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Change client test code to support rsa pss signatures
Add test cases for rsa pss signature in ssl-opt.sh
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Remove client certificate verify in tests.
Change the layout of structure to fix abi_api check issues.
Add comments of Finished.
Align with the coding styles.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Change debug messag for server finished.
Change name of generate_application_keys.
Remove the client vertificate tests from ssl-opt.sh.
Add test strings for server finished in ssl-opt.sh.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Use case pattern matching instead of multiline split, given there is
only the well formatted PIDs to match on this should be safe.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Improve the code structure in case we want to add other similar conditions
later. Document better what we're doing, and document why we're doing it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
On machines with more modern kernels (>5.4 from testing so far) the
useage of -b seems to conflict with the usage of -p. Whilst the usage of
-b seems like a good idea to avoid blocks as we are tight looping on it,
the usage of -p seems to require the usage of stat() (specifically in
/proc) which -b forbids. All you get is a load of warnings
(suppressable by -w) but never a positive result, which means that all
servers are reported as "Failed to start". We are not keen on losing
-b, so instead parse the output of lsof (using -F to format it) to
check the if PIDs that it outputs match that we are looking for.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Palliative for https://github.com/ARMmbed/mbedtls/issues/3377. If a test
case fails due to an unexpected resend, allow retrying, like in the case of
a client timeout.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This was causing some tests using the openssl s_client to not connect -
I suspect this was due to localhost (at least on my machine) resolving
to ::1 rather than 127.0.0.1. Note that the error seen would have been
that the session file specified with -sess_out did not get created.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Missing wildcards meant that some servers were not identified as DTLS,
which lead to port checking on TCP rather than UDP, and thus mistakenly
cancelling tests as the server had not come up.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
This option only gated an ability to set a callback,
but was deemed unnecessary as it was yet another define to
remember when writing tests, or test configurations. Fixes#4653.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Those tests are so far only checking that ssl_client2/ssl_server2
recognize the arguments, nothing more.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Add functions and test cases to make sure
tls1.3 is available in openssl/gnutls
Change-Id: I797d15117a8de96614f392e6bb2ed16b6d71ba69
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Base on version config, `handshack_{clinet,server}_step`
will call different step function. TLS1.3 features will
be gradully added base on it.
And a new test cases is added to make sure it reports
`feature is not available`.
Change-Id: I4f0e36cb610f5aa59f97910fb8204bfbf2825949
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
tls1.3 and tls1.2 can not be enabled at same
time before #4832 resolved.
And the test won't run into `handshake` stage, add
`skip_handshak_check` function to skip it.
Change-Id: I13f3b06b2f33b9c9beb8cac90f5fda41a4ed53f3
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
- Reword the comment on config.h to suggest that
`MAX_INTERMEDIATE_CA` may not exist in the config.
- Add a comment explaining why the tests are more restrictive
than necessary.
Signed-off-by: Yuto Takano <yuto.takano@arm.com>
- Abstract out repetitive checks for IN and OUT content lens
- Remove unclear comment and redundant echo
- Add content length constraints in Renegotiation with fragment length test
Signed-off-by: Yuto Takano <yuto.takano@arm.com>
- Replace last remaining dependency on config.py with query_config
- Replace hard exit with `requires_config_value_at_least` and
`requires_config_value_at_most` to maintain the same effect
Signed-off-by: Yuto Takano <yuto.takano@arm.com>
- Replace calls to config.py for MAX_IN_LEN and MAX_OUT_LEN with
`get_config_value_or_default`
- Remove hard exit when MAX_IN/OUT_LEN < 4096, replace with
`requires_config_value_at_least`
Signed-off-by: Yuto Takano <yuto.takano@arm.com>
Update maybe_requires_ciphersuite_enabled so that it will not skip the
ciphersuite requirement when running a test case where the test expects
a ciphersuite mismatch
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
The default curve is now Curve25519, which doesn't support restartable ECC.
So run the restartable ECC tests with a curve that does support it. Use
secp256r1 which is required for these tests anyway for the server's
certificate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Commit removes tests from ssl-opt.sh
that were specific to
MBEDTLS_SSL_TRUNCATED_HMAC extention.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit removes the API
```
mbedtls_ssl_conf_ciphersuites_for_version()
```
which allows to configure lists of acceptable ciphersuites
for each supported version of SSL/TLS: SSL3, TLS 1.{0,1,2}.
With Mbed TLS 3.0, support for SSL3, TLS 1.0 and TLS 1.1
is dropped. Moreover, upcoming TLS 1.3 support has a different
notion of cipher suite and will require a different API.
This means that it's only for TLS 1.2 that we require
a ciphersuite configuration API, and
```
mbedtls_ssl_conf_ciphersuites()
```
can be used for that. The version-specific ciphersuite
configuration API `mbedtls_ssl_conf_ciphersuites_for_version()`,
in turn, is no longer needed.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Our interoperability tests fail with a recent OpenSSL server. The
reason is that they force 1024-bit Diffie-Hellman parameters, which
recent OpenSSL (e.g. 1.1.1f on Ubuntu 20.04) reject:
```
140072814650688:error:1408518A:SSL routines:ssl3_ctx_ctrl:dh key too small:../ssl/s3_lib.c:3782:
```
We've been passing custom DH parameters since
6195767554 because OpenSSL <=1.0.2a
requires it. This is only concerns the version we use as
OPENSSL_LEGACY. So only use custom DH parameters for that version. In
compat.sh, use it based on the observed version of $OPENSSL_CMD.
This way, ssl-opt.sh and compat.sh work (barring other issues) for all
our reference versions of OpenSSL as well as for a modern system OpenSSL.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An SSL client can be configured to insist on a minimum size for the
Diffie-Hellman (DHM) parameters sent by the server. Add several test
cases where the server sends parameters with exactly the minimum
size (must be accepted) or parameters that are one bit too short (must
be rejected). Make sure that there are test cases both where the
boundary is byte-aligned and where it isn't.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For calls to gnutls-serv and gnutls-cli where --priority is not
specified, explicitly add the default value: --priority=normal. This is
needed for some tests on Ubuntu 20.04 (gnutls 3.6.13).
For example:
./ssl-opt.sh -f "DTLS fragmenting: gnutls.*1.0"
requires this PR to work on Ubuntu 20.04
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
We care about the exit code of our server, for example if it's
reporting a memory leak after having otherwise executed correctly.
We don't care about the exit code of the servers we're using for
interoperability testing (openssl s_server, gnutls-serv). We assume
that they're working correctly anyway, and they return 1 (gnutls-serv)
or die by the signal handle the signal (openssl) when killed by a
signal.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This used to be the case a long time ago but was accidentally broken.
Fix <github:nogrep> #4103 for ssl-opt.sh.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
