Use escape mechanism defined in RFC 1779 when parsing commas and other
special characters in X509 DN values. Resolves failures when generating
a certificate with a CSR containing a comma in subject value.
Fixes#769.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
In Certificate message parsing tests with
invalid vector lengths, add checks that the
parsing failed on the expected overread check.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In "Authentication: client cert not trusted,
server required" ssl-opt.sh test, depending
on client and server execution speed, the
handshake on the client side may complete
successfully: the TLS connection is aborted
by the server because it is not able to
authenticate the client but at that time
the client may have completed the handshake
on its side. Thus, do not check that the
client handshake failed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The other "Event-driven I/O" tests are not relevant
to TLS 1.3 yet: no ticket and session resumption
support.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The other "Non-blocking I/O" tests are not relevant
to TLS 1.3 yet: no ticket and session resumption
support.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Those are adaptations of the already existing
TLS 1.2 tests. It is not really possible to just
remove the TLS 1.2 dependency of the existing tests
because of the following:
. in TLS 1.3 the ciphersuite selection on server
side is not related to the server certificate
. for tests involving OpenSSL the OpenSSL command line
as to be adapted to TLS 1.3
. server authentication is mandatory in TLS 1.3
. a key with KeyEncipherment and not DigitalSignature
usage is never acceptable
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In asn1_write tests, when there's a parsing function corresponding to the
write function, call it and check that it can parse what we wrote.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Previously, the transforms were populated before extension
parsing, which resulted in the client rejecting a server
hello that contained a connection ID.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Test with the output buffer size up to *and including* the expected output
size plus one. `... < expected->len + 1` was evidently a mistake.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_asn1_write_mpi() correctly handles the sign bit, so there's no
reason not to test that it's handled correctly.
Fix copypasta in test data that was commented out.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a null pointer dereference when performing some operations on zero
represented with 0 limbs: mbedtls_mpi_mod_int() dividing by 2, or
mbedtls_mpi_write_string() in base 2.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
That way the concerned tests are also run in the
TLS 1.3 only configuration where a TLS 1.3
handshake is performed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The endpoint initialization function was setting up
a certificate but the client certificate was not
used because client authentication was not enabled
(not enabled in the default SSL server configuration).
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When executing eval in the background, the next "$!" gives the
eval PID, not the ssl-client2 pid. This causes problems when
a client times out and the script tries to kill it. Instead, it
kills the parent eval call.
This caused problems with subsequent proxy tests receiving
old packets from a client from a previous test.
Moving the "&" to inside the eval call fixes the problem.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Functions called within the test mean that MBEDTLS_X509_CRT_PARSE_C
is a test dependency and so is declared in this commit.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Move the definition of the accessor so that it is not defined
within the MBEDTLS_X509_CRT_WRITE_C guards. Thus remove the
dependency from the test and test cases.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Add two test cases for accessor test. One test where desired
ext type is presentent and the other of when the ext type is
not present.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Update to a branch with a fix for the test case
"expected error for psa_raw_key_agreement - Small buffer size"
since we just fixed the corresponding bug.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Systematically replace "TEST_ASSERT( $x <= $y )" by "TEST_LE_U( $x, $y )" in
test_suite_psa_crypto. In this file, all occurrences of this pattern are
size_t so unsigned.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test assertions for integer comparisons that display the compared values on
failure. Similar to TEST_EQUAL.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We want to check:
1. actual output <= PSA_RAW_KEY_AGREEMENT_OUTPUT_SIZE (the output fits
if the caller uses the key-specific buffer size macro)
2. actual output <= PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE (the output fits
if the caller uses the generic buffer size macro)
3. PSA_RAW_KEY_AGREEMENT_OUTPUT_SIZE <= PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE
(consistency in the calculation)
We were only testing (1) and (2). Test (3) as well. (1) and (3) together
imply (2) so there's no need to test (2).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remaining hits seem to be hex data, certificates,
and other miscellaneous exceptions.
List generated by running codespell -w -L
keypair,Keypair,KeyPair,keyPair,ciph,nd
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Remove no_supported HMAC generate/import tests when !PSA_KEY_TYPE_HMAC as HMAC key creation works regardless of PSA_WANT_KEY_TYPE_HMAC.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Removes a case in mbedtls_asn1_named_data() where memcpy() could be
called with a null pointer and zero length. A test case is added for
this code path, to catch the undefined behavior when running tests with
UBSan.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Adds two comments to clarify 1) why an offset is used
in the call to psa_aead_verify() and 2) why the test of
.hits_finish is always 0 in this test case.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
For multipart encrpytion, call psa_cipher_finish(). This is not actually
necessary for non-pathological implementations of ECB (the only currently
supported IV-less cipher algorithm) because it requires the input to be a
whole number of blocks and non-pathological implementations emit the output
block from update() as soon as an input block is available. But in principle
a driver could delay output and thus require a call to finish().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Validate the size macros directly from the output length in the test data,
rather than using the value returned by the library. This is equivalent
since the value returned by the library is checked to be identical.
Enforce that SIZE() <= MAX_SIZE(), in addition to length <= SIZE(). This is
stronger than the previous code which merely enforced length <= SIZE() and
length <= MAX_SIZE().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Motivated by CVE-2022-21449, to which we're not vulnerable, but we
didn't have a test for it. Now we do.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Remove cookie support from server side
Change code to align with coding styles
Re-order functions of client_hello
Change-Id: If31509ece402f8276e6cac37f261e0b166d05e18
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
This both simplifies parsing a little, and suppresses warnings. Suppressing
warnings is both good and bad: on the one hand it resolves problems such as
https://github.com/Mbed-TLS/mbedtls/issues/5731, on the other hand it may
hide clues as to why lsof wouldn't be working as expected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_test_cmake_out_of_source was running the ssl-opt.sh test case
"Fallback SCSV: beginning of list", but this test case was removed in Mbed
TLS 3.0, so ssl-opt.sh was running nothing, which is not an effective test.
In 2.x, the test case was chosen because it uses an additional auxiliary
program tests/scripts/tcp_client.pl. This auxiliary program is no longer
used. So instead, run at least one test case that's sure to exist.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We test some configurations using drivers where the driver doesn't
support certain hash algorithms, but declares that it supports
compound algorithms that use those hashes. Until this is fixed,
in those configurations, don't try to actually perform operations.
The built-in implementation of asymmetric algorithms that use a
hash internally only dispatch to the internal md module, not to
PSA. Until this is supported, don't try to actually perform
operations when the operation is built-in and the hash isn't.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, len) == aead_alg` when
`len == PSA_AEAD_TAG_LENGTH(aead_alg)`. So skip this case when testing
the printing of constants.
This fixes one test case due to the way arguments of
`PSA_ALG_AEAD_WITH_SHORTENED_TAG` are enumerated (all algorithms are tested
for a value of `len` which isn't problematic, and all values of `len` are
tested for one algorithm).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There's nothing wrong with ECC keys on Brainpool curves,
but operations with them are very slow. So we only exercise them
with a single algorithm, not with all possible hashes. We do
exercise other curves with all algorithms so test coverage is
perfectly adequate like this.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
RSA-OAEP requires the key to be larger than a function of the hash size.
Ideally such combinations would be detected as a key/algorithm
incompatibility. However key/algorithm compatibility is currently tested
between the key type and the algorithm without considering the key size, and
this is inconvenient to change. So as a workaround, dispense
OAEP-with-too-small-hash from exercising, without including it in the
automatic operation-failure test generation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't try to use {sign,verify}_message on algorithms that only support
{sign_verify}_hash. Normally exercise_key() tries all usage that is
supported by policy, however PSA_KEY_USAGE_{SIGN,VERIFY}_MESSAGE is implied
by PSA_KEY_USAGE_{SIGN,VERIFY}_HASH so it's impossible for the test data to
omit the _MESSAGE policies with hash-only algorithms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't re-code the logic to determine a valid nonce length.
This fixes exercise_key() for PSA_ALG_CHACHA20_POLY1305, which was trying to
use a 16-byte nonce.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support ECB, which has no IV. The code also now supports arbitrary IV
lengths based on the algorithm and key type.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In key read tests, add usage flags that are suitable for the key type and
algorithm. This way, the call to exercise_key() in the test not only checks
that exporting the key is possible, but also that operations on the key are
possible.
This triggers a number of failures in edge cases where the generator
generates combinations that are not valid, which will be fixed in subsequent
commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This currently makes all the descriptions unambiguous even when truncated at
66 characters, as the unit test framework does.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The output of generate_psa_tests.py is almost unchanged: the differences are
only spaces after commas (now consistently omitted).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When generating storage format tests, pass usage flags around as a list, and
format them as the last thing.
In Storagekey(), simplify the addition of implicit usage flags: this no
longer requires parsing.
The output is unchanged.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the generated storage format test cases, cover all supported
algorithms for each key type. This is a step towards exercising
the key with all the algorithms it supports; a subsequent commit
will generate a policy that permits the specified algorithms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use the new generic is_public method.
Impact on generated cases: there are new HMAC test cases for SIGN_HASH. It
was a bug that these test cases were previously not generated.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
remove use of MBEDTLS_SSL_MINOR_VERSION_*
remove use of MBEDTLS_SSL_MAJOR_VERSION_*
(only remaining use is in tests/suites/test_suite_ssl.data)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible, as the struct is now smaller.
Reduce size of mbedtls_ssl_ciphersuite_t
members are defined using integral types instead of enums in
order to pack structure and reduce memory usage by internal
ciphersuite_definitions[]
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible on little-endian platforms,
but is compatible on big-endian platforms. For systems supporting
only TLSv1.2, the underlying values are the same (=> 3).
New setter functions are more type-safe,
taking argument as enum mbedtls_ssl_protocol_version:
mbedtls_ssl_conf_max_tls_version()
mbedtls_ssl_conf_min_tls_version()
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version instead of minor version number in tls_version.
Note: struct member size changed from unsigned char to uint16_t
Due to standard structure padding, the structure size does not change
unless alignment is 1-byte (instead of 2-byte or more)
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is compatible on little-endian platforms,
but not compatible on big-endian platforms. The enum values for
the lower byte of MBEDTLS_SSL_VERSION_TLS1_2 and of
MBEDTLS_SSL_VERSION_TLS1_3 matches MBEDTLS_SSL_MINOR_VERSION_3 and
MBEDTLS_SSL_MINOR_VERSION_4, respectively.
Note: care has been taken to preserve serialized session format,
which uses only the lower byte of the TLS version.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
`curves.pl` (invoked by `all.sh test_depends_curves`, and
`all.sh test_depends_curves_psa`) currently runs two series of tests:
* For each curve, test with only that curve enabled.
* For each curve, test with all curves but that one.
Originally this script was introduced to validate test dependencies, and for
that all-but-one gives better results because it handles test cases that
require multiple curves. Then we extended the script to also test with a
single curve, which matches many real-world setups and catches some product
bugs. Single-curve testing also validates test dependencies in a more
limited way.
Remove all-but-one curve testing, because it doesn't add much to the test
coverage. Mainly, this means that we now won't detect if a test case
declares two curve dependencies but actually also depends on a third. This
is an acceptable loss.
The trigger for removing all-but-one curve testing is that this will make
the job take only about half as long, and the length of the job was a bit of
a problem. Resolves#5729.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_test_CID_no_debug was added specifically to be a non-regression
test for https://github.com/Mbed-TLS/mbedtls/issues/3998. Running compat.sh
in the newly introduced config-ccm-psk-dtls1_2.h is also a non-regression
test for that bug. Therefore component_test_CID_no_debug is redundant for
its primary purpose.
Of course every configuration is different, but the additional coverage from
component_test_CID_no_debug is minimal, unlike config-ccm-psk-dtls1_2.h
which is a plausible real-world configuration.
In mbedtls-2.28, component_test_CID_no_debug was never added, and running
the unit tests in that configuration does not trigger the #3998 bug, only
compat.sh does. So, rather than backport component_test_CID_no_debug to
2.28.2, I am removing it from 3.2.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A concurrent branch changes the way the test cases run to no longer use
force_version=tls13, so the automatic version requirement detection will no
longer work after that branch is merged. Therefore, keep the manual
requirement (at least until automatic detection gets smarter).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When the client or server uses a specific protocol version, automatically
require that version to be enabled at compile time.
An explicit call is still needed in test cases that require a specific
protocol version (due to analyzing version-specific behavior, or checking
the version in logs), but do not force that specific protocol version, or that
force a specific version only on the openssl/gnutls side.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename maybe_requires_ciphersuite_enabled() to detect_required_features()
and refactor its code a little. No intended behavior change. In subsequent
commits, this function will detect other requirements in a similar way.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It no longer makes sense, either in -e or -f: those ciphersuites have
been removed anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- comments about (3)DES were inconsistent (one saying "keep 3DES" and
the other "exclude it")
- we don't have any DES or 3DES ciphersuite anyway, so no need to
exclude them or comment about it
- while at it, fix comment about ARIA: it's in the default config now
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The ciphers were originally separated by the version conditions, and the spacing
was retained in case it was required later. It has been decided it would be better
to have an unbroken list in alphabetically order to quickly locate ciphers when
necessary
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Remove ciphersuites that are no longer supported.
running ./test/compat.sh -e '^$' -p mbedtls no longer skips any tests
Fixes#4818
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
As anything below (D)TLS 1.2 is no longer supported, checks for the
minor version will always be true, and have therefore been removed
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
