Add an API for byte generators: psa_crypto_generator_t,
PSA_CRYPTO_GENERATOR_INIT, psa_crypto_generator_init,
psa_get_generator_capacity, psa_generator_read,
psa_generator_import_key, psa_generator_abort.
This commit does not yet implement any generator algorithm, it only
provides the framework. This code may not compile with -Wunused.
In psa_mac_setup and psa_hmac_setup_internal, perform a sanity check
on the hash size and the hash block size respectively. These sanity
checks should only trigger on an incompletely or incorrectly
implemented hash function.
Remove the check on the block size in psa_hmac_finish_internal
because at this point it has already been checked and used.
In the common case (key no longer than the block size), psa_hash_setup
was being called twice in succession. With current implementations
this is just a small performance loss, but potentially with
alternative implementations this could have lead to a memory leak.
Call psa_hash_setup in psa_hmac_setup_internal rather than
psa_mac_init. This makes it easier to use psa_hmac_setup_internal on
its own (for the sake of using HMAC internally inside the library).
Create internal functions for HMAC operations. This prepares for two
things: separating crypto-sensitive code from argument decoding and
validation, and using HMAC for other purposes than a MAC inside the
library (e.g. HMAC_DRBG, HKDF).
No intended observable behavior change in this commit.
Although RSASSA-PSS defines its input as a message to be hashed, we
implement a sign-the-hash function. This function can take an input
which isn't a hash, so don't restrict the size of the input, any more
than Mbed TLS does.
Remove a redundant check that hash_length fits in unsigned int for the
sake of Mbed TLS RSA functions.
Test that PSS accepts inputs of various lengths. For PKCS#1 v1.5
signature in raw mode, test the maximum input length.
No common signature algorithm uses a salt (RSA-PKCS#1v1.5, RSA-PSS,
DSA, ECDSA, EdDSA). We don't even take an IV for MAC whereas MAC
algorithms with IV are uncommon but heard of. So remove the salt
parameter from psa_asymmetric_sign and psa_asymmetric_verify.
We failed all.sh on the "test: doxygen markup outside doxygen blocks" due
to doxygen markup being outside a Doxygen block. Add an extra `*` to the
psa_get_key_from_slot comment to denote the comment as a Doxygen comment.
Make function names for multipart operations more consistent (cipher
edition).
Rename symmetric cipher multipart operation functions so that they all
start with psa_cipher_:
* psa_encrypt_setup -> psa_cipher_encrypt_setup
* psa_decrypt_setup -> psa_cipher_decrypt_setup
* psa_encrypt_set_iv -> psa_cipher_set_iv
* psa_encrypt_generate_iv -> psa_cipher_generate_iv
Use if-else-if chains rather than switch because many blocks apply to
a class of algoritmhs rather than a single algorithm or a fixed set
of algorithms.
Call abort on more error paths that were missed earlier.
Reorganize error handling code in psa_mac_finish_internal,
psa_mac_sign_finish and psa_mac_verify finish to ensure that:
* psa_mac_abort() is always called, on all success and error paths.
* psa_mac_finish places a safe value in the output parameters on
all error paths, even if abort fails.
Make function names for multipart operations more consistent (MAC
setup edition).
Split psa_mac_setup into two functions psa_mac_sign_setup and
psa_mac_verify_setup. These functions behave identically except that
they require different usage flags on the key. The goal of the split
is to enforce the key policy during setup rather than at the end of
the operation (which was a bit of a hack).
In psa_mac_sign_finish and psa_mac_verify_finish, if the operation is
of the wrong type, abort the operation before returning BAD_STATE.
Isolate the code of psa_get_key_information that calculates the bit
size of a key into its own function which can be called by functions
that have a key slot pointer.
Add required includes in tests and psa_crypto.c file in order to be able to compilef for the SPM solution.
Some functions needed to be deprecated from psa_crypto.c since they already implemented in the SPM.
New functions psa_get_key_slot(), psa_get_empty_key_slot(),
psa_get_key_from_slot() to access a key slot object from a key slot
number. These functions perform all requisite validations:
* psa_get_key_slot() verifies that the key slot number is in range.
* psa_get_empty_key_slot() verifies that the slot is empty.
* psa_get_key_from_slot() verifies that the slot contains a key with
a suitable policy.
Always use these functions so as to make sure that the requisite
validations are always performed.
In psa_hash_finish and psa_mac_finish_internal, set the fallback
output length (which is reported on error) to the output buffer size,
not to the _expected_ buffer size which could be larger.
When the size of a buffer is 0, the corresponding pointer argument may
be null. In such cases, library functions must not perform arithmetic
on the pointer or call standard library functions such as memset and
memcpy, since that would be undefined behavior in C. Protect such
cases.
Refactor the storage of a 0-sized raw data object to make it store a
null pointer, rather than depending on the behavior of calloc(1,0).
The RSA module uses unsigned int for hash_length. The PSA Crypto API
uses size_t for hash_length. Cast hash_length to unsigned int when
passed to the hash module.
The GCM, CCM, RSA, and cipher modules inconsistently use int or unsigned
int for a count of bits. The PSA Crypto API uses size_t for counting
things. This causes issues on LLP64 systems where a size_t can hold more
than an unsigned int. Add casts for where key_bits and bits are passed to
mbedtls_* APIs.
Use size_t for block_size in psa_mac_abort() because
psa_get_hash_block_size() returns a size_t. This also helps to avoid
compiler warnings on LLP64 systems.
To avoid a possible loss of precision, and to be semantically correct,
use psa_key_slot_t (which is 16 bits) instead of size_t (which is 32 or
64 bits on common platforms) in mbedtls_psa_crypto_free().
Previously, the psa_set_key_lifetime() implementation did not match the
function declaration in psa/crypto.h. Value types don't need const,
since they are passed by value. Fix psa_set_key_lifetime()
implementation by making it match its declaration in the header.
This requires defining a maximum RSA key size, since the RSA key size
is the signature size. Enforce the maximum RSA key size when importing
or generating a key.
Fill the unused part of the output buffer with '!', for consistency
with hash and mac.
On error, set the output length to the output buffer size and fill the
output buffer with '!', again for consistency with hash and mac. This
way an invalid output is more visible in a memory dump.
Restructure the error paths so that there is a single place where the
unused part of the output buffer is filled.
Also remove a redundant initialization of *signature_length to 0.
Change the representation of an ECDSA signature from the ASN.1 DER
encoding used in TLS and X.509, to the concatenation of r and s
in big-endian order with a fixed size. A fixed size helps memory and
buffer management and this representation is generally easier to use
for anything that doesn't require the ASN.1 representation. This is
the same representation as PKCS#11 (Cryptoki) except that PKCS#11
allows r and s to be truncated (both to the same length), which
complicates the implementation and negates the advantage of a
fixed-size representation.
* Distinguish randomized ECDSA from deterministic ECDSA.
* Deterministic ECDSA needs to be parametrized by a hash.
* Randomized ECDSA only uses the hash for the initial hash step,
but add ECDSA(hash) algorithms anyway so that all the signature
algorithms encode the initial hashing step.
* Add brief documentation for the ECDSA signature mechanisms.
* Also define DSA signature mechanisms while I'm at it. There were
already key types for DSA.
* PSS needs to be parametrized by a hash.
* Don't use `_MGF1` in the names of macros for OAEP and PSS. No one
ever uses anything else.
* Add brief documentation for the RSA signature mechanisms.
Make psa_export_key() always set a valid data_length when exporting,
even when there are errors. This makes the API easier to use for buggy
programs (like our test code).
Our test code previously used exported_length uninitialized when
checking to see that the buffer returned was all zero in import_export()
in the case where an error was returned from psa_export_key().
Initialize exported_length to an invalid length, and check that it gets
set properly by psa_export_key(), to avoid this using export_length
uninitialized. Note that the mem_is_zero() check is still valid when
psa_export_key() returns an error, e.g. where exported_length is 0, as
we want to check that nothing was written to the buffer on error.
Out test code also previous passed NULL for the data_length parameter of
psa_export_key() when it expected a failure (in key_policy_fail()).
However, data_length is not allowed to be NULL, especially now that we
write to data_length from psa_export_key() even when there are errors.
Update the test code to not pass in a NULL data_length.
psa_hash_abort, psa_mac_abort and psa_cipher_abort now return
PSA_ERROR_BAD_STATE if operation->alg is obviously not valid, which
can only happen due to a programming error in the caller or in the
library. We can't detect all cases of calling abort on uninitialized
memory but this is dirt cheap and better than nothing.
It isn't used to define other macros and it doesn't seem that useful
for users. Remove it, we can reintroduce it if needed.
Define a similar function key_type_is_raw_bytes in the implementation
with a clear semantics: it's a key that's represented as a struct
raw_data.
Also add what was missing in the test suite to support block ciphers
with a block size that isn't 16.
Fix some buggy test data that passed only due to problems with DES
support in the product.
In psa_hash_start, psa_mac_start and psa_cipher_setup, return
PSA_ERROR_INVALID_ARGUMENT rather than PSA_ERROR_NOT_SUPPORTED when
the algorithm parameter is not the right category.
When psa_mac_start(), psa_encrypt_setup() or psa_cipher_setup()
failed, depending on when the failure happened, it was possible that
psa_mac_abort() or psa_cipher_abort() would crash because it would try
to call a free() function uninitialized data in the operation
structure. Refactor the functions so that they initialize the
operation structure before doing anything else.
Add non-regression tests and a few more positive and negative unit
tests for psa_mac_start() and psa_cipher_setup() (the latter via
psa_encrypt_setip()).
In psa_export_key, ensure that each byte of the output buffer either
contains its original value, is zero, or is part of the actual output.
Specifically, don't risk having partial output on error, and don't
leave extra data at the end of the buffer when exporting an asymmetric
key.
Test that exporting to a previously zeroed buffer leaves the buffer
zeroed outside the actual output if any.
Exporting an asymmetric key only worked if the target buffer had
exactly the right size, because psa_export_key uses
mbedtls_pk_write_key_der or mbedtls_pk_write_pubkey_der and these
functions write to the end of the buffer, which psa_export_key did not
correct for. Fix this by moving the data to the beginning of the
buffer if necessary.
Add non-regression tests.
psa_import_key must check that the imported key data matches the
expected key type. Implement the missing check for EC keys that the
curve is the expected one.
Avoid lines longer than 80 columns.
Remove some redundant parentheses, e.g. change
if( ( a == b ) && ( c == d ) )
to
if( a == b && c == d )
which makes lines less long and makes the remaining parentheses more
relevant.
Add missing parentheses around return statements.
There should be no semantic change in this commit.
Store the temporary key in the long-key case (where the key is first
hashed) directly into ipad. This reduces the stack usage a little, at
a slight cost in complexity.
In psa_mac_start, the hash of the key and ipad contain material that
can be used to make HMAC calculations with the key, therefore they
must be wiped.
In psa_mac_finish_internal, tmp contains an intermediate value which
could reveal the HMAC. This is definitely sensitive in the verify case,
and marginally sensitive in the finish case (it isn't if the hash
function is ideal, but it could make things worse if the hash function
is partially broken).
Split algorithm-specific code out of psa_mac_start. This makes the
function easier to read.
The behavior is mostly unchanged. In a few cases, errors before
setting a key trigger a context wipe where they didn't. This is a
marginal performance loss but only cases that are an error in caller
code.
