From fb404105476d82b7550d6ec69c385dc50410b74a Mon Sep 17 00:00:00 2001 From: Irit Arkin Date: Thu, 27 Aug 2015 15:56:44 +0100 Subject: [PATCH] Small edit --- yotta/data/example-hashing/README.md | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/yotta/data/example-hashing/README.md b/yotta/data/example-hashing/README.md index ad253cb76..553c3a618 100644 --- a/yotta/data/example-hashing/README.md +++ b/yotta/data/example-hashing/README.md @@ -4,14 +4,14 @@ This application performs hashing of a buffer with SHA-256 using various APIs. I ## Pre-requisites -To build and run this example the following requirements are necessary: +To build and run this example you must have: * A computer with the following software installed: * [CMake](http://www.cmake.org/download/). * [yotta](https://github.com/ARMmbed/yotta). Please note that **yotta has its own set of dependencies**, listed in the [installation instructions](http://armmbed.github.io/yotta/#installing-on-windows). * [Python](https://www.python.org/downloads/). - * [ARM GCC toolchain](https://launchpad.net/gcc-arm-embedded). - * A serial terminal emulator (e.g. screen, pySerial, cu). + * [The ARM GCC toolchain](https://launchpad.net/gcc-arm-embedded). + * A serial terminal emulator (Like screen, pySerial and cu). * An [FRDM-K64F](http://developer.mbed.org/platforms/FRDM-K64F/) development board, or another board supported by mbed OS (in which case you'll have to substitute frdm-k64f-gcc with the appropriate target in the instructions below). * A micro-USB cable. * If your OS is Windows, please follow the installation instructions [for the serial port driver](https://developer.mbed.org/handbook/Windows-serial-configuration). @@ -36,9 +36,15 @@ To build and run this example the following requirements are necessary: 5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-hashing.bin` to your mbed board and wait until the LED next to the USB port stops blinking. -6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200. +6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. -7. Press the reset button on the board. + Use the following settings: + + * 115200 baud (not 9600). + * 8N1. + * No flow control. + +7. Press the Reset button on the board. 8. The output in the terminal window should look like: