mbedtls/library/ssl_tls.c

8002 lines
250 KiB
C
Raw Normal View History

/*
* TLS shared functions
*
* Copyright The Mbed TLS Contributors
2015-09-04 14:21:07 +02:00
* SPDX-License-Identifier: Apache-2.0
2010-07-18 22:36:00 +02:00
*
2015-09-04 14:21:07 +02:00
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
2009-01-04 17:27:10 +01:00
*
2015-09-04 14:21:07 +02:00
* http://www.apache.org/licenses/LICENSE-2.0
*
2015-09-04 14:21:07 +02:00
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* http://www.ietf.org/rfc/rfc2246.txt
* http://www.ietf.org/rfc/rfc4346.txt
*/
#include "common.h"
#if defined(MBEDTLS_SSL_TLS_C)
#include <assert.h>
#if defined(MBEDTLS_PLATFORM_C)
#include "mbedtls/platform.h"
#else
#include <stdlib.h>
#include <stdio.h>
#define mbedtls_calloc calloc
#define mbedtls_free free
#define mbedtls_printf printf
#endif /* !MBEDTLS_PLATFORM_C */
2015-03-09 18:05:11 +01:00
#include "mbedtls/ssl.h"
#include "ssl_client.h"
#include "ssl_debug_helpers.h"
#include "ssl_misc.h"
#include "mbedtls/debug.h"
#include "mbedtls/error.h"
#include "mbedtls/platform_util.h"
#include "mbedtls/version.h"
#include "mbedtls/constant_time.h"
#include <string.h>
#if defined(MBEDTLS_USE_PSA_CRYPTO)
#include "mbedtls/psa_util.h"
#include "psa/crypto.h"
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
2015-03-09 18:05:11 +01:00
#include "mbedtls/oid.h"
#endif
#if defined(MBEDTLS_SSL_PROTO_DTLS)
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
2019-04-09 16:22:03 +02:00
/* Top-level Connection ID API */
int mbedtls_ssl_conf_cid( mbedtls_ssl_config *conf,
size_t len,
int ignore_other_cid )
Add CID configuration API Context: The CID draft does not require that the length of CIDs used for incoming records must not change in the course of a connection. Since the record header does not contain a length field for the CID, this means that if CIDs of varying lengths are used, the CID length must be inferred from other aspects of the record header (such as the epoch) and/or by means outside of the protocol, e.g. by coding its length in the CID itself. Inferring the CID length from the record's epoch is theoretically possible in DTLS 1.2, but it requires the information about the epoch to be present even if the epoch is no longer used: That's because one should silently drop records from old epochs, but not the entire datagrams to which they belong (there might be entire flights in a single datagram, including a change of epoch); however, in order to do so, one needs to parse the record's content length, the position of which is only known once the CID length for the epoch is known. In conclusion, it puts a significant burden on the implementation to infer the CID length from the record epoch, which moreover mangles record processing with the high-level logic of the protocol (determining which epochs are in use in which flights, when they are changed, etc. -- this would normally determine when we drop epochs). Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs, but every epoch may use a set of CIDs of varying lengths -- in that case, it's even theoretically impossible to do record header parsing based on the epoch configuration only. We must therefore seek a way for standalone record header parsing, which means that we must either (a) fix the CID lengths for incoming records, or (b) allow the application-code to configure a callback to implement an application-specific CID parsing which would somehow infer the length of the CID from the CID itself. Supporting multiple lengths for incoming CIDs significantly increases complexity while, on the other hand, the restriction to a fixed CID length for incoming CIDs (which the application controls - in contrast to the lengths of the CIDs used when writing messages to the peer) doesn't appear to severely limit the usefulness of the CID extension. Therefore, the initial implementation of the CID feature will require a fixed length for incoming CIDs, which is what this commit enforces, in the following way: In order to avoid a change of API in case support for variable lengths CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len() which applies to an SSL configuration, and which fixes the CID length that any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound to the given SSL configuration must use. While this creates a slight redundancy of parameters, it allows to potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which could allow users to register a callback which dynamically infers the length of a CID at record header parsing time, without changing the rest of the API.
2019-05-03 14:06:44 +02:00
{
if( len > MBEDTLS_SSL_CID_IN_LEN_MAX )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( ignore_other_cid != MBEDTLS_SSL_UNEXPECTED_CID_FAIL &&
ignore_other_cid != MBEDTLS_SSL_UNEXPECTED_CID_IGNORE )
{
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
conf->ignore_unexpected_cid = ignore_other_cid;
Add CID configuration API Context: The CID draft does not require that the length of CIDs used for incoming records must not change in the course of a connection. Since the record header does not contain a length field for the CID, this means that if CIDs of varying lengths are used, the CID length must be inferred from other aspects of the record header (such as the epoch) and/or by means outside of the protocol, e.g. by coding its length in the CID itself. Inferring the CID length from the record's epoch is theoretically possible in DTLS 1.2, but it requires the information about the epoch to be present even if the epoch is no longer used: That's because one should silently drop records from old epochs, but not the entire datagrams to which they belong (there might be entire flights in a single datagram, including a change of epoch); however, in order to do so, one needs to parse the record's content length, the position of which is only known once the CID length for the epoch is known. In conclusion, it puts a significant burden on the implementation to infer the CID length from the record epoch, which moreover mangles record processing with the high-level logic of the protocol (determining which epochs are in use in which flights, when they are changed, etc. -- this would normally determine when we drop epochs). Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs, but every epoch may use a set of CIDs of varying lengths -- in that case, it's even theoretically impossible to do record header parsing based on the epoch configuration only. We must therefore seek a way for standalone record header parsing, which means that we must either (a) fix the CID lengths for incoming records, or (b) allow the application-code to configure a callback to implement an application-specific CID parsing which would somehow infer the length of the CID from the CID itself. Supporting multiple lengths for incoming CIDs significantly increases complexity while, on the other hand, the restriction to a fixed CID length for incoming CIDs (which the application controls - in contrast to the lengths of the CIDs used when writing messages to the peer) doesn't appear to severely limit the usefulness of the CID extension. Therefore, the initial implementation of the CID feature will require a fixed length for incoming CIDs, which is what this commit enforces, in the following way: In order to avoid a change of API in case support for variable lengths CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len() which applies to an SSL configuration, and which fixes the CID length that any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound to the given SSL configuration must use. While this creates a slight redundancy of parameters, it allows to potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which could allow users to register a callback which dynamically infers the length of a CID at record header parsing time, without changing the rest of the API.
2019-05-03 14:06:44 +02:00
conf->cid_len = len;
return( 0 );
}
2019-04-09 16:22:03 +02:00
int mbedtls_ssl_set_cid( mbedtls_ssl_context *ssl,
int enable,
unsigned char const *own_cid,
size_t own_cid_len )
{
if( ssl->conf->transport != MBEDTLS_SSL_TRANSPORT_DATAGRAM )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
ssl->negotiate_cid = enable;
if( enable == MBEDTLS_SSL_CID_DISABLED )
{
MBEDTLS_SSL_DEBUG_MSG( 3, ( "Disable use of CID extension." ) );
return( 0 );
}
MBEDTLS_SSL_DEBUG_MSG( 3, ( "Enable use of CID extension." ) );
Add CID configuration API Context: The CID draft does not require that the length of CIDs used for incoming records must not change in the course of a connection. Since the record header does not contain a length field for the CID, this means that if CIDs of varying lengths are used, the CID length must be inferred from other aspects of the record header (such as the epoch) and/or by means outside of the protocol, e.g. by coding its length in the CID itself. Inferring the CID length from the record's epoch is theoretically possible in DTLS 1.2, but it requires the information about the epoch to be present even if the epoch is no longer used: That's because one should silently drop records from old epochs, but not the entire datagrams to which they belong (there might be entire flights in a single datagram, including a change of epoch); however, in order to do so, one needs to parse the record's content length, the position of which is only known once the CID length for the epoch is known. In conclusion, it puts a significant burden on the implementation to infer the CID length from the record epoch, which moreover mangles record processing with the high-level logic of the protocol (determining which epochs are in use in which flights, when they are changed, etc. -- this would normally determine when we drop epochs). Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs, but every epoch may use a set of CIDs of varying lengths -- in that case, it's even theoretically impossible to do record header parsing based on the epoch configuration only. We must therefore seek a way for standalone record header parsing, which means that we must either (a) fix the CID lengths for incoming records, or (b) allow the application-code to configure a callback to implement an application-specific CID parsing which would somehow infer the length of the CID from the CID itself. Supporting multiple lengths for incoming CIDs significantly increases complexity while, on the other hand, the restriction to a fixed CID length for incoming CIDs (which the application controls - in contrast to the lengths of the CIDs used when writing messages to the peer) doesn't appear to severely limit the usefulness of the CID extension. Therefore, the initial implementation of the CID feature will require a fixed length for incoming CIDs, which is what this commit enforces, in the following way: In order to avoid a change of API in case support for variable lengths CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len() which applies to an SSL configuration, and which fixes the CID length that any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound to the given SSL configuration must use. While this creates a slight redundancy of parameters, it allows to potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which could allow users to register a callback which dynamically infers the length of a CID at record header parsing time, without changing the rest of the API.
2019-05-03 14:06:44 +02:00
MBEDTLS_SSL_DEBUG_BUF( 3, "Own CID", own_cid, own_cid_len );
Add CID configuration API Context: The CID draft does not require that the length of CIDs used for incoming records must not change in the course of a connection. Since the record header does not contain a length field for the CID, this means that if CIDs of varying lengths are used, the CID length must be inferred from other aspects of the record header (such as the epoch) and/or by means outside of the protocol, e.g. by coding its length in the CID itself. Inferring the CID length from the record's epoch is theoretically possible in DTLS 1.2, but it requires the information about the epoch to be present even if the epoch is no longer used: That's because one should silently drop records from old epochs, but not the entire datagrams to which they belong (there might be entire flights in a single datagram, including a change of epoch); however, in order to do so, one needs to parse the record's content length, the position of which is only known once the CID length for the epoch is known. In conclusion, it puts a significant burden on the implementation to infer the CID length from the record epoch, which moreover mangles record processing with the high-level logic of the protocol (determining which epochs are in use in which flights, when they are changed, etc. -- this would normally determine when we drop epochs). Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs, but every epoch may use a set of CIDs of varying lengths -- in that case, it's even theoretically impossible to do record header parsing based on the epoch configuration only. We must therefore seek a way for standalone record header parsing, which means that we must either (a) fix the CID lengths for incoming records, or (b) allow the application-code to configure a callback to implement an application-specific CID parsing which would somehow infer the length of the CID from the CID itself. Supporting multiple lengths for incoming CIDs significantly increases complexity while, on the other hand, the restriction to a fixed CID length for incoming CIDs (which the application controls - in contrast to the lengths of the CIDs used when writing messages to the peer) doesn't appear to severely limit the usefulness of the CID extension. Therefore, the initial implementation of the CID feature will require a fixed length for incoming CIDs, which is what this commit enforces, in the following way: In order to avoid a change of API in case support for variable lengths CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len() which applies to an SSL configuration, and which fixes the CID length that any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound to the given SSL configuration must use. While this creates a slight redundancy of parameters, it allows to potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which could allow users to register a callback which dynamically infers the length of a CID at record header parsing time, without changing the rest of the API.
2019-05-03 14:06:44 +02:00
if( own_cid_len != ssl->conf->cid_len )
{
Add CID configuration API Context: The CID draft does not require that the length of CIDs used for incoming records must not change in the course of a connection. Since the record header does not contain a length field for the CID, this means that if CIDs of varying lengths are used, the CID length must be inferred from other aspects of the record header (such as the epoch) and/or by means outside of the protocol, e.g. by coding its length in the CID itself. Inferring the CID length from the record's epoch is theoretically possible in DTLS 1.2, but it requires the information about the epoch to be present even if the epoch is no longer used: That's because one should silently drop records from old epochs, but not the entire datagrams to which they belong (there might be entire flights in a single datagram, including a change of epoch); however, in order to do so, one needs to parse the record's content length, the position of which is only known once the CID length for the epoch is known. In conclusion, it puts a significant burden on the implementation to infer the CID length from the record epoch, which moreover mangles record processing with the high-level logic of the protocol (determining which epochs are in use in which flights, when they are changed, etc. -- this would normally determine when we drop epochs). Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs, but every epoch may use a set of CIDs of varying lengths -- in that case, it's even theoretically impossible to do record header parsing based on the epoch configuration only. We must therefore seek a way for standalone record header parsing, which means that we must either (a) fix the CID lengths for incoming records, or (b) allow the application-code to configure a callback to implement an application-specific CID parsing which would somehow infer the length of the CID from the CID itself. Supporting multiple lengths for incoming CIDs significantly increases complexity while, on the other hand, the restriction to a fixed CID length for incoming CIDs (which the application controls - in contrast to the lengths of the CIDs used when writing messages to the peer) doesn't appear to severely limit the usefulness of the CID extension. Therefore, the initial implementation of the CID feature will require a fixed length for incoming CIDs, which is what this commit enforces, in the following way: In order to avoid a change of API in case support for variable lengths CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len() which applies to an SSL configuration, and which fixes the CID length that any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound to the given SSL configuration must use. While this creates a slight redundancy of parameters, it allows to potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which could allow users to register a callback which dynamically infers the length of a CID at record header parsing time, without changing the rest of the API.
2019-05-03 14:06:44 +02:00
MBEDTLS_SSL_DEBUG_MSG( 3, ( "CID length %u does not match CID length %u in config",
(unsigned) own_cid_len,
(unsigned) ssl->conf->cid_len ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
memcpy( ssl->own_cid, own_cid, own_cid_len );
/* Truncation is not an issue here because
* MBEDTLS_SSL_CID_IN_LEN_MAX at most 255. */
ssl->own_cid_len = (uint8_t) own_cid_len;
2019-04-09 16:22:03 +02:00
return( 0 );
}
int mbedtls_ssl_get_own_cid( mbedtls_ssl_context *ssl,
int *enabled,
unsigned char own_cid[MBEDTLS_SSL_CID_OUT_LEN_MAX],
size_t *own_cid_len )
{
*enabled = MBEDTLS_SSL_CID_DISABLED;
if( ssl->conf->transport != MBEDTLS_SSL_TRANSPORT_DATAGRAM )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
/* We report MBEDTLS_SSL_CID_DISABLED in case the CID length is
* zero as this is indistinguishable from not requesting to use
* the CID extension. */
if( ssl->own_cid_len == 0 || ssl->negotiate_cid == MBEDTLS_SSL_CID_DISABLED )
return( 0 );
if( own_cid_len != NULL )
{
*own_cid_len = ssl->own_cid_len;
if( own_cid != NULL )
memcpy( own_cid, ssl->own_cid, ssl->own_cid_len );
}
*enabled = MBEDTLS_SSL_CID_ENABLED;
return( 0 );
}
2019-04-09 16:22:03 +02:00
int mbedtls_ssl_get_peer_cid( mbedtls_ssl_context *ssl,
int *enabled,
unsigned char peer_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ],
size_t *peer_cid_len )
{
*enabled = MBEDTLS_SSL_CID_DISABLED;
2019-04-26 18:08:02 +02:00
if( ssl->conf->transport != MBEDTLS_SSL_TRANSPORT_DATAGRAM ||
mbedtls_ssl_is_handshake_over( ssl ) == 0 )
{
2019-04-26 18:08:02 +02:00
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
2019-04-26 18:08:02 +02:00
/* We report MBEDTLS_SSL_CID_DISABLED in case the CID extensions
* were used, but client and server requested the empty CID.
* This is indistinguishable from not using the CID extension
* in the first place. */
2019-04-26 18:08:02 +02:00
if( ssl->transform_in->in_cid_len == 0 &&
ssl->transform_in->out_cid_len == 0 )
{
return( 0 );
}
if( peer_cid_len != NULL )
{
*peer_cid_len = ssl->transform_in->out_cid_len;
if( peer_cid != NULL )
{
memcpy( peer_cid, ssl->transform_in->out_cid,
ssl->transform_in->out_cid_len );
}
}
2019-04-26 18:08:02 +02:00
*enabled = MBEDTLS_SSL_CID_ENABLED;
2019-04-09 16:22:03 +02:00
return( 0 );
}
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
2019-04-09 16:22:03 +02:00
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
/*
* Convert max_fragment_length codes to length.
* RFC 6066 says:
* enum{
* 2^9(1), 2^10(2), 2^11(3), 2^12(4), (255)
* } MaxFragmentLength;
* and we add 0 -> extension unused
*/
static unsigned int ssl_mfl_code_to_length( int mfl )
{
switch( mfl )
{
case MBEDTLS_SSL_MAX_FRAG_LEN_NONE:
return ( MBEDTLS_TLS_EXT_ADV_CONTENT_LEN );
case MBEDTLS_SSL_MAX_FRAG_LEN_512:
return 512;
case MBEDTLS_SSL_MAX_FRAG_LEN_1024:
return 1024;
case MBEDTLS_SSL_MAX_FRAG_LEN_2048:
return 2048;
case MBEDTLS_SSL_MAX_FRAG_LEN_4096:
return 4096;
default:
return ( MBEDTLS_TLS_EXT_ADV_CONTENT_LEN );
}
}
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
int mbedtls_ssl_session_copy( mbedtls_ssl_session *dst,
const mbedtls_ssl_session *src )
2013-08-02 15:34:52 +02:00
{
mbedtls_ssl_session_free( dst );
memcpy( dst, src, sizeof( mbedtls_ssl_session ) );
2013-08-02 15:34:52 +02:00
#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C)
dst->ticket = NULL;
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
2013-08-02 15:34:52 +02:00
if( src->peer_cert != NULL )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
dst->peer_cert = mbedtls_calloc( 1, sizeof(mbedtls_x509_crt) );
if( dst->peer_cert == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
2013-08-02 15:34:52 +02:00
mbedtls_x509_crt_init( dst->peer_cert );
2013-08-02 15:34:52 +02:00
if( ( ret = mbedtls_x509_crt_parse_der( dst->peer_cert, src->peer_cert->raw.p,
src->peer_cert->raw.len ) ) != 0 )
2013-08-02 15:34:52 +02:00
{
mbedtls_free( dst->peer_cert );
2013-08-02 15:34:52 +02:00
dst->peer_cert = NULL;
return( ret );
}
}
#else /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
if( src->peer_cert_digest != NULL )
{
dst->peer_cert_digest =
mbedtls_calloc( 1, src->peer_cert_digest_len );
if( dst->peer_cert_digest == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
memcpy( dst->peer_cert_digest, src->peer_cert_digest,
src->peer_cert_digest_len );
dst->peer_cert_digest_type = src->peer_cert_digest_type;
dst->peer_cert_digest_len = src->peer_cert_digest_len;
}
#endif /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
2013-08-02 15:34:52 +02:00
#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C)
2013-08-02 15:34:52 +02:00
if( src->ticket != NULL )
{
dst->ticket = mbedtls_calloc( 1, src->ticket_len );
if( dst->ticket == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
2013-08-02 15:34:52 +02:00
memcpy( dst->ticket, src->ticket, src->ticket_len );
}
#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */
2013-08-02 15:34:52 +02:00
return( 0 );
}
#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
static int resize_buffer( unsigned char **buffer, size_t len_new, size_t *len_old )
{
unsigned char* resized_buffer = mbedtls_calloc( 1, len_new );
if( resized_buffer == NULL )
return -1;
/* We want to copy len_new bytes when downsizing the buffer, and
* len_old bytes when upsizing, so we choose the smaller of two sizes,
* to fit one buffer into another. Size checks, ensuring that no data is
* lost, are done outside of this function. */
memcpy( resized_buffer, *buffer,
( len_new < *len_old ) ? len_new : *len_old );
mbedtls_platform_zeroize( *buffer, *len_old );
mbedtls_free( *buffer );
*buffer = resized_buffer;
*len_old = len_new;
return 0;
}
static void handle_buffer_resizing( mbedtls_ssl_context *ssl, int downsizing,
size_t in_buf_new_len,
size_t out_buf_new_len )
{
int modified = 0;
size_t written_in = 0, iv_offset_in = 0, len_offset_in = 0;
size_t written_out = 0, iv_offset_out = 0, len_offset_out = 0;
if( ssl->in_buf != NULL )
{
written_in = ssl->in_msg - ssl->in_buf;
iv_offset_in = ssl->in_iv - ssl->in_buf;
len_offset_in = ssl->in_len - ssl->in_buf;
if( downsizing ?
ssl->in_buf_len > in_buf_new_len && ssl->in_left < in_buf_new_len :
ssl->in_buf_len < in_buf_new_len )
{
if( resize_buffer( &ssl->in_buf, in_buf_new_len, &ssl->in_buf_len ) != 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "input buffer resizing failed - out of memory" ) );
}
else
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "Reallocating in_buf to %" MBEDTLS_PRINTF_SIZET,
in_buf_new_len ) );
modified = 1;
}
}
}
if( ssl->out_buf != NULL )
{
written_out = ssl->out_msg - ssl->out_buf;
iv_offset_out = ssl->out_iv - ssl->out_buf;
len_offset_out = ssl->out_len - ssl->out_buf;
if( downsizing ?
ssl->out_buf_len > out_buf_new_len && ssl->out_left < out_buf_new_len :
ssl->out_buf_len < out_buf_new_len )
{
if( resize_buffer( &ssl->out_buf, out_buf_new_len, &ssl->out_buf_len ) != 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "output buffer resizing failed - out of memory" ) );
}
else
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "Reallocating out_buf to %" MBEDTLS_PRINTF_SIZET,
out_buf_new_len ) );
modified = 1;
}
}
}
if( modified )
{
/* Update pointers here to avoid doing it twice. */
mbedtls_ssl_reset_in_out_pointers( ssl );
/* Fields below might not be properly updated with record
* splitting or with CID, so they are manually updated here. */
ssl->out_msg = ssl->out_buf + written_out;
ssl->out_len = ssl->out_buf + len_offset_out;
ssl->out_iv = ssl->out_buf + iv_offset_out;
ssl->in_msg = ssl->in_buf + written_in;
ssl->in_len = ssl->in_buf + len_offset_in;
ssl->in_iv = ssl->in_buf + iv_offset_in;
}
}
#endif /* MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH */
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
#if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION)
typedef int (*tls_prf_fn)( const unsigned char *secret, size_t slen,
const char *label,
const unsigned char *random, size_t rlen,
unsigned char *dstbuf, size_t dlen );
static tls_prf_fn ssl_tls12prf_from_cs( int ciphersuite_id );
#endif /* MBEDTLS_SSL_CONTEXT_SERIALIZATION */
/* Type for the TLS PRF */
typedef int ssl_tls_prf_t(const unsigned char *, size_t, const char *,
const unsigned char *, size_t,
unsigned char *, size_t);
static int ssl_tls12_populate_transform( mbedtls_ssl_transform *transform,
int ciphersuite,
const unsigned char master[48],
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM)
int encrypt_then_mac,
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM */
ssl_tls_prf_t tls_prf,
const unsigned char randbytes[64],
mbedtls_ssl_protocol_version tls_version,
unsigned endpoint,
const mbedtls_ssl_context *ssl );
#if defined(MBEDTLS_SHA256_C)
static int tls_prf_sha256( const unsigned char *secret, size_t slen,
const char *label,
const unsigned char *random, size_t rlen,
unsigned char *dstbuf, size_t dlen );
static void ssl_calc_verify_tls_sha256( const mbedtls_ssl_context *,unsigned char*, size_t * );
static void ssl_calc_finished_tls_sha256( mbedtls_ssl_context *,unsigned char *, int );
#endif /* MBEDTLS_SHA256_C */
#if defined(MBEDTLS_SHA384_C)
static int tls_prf_sha384( const unsigned char *secret, size_t slen,
const char *label,
const unsigned char *random, size_t rlen,
unsigned char *dstbuf, size_t dlen );
static void ssl_calc_verify_tls_sha384( const mbedtls_ssl_context *, unsigned char*, size_t * );
static void ssl_calc_finished_tls_sha384( mbedtls_ssl_context *, unsigned char *, int );
#endif /* MBEDTLS_SHA384_C */
static size_t ssl_session_save_tls12( const mbedtls_ssl_session *session,
unsigned char *buf,
size_t buf_len );
static int ssl_session_load_tls12( mbedtls_ssl_session *session,
const unsigned char *buf,
size_t len );
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
static void ssl_update_checksum_start( mbedtls_ssl_context *, const unsigned char *, size_t );
#if defined(MBEDTLS_SHA256_C)
static void ssl_update_checksum_sha256( mbedtls_ssl_context *, const unsigned char *, size_t );
#endif /* MBEDTLS_SHA256_C */
#if defined(MBEDTLS_SHA384_C)
static void ssl_update_checksum_sha384( mbedtls_ssl_context *, const unsigned char *, size_t );
#endif /* MBEDTLS_SHA384_C */
2012-04-11 14:09:53 +02:00
int mbedtls_ssl_tls_prf( const mbedtls_tls_prf_types prf,
const unsigned char *secret, size_t slen,
const char *label,
const unsigned char *random, size_t rlen,
unsigned char *dstbuf, size_t dlen )
{
mbedtls_ssl_tls_prf_cb *tls_prf = NULL;
switch( prf )
{
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
#if defined(MBEDTLS_SHA384_C)
case MBEDTLS_SSL_TLS_PRF_SHA384:
tls_prf = tls_prf_sha384;
break;
#endif /* MBEDTLS_SHA384_C */
#if defined(MBEDTLS_SHA256_C)
case MBEDTLS_SSL_TLS_PRF_SHA256:
tls_prf = tls_prf_sha256;
break;
#endif /* MBEDTLS_SHA256_C */
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
default:
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
}
return( tls_prf( secret, slen, label, random, rlen, dstbuf, dlen ) );
}
#if defined(MBEDTLS_X509_CRT_PARSE_C)
static void ssl_clear_peer_cert( mbedtls_ssl_session *session )
{
#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
if( session->peer_cert != NULL )
{
mbedtls_x509_crt_free( session->peer_cert );
mbedtls_free( session->peer_cert );
session->peer_cert = NULL;
}
#else /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
if( session->peer_cert_digest != NULL )
{
/* Zeroization is not necessary. */
mbedtls_free( session->peer_cert_digest );
session->peer_cert_digest = NULL;
session->peer_cert_digest_type = MBEDTLS_MD_NONE;
session->peer_cert_digest_len = 0;
}
#endif /* !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
}
#endif /* MBEDTLS_X509_CRT_PARSE_C */
void mbedtls_ssl_optimize_checksum( mbedtls_ssl_context *ssl,
const mbedtls_ssl_ciphersuite_t *ciphersuite_info )
{
((void) ciphersuite_info);
#if defined(MBEDTLS_SHA384_C)
if( ciphersuite_info->mac == MBEDTLS_MD_SHA384 )
ssl->handshake->update_checksum = ssl_update_checksum_sha384;
else
#endif
#if defined(MBEDTLS_SHA256_C)
if( ciphersuite_info->mac != MBEDTLS_MD_SHA384 )
ssl->handshake->update_checksum = ssl_update_checksum_sha256;
else
#endif
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
return;
}
}
static void mbedtls_ssl_add_hs_hdr_to_checksum( mbedtls_ssl_context *ssl,
unsigned hs_type,
size_t total_hs_len )
{
unsigned char hs_hdr[4];
/* Build HS header for checksum update. */
hs_hdr[0] = MBEDTLS_BYTE_0( hs_type );
hs_hdr[1] = MBEDTLS_BYTE_2( total_hs_len );
hs_hdr[2] = MBEDTLS_BYTE_1( total_hs_len );
hs_hdr[3] = MBEDTLS_BYTE_0( total_hs_len );
ssl->handshake->update_checksum( ssl, hs_hdr, sizeof( hs_hdr ) );
}
void mbedtls_ssl_add_hs_msg_to_checksum( mbedtls_ssl_context *ssl,
unsigned hs_type,
unsigned char const *msg,
size_t msg_len )
{
mbedtls_ssl_add_hs_hdr_to_checksum( ssl, hs_type, msg_len );
ssl->handshake->update_checksum( ssl, msg, msg_len );
}
void mbedtls_ssl_reset_checksum( mbedtls_ssl_context *ssl )
{
((void) ssl);
#if defined(MBEDTLS_SHA256_C)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_hash_abort( &ssl->handshake->fin_sha256_psa );
psa_hash_setup( &ssl->handshake->fin_sha256_psa, PSA_ALG_SHA_256 );
#else
mbedtls_sha256_starts( &ssl->handshake->fin_sha256, 0 );
#endif
#endif
#if defined(MBEDTLS_SHA384_C)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_hash_abort( &ssl->handshake->fin_sha384_psa );
psa_hash_setup( &ssl->handshake->fin_sha384_psa, PSA_ALG_SHA_384 );
#else
mbedtls_sha512_starts( &ssl->handshake->fin_sha512, 1 );
#endif
#endif
}
static void ssl_update_checksum_start( mbedtls_ssl_context *ssl,
const unsigned char *buf, size_t len )
{
#if defined(MBEDTLS_SHA256_C)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_hash_update( &ssl->handshake->fin_sha256_psa, buf, len );
#else
mbedtls_sha256_update( &ssl->handshake->fin_sha256, buf, len );
#endif
#endif
#if defined(MBEDTLS_SHA384_C)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_hash_update( &ssl->handshake->fin_sha384_psa, buf, len );
#else
mbedtls_sha512_update( &ssl->handshake->fin_sha512, buf, len );
#endif
#endif
}
#if defined(MBEDTLS_SHA256_C)
static void ssl_update_checksum_sha256( mbedtls_ssl_context *ssl,
const unsigned char *buf, size_t len )
{
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_hash_update( &ssl->handshake->fin_sha256_psa, buf, len );
#else
mbedtls_sha256_update( &ssl->handshake->fin_sha256, buf, len );
#endif
}
#endif
#if defined(MBEDTLS_SHA384_C)
static void ssl_update_checksum_sha384( mbedtls_ssl_context *ssl,
const unsigned char *buf, size_t len )
{
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_hash_update( &ssl->handshake->fin_sha384_psa, buf, len );
#else
mbedtls_sha512_update( &ssl->handshake->fin_sha512, buf, len );
#endif
}
#endif
static void ssl_handshake_params_init( mbedtls_ssl_handshake_params *handshake )
{
memset( handshake, 0, sizeof( mbedtls_ssl_handshake_params ) );
#if defined(MBEDTLS_SHA256_C)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
handshake->fin_sha256_psa = psa_hash_operation_init();
psa_hash_setup( &handshake->fin_sha256_psa, PSA_ALG_SHA_256 );
#else
mbedtls_sha256_init( &handshake->fin_sha256 );
mbedtls_sha256_starts( &handshake->fin_sha256, 0 );
#endif
#endif
#if defined(MBEDTLS_SHA384_C)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
handshake->fin_sha384_psa = psa_hash_operation_init();
psa_hash_setup( &handshake->fin_sha384_psa, PSA_ALG_SHA_384 );
#else
mbedtls_sha512_init( &handshake->fin_sha512 );
mbedtls_sha512_starts( &handshake->fin_sha512, 1 );
#endif
#endif
handshake->update_checksum = ssl_update_checksum_start;
#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \
defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
mbedtls_ssl_sig_hash_set_init( &handshake->hash_algs );
#endif
Provide standalone version of `ssl_decrypt_buf` Analogous to the previous commit, but concerning the record decryption routine `ssl_decrypt_buf`. An important change regards the checking of CBC padding: Prior to this commit, the CBC padding check always read 256 bytes at the end of the internal record buffer, almost always going past the boundaries of the record under consideration. In order to stay within the bounds of the given record, this commit changes this behavior by always reading the last min(256, plaintext_len) bytes of the record plaintext buffer and taking into consideration the last `padlen` of these for the padding check. With this change, the memory access pattern and runtime of the padding check is entirely determined by the size of the encrypted record, in particular not giving away any information on the validity of the padding. The following depicts the different behaviors: 1) Previous CBC padding check 1.a) Claimed padding length <= plaintext length +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +------------------------------------... | read for padding check ... +------------------------------------... | contents discarded from here 1.b) Claimed padding length > plaintext length +----------------------------------------+----+ | Record plaintext buffer | PL | +----------------------------------------+----+ +-------------------------... | read for padding check ... +-------------------------... | contents discarded from here 2) New CBC padding check +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +---------------------------------------+ | read for padding check | +---------------------------------------+ | contents discarded until here
2017-12-27 22:28:58 +01:00
#if defined(MBEDTLS_DHM_C)
mbedtls_dhm_init( &handshake->dhm_ctx );
#endif
#if !defined(MBEDTLS_USE_PSA_CRYPTO) && defined(MBEDTLS_ECDH_C)
mbedtls_ecdh_init( &handshake->ecdh_ctx );
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
mbedtls_ecjpake_init( &handshake->ecjpake_ctx );
#if defined(MBEDTLS_SSL_CLI_C)
handshake->ecjpake_cache = NULL;
handshake->ecjpake_cache_len = 0;
#endif
#endif
#if defined(MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED)
mbedtls_x509_crt_restart_init( &handshake->ecrs_ctx );
#endif
Provide standalone version of `ssl_decrypt_buf` Analogous to the previous commit, but concerning the record decryption routine `ssl_decrypt_buf`. An important change regards the checking of CBC padding: Prior to this commit, the CBC padding check always read 256 bytes at the end of the internal record buffer, almost always going past the boundaries of the record under consideration. In order to stay within the bounds of the given record, this commit changes this behavior by always reading the last min(256, plaintext_len) bytes of the record plaintext buffer and taking into consideration the last `padlen` of these for the padding check. With this change, the memory access pattern and runtime of the padding check is entirely determined by the size of the encrypted record, in particular not giving away any information on the validity of the padding. The following depicts the different behaviors: 1) Previous CBC padding check 1.a) Claimed padding length <= plaintext length +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +------------------------------------... | read for padding check ... +------------------------------------... | contents discarded from here 1.b) Claimed padding length > plaintext length +----------------------------------------+----+ | Record plaintext buffer | PL | +----------------------------------------+----+ +-------------------------... | read for padding check ... +-------------------------... | contents discarded from here 2) New CBC padding check +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +---------------------------------------+ | read for padding check | +---------------------------------------+ | contents discarded until here
2017-12-27 22:28:58 +01:00
#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
handshake->sni_authmode = MBEDTLS_SSL_VERIFY_UNSET;
#endif
Provide standalone version of `ssl_decrypt_buf` Analogous to the previous commit, but concerning the record decryption routine `ssl_decrypt_buf`. An important change regards the checking of CBC padding: Prior to this commit, the CBC padding check always read 256 bytes at the end of the internal record buffer, almost always going past the boundaries of the record under consideration. In order to stay within the bounds of the given record, this commit changes this behavior by always reading the last min(256, plaintext_len) bytes of the record plaintext buffer and taking into consideration the last `padlen` of these for the padding check. With this change, the memory access pattern and runtime of the padding check is entirely determined by the size of the encrypted record, in particular not giving away any information on the validity of the padding. The following depicts the different behaviors: 1) Previous CBC padding check 1.a) Claimed padding length <= plaintext length +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +------------------------------------... | read for padding check ... +------------------------------------... | contents discarded from here 1.b) Claimed padding length > plaintext length +----------------------------------------+----+ | Record plaintext buffer | PL | +----------------------------------------+----+ +-------------------------... | read for padding check ... +-------------------------... | contents discarded from here 2) New CBC padding check +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +---------------------------------------+ | read for padding check | +---------------------------------------+ | contents discarded until here
2017-12-27 22:28:58 +01:00
#if defined(MBEDTLS_X509_CRT_PARSE_C) && \
!defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
mbedtls_pk_init( &handshake->peer_pubkey );
#endif
}
2014-10-29 12:07:57 +01:00
void mbedtls_ssl_transform_init( mbedtls_ssl_transform *transform )
{
memset( transform, 0, sizeof(mbedtls_ssl_transform) );
#if defined(MBEDTLS_USE_PSA_CRYPTO)
transform->psa_key_enc = MBEDTLS_SVC_KEY_ID_INIT;
transform->psa_key_dec = MBEDTLS_SVC_KEY_ID_INIT;
#else
mbedtls_cipher_init( &transform->cipher_ctx_enc );
mbedtls_cipher_init( &transform->cipher_ctx_dec );
#endif
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
transform->psa_mac_enc = MBEDTLS_SVC_KEY_ID_INIT;
transform->psa_mac_dec = MBEDTLS_SVC_KEY_ID_INIT;
#else
mbedtls_md_init( &transform->md_ctx_enc );
mbedtls_md_init( &transform->md_ctx_dec );
#endif
#endif
}
Provide standalone version of `ssl_decrypt_buf` Analogous to the previous commit, but concerning the record decryption routine `ssl_decrypt_buf`. An important change regards the checking of CBC padding: Prior to this commit, the CBC padding check always read 256 bytes at the end of the internal record buffer, almost always going past the boundaries of the record under consideration. In order to stay within the bounds of the given record, this commit changes this behavior by always reading the last min(256, plaintext_len) bytes of the record plaintext buffer and taking into consideration the last `padlen` of these for the padding check. With this change, the memory access pattern and runtime of the padding check is entirely determined by the size of the encrypted record, in particular not giving away any information on the validity of the padding. The following depicts the different behaviors: 1) Previous CBC padding check 1.a) Claimed padding length <= plaintext length +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +------------------------------------... | read for padding check ... +------------------------------------... | contents discarded from here 1.b) Claimed padding length > plaintext length +----------------------------------------+----+ | Record plaintext buffer | PL | +----------------------------------------+----+ +-------------------------... | read for padding check ... +-------------------------... | contents discarded from here 2) New CBC padding check +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +---------------------------------------+ | read for padding check | +---------------------------------------+ | contents discarded until here
2017-12-27 22:28:58 +01:00
void mbedtls_ssl_session_init( mbedtls_ssl_session *session )
{
memset( session, 0, sizeof(mbedtls_ssl_session) );
}
static int ssl_handshake_init( mbedtls_ssl_context *ssl )
{
/* Clear old handshake information if present */
if( ssl->transform_negotiate )
mbedtls_ssl_transform_free( ssl->transform_negotiate );
if( ssl->session_negotiate )
mbedtls_ssl_session_free( ssl->session_negotiate );
if( ssl->handshake )
mbedtls_ssl_handshake_free( ssl );
/*
* Either the pointers are now NULL or cleared properly and can be freed.
* Now allocate missing structures.
*/
if( ssl->transform_negotiate == NULL )
{
ssl->transform_negotiate = mbedtls_calloc( 1, sizeof(mbedtls_ssl_transform) );
}
if( ssl->session_negotiate == NULL )
{
ssl->session_negotiate = mbedtls_calloc( 1, sizeof(mbedtls_ssl_session) );
}
if( ssl->handshake == NULL )
{
ssl->handshake = mbedtls_calloc( 1, sizeof(mbedtls_ssl_handshake_params) );
}
#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
/* If the buffers are too small - reallocate */
handle_buffer_resizing( ssl, 0, MBEDTLS_SSL_IN_BUFFER_LEN,
MBEDTLS_SSL_OUT_BUFFER_LEN );
#endif
/* All pointers should exist and can be directly freed without issue */
if( ssl->handshake == NULL ||
ssl->transform_negotiate == NULL ||
ssl->session_negotiate == NULL )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "alloc() of ssl sub-contexts failed" ) );
mbedtls_free( ssl->handshake );
mbedtls_free( ssl->transform_negotiate );
mbedtls_free( ssl->session_negotiate );
ssl->handshake = NULL;
ssl->transform_negotiate = NULL;
ssl->session_negotiate = NULL;
2014-10-28 13:08:59 +01:00
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
}
/* Initialize structures */
mbedtls_ssl_session_init( ssl->session_negotiate );
mbedtls_ssl_transform_init( ssl->transform_negotiate );
ssl_handshake_params_init( ssl->handshake );
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
{
ssl->handshake->alt_transform_out = ssl->transform_out;
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT )
ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_PREPARING;
else
ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_WAITING;
mbedtls_ssl_set_timer( ssl, 0 );
}
#endif
/*
* curve_list is translated to IANA TLS group identifiers here because
* mbedtls_ssl_conf_curves returns void and so can't return
* any error codes.
*/
#if defined(MBEDTLS_ECP_C)
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
/* Heap allocate and translate curve_list from internal to IANA group ids */
if ( ssl->conf->curve_list != NULL )
{
size_t length;
const mbedtls_ecp_group_id *curve_list = ssl->conf->curve_list;
for( length = 0; ( curve_list[length] != MBEDTLS_ECP_DP_NONE ) &&
( length < MBEDTLS_ECP_DP_MAX ); length++ ) {}
/* Leave room for zero termination */
uint16_t *group_list = mbedtls_calloc( length + 1, sizeof(uint16_t) );
if ( group_list == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
for( size_t i = 0; i < length; i++ )
{
const mbedtls_ecp_curve_info *info =
mbedtls_ecp_curve_info_from_grp_id( curve_list[i] );
if ( info == NULL )
{
mbedtls_free( group_list );
return( MBEDTLS_ERR_SSL_BAD_CONFIG );
}
group_list[i] = info->tls_id;
}
group_list[length] = 0;
ssl->handshake->group_list = group_list;
ssl->handshake->group_list_heap_allocated = 1;
}
else
{
ssl->handshake->group_list = ssl->conf->group_list;
ssl->handshake->group_list_heap_allocated = 0;
}
#endif /* MBEDTLS_DEPRECATED_REMOVED */
#endif /* MBEDTLS_ECP_C */
#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
/* Heap allocate and translate sig_hashes from internal hash identifiers to
signature algorithms IANA identifiers. */
if ( mbedtls_ssl_conf_is_tls12_only( ssl->conf ) &&
ssl->conf->sig_hashes != NULL )
{
const int *md;
const int *sig_hashes = ssl->conf->sig_hashes;
size_t sig_algs_len = 0;
uint16_t *p;
#if defined(static_assert)
static_assert( MBEDTLS_SSL_MAX_SIG_ALG_LIST_LEN
<= ( SIZE_MAX - ( 2 * sizeof(uint16_t) ) ),
"MBEDTLS_SSL_MAX_SIG_ALG_LIST_LEN too big" );
#endif
for( md = sig_hashes; *md != MBEDTLS_MD_NONE; md++ )
{
if( mbedtls_ssl_hash_from_md_alg( *md ) == MBEDTLS_SSL_HASH_NONE )
continue;
#if defined(MBEDTLS_ECDSA_C)
sig_algs_len += sizeof( uint16_t );
#endif
#if defined(MBEDTLS_RSA_C)
sig_algs_len += sizeof( uint16_t );
#endif
if( sig_algs_len > MBEDTLS_SSL_MAX_SIG_ALG_LIST_LEN )
return( MBEDTLS_ERR_SSL_BAD_CONFIG );
}
if( sig_algs_len < MBEDTLS_SSL_MIN_SIG_ALG_LIST_LEN )
return( MBEDTLS_ERR_SSL_BAD_CONFIG );
ssl->handshake->sig_algs = mbedtls_calloc( 1, sig_algs_len +
sizeof( uint16_t ));
if( ssl->handshake->sig_algs == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
p = (uint16_t *)ssl->handshake->sig_algs;
for( md = sig_hashes; *md != MBEDTLS_MD_NONE; md++ )
{
unsigned char hash = mbedtls_ssl_hash_from_md_alg( *md );
if( hash == MBEDTLS_SSL_HASH_NONE )
continue;
#if defined(MBEDTLS_ECDSA_C)
*p = (( hash << 8 ) | MBEDTLS_SSL_SIG_ECDSA);
p++;
#endif
#if defined(MBEDTLS_RSA_C)
*p = (( hash << 8 ) | MBEDTLS_SSL_SIG_RSA);
p++;
#endif
}
*p = MBEDTLS_TLS1_3_SIG_NONE;
ssl->handshake->sig_algs_heap_allocated = 1;
}
else
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
{
ssl->handshake->sig_algs = ssl->conf->sig_algs;
ssl->handshake->sig_algs_heap_allocated = 0;
}
#endif /* MBEDTLS_DEPRECATED_REMOVED */
#endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
return( 0 );
}
#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C)
/* Dummy cookie callbacks for defaults */
static int ssl_cookie_write_dummy( void *ctx,
unsigned char **p, unsigned char *end,
const unsigned char *cli_id, size_t cli_id_len )
{
((void) ctx);
((void) p);
((void) end);
((void) cli_id);
((void) cli_id_len);
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
}
static int ssl_cookie_check_dummy( void *ctx,
const unsigned char *cookie, size_t cookie_len,
const unsigned char *cli_id, size_t cli_id_len )
{
((void) ctx);
((void) cookie);
((void) cookie_len);
((void) cli_id);
((void) cli_id_len);
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
}
#endif /* MBEDTLS_SSL_DTLS_HELLO_VERIFY && MBEDTLS_SSL_SRV_C */
/*
* Initialize an SSL context
*/
void mbedtls_ssl_init( mbedtls_ssl_context *ssl )
{
memset( ssl, 0, sizeof( mbedtls_ssl_context ) );
}
static int ssl_conf_version_check( const mbedtls_ssl_context *ssl )
{
const mbedtls_ssl_config *conf = ssl->conf;
#if defined(MBEDTLS_SSL_PROTO_TLS1_3)
if( mbedtls_ssl_conf_is_tls13_only( conf ) )
2014-09-17 11:34:57 +02:00
{
if( conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "DTLS 1.3 is not yet supported." ) );
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
}
MBEDTLS_SSL_DEBUG_MSG( 4, ( "The SSL configuration is tls13 only." ) );
return( 0 );
2014-09-17 11:34:57 +02:00
}
#endif
2014-09-17 11:34:57 +02:00
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
if( mbedtls_ssl_conf_is_tls12_only( conf ) )
{
MBEDTLS_SSL_DEBUG_MSG( 4, ( "The SSL configuration is tls12 only." ) );
return( 0 );
}
#endif
#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && defined(MBEDTLS_SSL_PROTO_TLS1_3)
if( mbedtls_ssl_conf_is_hybrid_tls12_tls13( conf ) )
{
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "DTLS not yet supported in Hybrid TLS 1.3 + TLS 1.2" ) );
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
}
if( conf->endpoint == MBEDTLS_SSL_IS_SERVER )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "TLS 1.3 server is not supported yet." ) );
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
}
MBEDTLS_SSL_DEBUG_MSG( 4, ( "The SSL configuration is TLS 1.3 or TLS 1.2." ) );
return( 0 );
}
#endif
2014-03-24 13:13:01 +01:00
MBEDTLS_SSL_DEBUG_MSG( 1, ( "The SSL configuration is invalid." ) );
return( MBEDTLS_ERR_SSL_BAD_CONFIG );
}
2014-03-24 13:13:01 +01:00
static int ssl_conf_check(const mbedtls_ssl_context *ssl)
{
int ret;
ret = ssl_conf_version_check( ssl );
if( ret != 0 )
return( ret );
/* Space for further checks */
return( 0 );
}
/*
* Setup an SSL context
*/
2014-09-19 21:18:23 +02:00
int mbedtls_ssl_setup( mbedtls_ssl_context *ssl,
const mbedtls_ssl_config *conf )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN;
size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN;
ssl->conf = conf;
if( ( ret = ssl_conf_check( ssl ) ) != 0 )
return( ret );
2014-10-15 13:52:48 +02:00
/*
* Prepare base structures
*/
2014-09-19 21:18:23 +02:00
/* Set to NULL in case of an error condition */
ssl->out_buf = NULL;
#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
ssl->in_buf_len = in_buf_len;
#endif
ssl->in_buf = mbedtls_calloc( 1, in_buf_len );
if( ssl->in_buf == NULL )
2014-03-24 13:13:01 +01:00
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "alloc(%" MBEDTLS_PRINTF_SIZET " bytes) failed", in_buf_len ) );
ret = MBEDTLS_ERR_SSL_ALLOC_FAILED;
goto error;
}
#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
ssl->out_buf_len = out_buf_len;
#endif
ssl->out_buf = mbedtls_calloc( 1, out_buf_len );
if( ssl->out_buf == NULL )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "alloc(%" MBEDTLS_PRINTF_SIZET " bytes) failed", out_buf_len ) );
ret = MBEDTLS_ERR_SSL_ALLOC_FAILED;
goto error;
}
2014-03-24 13:13:01 +01:00
mbedtls_ssl_reset_in_out_pointers( ssl );
2014-03-24 13:13:01 +01:00
#if defined(MBEDTLS_SSL_DTLS_SRTP)
memset( &ssl->dtls_srtp_info, 0, sizeof(ssl->dtls_srtp_info) );
#endif
2014-03-24 13:13:01 +01:00
if( ( ret = ssl_handshake_init( ssl ) ) != 0 )
goto error;
2014-03-24 13:13:01 +01:00
return( 0 );
error:
mbedtls_free( ssl->in_buf );
mbedtls_free( ssl->out_buf );
ssl->conf = NULL;
#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
ssl->in_buf_len = 0;
ssl->out_buf_len = 0;
#endif
ssl->in_buf = NULL;
ssl->out_buf = NULL;
2014-09-17 11:34:57 +02:00
ssl->in_hdr = NULL;
ssl->in_ctr = NULL;
ssl->in_len = NULL;
ssl->in_iv = NULL;
ssl->in_msg = NULL;
ssl->out_hdr = NULL;
ssl->out_ctr = NULL;
ssl->out_len = NULL;
ssl->out_iv = NULL;
ssl->out_msg = NULL;
return( ret );
}
/*
* Reset an initialized and used SSL context for re-use while retaining
* all application-set variables, function pointers and data.
*
* If partial is non-zero, keep data in the input buffer and client ID.
* (Use when a DTLS client reconnects from the same port.)
*/
void mbedtls_ssl_session_reset_msg_layer( mbedtls_ssl_context *ssl,
int partial )
{
#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
size_t in_buf_len = ssl->in_buf_len;
size_t out_buf_len = ssl->out_buf_len;
#else
size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN;
size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN;
#endif
#if !defined(MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE) || !defined(MBEDTLS_SSL_SRV_C)
partial = 0;
#endif
/* Cancel any possibly running timer */
mbedtls_ssl_set_timer( ssl, 0 );
mbedtls_ssl_reset_in_out_pointers( ssl );
/* Reset incoming message parsing */
ssl->in_offt = NULL;
ssl->nb_zero = 0;
ssl->in_msgtype = 0;
ssl->in_msglen = 0;
ssl->in_hslen = 0;
ssl->keep_current_message = 0;
ssl->transform_in = NULL;
#if defined(MBEDTLS_SSL_PROTO_DTLS)
ssl->next_record_offset = 0;
ssl->in_epoch = 0;
#endif
/* Keep current datagram if partial == 1 */
if( partial == 0 )
{
ssl->in_left = 0;
memset( ssl->in_buf, 0, in_buf_len );
}
/* Reset outgoing message writing */
ssl->out_msgtype = 0;
ssl->out_msglen = 0;
ssl->out_left = 0;
memset( ssl->out_buf, 0, out_buf_len );
memset( ssl->cur_out_ctr, 0, sizeof( ssl->cur_out_ctr ) );
ssl->transform_out = NULL;
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
mbedtls_ssl_dtls_replay_reset( ssl );
#endif
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
if( ssl->transform )
{
mbedtls_ssl_transform_free( ssl->transform );
mbedtls_free( ssl->transform );
ssl->transform = NULL;
}
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
#if defined(MBEDTLS_SSL_PROTO_TLS1_3)
mbedtls_ssl_transform_free( ssl->transform_application );
mbedtls_free( ssl->transform_application );
ssl->transform_application = NULL;
if( ssl->handshake != NULL )
{
mbedtls_ssl_transform_free( ssl->handshake->transform_earlydata );
mbedtls_free( ssl->handshake->transform_earlydata );
ssl->handshake->transform_earlydata = NULL;
mbedtls_ssl_transform_free( ssl->handshake->transform_handshake );
mbedtls_free( ssl->handshake->transform_handshake );
ssl->handshake->transform_handshake = NULL;
}
#endif /* MBEDTLS_SSL_PROTO_TLS1_3 */
}
int mbedtls_ssl_session_reset_int( mbedtls_ssl_context *ssl, int partial )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
ssl->state = MBEDTLS_SSL_HELLO_REQUEST;
mbedtls_ssl_session_reset_msg_layer( ssl, partial );
/* Reset renegotiation state */
#if defined(MBEDTLS_SSL_RENEGOTIATION)
ssl->renego_status = MBEDTLS_SSL_INITIAL_HANDSHAKE;
ssl->renego_records_seen = 0;
ssl->verify_data_len = 0;
memset( ssl->own_verify_data, 0, MBEDTLS_SSL_VERIFY_DATA_MAX_LEN );
memset( ssl->peer_verify_data, 0, MBEDTLS_SSL_VERIFY_DATA_MAX_LEN );
#endif
ssl->secure_renegotiation = MBEDTLS_SSL_LEGACY_RENEGOTIATION;
ssl->session_in = NULL;
ssl->session_out = NULL;
if( ssl->session )
{
mbedtls_ssl_session_free( ssl->session );
mbedtls_free( ssl->session );
ssl->session = NULL;
}
#if defined(MBEDTLS_SSL_ALPN)
ssl->alpn_chosen = NULL;
#endif
#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C)
#if defined(MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE)
if( partial == 0 )
#endif
{
mbedtls_free( ssl->cli_id );
ssl->cli_id = NULL;
ssl->cli_id_len = 0;
}
#endif
if( ( ret = ssl_handshake_init( ssl ) ) != 0 )
return( ret );
return( 0 );
}
/*
* Reset an initialized and used SSL context for re-use while retaining
* all application-set variables, function pointers and data.
*/
int mbedtls_ssl_session_reset( mbedtls_ssl_context *ssl )
{
return( mbedtls_ssl_session_reset_int( ssl, 0 ) );
}
/*
* SSL set accessors
*/
void mbedtls_ssl_conf_endpoint( mbedtls_ssl_config *conf, int endpoint )
{
conf->endpoint = endpoint;
}
void mbedtls_ssl_conf_transport( mbedtls_ssl_config *conf, int transport )
{
conf->transport = transport;
}
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
void mbedtls_ssl_conf_dtls_anti_replay( mbedtls_ssl_config *conf, char mode )
{
conf->anti_replay = mode;
}
#endif
void mbedtls_ssl_conf_dtls_badmac_limit( mbedtls_ssl_config *conf, unsigned limit )
{
conf->badmac_limit = limit;
}
#if defined(MBEDTLS_SSL_PROTO_DTLS)
void mbedtls_ssl_set_datagram_packing( mbedtls_ssl_context *ssl,
unsigned allow_packing )
{
ssl->disable_datagram_packing = !allow_packing;
}
void mbedtls_ssl_conf_handshake_timeout( mbedtls_ssl_config *conf,
uint32_t min, uint32_t max )
{
conf->hs_timeout_min = min;
conf->hs_timeout_max = max;
}
#endif
void mbedtls_ssl_conf_authmode( mbedtls_ssl_config *conf, int authmode )
{
conf->authmode = authmode;
}
#if defined(MBEDTLS_X509_CRT_PARSE_C)
void mbedtls_ssl_conf_verify( mbedtls_ssl_config *conf,
int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
void *p_vrfy )
{
conf->f_vrfy = f_vrfy;
conf->p_vrfy = p_vrfy;
}
#endif /* MBEDTLS_X509_CRT_PARSE_C */
void mbedtls_ssl_conf_rng( mbedtls_ssl_config *conf,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng )
{
conf->f_rng = f_rng;
conf->p_rng = p_rng;
}
void mbedtls_ssl_conf_dbg( mbedtls_ssl_config *conf,
void (*f_dbg)(void *, int, const char *, int, const char *),
void *p_dbg )
{
conf->f_dbg = f_dbg;
conf->p_dbg = p_dbg;
}
void mbedtls_ssl_set_bio( mbedtls_ssl_context *ssl,
void *p_bio,
mbedtls_ssl_send_t *f_send,
mbedtls_ssl_recv_t *f_recv,
mbedtls_ssl_recv_timeout_t *f_recv_timeout )
{
ssl->p_bio = p_bio;
ssl->f_send = f_send;
ssl->f_recv = f_recv;
ssl->f_recv_timeout = f_recv_timeout;
}
#if defined(MBEDTLS_SSL_PROTO_DTLS)
void mbedtls_ssl_set_mtu( mbedtls_ssl_context *ssl, uint16_t mtu )
{
ssl->mtu = mtu;
}
#endif
void mbedtls_ssl_conf_read_timeout( mbedtls_ssl_config *conf, uint32_t timeout )
{
conf->read_timeout = timeout;
}
void mbedtls_ssl_set_timer_cb( mbedtls_ssl_context *ssl,
void *p_timer,
mbedtls_ssl_set_timer_t *f_set_timer,
mbedtls_ssl_get_timer_t *f_get_timer )
{
ssl->p_timer = p_timer;
ssl->f_set_timer = f_set_timer;
ssl->f_get_timer = f_get_timer;
/* Make sure we start with no timer running */
mbedtls_ssl_set_timer( ssl, 0 );
}
2014-08-20 10:43:01 +02:00
#if defined(MBEDTLS_SSL_SRV_C)
void mbedtls_ssl_conf_session_cache( mbedtls_ssl_config *conf,
void *p_cache,
mbedtls_ssl_cache_get_t *f_get_cache,
mbedtls_ssl_cache_set_t *f_set_cache )
{
conf->p_cache = p_cache;
conf->f_get_cache = f_get_cache;
conf->f_set_cache = f_set_cache;
}
#endif /* MBEDTLS_SSL_SRV_C */
#if defined(MBEDTLS_SSL_CLI_C)
int mbedtls_ssl_set_session( mbedtls_ssl_context *ssl, const mbedtls_ssl_session *session )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
2014-02-18 11:33:49 +01:00
if( ssl == NULL ||
session == NULL ||
ssl->session_negotiate == NULL ||
ssl->conf->endpoint != MBEDTLS_SSL_IS_CLIENT )
2014-02-18 11:33:49 +01:00
{
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
if( ssl->handshake->resume == 1 )
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
2014-09-19 21:18:23 +02:00
if( ( ret = mbedtls_ssl_session_copy( ssl->session_negotiate,
session ) ) != 0 )
return( ret );
ssl->handshake->resume = 1;
2014-09-19 21:18:23 +02:00
return( 0 );
}
#endif /* MBEDTLS_SSL_CLI_C */
2014-08-20 10:43:01 +02:00
void mbedtls_ssl_conf_ciphersuites( mbedtls_ssl_config *conf,
const int *ciphersuites )
{
conf->ciphersuite_list = ciphersuites;
}
#if defined(MBEDTLS_SSL_PROTO_TLS1_3)
void mbedtls_ssl_conf_tls13_key_exchange_modes( mbedtls_ssl_config *conf,
const int kex_modes )
{
conf->tls13_kex_modes = kex_modes & MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_ALL;
}
#endif /* MBEDTLS_SSL_PROTO_TLS1_3 */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
void mbedtls_ssl_conf_cert_profile( mbedtls_ssl_config *conf,
const mbedtls_x509_crt_profile *profile )
{
conf->cert_profile = profile;
}
static void ssl_key_cert_free( mbedtls_ssl_key_cert *key_cert )
{
mbedtls_ssl_key_cert *cur = key_cert, *next;
while( cur != NULL )
{
next = cur->next;
mbedtls_free( cur );
cur = next;
}
}
/* Append a new keycert entry to a (possibly empty) list */
static int ssl_append_key_cert( mbedtls_ssl_key_cert **head,
mbedtls_x509_crt *cert,
mbedtls_pk_context *key )
{
mbedtls_ssl_key_cert *new_cert;
if( cert == NULL )
{
/* Free list if cert is null */
ssl_key_cert_free( *head );
*head = NULL;
return( 0 );
}
new_cert = mbedtls_calloc( 1, sizeof( mbedtls_ssl_key_cert ) );
if( new_cert == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
new_cert->cert = cert;
new_cert->key = key;
new_cert->next = NULL;
/* Update head if the list was null, else add to the end */
if( *head == NULL )
{
*head = new_cert;
}
else
2014-09-03 12:54:04 +02:00
{
mbedtls_ssl_key_cert *cur = *head;
while( cur->next != NULL )
cur = cur->next;
cur->next = new_cert;
}
return( 0 );
}
int mbedtls_ssl_conf_own_cert( mbedtls_ssl_config *conf,
mbedtls_x509_crt *own_cert,
mbedtls_pk_context *pk_key )
{
return( ssl_append_key_cert( &conf->key_cert, own_cert, pk_key ) );
}
void mbedtls_ssl_conf_ca_chain( mbedtls_ssl_config *conf,
mbedtls_x509_crt *ca_chain,
mbedtls_x509_crl *ca_crl )
{
conf->ca_chain = ca_chain;
conf->ca_crl = ca_crl;
#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK)
/* mbedtls_ssl_conf_ca_chain() and mbedtls_ssl_conf_ca_cb()
* cannot be used together. */
conf->f_ca_cb = NULL;
conf->p_ca_cb = NULL;
#endif /* MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK */
}
#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK)
void mbedtls_ssl_conf_ca_cb( mbedtls_ssl_config *conf,
mbedtls_x509_crt_ca_cb_t f_ca_cb,
void *p_ca_cb )
{
conf->f_ca_cb = f_ca_cb;
conf->p_ca_cb = p_ca_cb;
2014-02-18 11:33:49 +01:00
/* mbedtls_ssl_conf_ca_chain() and mbedtls_ssl_conf_ca_cb()
* cannot be used together. */
conf->ca_chain = NULL;
conf->ca_crl = NULL;
}
#endif /* MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
2014-09-24 10:52:58 +02:00
#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
const unsigned char *mbedtls_ssl_get_hs_sni( mbedtls_ssl_context *ssl,
size_t *name_len )
{
*name_len = ssl->handshake->sni_name_len;
return( ssl->handshake->sni_name );
}
int mbedtls_ssl_set_hs_own_cert( mbedtls_ssl_context *ssl,
mbedtls_x509_crt *own_cert,
mbedtls_pk_context *pk_key )
{
return( ssl_append_key_cert( &ssl->handshake->sni_key_cert,
own_cert, pk_key ) );
}
void mbedtls_ssl_set_hs_ca_chain( mbedtls_ssl_context *ssl,
mbedtls_x509_crt *ca_chain,
mbedtls_x509_crl *ca_crl )
{
ssl->handshake->sni_ca_chain = ca_chain;
ssl->handshake->sni_ca_crl = ca_crl;
}
void mbedtls_ssl_set_hs_authmode( mbedtls_ssl_context *ssl,
int authmode )
{
ssl->handshake->sni_authmode = authmode;
}
#endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
void mbedtls_ssl_set_verify( mbedtls_ssl_context *ssl,
int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
void *p_vrfy )
{
ssl->f_vrfy = f_vrfy;
ssl->p_vrfy = p_vrfy;
}
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
/*
* Set EC J-PAKE password for current handshake
*/
int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl,
const unsigned char *pw,
size_t pw_len )
{
mbedtls_ecjpake_role role;
if( ssl->handshake == NULL || ssl->conf == NULL )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
role = MBEDTLS_ECJPAKE_SERVER;
else
role = MBEDTLS_ECJPAKE_CLIENT;
return( mbedtls_ecjpake_setup( &ssl->handshake->ecjpake_ctx,
role,
MBEDTLS_MD_SHA256,
MBEDTLS_ECP_DP_SECP256R1,
pw, pw_len ) );
}
#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
static int ssl_conf_psk_is_configured( mbedtls_ssl_config const *conf )
2014-09-24 10:52:58 +02:00
{
#if defined(MBEDTLS_USE_PSA_CRYPTO)
if( !mbedtls_svc_key_id_is_null( conf->psk_opaque ) )
return( 1 );
#endif /* MBEDTLS_USE_PSA_CRYPTO */
if( conf->psk != NULL )
return( 1 );
2014-09-24 10:52:58 +02:00
return( 0 );
}
2014-09-24 10:52:58 +02:00
static void ssl_conf_remove_psk( mbedtls_ssl_config *conf )
2014-09-24 10:52:58 +02:00
{
/* Remove reference to existing PSK, if any. */
#if defined(MBEDTLS_USE_PSA_CRYPTO)
if( ! mbedtls_svc_key_id_is_null( conf->psk_opaque ) )
{
/* The maintenance of the PSK key slot is the
* user's responsibility. */
conf->psk_opaque = MBEDTLS_SVC_KEY_ID_INIT;
}
/* This and the following branch should never
* be taken simultaenously as we maintain the
* invariant that raw and opaque PSKs are never
* configured simultaneously. As a safeguard,
* though, `else` is omitted here. */
#endif /* MBEDTLS_USE_PSA_CRYPTO */
if( conf->psk != NULL )
{
mbedtls_platform_zeroize( conf->psk, conf->psk_len );
mbedtls_free( conf->psk );
conf->psk = NULL;
conf->psk_len = 0;
}
/* Remove reference to PSK identity, if any. */
if( conf->psk_identity != NULL )
{
mbedtls_free( conf->psk_identity );
conf->psk_identity = NULL;
conf->psk_identity_len = 0;
}
}
/* This function assumes that PSK identity in the SSL config is unset.
* It checks that the provided identity is well-formed and attempts
* to make a copy of it in the SSL config.
* On failure, the PSK identity in the config remains unset. */
static int ssl_conf_set_psk_identity( mbedtls_ssl_config *conf,
unsigned char const *psk_identity,
size_t psk_identity_len )
{
/* Identity len will be encoded on two bytes */
if( psk_identity == NULL ||
( psk_identity_len >> 16 ) != 0 ||
psk_identity_len > MBEDTLS_SSL_OUT_CONTENT_LEN )
{
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
conf->psk_identity = mbedtls_calloc( 1, psk_identity_len );
if( conf->psk_identity == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
conf->psk_identity_len = psk_identity_len;
memcpy( conf->psk_identity, psk_identity, conf->psk_identity_len );
return( 0 );
}
int mbedtls_ssl_conf_psk( mbedtls_ssl_config *conf,
const unsigned char *psk, size_t psk_len,
const unsigned char *psk_identity, size_t psk_identity_len )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
/* We currently only support one PSK, raw or opaque. */
if( ssl_conf_psk_is_configured( conf ) )
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
/* Check and set raw PSK */
if( psk == NULL )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( psk_len == 0 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( psk_len > MBEDTLS_PSK_MAX_LEN )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( ( conf->psk = mbedtls_calloc( 1, psk_len ) ) == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
conf->psk_len = psk_len;
memcpy( conf->psk, psk, conf->psk_len );
/* Check and set PSK Identity */
ret = ssl_conf_set_psk_identity( conf, psk_identity, psk_identity_len );
if( ret != 0 )
ssl_conf_remove_psk( conf );
return( ret );
}
static void ssl_remove_psk( mbedtls_ssl_context *ssl )
{
#if defined(MBEDTLS_USE_PSA_CRYPTO)
if( ! mbedtls_svc_key_id_is_null( ssl->handshake->psk_opaque ) )
{
ssl->handshake->psk_opaque = MBEDTLS_SVC_KEY_ID_INIT;
}
else
#endif /* MBEDTLS_USE_PSA_CRYPTO */
if( ssl->handshake->psk != NULL )
{
mbedtls_platform_zeroize( ssl->handshake->psk,
ssl->handshake->psk_len );
mbedtls_free( ssl->handshake->psk );
ssl->handshake->psk_len = 0;
}
}
int mbedtls_ssl_set_hs_psk( mbedtls_ssl_context *ssl,
const unsigned char *psk, size_t psk_len )
{
if( psk == NULL || ssl->handshake == NULL )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( psk_len > MBEDTLS_PSK_MAX_LEN )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
ssl_remove_psk( ssl );
if( ( ssl->handshake->psk = mbedtls_calloc( 1, psk_len ) ) == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
ssl->handshake->psk_len = psk_len;
memcpy( ssl->handshake->psk, psk, ssl->handshake->psk_len );
return( 0 );
}
#if defined(MBEDTLS_USE_PSA_CRYPTO)
int mbedtls_ssl_conf_psk_opaque( mbedtls_ssl_config *conf,
mbedtls_svc_key_id_t psk,
const unsigned char *psk_identity,
size_t psk_identity_len )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
/* We currently only support one PSK, raw or opaque. */
if( ssl_conf_psk_is_configured( conf ) )
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
/* Check and set opaque PSK */
if( mbedtls_svc_key_id_is_null( psk ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
conf->psk_opaque = psk;
/* Check and set PSK Identity */
ret = ssl_conf_set_psk_identity( conf, psk_identity,
psk_identity_len );
if( ret != 0 )
ssl_conf_remove_psk( conf );
return( ret );
}
int mbedtls_ssl_set_hs_psk_opaque( mbedtls_ssl_context *ssl,
mbedtls_svc_key_id_t psk )
{
if( ( mbedtls_svc_key_id_is_null( psk ) ) ||
( ssl->handshake == NULL ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
ssl_remove_psk( ssl );
ssl->handshake->psk_opaque = psk;
return( 0 );
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
2014-08-11 19:27:24 +02:00
void mbedtls_ssl_conf_psk_cb( mbedtls_ssl_config *conf,
int (*f_psk)(void *, mbedtls_ssl_context *, const unsigned char *,
size_t),
void *p_psk )
{
conf->f_psk = f_psk;
conf->p_psk = p_psk;
}
#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
#if defined(MBEDTLS_USE_PSA_CRYPTO)
static mbedtls_ssl_mode_t mbedtls_ssl_get_base_mode(
psa_algorithm_t alg )
{
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC)
if( alg == PSA_ALG_CBC_NO_PADDING )
return( MBEDTLS_SSL_MODE_CBC );
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */
if( PSA_ALG_IS_AEAD( alg ) )
return( MBEDTLS_SSL_MODE_AEAD );
return( MBEDTLS_SSL_MODE_STREAM );
}
#else /* MBEDTLS_USE_PSA_CRYPTO */
static mbedtls_ssl_mode_t mbedtls_ssl_get_base_mode(
mbedtls_cipher_mode_t mode )
{
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC)
if( mode == MBEDTLS_MODE_CBC )
return( MBEDTLS_SSL_MODE_CBC );
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */
#if defined(MBEDTLS_GCM_C) || \
defined(MBEDTLS_CCM_C) || \
defined(MBEDTLS_CHACHAPOLY_C)
if( mode == MBEDTLS_MODE_GCM ||
mode == MBEDTLS_MODE_CCM ||
mode == MBEDTLS_MODE_CHACHAPOLY )
return( MBEDTLS_SSL_MODE_AEAD );
#endif /* MBEDTLS_GCM_C || MBEDTLS_CCM_C || MBEDTLS_CHACHAPOLY_C */
return( MBEDTLS_SSL_MODE_STREAM );
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
static mbedtls_ssl_mode_t mbedtls_ssl_get_actual_mode(
mbedtls_ssl_mode_t base_mode,
int encrypt_then_mac )
{
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM)
if( encrypt_then_mac == MBEDTLS_SSL_ETM_ENABLED &&
base_mode == MBEDTLS_SSL_MODE_CBC )
{
return( MBEDTLS_SSL_MODE_CBC_ETM );
}
#else
(void) encrypt_then_mac;
#endif
return( base_mode );
}
mbedtls_ssl_mode_t mbedtls_ssl_get_mode_from_transform(
const mbedtls_ssl_transform *transform )
{
mbedtls_ssl_mode_t base_mode = mbedtls_ssl_get_base_mode(
#if defined(MBEDTLS_USE_PSA_CRYPTO)
transform->psa_alg
#else
mbedtls_cipher_get_cipher_mode( &transform->cipher_ctx_enc )
#endif
);
int encrypt_then_mac = 0;
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM)
encrypt_then_mac = transform->encrypt_then_mac;
#endif
return( mbedtls_ssl_get_actual_mode( base_mode, encrypt_then_mac ) );
}
mbedtls_ssl_mode_t mbedtls_ssl_get_mode_from_ciphersuite(
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM)
int encrypt_then_mac,
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM */
const mbedtls_ssl_ciphersuite_t *suite )
{
mbedtls_ssl_mode_t base_mode = MBEDTLS_SSL_MODE_STREAM;
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_status_t status;
psa_algorithm_t alg;
psa_key_type_t type;
size_t size;
status = mbedtls_ssl_cipher_to_psa( suite->cipher, 0, &alg, &type, &size );
if( status == PSA_SUCCESS )
base_mode = mbedtls_ssl_get_base_mode( alg );
#else
const mbedtls_cipher_info_t *cipher =
mbedtls_cipher_info_from_type( suite->cipher );
if( cipher != NULL )
{
base_mode =
mbedtls_ssl_get_base_mode(
mbedtls_cipher_info_get_mode( cipher ) );
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#if !defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM)
int encrypt_then_mac = 0;
#endif
return( mbedtls_ssl_get_actual_mode( base_mode, encrypt_then_mac ) );
}
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_status_t mbedtls_ssl_cipher_to_psa( mbedtls_cipher_type_t mbedtls_cipher_type,
size_t taglen,
psa_algorithm_t *alg,
psa_key_type_t *key_type,
size_t *key_size )
{
switch ( mbedtls_cipher_type )
{
case MBEDTLS_CIPHER_AES_128_CBC:
*alg = PSA_ALG_CBC_NO_PADDING;
*key_type = PSA_KEY_TYPE_AES;
*key_size = 128;
break;
case MBEDTLS_CIPHER_AES_128_CCM:
*alg = taglen ? PSA_ALG_AEAD_WITH_SHORTENED_TAG( PSA_ALG_CCM, taglen ) : PSA_ALG_CCM;
*key_type = PSA_KEY_TYPE_AES;
*key_size = 128;
break;
case MBEDTLS_CIPHER_AES_128_GCM:
*alg = PSA_ALG_GCM;
*key_type = PSA_KEY_TYPE_AES;
*key_size = 128;
break;
case MBEDTLS_CIPHER_AES_192_CCM:
*alg = taglen ? PSA_ALG_AEAD_WITH_SHORTENED_TAG( PSA_ALG_CCM, taglen ) : PSA_ALG_CCM;
*key_type = PSA_KEY_TYPE_AES;
*key_size = 192;
break;
case MBEDTLS_CIPHER_AES_192_GCM:
*alg = PSA_ALG_GCM;
*key_type = PSA_KEY_TYPE_AES;
*key_size = 192;
break;
case MBEDTLS_CIPHER_AES_256_CBC:
*alg = PSA_ALG_CBC_NO_PADDING;
*key_type = PSA_KEY_TYPE_AES;
*key_size = 256;
break;
case MBEDTLS_CIPHER_AES_256_CCM:
*alg = taglen ? PSA_ALG_AEAD_WITH_SHORTENED_TAG( PSA_ALG_CCM, taglen ) : PSA_ALG_CCM;
*key_type = PSA_KEY_TYPE_AES;
*key_size = 256;
break;
case MBEDTLS_CIPHER_AES_256_GCM:
*alg = PSA_ALG_GCM;
*key_type = PSA_KEY_TYPE_AES;
*key_size = 256;
break;
case MBEDTLS_CIPHER_ARIA_128_CBC:
*alg = PSA_ALG_CBC_NO_PADDING;
*key_type = PSA_KEY_TYPE_ARIA;
*key_size = 128;
break;
case MBEDTLS_CIPHER_ARIA_128_CCM:
*alg = taglen ? PSA_ALG_AEAD_WITH_SHORTENED_TAG( PSA_ALG_CCM, taglen ) : PSA_ALG_CCM;
*key_type = PSA_KEY_TYPE_ARIA;
*key_size = 128;
break;
case MBEDTLS_CIPHER_ARIA_128_GCM:
*alg = PSA_ALG_GCM;
*key_type = PSA_KEY_TYPE_ARIA;
*key_size = 128;
break;
case MBEDTLS_CIPHER_ARIA_192_CCM:
*alg = taglen ? PSA_ALG_AEAD_WITH_SHORTENED_TAG( PSA_ALG_CCM, taglen ) : PSA_ALG_CCM;
*key_type = PSA_KEY_TYPE_ARIA;
*key_size = 192;
break;
case MBEDTLS_CIPHER_ARIA_192_GCM:
*alg = PSA_ALG_GCM;
*key_type = PSA_KEY_TYPE_ARIA;
*key_size = 192;
break;
case MBEDTLS_CIPHER_ARIA_256_CBC:
*alg = PSA_ALG_CBC_NO_PADDING;
*key_type = PSA_KEY_TYPE_ARIA;
*key_size = 256;
break;
case MBEDTLS_CIPHER_ARIA_256_CCM:
*alg = taglen ? PSA_ALG_AEAD_WITH_SHORTENED_TAG( PSA_ALG_CCM, taglen ) : PSA_ALG_CCM;
*key_type = PSA_KEY_TYPE_ARIA;
*key_size = 256;
break;
case MBEDTLS_CIPHER_ARIA_256_GCM:
*alg = PSA_ALG_GCM;
*key_type = PSA_KEY_TYPE_ARIA;
*key_size = 256;
break;
case MBEDTLS_CIPHER_CAMELLIA_128_CBC:
*alg = PSA_ALG_CBC_NO_PADDING;
*key_type = PSA_KEY_TYPE_CAMELLIA;
*key_size = 128;
break;
case MBEDTLS_CIPHER_CAMELLIA_128_CCM:
*alg = taglen ? PSA_ALG_AEAD_WITH_SHORTENED_TAG( PSA_ALG_CCM, taglen ) : PSA_ALG_CCM;
*key_type = PSA_KEY_TYPE_CAMELLIA;
*key_size = 128;
break;
case MBEDTLS_CIPHER_CAMELLIA_128_GCM:
*alg = PSA_ALG_GCM;
*key_type = PSA_KEY_TYPE_CAMELLIA;
*key_size = 128;
break;
case MBEDTLS_CIPHER_CAMELLIA_192_CCM:
*alg = taglen ? PSA_ALG_AEAD_WITH_SHORTENED_TAG( PSA_ALG_CCM, taglen ) : PSA_ALG_CCM;
*key_type = PSA_KEY_TYPE_CAMELLIA;
*key_size = 192;
break;
case MBEDTLS_CIPHER_CAMELLIA_192_GCM:
*alg = PSA_ALG_GCM;
*key_type = PSA_KEY_TYPE_CAMELLIA;
*key_size = 192;
break;
case MBEDTLS_CIPHER_CAMELLIA_256_CBC:
*alg = PSA_ALG_CBC_NO_PADDING;
*key_type = PSA_KEY_TYPE_CAMELLIA;
*key_size = 256;
break;
case MBEDTLS_CIPHER_CAMELLIA_256_CCM:
*alg = taglen ? PSA_ALG_AEAD_WITH_SHORTENED_TAG( PSA_ALG_CCM, taglen ) : PSA_ALG_CCM;
*key_type = PSA_KEY_TYPE_CAMELLIA;
*key_size = 256;
break;
case MBEDTLS_CIPHER_CAMELLIA_256_GCM:
*alg = PSA_ALG_GCM;
*key_type = PSA_KEY_TYPE_CAMELLIA;
*key_size = 256;
break;
case MBEDTLS_CIPHER_CHACHA20_POLY1305:
*alg = PSA_ALG_CHACHA20_POLY1305;
*key_type = PSA_KEY_TYPE_CHACHA20;
*key_size = 256;
break;
case MBEDTLS_CIPHER_NULL:
*alg = MBEDTLS_SSL_NULL_CIPHER;
*key_type = 0;
*key_size = 0;
break;
default:
return PSA_ERROR_NOT_SUPPORTED;
}
return PSA_SUCCESS;
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_SRV_C)
int mbedtls_ssl_conf_dh_param_bin( mbedtls_ssl_config *conf,
const unsigned char *dhm_P, size_t P_len,
const unsigned char *dhm_G, size_t G_len )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
mbedtls_mpi_free( &conf->dhm_P );
mbedtls_mpi_free( &conf->dhm_G );
if( ( ret = mbedtls_mpi_read_binary( &conf->dhm_P, dhm_P, P_len ) ) != 0 ||
( ret = mbedtls_mpi_read_binary( &conf->dhm_G, dhm_G, G_len ) ) != 0 )
{
mbedtls_mpi_free( &conf->dhm_P );
mbedtls_mpi_free( &conf->dhm_G );
return( ret );
}
return( 0 );
}
int mbedtls_ssl_conf_dh_param_ctx( mbedtls_ssl_config *conf, mbedtls_dhm_context *dhm_ctx )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
mbedtls_mpi_free( &conf->dhm_P );
mbedtls_mpi_free( &conf->dhm_G );
if( ( ret = mbedtls_dhm_get_value( dhm_ctx, MBEDTLS_DHM_PARAM_P,
&conf->dhm_P ) ) != 0 ||
( ret = mbedtls_dhm_get_value( dhm_ctx, MBEDTLS_DHM_PARAM_G,
&conf->dhm_G ) ) != 0 )
{
mbedtls_mpi_free( &conf->dhm_P );
mbedtls_mpi_free( &conf->dhm_G );
return( ret );
}
return( 0 );
}
#endif /* MBEDTLS_DHM_C && MBEDTLS_SSL_SRV_C */
#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_CLI_C)
/*
* Set the minimum length for Diffie-Hellman parameters
*/
void mbedtls_ssl_conf_dhm_min_bitlen( mbedtls_ssl_config *conf,
unsigned int bitlen )
{
conf->dhm_min_bitlen = bitlen;
}
#endif /* MBEDTLS_DHM_C && MBEDTLS_SSL_CLI_C */
#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
#if !defined(MBEDTLS_DEPRECATED_REMOVED) && defined(MBEDTLS_SSL_PROTO_TLS1_2)
/*
* Set allowed/preferred hashes for handshake signatures
*/
void mbedtls_ssl_conf_sig_hashes( mbedtls_ssl_config *conf,
const int *hashes )
{
conf->sig_hashes = hashes;
}
#endif /* !MBEDTLS_DEPRECATED_REMOVED && MBEDTLS_SSL_PROTO_TLS1_2 */
/* Configure allowed signature algorithms for handshake */
void mbedtls_ssl_conf_sig_algs( mbedtls_ssl_config *conf,
const uint16_t* sig_algs )
{
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
conf->sig_hashes = NULL;
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
conf->sig_algs = sig_algs;
}
#endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
#if defined(MBEDTLS_ECP_C)
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
/*
* Set the allowed elliptic curves
*
* mbedtls_ssl_setup() takes the provided list
* and translates it to a list of IANA TLS group identifiers,
* stored in ssl->handshake->group_list.
*
*/
void mbedtls_ssl_conf_curves( mbedtls_ssl_config *conf,
const mbedtls_ecp_group_id *curve_list )
{
conf->curve_list = curve_list;
conf->group_list = NULL;
}
#endif /* MBEDTLS_DEPRECATED_REMOVED */
#endif /* MBEDTLS_ECP_C */
/*
* Set the allowed groups
*/
void mbedtls_ssl_conf_groups( mbedtls_ssl_config *conf,
const uint16_t *group_list )
{
#if defined(MBEDTLS_ECP_C) && !defined(MBEDTLS_DEPRECATED_REMOVED)
conf->curve_list = NULL;
#endif
conf->group_list = group_list;
}
#if defined(MBEDTLS_X509_CRT_PARSE_C)
int mbedtls_ssl_set_hostname( mbedtls_ssl_context *ssl, const char *hostname )
{
/* Initialize to suppress unnecessary compiler warning */
size_t hostname_len = 0;
/* Check if new hostname is valid before
* making any change to current one */
if( hostname != NULL )
{
hostname_len = strlen( hostname );
if( hostname_len > MBEDTLS_SSL_MAX_HOST_NAME_LEN )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
/* Now it's clear that we will overwrite the old hostname,
* so we can free it safely */
if( ssl->hostname != NULL )
{
mbedtls_platform_zeroize( ssl->hostname, strlen( ssl->hostname ) );
mbedtls_free( ssl->hostname );
}
/* Passing NULL as hostname shall clear the old one */
if( hostname == NULL )
{
ssl->hostname = NULL;
}
else
{
ssl->hostname = mbedtls_calloc( 1, hostname_len + 1 );
if( ssl->hostname == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
memcpy( ssl->hostname, hostname, hostname_len );
ssl->hostname[hostname_len] = '\0';
}
return( 0 );
}
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
void mbedtls_ssl_conf_sni( mbedtls_ssl_config *conf,
int (*f_sni)(void *, mbedtls_ssl_context *,
const unsigned char *, size_t),
void *p_sni )
{
conf->f_sni = f_sni;
conf->p_sni = p_sni;
}
#endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */
#if defined(MBEDTLS_SSL_ALPN)
int mbedtls_ssl_conf_alpn_protocols( mbedtls_ssl_config *conf, const char **protos )
{
size_t cur_len, tot_len;
const char **p;
/*
* RFC 7301 3.1: "Empty strings MUST NOT be included and byte strings
* MUST NOT be truncated."
* We check lengths now rather than later.
*/
tot_len = 0;
for( p = protos; *p != NULL; p++ )
{
cur_len = strlen( *p );
tot_len += cur_len;
if( ( cur_len == 0 ) ||
( cur_len > MBEDTLS_SSL_MAX_ALPN_NAME_LEN ) ||
( tot_len > MBEDTLS_SSL_MAX_ALPN_LIST_LEN ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
conf->alpn_list = protos;
return( 0 );
}
const char *mbedtls_ssl_get_alpn_protocol( const mbedtls_ssl_context *ssl )
{
return( ssl->alpn_chosen );
}
#endif /* MBEDTLS_SSL_ALPN */
#if defined(MBEDTLS_SSL_DTLS_SRTP)
void mbedtls_ssl_conf_srtp_mki_value_supported( mbedtls_ssl_config *conf,
int support_mki_value )
{
conf->dtls_srtp_mki_support = support_mki_value;
}
Provide standalone version of `ssl_decrypt_buf` Analogous to the previous commit, but concerning the record decryption routine `ssl_decrypt_buf`. An important change regards the checking of CBC padding: Prior to this commit, the CBC padding check always read 256 bytes at the end of the internal record buffer, almost always going past the boundaries of the record under consideration. In order to stay within the bounds of the given record, this commit changes this behavior by always reading the last min(256, plaintext_len) bytes of the record plaintext buffer and taking into consideration the last `padlen` of these for the padding check. With this change, the memory access pattern and runtime of the padding check is entirely determined by the size of the encrypted record, in particular not giving away any information on the validity of the padding. The following depicts the different behaviors: 1) Previous CBC padding check 1.a) Claimed padding length <= plaintext length +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +------------------------------------... | read for padding check ... +------------------------------------... | contents discarded from here 1.b) Claimed padding length > plaintext length +----------------------------------------+----+ | Record plaintext buffer | PL | +----------------------------------------+----+ +-------------------------... | read for padding check ... +-------------------------... | contents discarded from here 2) New CBC padding check +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +---------------------------------------+ | read for padding check | +---------------------------------------+ | contents discarded until here
2017-12-27 22:28:58 +01:00
int mbedtls_ssl_dtls_srtp_set_mki_value( mbedtls_ssl_context *ssl,
unsigned char *mki_value,
uint16_t mki_len )
{
if( mki_len > MBEDTLS_TLS_SRTP_MAX_MKI_LENGTH )
{
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
if( ssl->conf->dtls_srtp_mki_support == MBEDTLS_SSL_DTLS_SRTP_MKI_UNSUPPORTED )
{
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
}
memcpy( ssl->dtls_srtp_info.mki_value, mki_value, mki_len );
ssl->dtls_srtp_info.mki_len = mki_len;
return( 0 );
}
int mbedtls_ssl_conf_dtls_srtp_protection_profiles( mbedtls_ssl_config *conf,
const mbedtls_ssl_srtp_profile *profiles )
{
const mbedtls_ssl_srtp_profile *p;
size_t list_size = 0;
Provide standalone version of `ssl_decrypt_buf` Analogous to the previous commit, but concerning the record decryption routine `ssl_decrypt_buf`. An important change regards the checking of CBC padding: Prior to this commit, the CBC padding check always read 256 bytes at the end of the internal record buffer, almost always going past the boundaries of the record under consideration. In order to stay within the bounds of the given record, this commit changes this behavior by always reading the last min(256, plaintext_len) bytes of the record plaintext buffer and taking into consideration the last `padlen` of these for the padding check. With this change, the memory access pattern and runtime of the padding check is entirely determined by the size of the encrypted record, in particular not giving away any information on the validity of the padding. The following depicts the different behaviors: 1) Previous CBC padding check 1.a) Claimed padding length <= plaintext length +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +------------------------------------... | read for padding check ... +------------------------------------... | contents discarded from here 1.b) Claimed padding length > plaintext length +----------------------------------------+----+ | Record plaintext buffer | PL | +----------------------------------------+----+ +-------------------------... | read for padding check ... +-------------------------... | contents discarded from here 2) New CBC padding check +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +---------------------------------------+ | read for padding check | +---------------------------------------+ | contents discarded until here
2017-12-27 22:28:58 +01:00
/* check the profiles list: all entry must be valid,
* its size cannot be more than the total number of supported profiles, currently 4 */
for( p = profiles; *p != MBEDTLS_TLS_SRTP_UNSET &&
list_size <= MBEDTLS_TLS_SRTP_MAX_PROFILE_LIST_LENGTH;
p++ )
{
if( mbedtls_ssl_check_srtp_profile_value( *p ) != MBEDTLS_TLS_SRTP_UNSET )
{
list_size++;
}
else
{
/* unsupported value, stop parsing and set the size to an error value */
list_size = MBEDTLS_TLS_SRTP_MAX_PROFILE_LIST_LENGTH + 1;
}
}
if( list_size > MBEDTLS_TLS_SRTP_MAX_PROFILE_LIST_LENGTH )
{
conf->dtls_srtp_profile_list = NULL;
conf->dtls_srtp_profile_list_len = 0;
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
conf->dtls_srtp_profile_list = profiles;
conf->dtls_srtp_profile_list_len = list_size;
return( 0 );
}
Provide standalone version of `ssl_decrypt_buf` Analogous to the previous commit, but concerning the record decryption routine `ssl_decrypt_buf`. An important change regards the checking of CBC padding: Prior to this commit, the CBC padding check always read 256 bytes at the end of the internal record buffer, almost always going past the boundaries of the record under consideration. In order to stay within the bounds of the given record, this commit changes this behavior by always reading the last min(256, plaintext_len) bytes of the record plaintext buffer and taking into consideration the last `padlen` of these for the padding check. With this change, the memory access pattern and runtime of the padding check is entirely determined by the size of the encrypted record, in particular not giving away any information on the validity of the padding. The following depicts the different behaviors: 1) Previous CBC padding check 1.a) Claimed padding length <= plaintext length +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +------------------------------------... | read for padding check ... +------------------------------------... | contents discarded from here 1.b) Claimed padding length > plaintext length +----------------------------------------+----+ | Record plaintext buffer | PL | +----------------------------------------+----+ +-------------------------... | read for padding check ... +-------------------------... | contents discarded from here 2) New CBC padding check +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +---------------------------------------+ | read for padding check | +---------------------------------------+ | contents discarded until here
2017-12-27 22:28:58 +01:00
void mbedtls_ssl_get_dtls_srtp_negotiation_result( const mbedtls_ssl_context *ssl,
mbedtls_dtls_srtp_info *dtls_srtp_info )
{
dtls_srtp_info->chosen_dtls_srtp_profile = ssl->dtls_srtp_info.chosen_dtls_srtp_profile;
/* do not copy the mki value if there is no chosen profile */
if( dtls_srtp_info->chosen_dtls_srtp_profile == MBEDTLS_TLS_SRTP_UNSET )
{
dtls_srtp_info->mki_len = 0;
}
else
{
dtls_srtp_info->mki_len = ssl->dtls_srtp_info.mki_len;
memcpy( dtls_srtp_info->mki_value, ssl->dtls_srtp_info.mki_value,
ssl->dtls_srtp_info.mki_len );
}
}
#endif /* MBEDTLS_SSL_DTLS_SRTP */
Provide standalone version of `ssl_decrypt_buf` Analogous to the previous commit, but concerning the record decryption routine `ssl_decrypt_buf`. An important change regards the checking of CBC padding: Prior to this commit, the CBC padding check always read 256 bytes at the end of the internal record buffer, almost always going past the boundaries of the record under consideration. In order to stay within the bounds of the given record, this commit changes this behavior by always reading the last min(256, plaintext_len) bytes of the record plaintext buffer and taking into consideration the last `padlen` of these for the padding check. With this change, the memory access pattern and runtime of the padding check is entirely determined by the size of the encrypted record, in particular not giving away any information on the validity of the padding. The following depicts the different behaviors: 1) Previous CBC padding check 1.a) Claimed padding length <= plaintext length +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +------------------------------------... | read for padding check ... +------------------------------------... | contents discarded from here 1.b) Claimed padding length > plaintext length +----------------------------------------+----+ | Record plaintext buffer | PL | +----------------------------------------+----+ +-------------------------... | read for padding check ... +-------------------------... | contents discarded from here 2) New CBC padding check +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +---------------------------------------+ | read for padding check | +---------------------------------------+ | contents discarded until here
2017-12-27 22:28:58 +01:00
void mbedtls_ssl_conf_max_version( mbedtls_ssl_config *conf, int major, int minor )
{
conf->max_tls_version = (major << 8) | minor;
}
Provide standalone version of `ssl_decrypt_buf` Analogous to the previous commit, but concerning the record decryption routine `ssl_decrypt_buf`. An important change regards the checking of CBC padding: Prior to this commit, the CBC padding check always read 256 bytes at the end of the internal record buffer, almost always going past the boundaries of the record under consideration. In order to stay within the bounds of the given record, this commit changes this behavior by always reading the last min(256, plaintext_len) bytes of the record plaintext buffer and taking into consideration the last `padlen` of these for the padding check. With this change, the memory access pattern and runtime of the padding check is entirely determined by the size of the encrypted record, in particular not giving away any information on the validity of the padding. The following depicts the different behaviors: 1) Previous CBC padding check 1.a) Claimed padding length <= plaintext length +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +------------------------------------... | read for padding check ... +------------------------------------... | contents discarded from here 1.b) Claimed padding length > plaintext length +----------------------------------------+----+ | Record plaintext buffer | PL | +----------------------------------------+----+ +-------------------------... | read for padding check ... +-------------------------... | contents discarded from here 2) New CBC padding check +----------------------------------------+----+ | Record plaintext buffer | | PL | +----------------------------------------+----+ \__ PL __/ +---------------------------------------+ | read for padding check | +---------------------------------------+ | contents discarded until here
2017-12-27 22:28:58 +01:00
void mbedtls_ssl_conf_min_version( mbedtls_ssl_config *conf, int major, int minor )
{
conf->min_tls_version = (major << 8) | minor;
}
#if defined(MBEDTLS_SSL_SRV_C)
void mbedtls_ssl_conf_cert_req_ca_list( mbedtls_ssl_config *conf,
char cert_req_ca_list )
{
conf->cert_req_ca_list = cert_req_ca_list;
}
#endif
2014-09-24 13:29:58 +02:00
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
void mbedtls_ssl_conf_encrypt_then_mac( mbedtls_ssl_config *conf, char etm )
{
conf->encrypt_then_mac = etm;
}
#endif
#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
void mbedtls_ssl_conf_extended_master_secret( mbedtls_ssl_config *conf, char ems )
{
conf->extended_ms = ems;
}
#endif
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
int mbedtls_ssl_conf_max_frag_len( mbedtls_ssl_config *conf, unsigned char mfl_code )
{
if( mfl_code >= MBEDTLS_SSL_MAX_FRAG_LEN_INVALID ||
ssl_mfl_code_to_length( mfl_code ) > MBEDTLS_TLS_EXT_ADV_CONTENT_LEN )
{
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
conf->mfl_code = mfl_code;
return( 0 );
}
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
void mbedtls_ssl_conf_legacy_renegotiation( mbedtls_ssl_config *conf, int allow_legacy )
{
conf->allow_legacy_renegotiation = allow_legacy;
}
#if defined(MBEDTLS_SSL_RENEGOTIATION)
void mbedtls_ssl_conf_renegotiation( mbedtls_ssl_config *conf, int renegotiation )
{
conf->disable_renegotiation = renegotiation;
}
void mbedtls_ssl_conf_renegotiation_enforced( mbedtls_ssl_config *conf, int max_records )
{
conf->renego_max_records = max_records;
}
void mbedtls_ssl_conf_renegotiation_period( mbedtls_ssl_config *conf,
const unsigned char period[8] )
{
memcpy( conf->renego_period, period, 8 );
}
#endif /* MBEDTLS_SSL_RENEGOTIATION */
#if defined(MBEDTLS_SSL_SESSION_TICKETS)
#if defined(MBEDTLS_SSL_CLI_C)
void mbedtls_ssl_conf_session_tickets( mbedtls_ssl_config *conf, int use_tickets )
{
conf->session_tickets = use_tickets;
}
#endif
#if defined(MBEDTLS_SSL_SRV_C)
void mbedtls_ssl_conf_session_tickets_cb( mbedtls_ssl_config *conf,
mbedtls_ssl_ticket_write_t *f_ticket_write,
mbedtls_ssl_ticket_parse_t *f_ticket_parse,
void *p_ticket )
{
conf->f_ticket_write = f_ticket_write;
conf->f_ticket_parse = f_ticket_parse;
conf->p_ticket = p_ticket;
}
#endif
#endif /* MBEDTLS_SSL_SESSION_TICKETS */
void mbedtls_ssl_set_export_keys_cb( mbedtls_ssl_context *ssl,
mbedtls_ssl_export_keys_t *f_export_keys,
void *p_export_keys )
{
ssl->f_export_keys = f_export_keys;
ssl->p_export_keys = p_export_keys;
}
#if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
void mbedtls_ssl_conf_async_private_cb(
mbedtls_ssl_config *conf,
mbedtls_ssl_async_sign_t *f_async_sign,
mbedtls_ssl_async_decrypt_t *f_async_decrypt,
mbedtls_ssl_async_resume_t *f_async_resume,
mbedtls_ssl_async_cancel_t *f_async_cancel,
void *async_config_data )
{
conf->f_async_sign_start = f_async_sign;
conf->f_async_decrypt_start = f_async_decrypt;
conf->f_async_resume = f_async_resume;
conf->f_async_cancel = f_async_cancel;
conf->p_async_config_data = async_config_data;
}
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
void *mbedtls_ssl_conf_get_async_config_data( const mbedtls_ssl_config *conf )
{
return( conf->p_async_config_data );
}
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
void *mbedtls_ssl_get_async_operation_data( const mbedtls_ssl_context *ssl )
{
if( ssl->handshake == NULL )
return( NULL );
else
return( ssl->handshake->user_async_ctx );
}
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
void mbedtls_ssl_set_async_operation_data( mbedtls_ssl_context *ssl,
void *ctx )
{
if( ssl->handshake != NULL )
ssl->handshake->user_async_ctx = ctx;
}
#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
/*
* SSL get accessors
*/
uint32_t mbedtls_ssl_get_verify_result( const mbedtls_ssl_context *ssl )
{
if( ssl->session != NULL )
return( ssl->session->verify_result );
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
if( ssl->session_negotiate != NULL )
return( ssl->session_negotiate->verify_result );
return( 0xFFFFFFFF );
}
int mbedtls_ssl_get_ciphersuite_id_from_ssl( const mbedtls_ssl_context *ssl )
{
if( ssl == NULL || ssl->session == NULL )
return( 0 );
return( ssl->session->ciphersuite );
}
const char *mbedtls_ssl_get_ciphersuite( const mbedtls_ssl_context *ssl )
{
if( ssl == NULL || ssl->session == NULL )
return( NULL );
return mbedtls_ssl_get_ciphersuite_name( ssl->session->ciphersuite );
}
const char *mbedtls_ssl_get_version( const mbedtls_ssl_context *ssl )
{
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
{
switch( ssl->tls_version )
{
case MBEDTLS_SSL_VERSION_TLS1_2:
return( "DTLSv1.2" );
default:
return( "unknown (DTLS)" );
}
}
#endif
switch( ssl->tls_version )
{
case MBEDTLS_SSL_VERSION_TLS1_2:
return( "TLSv1.2" );
case MBEDTLS_SSL_VERSION_TLS1_3:
return( "TLSv1.3" );
default:
return( "unknown" );
}
}
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
size_t mbedtls_ssl_get_input_max_frag_len( const mbedtls_ssl_context *ssl )
{
size_t max_len = MBEDTLS_SSL_IN_CONTENT_LEN;
size_t read_mfl;
/* Use the configured MFL for the client if we're past SERVER_HELLO_DONE */
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT &&
ssl->state >= MBEDTLS_SSL_SERVER_HELLO_DONE )
{
return ssl_mfl_code_to_length( ssl->conf->mfl_code );
}
/* Check if a smaller max length was negotiated */
if( ssl->session_out != NULL )
{
read_mfl = ssl_mfl_code_to_length( ssl->session_out->mfl_code );
if( read_mfl < max_len )
{
max_len = read_mfl;
}
}
// During a handshake, use the value being negotiated
if( ssl->session_negotiate != NULL )
{
read_mfl = ssl_mfl_code_to_length( ssl->session_negotiate->mfl_code );
if( read_mfl < max_len )
{
max_len = read_mfl;
}
}
return( max_len );
}
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
size_t mbedtls_ssl_get_output_max_frag_len( const mbedtls_ssl_context *ssl )
{
size_t max_len;
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
/*
* Assume mfl_code is correct since it was checked when set
*/
max_len = ssl_mfl_code_to_length( ssl->conf->mfl_code );
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
/* Check if a smaller max length was negotiated */
if( ssl->session_out != NULL &&
ssl_mfl_code_to_length( ssl->session_out->mfl_code ) < max_len )
{
max_len = ssl_mfl_code_to_length( ssl->session_out->mfl_code );
}
/* During a handshake, use the value being negotiated */
if( ssl->session_negotiate != NULL &&
ssl_mfl_code_to_length( ssl->session_negotiate->mfl_code ) < max_len )
{
max_len = ssl_mfl_code_to_length( ssl->session_negotiate->mfl_code );
}
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
return( max_len );
}
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
#if defined(MBEDTLS_SSL_PROTO_DTLS)
size_t mbedtls_ssl_get_current_mtu( const mbedtls_ssl_context *ssl )
{
/* Return unlimited mtu for client hello messages to avoid fragmentation. */
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT &&
( ssl->state == MBEDTLS_SSL_CLIENT_HELLO ||
ssl->state == MBEDTLS_SSL_SERVER_HELLO ) )
return ( 0 );
if( ssl->handshake == NULL || ssl->handshake->mtu == 0 )
return( ssl->mtu );
if( ssl->mtu == 0 )
return( ssl->handshake->mtu );
return( ssl->mtu < ssl->handshake->mtu ?
ssl->mtu : ssl->handshake->mtu );
}
#endif /* MBEDTLS_SSL_PROTO_DTLS */
int mbedtls_ssl_get_max_out_record_payload( const mbedtls_ssl_context *ssl )
{
size_t max_len = MBEDTLS_SSL_OUT_CONTENT_LEN;
#if !defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) && \
!defined(MBEDTLS_SSL_PROTO_DTLS)
(void) ssl;
#endif
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
const size_t mfl = mbedtls_ssl_get_output_max_frag_len( ssl );
if( max_len > mfl )
max_len = mfl;
#endif
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( mbedtls_ssl_get_current_mtu( ssl ) != 0 )
{
const size_t mtu = mbedtls_ssl_get_current_mtu( ssl );
const int ret = mbedtls_ssl_get_record_expansion( ssl );
const size_t overhead = (size_t) ret;
if( ret < 0 )
return( ret );
if( mtu <= overhead )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "MTU too low for record expansion" ) );
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
}
if( max_len > mtu - overhead )
max_len = mtu - overhead;
}
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if !defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) && \
!defined(MBEDTLS_SSL_PROTO_DTLS)
((void) ssl);
#endif
return( (int) max_len );
}
Implement future message buffering and loading This commit implements future handshake message buffering and loading by implementing ssl_load_buffered_message() and ssl_buffer_message(). Whenever a handshake message is received which is - a future handshake message (i.e., the sequence number is larger than the next expected one), or which is - a proper fragment of the next expected handshake message, ssl_buffer_message() is called, which does the following: - Ignore message if its sequence number is too far ahead of the next expected sequence number, as controlled by the macro constant MBEDTLS_SSL_MAX_BUFFERED_HS. - Otherwise, check if buffering for the message with the respective sequence number has already commenced. - If not, allocate space to back up the message within the buffering substructure of mbedtls_ssl_handshake_params. If the message is a proper fragment, allocate additional space for a reassembly bitmap; if it is a full message, omit the bitmap. In any case, fall throuh to the next case. - If the message has already been buffered, check that the header is the same, and add the current fragment if the message is not yet complete (this excludes the case where a future message has been received in a single fragment, hence omitting the bitmap, and is afterwards also received as a series of proper fragments; in this case, the proper fragments will be ignored). For loading buffered messages in ssl_load_buffered_message(), the approach is the following: - Check the first entry in the buffering window (the window is always based at the next expected handshake message). If buffering hasn't started or if reassembly is still in progress, ignore. If the next expected message has been fully received, copy it to the input buffer (which is empty, as ssl_load_buffered_message() is only called in this case).
2018-08-16 14:55:32 +02:00
int mbedtls_ssl_get_max_in_record_payload( const mbedtls_ssl_context *ssl )
{
size_t max_len = MBEDTLS_SSL_IN_CONTENT_LEN;
#if !defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
(void) ssl;
#endif
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
const size_t mfl = mbedtls_ssl_get_input_max_frag_len( ssl );
if( max_len > mfl )
max_len = mfl;
#endif
return( (int) max_len );
}
#if defined(MBEDTLS_X509_CRT_PARSE_C)
const mbedtls_x509_crt *mbedtls_ssl_get_peer_cert( const mbedtls_ssl_context *ssl )
{
if( ssl == NULL || ssl->session == NULL )
return( NULL );
2014-09-09 17:45:31 +02:00
#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
return( ssl->session->peer_cert );
#else
return( NULL );
#endif /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
}
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_CLI_C)
int mbedtls_ssl_get_session( const mbedtls_ssl_context *ssl,
mbedtls_ssl_session *dst )
{
int ret;
if( ssl == NULL ||
dst == NULL ||
ssl->session == NULL ||
ssl->conf->endpoint != MBEDTLS_SSL_IS_CLIENT )
{
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
/* Since Mbed TLS 3.0, mbedtls_ssl_get_session() is no longer
* idempotent: Each session can only be exported once.
*
* (This is in preparation for TLS 1.3 support where we will
* need the ability to export multiple sessions (aka tickets),
* which will be achieved by calling mbedtls_ssl_get_session()
* multiple times until it fails.)
*
* Check whether we have already exported the current session,
* and fail if so.
*/
if( ssl->session->exported == 1 )
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
ret = mbedtls_ssl_session_copy( dst, ssl->session );
if( ret != 0 )
return( ret );
/* Remember that we've exported the session. */
ssl->session->exported = 1;
return( 0 );
}
#endif /* MBEDTLS_SSL_CLI_C */
/*
* Define ticket header determining Mbed TLS version
* and structure of the ticket.
*/
/*
* Define bitflag determining compile-time settings influencing
* structure of serialized SSL sessions.
*/
#if defined(MBEDTLS_HAVE_TIME)
#define SSL_SERIALIZED_SESSION_CONFIG_TIME 1
#else
#define SSL_SERIALIZED_SESSION_CONFIG_TIME 0
#endif /* MBEDTLS_HAVE_TIME */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#define SSL_SERIALIZED_SESSION_CONFIG_CRT 1
#else
#define SSL_SERIALIZED_SESSION_CONFIG_CRT 0
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_CLI_C) && defined(MBEDTLS_SSL_SESSION_TICKETS)
#define SSL_SERIALIZED_SESSION_CONFIG_CLIENT_TICKET 1
#else
#define SSL_SERIALIZED_SESSION_CONFIG_CLIENT_TICKET 0
#endif /* MBEDTLS_SSL_CLI_C && MBEDTLS_SSL_SESSION_TICKETS */
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
#define SSL_SERIALIZED_SESSION_CONFIG_MFL 1
#else
#define SSL_SERIALIZED_SESSION_CONFIG_MFL 0
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
#define SSL_SERIALIZED_SESSION_CONFIG_ETM 1
#else
#define SSL_SERIALIZED_SESSION_CONFIG_ETM 0
#endif /* MBEDTLS_SSL_ENCRYPT_THEN_MAC */
#if defined(MBEDTLS_SSL_SESSION_TICKETS)
#define SSL_SERIALIZED_SESSION_CONFIG_TICKET 1
#else
#define SSL_SERIALIZED_SESSION_CONFIG_TICKET 0
#endif /* MBEDTLS_SSL_SESSION_TICKETS */
#define SSL_SERIALIZED_SESSION_CONFIG_TIME_BIT 0
#define SSL_SERIALIZED_SESSION_CONFIG_CRT_BIT 1
#define SSL_SERIALIZED_SESSION_CONFIG_CLIENT_TICKET_BIT 2
#define SSL_SERIALIZED_SESSION_CONFIG_MFL_BIT 3
#define SSL_SERIALIZED_SESSION_CONFIG_ETM_BIT 4
#define SSL_SERIALIZED_SESSION_CONFIG_TICKET_BIT 5
#define SSL_SERIALIZED_SESSION_CONFIG_BITFLAG \
( (uint16_t) ( \
( SSL_SERIALIZED_SESSION_CONFIG_TIME << SSL_SERIALIZED_SESSION_CONFIG_TIME_BIT ) | \
( SSL_SERIALIZED_SESSION_CONFIG_CRT << SSL_SERIALIZED_SESSION_CONFIG_CRT_BIT ) | \
( SSL_SERIALIZED_SESSION_CONFIG_CLIENT_TICKET << SSL_SERIALIZED_SESSION_CONFIG_CLIENT_TICKET_BIT ) | \
( SSL_SERIALIZED_SESSION_CONFIG_MFL << SSL_SERIALIZED_SESSION_CONFIG_MFL_BIT ) | \
( SSL_SERIALIZED_SESSION_CONFIG_ETM << SSL_SERIALIZED_SESSION_CONFIG_ETM_BIT ) | \
( SSL_SERIALIZED_SESSION_CONFIG_TICKET << SSL_SERIALIZED_SESSION_CONFIG_TICKET_BIT ) ) )
static unsigned char ssl_serialized_session_header[] = {
MBEDTLS_VERSION_MAJOR,
MBEDTLS_VERSION_MINOR,
MBEDTLS_VERSION_PATCH,
MBEDTLS_BYTE_1( SSL_SERIALIZED_SESSION_CONFIG_BITFLAG ),
MBEDTLS_BYTE_0( SSL_SERIALIZED_SESSION_CONFIG_BITFLAG ),
};
/*
* Serialize a session in the following format:
* (in the presentation language of TLS, RFC 8446 section 3)
*
* struct {
*
* opaque mbedtls_version[3]; // library version: major, minor, patch
* opaque session_format[2]; // library-version specific 16-bit field
* // determining the format of the remaining
* // serialized data.
*
* Note: When updating the format, remember to keep
* these version+format bytes.
*
* // In this version, `session_format` determines
* // the setting of those compile-time
* // configuration options which influence
* // the structure of mbedtls_ssl_session.
*
* uint8_t minor_ver; // Protocol minor version. Possible values:
* // - TLS 1.2 (3)
*
* select (serialized_session.tls_version) {
*
* case MBEDTLS_SSL_VERSION_TLS1_2:
* serialized_session_tls12 data;
*
* };
*
* } serialized_session;
*
*/
static int ssl_session_save( const mbedtls_ssl_session *session,
unsigned char omit_header,
unsigned char *buf,
size_t buf_len,
size_t *olen )
2013-07-16 12:45:26 +02:00
{
unsigned char *p = buf;
size_t used = 0;
if( !omit_header )
2013-07-16 12:45:26 +02:00
{
/*
* Add Mbed TLS version identifier
*/
used += sizeof( ssl_serialized_session_header );
if( used <= buf_len )
{
memcpy( p, ssl_serialized_session_header,
sizeof( ssl_serialized_session_header ) );
p += sizeof( ssl_serialized_session_header );
}
}
/*
* TLS version identifier
*/
used += 1;
if( used <= buf_len )
{
*p++ = MBEDTLS_BYTE_0( session->tls_version );
}
2013-07-16 12:45:26 +02:00
/* Forward to version-specific serialization routine. */
switch( session->tls_version )
{
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
case MBEDTLS_SSL_VERSION_TLS1_2:
{
size_t remaining_len = used <= buf_len ? buf_len - used : 0;
used += ssl_session_save_tls12( session, p, remaining_len );
break;
}
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
2013-07-16 12:45:26 +02:00
default:
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
}
*olen = used;
if( used > buf_len )
return( MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL );
return( 0 );
2014-07-03 19:29:16 +02:00
}
/*
* Public wrapper for ssl_session_save()
*/
int mbedtls_ssl_session_save( const mbedtls_ssl_session *session,
unsigned char *buf,
size_t buf_len,
size_t *olen )
2014-11-05 13:58:53 +01:00
{
return( ssl_session_save( session, 0, buf, buf_len, olen ) );
2014-11-05 13:58:53 +01:00
}
/*
* Deserialize session, see mbedtls_ssl_session_save() for format.
*
* This internal version is wrapped by a public function that cleans up in
* case of error, and has an extra option omit_header.
*/
static int ssl_session_load( mbedtls_ssl_session *session,
unsigned char omit_header,
const unsigned char *buf,
size_t len )
{
const unsigned char *p = buf;
const unsigned char * const end = buf + len;
2013-08-03 13:02:31 +02:00
if( !omit_header )
{
/*
* Check Mbed TLS version identifier
*/
2015-10-02 14:33:37 +02:00
if( (size_t)( end - p ) < sizeof( ssl_serialized_session_header ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( memcmp( p, ssl_serialized_session_header,
sizeof( ssl_serialized_session_header ) ) != 0 )
{
return( MBEDTLS_ERR_SSL_VERSION_MISMATCH );
}
p += sizeof( ssl_serialized_session_header );
}
/*
* TLS version identifier
*/
if( 1 > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session->tls_version = 0x0300 | *p++;
/* Dispatch according to TLS version. */
switch( session->tls_version )
{
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
case MBEDTLS_SSL_VERSION_TLS1_2:
{
size_t remaining_len = ( end - p );
return( ssl_session_load_tls12( session, p, remaining_len ) );
}
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
2015-01-23 15:30:57 +01:00
default:
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
}
/*
* Deserialize session: public wrapper for error cleaning
*/
int mbedtls_ssl_session_load( mbedtls_ssl_session *session,
const unsigned char *buf,
size_t len )
{
int ret = ssl_session_load( session, 0, buf, len );
if( ret != 0 )
mbedtls_ssl_session_free( session );
return( ret );
}
/*
* Perform a single step of the SSL handshake
*/
static int ssl_prepare_handshake_step( mbedtls_ssl_context *ssl )
2012-10-30 08:51:03 +01:00
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
2012-10-30 08:51:03 +01:00
/*
* We may have not been able to send to the peer all the handshake data
* that were written into the output buffer by the previous handshake step,
* if the write to the network callback returned with the
* #MBEDTLS_ERR_SSL_WANT_WRITE error code.
* We proceed to the next handshake step only when all data from the
* previous one have been sent to the peer, thus we make sure that this is
* the case here by calling `mbedtls_ssl_flush_output()`. The function may
* return with the #MBEDTLS_ERR_SSL_WANT_WRITE error code in which case
* we have to wait before to go ahead.
* In the case of TLS 1.3, handshake step handlers do not send data to the
* peer. Data are only sent here and through
* `mbedtls_ssl_handle_pending_alert` in case an error that triggered an
* alert occured.
*/
if( ( ret = mbedtls_ssl_flush_output( ssl ) ) != 0 )
return( ret );
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
ssl->handshake->retransmit_state == MBEDTLS_SSL_RETRANS_SENDING )
{
if( ( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
return( ret );
}
#endif /* MBEDTLS_SSL_PROTO_DTLS */
return( ret );
2012-10-30 08:51:03 +01:00
}
int mbedtls_ssl_handshake_step( mbedtls_ssl_context *ssl )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
if( ssl == NULL ||
ssl->conf == NULL ||
ssl->handshake == NULL ||
mbedtls_ssl_is_handshake_over( ssl ) == 1 )
{
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
ret = ssl_prepare_handshake_step( ssl );
if( ret != 0 )
return( ret );
ret = mbedtls_ssl_handle_pending_alert( ssl );
if( ret != 0 )
goto cleanup;
#if defined(MBEDTLS_SSL_CLI_C)
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "client state: %s",
mbedtls_ssl_states_str( ssl->state ) ) );
switch( ssl->state )
{
case MBEDTLS_SSL_HELLO_REQUEST:
ssl->state = MBEDTLS_SSL_CLIENT_HELLO;
break;
case MBEDTLS_SSL_CLIENT_HELLO:
ret = mbedtls_ssl_write_client_hello( ssl );
break;
default:
#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && defined(MBEDTLS_SSL_PROTO_TLS1_3)
if( ssl->tls_version == MBEDTLS_SSL_VERSION_TLS1_3 )
ret = mbedtls_ssl_tls13_handshake_client_step( ssl );
else
ret = mbedtls_ssl_handshake_client_step( ssl );
#elif defined(MBEDTLS_SSL_PROTO_TLS1_2)
ret = mbedtls_ssl_handshake_client_step( ssl );
#else
ret = mbedtls_ssl_tls13_handshake_client_step( ssl );
#endif
}
}
#endif
#if defined(MBEDTLS_SSL_SRV_C)
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
{
#if defined(MBEDTLS_SSL_PROTO_TLS1_3)
if( mbedtls_ssl_conf_is_tls13_only( ssl->conf ) )
ret = mbedtls_ssl_tls13_handshake_server_step( ssl );
#endif /* MBEDTLS_SSL_PROTO_TLS1_3 */
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
if( mbedtls_ssl_conf_is_tls12_only( ssl->conf ) )
ret = mbedtls_ssl_handshake_server_step( ssl );
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
}
#endif
if( ret != 0 )
{
/* handshake_step return error. And it is same
* with alert_reason.
*/
if( ssl->send_alert )
{
ret = mbedtls_ssl_handle_pending_alert( ssl );
goto cleanup;
}
}
cleanup:
return( ret );
}
/*
* Perform the SSL handshake
*/
int mbedtls_ssl_handshake( mbedtls_ssl_context *ssl )
{
int ret = 0;
/* Sanity checks */
if( ssl == NULL || ssl->conf == NULL )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
( ssl->f_set_timer == NULL || ssl->f_get_timer == NULL ) )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "You must use "
"mbedtls_ssl_set_timer_cb() for DTLS" ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
#endif /* MBEDTLS_SSL_PROTO_DTLS */
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> handshake" ) );
/* Main handshake loop */
while( mbedtls_ssl_is_handshake_over( ssl ) == 0 )
{
ret = mbedtls_ssl_handshake_step( ssl );
if( ret != 0 )
break;
}
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= handshake" ) );
return( ret );
}
#if defined(MBEDTLS_SSL_RENEGOTIATION)
#if defined(MBEDTLS_SSL_SRV_C)
/*
* Write HelloRequest to request renegotiation on server
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
*/
static int ssl_write_hello_request( mbedtls_ssl_context *ssl )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write hello request" ) );
ssl->out_msglen = 4;
ssl->out_msgtype = MBEDTLS_SSL_MSG_HANDSHAKE;
ssl->out_msg[0] = MBEDTLS_SSL_HS_HELLO_REQUEST;
if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write hello request" ) );
return( 0 );
}
#endif /* MBEDTLS_SSL_SRV_C */
/*
* Actually renegotiate current connection, triggered by either:
* - any side: calling mbedtls_ssl_renegotiate(),
* - client: receiving a HelloRequest during mbedtls_ssl_read(),
* - server: receiving any handshake message on server during mbedtls_ssl_read() after
* the initial handshake is completed.
* If the handshake doesn't complete due to waiting for I/O, it will continue
* during the next calls to mbedtls_ssl_renegotiate() or mbedtls_ssl_read() respectively.
*/
int mbedtls_ssl_start_renegotiation( mbedtls_ssl_context *ssl )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> renegotiate" ) );
if( ( ret = ssl_handshake_init( ssl ) ) != 0 )
return( ret );
/* RFC 6347 4.2.2: "[...] the HelloRequest will have message_seq = 0 and
* the ServerHello will have message_seq = 1" */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
ssl->renego_status == MBEDTLS_SSL_RENEGOTIATION_PENDING )
{
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
ssl->handshake->out_msg_seq = 1;
else
ssl->handshake->in_msg_seq = 1;
}
#endif
ssl->state = MBEDTLS_SSL_HELLO_REQUEST;
ssl->renego_status = MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS;
if( ( ret = mbedtls_ssl_handshake( ssl ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_handshake", ret );
return( ret );
}
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= renegotiate" ) );
return( 0 );
}
/*
* Renegotiate current connection on client,
* or request renegotiation on server
*/
int mbedtls_ssl_renegotiate( mbedtls_ssl_context *ssl )
{
int ret = MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE;
if( ssl == NULL || ssl->conf == NULL )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
#if defined(MBEDTLS_SSL_SRV_C)
/* On server, just send the request */
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
{
if( mbedtls_ssl_is_handshake_over( ssl ) == 0 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
ssl->renego_status = MBEDTLS_SSL_RENEGOTIATION_PENDING;
/* Did we already try/start sending HelloRequest? */
if( ssl->out_left != 0 )
return( mbedtls_ssl_flush_output( ssl ) );
return( ssl_write_hello_request( ssl ) );
}
#endif /* MBEDTLS_SSL_SRV_C */
#if defined(MBEDTLS_SSL_CLI_C)
/*
* On client, either start the renegotiation process or,
* if already in progress, continue the handshake
*/
if( ssl->renego_status != MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS )
{
if( mbedtls_ssl_is_handshake_over( ssl ) == 0 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( ( ret = mbedtls_ssl_start_renegotiation( ssl ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_start_renegotiation", ret );
return( ret );
}
}
else
{
if( ( ret = mbedtls_ssl_handshake( ssl ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_handshake", ret );
return( ret );
}
}
#endif /* MBEDTLS_SSL_CLI_C */
return( ret );
}
#endif /* MBEDTLS_SSL_RENEGOTIATION */
void mbedtls_ssl_handshake_free( mbedtls_ssl_context *ssl )
{
mbedtls_ssl_handshake_params *handshake = ssl->handshake;
if( handshake == NULL )
return;
#if defined(MBEDTLS_ECP_C)
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
if ( ssl->handshake->group_list_heap_allocated )
mbedtls_free( (void*) handshake->group_list );
handshake->group_list = NULL;
#endif /* MBEDTLS_DEPRECATED_REMOVED */
#endif /* MBEDTLS_ECP_C */
#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
if ( ssl->handshake->sig_algs_heap_allocated )
mbedtls_free( (void*) handshake->sig_algs );
handshake->sig_algs = NULL;
#endif /* MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SSL_PROTO_TLS1_3)
if( ssl->handshake->certificate_request_context )
{
mbedtls_free( (void*) handshake->certificate_request_context );
}
#endif /* MBEDTLS_SSL_PROTO_TLS1_3 */
#endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
#if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
if( ssl->conf->f_async_cancel != NULL && handshake->async_in_progress != 0 )
{
ssl->conf->f_async_cancel( ssl );
handshake->async_in_progress = 0;
}
#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
#if defined(MBEDTLS_SHA256_C)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_hash_abort( &handshake->fin_sha256_psa );
#else
mbedtls_sha256_free( &handshake->fin_sha256 );
#endif
#endif
#if defined(MBEDTLS_SHA384_C)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_hash_abort( &handshake->fin_sha384_psa );
#else
mbedtls_sha512_free( &handshake->fin_sha512 );
#endif
#endif
#if defined(MBEDTLS_DHM_C)
mbedtls_dhm_free( &handshake->dhm_ctx );
#endif
#if !defined(MBEDTLS_USE_PSA_CRYPTO) && defined(MBEDTLS_ECDH_C)
mbedtls_ecdh_free( &handshake->ecdh_ctx );
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
mbedtls_ecjpake_free( &handshake->ecjpake_ctx );
#if defined(MBEDTLS_SSL_CLI_C)
mbedtls_free( handshake->ecjpake_cache );
handshake->ecjpake_cache = NULL;
handshake->ecjpake_cache_len = 0;
#endif
#endif
#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
/* explicit void pointer cast for buggy MS compiler */
mbedtls_free( (void *) handshake->curves );
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
if( handshake->psk != NULL )
{
mbedtls_platform_zeroize( handshake->psk, handshake->psk_len );
mbedtls_free( handshake->psk );
}
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C) && \
defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
/*
* Free only the linked list wrapper, not the keys themselves
* since the belong to the SNI callback
*/
ssl_key_cert_free( handshake->sni_key_cert );
#endif /* MBEDTLS_X509_CRT_PARSE_C && MBEDTLS_SSL_SERVER_NAME_INDICATION */
#if defined(MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED)
mbedtls_x509_crt_restart_free( &handshake->ecrs_ctx );
if( handshake->ecrs_peer_cert != NULL )
{
mbedtls_x509_crt_free( handshake->ecrs_peer_cert );
mbedtls_free( handshake->ecrs_peer_cert );
}
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C) && \
!defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
mbedtls_pk_free( &handshake->peer_pubkey );
#endif /* MBEDTLS_X509_CRT_PARSE_C && !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
#if defined(MBEDTLS_SSL_CLI_C) && \
( defined(MBEDTLS_SSL_PROTO_DTLS) || defined(MBEDTLS_SSL_PROTO_TLS1_3) )
mbedtls_free( handshake->cookie );
#endif /* MBEDTLS_SSL_CLI_C &&
( MBEDTLS_SSL_PROTO_DTLS || MBEDTLS_SSL_PROTO_TLS1_3 ) */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
mbedtls_ssl_flight_free( handshake->flight );
mbedtls_ssl_buffering_free( ssl );
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_ECDH_C) && \
( defined(MBEDTLS_USE_PSA_CRYPTO) || defined(MBEDTLS_SSL_PROTO_TLS1_3) )
if( handshake->ecdh_psa_privkey_is_external == 0 )
psa_destroy_key( handshake->ecdh_psa_privkey );
#endif /* MBEDTLS_ECDH_C && MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_SSL_PROTO_TLS1_3)
mbedtls_ssl_transform_free( handshake->transform_handshake );
mbedtls_ssl_transform_free( handshake->transform_earlydata );
mbedtls_free( handshake->transform_earlydata );
mbedtls_free( handshake->transform_handshake );
#endif /* MBEDTLS_SSL_PROTO_TLS1_3 */
#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
/* If the buffers are too big - reallocate. Because of the way Mbed TLS
* processes datagrams and the fact that a datagram is allowed to have
* several records in it, it is possible that the I/O buffers are not
* empty at this stage */
handle_buffer_resizing( ssl, 1, mbedtls_ssl_get_input_buflen( ssl ),
mbedtls_ssl_get_output_buflen( ssl ) );
#endif
/* mbedtls_platform_zeroize MUST be last one in this function */
mbedtls_platform_zeroize( handshake,
sizeof( mbedtls_ssl_handshake_params ) );
}
void mbedtls_ssl_session_free( mbedtls_ssl_session *session )
{
if( session == NULL )
return;
#if defined(MBEDTLS_X509_CRT_PARSE_C)
ssl_clear_peer_cert( session );
#endif
#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C)
mbedtls_free( session->ticket );
#endif
mbedtls_platform_zeroize( session, sizeof( mbedtls_ssl_session ) );
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
}
#if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION)
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
#define SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_CONNECTION_ID 1u
#else
#define SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_CONNECTION_ID 0u
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
#define SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_BADMAC_LIMIT 1u
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
#define SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_ANTI_REPLAY 1u
#else
#define SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_ANTI_REPLAY 0u
#endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */
#if defined(MBEDTLS_SSL_ALPN)
#define SSL_SERIALIZED_CONTEXT_CONFIG_ALPN 1u
#else
#define SSL_SERIALIZED_CONTEXT_CONFIG_ALPN 0u
#endif /* MBEDTLS_SSL_ALPN */
#define SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_CONNECTION_ID_BIT 0
#define SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_BADMAC_LIMIT_BIT 1
#define SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_ANTI_REPLAY_BIT 2
#define SSL_SERIALIZED_CONTEXT_CONFIG_ALPN_BIT 3
#define SSL_SERIALIZED_CONTEXT_CONFIG_BITFLAG \
( (uint32_t) ( \
( SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_CONNECTION_ID << SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_CONNECTION_ID_BIT ) | \
( SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_BADMAC_LIMIT << SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_BADMAC_LIMIT_BIT ) | \
( SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_ANTI_REPLAY << SSL_SERIALIZED_CONTEXT_CONFIG_DTLS_ANTI_REPLAY_BIT ) | \
( SSL_SERIALIZED_CONTEXT_CONFIG_ALPN << SSL_SERIALIZED_CONTEXT_CONFIG_ALPN_BIT ) | \
0u ) )
static unsigned char ssl_serialized_context_header[] = {
MBEDTLS_VERSION_MAJOR,
MBEDTLS_VERSION_MINOR,
MBEDTLS_VERSION_PATCH,
MBEDTLS_BYTE_1( SSL_SERIALIZED_SESSION_CONFIG_BITFLAG ),
MBEDTLS_BYTE_0( SSL_SERIALIZED_SESSION_CONFIG_BITFLAG ),
MBEDTLS_BYTE_2( SSL_SERIALIZED_CONTEXT_CONFIG_BITFLAG ),
MBEDTLS_BYTE_1( SSL_SERIALIZED_CONTEXT_CONFIG_BITFLAG ),
MBEDTLS_BYTE_0( SSL_SERIALIZED_CONTEXT_CONFIG_BITFLAG ),
};
/*
* Serialize a full SSL context
*
* The format of the serialized data is:
* (in the presentation language of TLS, RFC 8446 section 3)
*
* // header
* opaque mbedtls_version[3]; // major, minor, patch
* opaque context_format[5]; // version-specific field determining
* // the format of the remaining
* // serialized data.
* Note: When updating the format, remember to keep these
* version+format bytes. (We may make their size part of the API.)
*
* // session sub-structure
* opaque session<1..2^32-1>; // see mbedtls_ssl_session_save()
* // transform sub-structure
* uint8 random[64]; // ServerHello.random+ClientHello.random
* uint8 in_cid<0..2^8-1> // Connection ID: expected incoming value
* uint8 out_cid<0..2^8-1> // Connection ID: outgoing value to use
* // fields from ssl_context
* uint32 badmac_seen; // DTLS: number of records with failing MAC
* uint64 in_window_top; // DTLS: last validated record seq_num
* uint64 in_window; // DTLS: bitmask for replay protection
* uint8 disable_datagram_packing; // DTLS: only one record per datagram
* uint64 cur_out_ctr; // Record layer: outgoing sequence number
* uint16 mtu; // DTLS: path mtu (max outgoing fragment size)
* uint8 alpn_chosen<0..2^8-1> // ALPN: negotiated application protocol
*
* Note that many fields of the ssl_context or sub-structures are not
* serialized, as they fall in one of the following categories:
*
* 1. forced value (eg in_left must be 0)
* 2. pointer to dynamically-allocated memory (eg session, transform)
* 3. value can be re-derived from other data (eg session keys from MS)
* 4. value was temporary (eg content of input buffer)
* 5. value will be provided by the user again (eg I/O callbacks and context)
*/
int mbedtls_ssl_context_save( mbedtls_ssl_context *ssl,
unsigned char *buf,
size_t buf_len,
size_t *olen )
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
{
unsigned char *p = buf;
size_t used = 0;
size_t session_len;
int ret = 0;
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
/*
* Enforce usage restrictions, see "return BAD_INPUT_DATA" in
* this function's documentation.
*
* These are due to assumptions/limitations in the implementation. Some of
* them are likely to stay (no handshake in progress) some might go away
* (only DTLS) but are currently used to simplify the implementation.
*/
/* The initial handshake must be over */
if( mbedtls_ssl_is_handshake_over( ssl ) == 0 )
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "Initial handshake isn't over" ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
if( ssl->handshake != NULL )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "Handshake isn't completed" ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
/* Double-check that sub-structures are indeed ready */
if( ssl->transform == NULL || ssl->session == NULL )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "Serialised structures aren't ready" ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
/* There must be no pending incoming or outgoing data */
if( mbedtls_ssl_check_pending( ssl ) != 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "There is pending incoming data" ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
if( ssl->out_left != 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "There is pending outgoing data" ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
}
/* Protocol must be DLTS, not TLS */
if( ssl->conf->transport != MBEDTLS_SSL_TRANSPORT_DATAGRAM )
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "Only DTLS is supported" ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
}
/* Version must be 1.2 */
if( ssl->tls_version != MBEDTLS_SSL_VERSION_TLS1_2 )
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "Only version 1.2 supported" ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
}
/* We must be using an AEAD ciphersuite */
if( mbedtls_ssl_transform_uses_aead( ssl->transform ) != 1 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "Only AEAD ciphersuites supported" ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
/* Renegotiation must not be enabled */
#if defined(MBEDTLS_SSL_RENEGOTIATION)
if( ssl->conf->disable_renegotiation != MBEDTLS_SSL_RENEGOTIATION_DISABLED )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "Renegotiation must not be enabled" ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
}
#endif
/*
* Version and format identifier
*/
used += sizeof( ssl_serialized_context_header );
if( used <= buf_len )
{
memcpy( p, ssl_serialized_context_header,
sizeof( ssl_serialized_context_header ) );
p += sizeof( ssl_serialized_context_header );
}
/*
* Session (length + data)
*/
ret = ssl_session_save( ssl->session, 1, NULL, 0, &session_len );
if( ret != MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL )
return( ret );
used += 4 + session_len;
if( used <= buf_len )
{
MBEDTLS_PUT_UINT32_BE( session_len, p, 0 );
p += 4;
2014-09-23 09:42:16 +02:00
ret = ssl_session_save( ssl->session, 1,
p, session_len, &session_len );
if( ret != 0 )
return( ret );
2014-09-23 09:42:16 +02:00
p += session_len;
}
/*
* Transform
*/
used += sizeof( ssl->transform->randbytes );
if( used <= buf_len )
{
memcpy( p, ssl->transform->randbytes,
sizeof( ssl->transform->randbytes ) );
p += sizeof( ssl->transform->randbytes );
}
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
used += 2 + ssl->transform->in_cid_len + ssl->transform->out_cid_len;
if( used <= buf_len )
{
*p++ = ssl->transform->in_cid_len;
memcpy( p, ssl->transform->in_cid, ssl->transform->in_cid_len );
p += ssl->transform->in_cid_len;
*p++ = ssl->transform->out_cid_len;
memcpy( p, ssl->transform->out_cid, ssl->transform->out_cid_len );
p += ssl->transform->out_cid_len;
}
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
/*
* Saved fields from top-level ssl_context structure
*/
used += 4;
if( used <= buf_len )
{
MBEDTLS_PUT_UINT32_BE( ssl->badmac_seen, p, 0 );
p += 4;
}
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
used += 16;
if( used <= buf_len )
{
MBEDTLS_PUT_UINT64_BE( ssl->in_window_top, p, 0 );
p += 8;
MBEDTLS_PUT_UINT64_BE( ssl->in_window, p, 0 );
p += 8;
}
#endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
used += 1;
if( used <= buf_len )
{
*p++ = ssl->disable_datagram_packing;
}
#endif /* MBEDTLS_SSL_PROTO_DTLS */
used += MBEDTLS_SSL_SEQUENCE_NUMBER_LEN;
if( used <= buf_len )
{
memcpy( p, ssl->cur_out_ctr, MBEDTLS_SSL_SEQUENCE_NUMBER_LEN );
p += MBEDTLS_SSL_SEQUENCE_NUMBER_LEN;
}
#if defined(MBEDTLS_SSL_PROTO_DTLS)
used += 2;
if( used <= buf_len )
{
MBEDTLS_PUT_UINT16_BE( ssl->mtu, p, 0 );
p += 2;
}
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_SSL_ALPN)
{
const uint8_t alpn_len = ssl->alpn_chosen
? (uint8_t) strlen( ssl->alpn_chosen )
: 0;
used += 1 + alpn_len;
if( used <= buf_len )
{
*p++ = alpn_len;
if( ssl->alpn_chosen != NULL )
{
memcpy( p, ssl->alpn_chosen, alpn_len );
p += alpn_len;
}
}
}
#endif /* MBEDTLS_SSL_ALPN */
/*
* Done
*/
*olen = used;
if( used > buf_len )
return( MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL );
MBEDTLS_SSL_DEBUG_BUF( 4, "saved context", buf, used );
return( mbedtls_ssl_session_reset_int( ssl, 0 ) );
}
/*
* Deserialize context, see mbedtls_ssl_context_save() for format.
*
* This internal version is wrapped by a public function that cleans up in
* case of error.
*/
static int ssl_context_load( mbedtls_ssl_context *ssl,
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
const unsigned char *buf,
size_t len )
{
const unsigned char *p = buf;
const unsigned char * const end = buf + len;
size_t session_len;
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
/*
* The context should have been freshly setup or reset.
* Give the user an error in case of obvious misuse.
* (Checking session is useful because it won't be NULL if we're
* renegotiating, or if the user mistakenly loaded a session first.)
*/
if( ssl->state != MBEDTLS_SSL_HELLO_REQUEST ||
ssl->session != NULL )
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
{
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
/*
* We can't check that the config matches the initial one, but we can at
* least check it matches the requirements for serializing.
*/
if( ssl->conf->transport != MBEDTLS_SSL_TRANSPORT_DATAGRAM ||
ssl->conf->max_tls_version < MBEDTLS_SSL_VERSION_TLS1_2 ||
ssl->conf->min_tls_version > MBEDTLS_SSL_VERSION_TLS1_2 ||
#if defined(MBEDTLS_SSL_RENEGOTIATION)
ssl->conf->disable_renegotiation != MBEDTLS_SSL_RENEGOTIATION_DISABLED ||
#endif
0 )
{
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
}
MBEDTLS_SSL_DEBUG_BUF( 4, "context to load", buf, len );
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
/*
* Check version identifier
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
*/
if( (size_t)( end - p ) < sizeof( ssl_serialized_context_header ) )
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( memcmp( p, ssl_serialized_context_header,
sizeof( ssl_serialized_context_header ) ) != 0 )
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
{
return( MBEDTLS_ERR_SSL_VERSION_MISMATCH );
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
}
p += sizeof( ssl_serialized_context_header );
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
/*
* Session
*/
if( (size_t)( end - p ) < 4 )
Store TLS version in SSL session structure Instances of `mbedtls_ssl_session` represent data enabling session resumption. With the introduction of TLS 1.3, the format of this data changes. We therefore need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish 1.2 and 1.3 sessions. This commit introduces such a TLS-version field to mbedtls_ssl_session. The change has a few ramifications: - Session serialization/deserialization routines need to be adjusted. This is achieved by adding the TLS-version after the header of Mbed TLS version+config, and by having the subsequent structure of the serialized data depend on the value of this field. The details are described in terms of the RFC 8446 presentation language. The 1.2 session (de)serialization are moved into static helper functions, while the top-level session (de)serialization only parses the Mbed TLS version+config header and the TLS-version field, and dispatches according to the found version. This way, it will be easy to add support for TLS 1.3 sessions in the future. - Tests for session serialization need to be adjusted - Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3, we will need to have some logic comparing the TLS version of the proposed session to the negotiated TLS version. For now, however, we only support TLS 1.2, and no such logic is needed. Instead, we just store the TLS version in the session structure at the same point when we populate mbedtls_ssl_context.minor_ver. The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and `mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved. However, with both fields being private and explicitly marked so, this can happen in a later change. Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-07-23 07:25:48 +02:00
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session_len = ( (size_t) p[0] << 24 ) |
( (size_t) p[1] << 16 ) |
( (size_t) p[2] << 8 ) |
( (size_t) p[3] );
p += 4;
/* This has been allocated by ssl_handshake_init(), called by
* by either mbedtls_ssl_session_reset_int() or mbedtls_ssl_setup(). */
ssl->session = ssl->session_negotiate;
ssl->session_in = ssl->session;
ssl->session_out = ssl->session;
ssl->session_negotiate = NULL;
if( (size_t)( end - p ) < session_len )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
2014-10-15 13:52:48 +02:00
ret = ssl_session_load( ssl->session, 1, p, session_len );
if( ret != 0 )
{
mbedtls_ssl_session_free( ssl->session );
return( ret );
}
p += session_len;
/*
* Transform
*/
/* This has been allocated by ssl_handshake_init(), called by
* by either mbedtls_ssl_session_reset_int() or mbedtls_ssl_setup(). */
ssl->transform = ssl->transform_negotiate;
ssl->transform_in = ssl->transform;
ssl->transform_out = ssl->transform;
ssl->transform_negotiate = NULL;
/* Read random bytes and populate structure */
if( (size_t)( end - p ) < sizeof( ssl->transform->randbytes ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
ret = ssl_tls12_populate_transform( ssl->transform,
ssl->session->ciphersuite,
ssl->session->master,
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM)
ssl->session->encrypt_then_mac,
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM */
ssl_tls12prf_from_cs( ssl->session->ciphersuite ),
p, /* currently pointing to randbytes */
MBEDTLS_SSL_VERSION_TLS1_2, /* (D)TLS 1.2 is forced */
ssl->conf->endpoint,
ssl );
if( ret != 0 )
return( ret );
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
p += sizeof( ssl->transform->randbytes );
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
/* Read connection IDs and store them */
if( (size_t)( end - p ) < 1 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
ssl->transform->in_cid_len = *p++;
if( (size_t)( end - p ) < ssl->transform->in_cid_len + 1u )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
memcpy( ssl->transform->in_cid, p, ssl->transform->in_cid_len );
p += ssl->transform->in_cid_len;
ssl->transform->out_cid_len = *p++;
if( (size_t)( end - p ) < ssl->transform->out_cid_len )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
memcpy( ssl->transform->out_cid, p, ssl->transform->out_cid_len );
p += ssl->transform->out_cid_len;
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
/*
* Saved fields from top-level ssl_context structure
*/
if( (size_t)( end - p ) < 4 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
ssl->badmac_seen = ( (uint32_t) p[0] << 24 ) |
( (uint32_t) p[1] << 16 ) |
( (uint32_t) p[2] << 8 ) |
( (uint32_t) p[3] );
p += 4;
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
if( (size_t)( end - p ) < 16 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
ssl->in_window_top = ( (uint64_t) p[0] << 56 ) |
( (uint64_t) p[1] << 48 ) |
( (uint64_t) p[2] << 40 ) |
( (uint64_t) p[3] << 32 ) |
( (uint64_t) p[4] << 24 ) |
( (uint64_t) p[5] << 16 ) |
( (uint64_t) p[6] << 8 ) |
( (uint64_t) p[7] );
p += 8;
2017-09-21 13:49:50 +02:00
ssl->in_window = ( (uint64_t) p[0] << 56 ) |
( (uint64_t) p[1] << 48 ) |
( (uint64_t) p[2] << 40 ) |
( (uint64_t) p[3] << 32 ) |
( (uint64_t) p[4] << 24 ) |
( (uint64_t) p[5] << 16 ) |
( (uint64_t) p[6] << 8 ) |
( (uint64_t) p[7] );
p += 8;
#endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( (size_t)( end - p ) < 1 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
ssl->disable_datagram_packing = *p++;
#endif /* MBEDTLS_SSL_PROTO_DTLS */
if( (size_t)( end - p ) < sizeof( ssl->cur_out_ctr ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
memcpy( ssl->cur_out_ctr, p, sizeof( ssl->cur_out_ctr ) );
p += sizeof( ssl->cur_out_ctr );
2017-09-21 13:49:50 +02:00
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( (size_t)( end - p ) < 2 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
ssl->mtu = ( p[0] << 8 ) | p[1];
p += 2;
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_SSL_ALPN)
{
uint8_t alpn_len;
const char **cur;
if( (size_t)( end - p ) < 1 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
alpn_len = *p++;
if( alpn_len != 0 && ssl->conf->alpn_list != NULL )
{
/* alpn_chosen should point to an item in the configured list */
for( cur = ssl->conf->alpn_list; *cur != NULL; cur++ )
{
if( strlen( *cur ) == alpn_len &&
memcmp( p, cur, alpn_len ) == 0 )
{
ssl->alpn_chosen = *cur;
break;
}
}
}
/* can only happen on conf mismatch */
if( alpn_len != 0 && ssl->alpn_chosen == NULL )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
2015-01-07 12:39:44 +01:00
p += alpn_len;
}
#endif /* MBEDTLS_SSL_ALPN */
/*
* Forced fields from top-level ssl_context structure
*
* Most of them already set to the correct value by mbedtls_ssl_init() and
* mbedtls_ssl_reset(), so we only need to set the remaining ones.
*/
ssl->state = MBEDTLS_SSL_HANDSHAKE_OVER;
ssl->tls_version = MBEDTLS_SSL_VERSION_TLS1_2;
/* Adjust pointers for header fields of outgoing records to
* the given transform, accounting for explicit IV and CID. */
mbedtls_ssl_update_out_pointers( ssl, ssl->transform );
#if defined(MBEDTLS_SSL_PROTO_DTLS)
ssl->in_epoch = 1;
#endif
/* mbedtls_ssl_reset() leaves the handshake sub-structure allocated,
* which we don't want - otherwise we'd end up freeing the wrong transform
* by calling mbedtls_ssl_handshake_wrapup_free_hs_transform()
* inappropriately. */
if( ssl->handshake != NULL )
2015-01-07 12:39:44 +01:00
{
mbedtls_ssl_handshake_free( ssl );
mbedtls_free( ssl->handshake );
ssl->handshake = NULL;
2015-01-07 12:39:44 +01:00
}
/*
* Done - should have consumed entire buffer
*/
if( p != end )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
2015-01-07 12:39:44 +01:00
return( 0 );
2015-01-07 12:39:44 +01:00
}
/*
* Deserialize context: public wrapper for error cleaning
*/
int mbedtls_ssl_context_load( mbedtls_ssl_context *context,
const unsigned char *buf,
size_t len )
{
int ret = ssl_context_load( context, buf, len );
if( ret != 0 )
mbedtls_ssl_free( context );
return( ret );
}
#endif /* MBEDTLS_SSL_CONTEXT_SERIALIZATION */
/*
* Free an SSL context
*/
void mbedtls_ssl_free( mbedtls_ssl_context *ssl )
{
if( ssl == NULL )
return;
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> free" ) );
if( ssl->out_buf != NULL )
{
#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
size_t out_buf_len = ssl->out_buf_len;
#else
size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN;
#endif
mbedtls_platform_zeroize( ssl->out_buf, out_buf_len );
mbedtls_free( ssl->out_buf );
ssl->out_buf = NULL;
}
if( ssl->in_buf != NULL )
{
#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
size_t in_buf_len = ssl->in_buf_len;
#else
size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN;
#endif
mbedtls_platform_zeroize( ssl->in_buf, in_buf_len );
mbedtls_free( ssl->in_buf );
ssl->in_buf = NULL;
}
if( ssl->transform )
{
mbedtls_ssl_transform_free( ssl->transform );
mbedtls_free( ssl->transform );
}
if( ssl->handshake )
{
mbedtls_ssl_handshake_free( ssl );
mbedtls_ssl_transform_free( ssl->transform_negotiate );
mbedtls_ssl_session_free( ssl->session_negotiate );
mbedtls_free( ssl->handshake );
mbedtls_free( ssl->transform_negotiate );
mbedtls_free( ssl->session_negotiate );
}
#if defined(MBEDTLS_SSL_PROTO_TLS1_3)
mbedtls_ssl_transform_free( ssl->transform_application );
mbedtls_free( ssl->transform_application );
#endif /* MBEDTLS_SSL_PROTO_TLS1_3 */
if( ssl->session )
{
mbedtls_ssl_session_free( ssl->session );
mbedtls_free( ssl->session );
}
#if defined(MBEDTLS_X509_CRT_PARSE_C)
if( ssl->hostname != NULL )
{
mbedtls_platform_zeroize( ssl->hostname, strlen( ssl->hostname ) );
mbedtls_free( ssl->hostname );
}
#endif
#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C)
mbedtls_free( ssl->cli_id );
2015-07-06 14:18:56 +02:00
#endif
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= free" ) );
/* Actually clear after last debug message */
mbedtls_platform_zeroize( ssl, sizeof( mbedtls_ssl_context ) );
}
/*
* Initialze mbedtls_ssl_config
*/
void mbedtls_ssl_config_init( mbedtls_ssl_config *conf )
{
memset( conf, 0, sizeof( mbedtls_ssl_config ) );
}
#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
/* The selection should be the same as mbedtls_x509_crt_profile_default in
* x509_crt.c. Here, the order matters. Currently we favor stronger hashes,
* for no fundamental reason.
* See the documentation of mbedtls_ssl_conf_curves() for what we promise
* about this list. */
static int ssl_preset_default_hashes[] = {
#if defined(MBEDTLS_SHA512_C)
MBEDTLS_MD_SHA512,
#endif
#if defined(MBEDTLS_SHA384_C)
MBEDTLS_MD_SHA384,
2015-07-06 14:18:56 +02:00
#endif
#if defined(MBEDTLS_SHA256_C)
MBEDTLS_MD_SHA256,
#endif
MBEDTLS_MD_NONE
};
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
2015-07-06 14:18:56 +02:00
/* The selection should be the same as mbedtls_x509_crt_profile_default in
* x509_crt.c, plus Montgomery curves for ECDHE. Here, the order matters:
* curves with a lower resource usage come first.
* See the documentation of mbedtls_ssl_conf_curves() for what we promise
* about this list.
*/
static uint16_t ssl_preset_default_groups[] = {
#if defined(MBEDTLS_ECP_DP_CURVE25519_ENABLED)
MBEDTLS_SSL_IANA_TLS_GROUP_X25519,
#endif
#if defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED)
MBEDTLS_SSL_IANA_TLS_GROUP_SECP256R1,
#endif
#if defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED)
MBEDTLS_SSL_IANA_TLS_GROUP_SECP384R1,
#endif
#if defined(MBEDTLS_ECP_DP_CURVE448_ENABLED)
MBEDTLS_SSL_IANA_TLS_GROUP_X448,
#endif
#if defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED)
MBEDTLS_SSL_IANA_TLS_GROUP_SECP521R1,
#endif
#if defined(MBEDTLS_ECP_DP_BP256R1_ENABLED)
MBEDTLS_SSL_IANA_TLS_GROUP_BP256R1,
#endif
#if defined(MBEDTLS_ECP_DP_BP384R1_ENABLED)
MBEDTLS_SSL_IANA_TLS_GROUP_BP384R1,
#endif
#if defined(MBEDTLS_ECP_DP_BP512R1_ENABLED)
MBEDTLS_SSL_IANA_TLS_GROUP_BP512R1,
#endif
MBEDTLS_SSL_IANA_TLS_GROUP_NONE
};
static int ssl_preset_suiteb_ciphersuites[] = {
MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,
MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,
0
};
#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
static int ssl_preset_suiteb_hashes[] = {
#if defined(MBEDTLS_SHA256_C)
MBEDTLS_MD_SHA256,
#endif
#if defined(MBEDTLS_SHA384_C)
MBEDTLS_MD_SHA384,
#endif
MBEDTLS_MD_NONE
};
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
/* NOTICE:
* For ssl_preset_*_sig_algs and ssl_tls12_preset_*_sig_algs, the following
* rules SHOULD be upheld.
* - No duplicate entries.
* - But if there is a good reason, do not change the order of the algorithms.
* - ssl_tls12_present* is for TLS 1.2 use only.
* - ssl_preset_* is for TLS 1.3 only or hybrid TLS 1.3/1.2 handshakes.
*/
static uint16_t ssl_preset_default_sig_algs[] = {
2014-07-11 02:43:49 +02:00
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_SHA256_C) && \
defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED)
MBEDTLS_TLS1_3_SIG_ECDSA_SECP256R1_SHA256,
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_SHA256_C &&
MBEDTLS_ECP_DP_SECP256R1_ENABLED */
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_SHA384_C) && \
defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED)
MBEDTLS_TLS1_3_SIG_ECDSA_SECP384R1_SHA384,
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_SHA384_C &&
MBEDTLS_ECP_DP_SECP384R1_ENABLED */
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_SHA512_C) && \
defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED)
MBEDTLS_TLS1_3_SIG_ECDSA_SECP521R1_SHA512,
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_SHA384_C &&
MBEDTLS_ECP_DP_SECP521R1_ENABLED */
#if defined(MBEDTLS_X509_RSASSA_PSS_SUPPORT) && defined(MBEDTLS_SHA256_C)
MBEDTLS_TLS1_3_SIG_RSA_PSS_RSAE_SHA256,
#endif /* MBEDTLS_X509_RSASSA_PSS_SUPPORT && MBEDTLS_SHA256_C */
#if defined(MBEDTLS_RSA_C) && defined(MBEDTLS_SHA512_C)
MBEDTLS_TLS1_3_SIG_RSA_PKCS1_SHA512,
#endif /* MBEDTLS_RSA_C && MBEDTLS_SHA512_C */
#if defined(MBEDTLS_RSA_C) && defined(MBEDTLS_SHA384_C)
MBEDTLS_TLS1_3_SIG_RSA_PKCS1_SHA384,
#endif /* MBEDTLS_RSA_C && MBEDTLS_SHA384_C */
#if defined(MBEDTLS_RSA_C) && defined(MBEDTLS_SHA256_C)
MBEDTLS_TLS1_3_SIG_RSA_PKCS1_SHA256,
#endif /* MBEDTLS_RSA_C && MBEDTLS_SHA256_C */
MBEDTLS_TLS1_3_SIG_NONE
};
/* NOTICE: see above */
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
static uint16_t ssl_tls12_preset_default_sig_algs[] = {
#if defined(MBEDTLS_SHA512_C)
MBEDTLS_SSL_SIG_ALG( MBEDTLS_SSL_HASH_SHA512 )
#endif
#if defined(MBEDTLS_SHA384_C)
MBEDTLS_SSL_SIG_ALG( MBEDTLS_SSL_HASH_SHA384 )
#endif
#if defined(MBEDTLS_SHA256_C)
MBEDTLS_SSL_SIG_ALG( MBEDTLS_SSL_HASH_SHA256 )
#endif
MBEDTLS_TLS1_3_SIG_NONE
};
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
/* NOTICE: see above */
static uint16_t ssl_preset_suiteb_sig_algs[] = {
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_SHA256_C) && \
defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED)
MBEDTLS_TLS1_3_SIG_ECDSA_SECP256R1_SHA256,
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_SHA256_C &&
MBEDTLS_ECP_DP_SECP256R1_ENABLED */
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_SHA384_C) && \
defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED)
MBEDTLS_TLS1_3_SIG_ECDSA_SECP384R1_SHA384,
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_SHA384_C &&
MBEDTLS_ECP_DP_SECP384R1_ENABLED */
#if defined(MBEDTLS_X509_RSASSA_PSS_SUPPORT) && defined(MBEDTLS_SHA256_C)
MBEDTLS_TLS1_3_SIG_RSA_PSS_RSAE_SHA256,
#endif /* MBEDTLS_X509_RSASSA_PSS_SUPPORT && MBEDTLS_SHA256_C */
#if defined(MBEDTLS_RSA_C) && defined(MBEDTLS_SHA256_C)
MBEDTLS_TLS1_3_SIG_RSA_PKCS1_SHA256,
#endif /* MBEDTLS_RSA_C && MBEDTLS_SHA256_C */
MBEDTLS_TLS1_3_SIG_NONE
};
/* NOTICE: see above */
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
static uint16_t ssl_tls12_preset_suiteb_sig_algs[] = {
#if defined(MBEDTLS_SHA256_C)
MBEDTLS_SSL_SIG_ALG( MBEDTLS_SSL_HASH_SHA256 )
#endif
#if defined(MBEDTLS_SHA384_C)
MBEDTLS_SSL_SIG_ALG( MBEDTLS_SSL_HASH_SHA384 )
#endif
MBEDTLS_TLS1_3_SIG_NONE
};
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
#endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
static uint16_t ssl_preset_suiteb_groups[] = {
#if defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED)
MBEDTLS_SSL_IANA_TLS_GROUP_SECP256R1,
#endif
#if defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED)
MBEDTLS_SSL_IANA_TLS_GROUP_SECP384R1,
#endif
MBEDTLS_SSL_IANA_TLS_GROUP_NONE
};
#if defined(MBEDTLS_DEBUG_C) && defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
/* Function for checking `ssl_preset_*_sig_algs` and `ssl_tls12_preset_*_sig_algs`
* to make sure there are no duplicated signature algorithm entries. */
static int ssl_check_no_sig_alg_duplication( uint16_t * sig_algs )
{
size_t i, j;
int ret = 0;
for( i = 0; sig_algs[i] != MBEDTLS_TLS1_3_SIG_NONE; i++ )
{
for( j = 0; j < i; j++ )
{
if( sig_algs[i] != sig_algs[j] )
continue;
mbedtls_printf( " entry(%04x,%" MBEDTLS_PRINTF_SIZET
") is duplicated at %" MBEDTLS_PRINTF_SIZET "\n",
sig_algs[i], j, i );
ret = -1;
}
}
return( ret );
}
#endif /* MBEDTLS_DEBUG_C && MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
/*
* Load default in mbedtls_ssl_config
*/
int mbedtls_ssl_config_defaults( mbedtls_ssl_config *conf,
int endpoint, int transport, int preset )
{
#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_SRV_C)
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
#endif
#if defined(MBEDTLS_DEBUG_C) && defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
if( ssl_check_no_sig_alg_duplication( ssl_preset_suiteb_sig_algs ) )
{
mbedtls_printf( "ssl_preset_suiteb_sig_algs has duplicated entries\n" );
return( MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED );
}
if( ssl_check_no_sig_alg_duplication( ssl_preset_default_sig_algs ) )
{
mbedtls_printf( "ssl_preset_default_sig_algs has duplicated entries\n" );
return( MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED );
}
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
if( ssl_check_no_sig_alg_duplication( ssl_tls12_preset_suiteb_sig_algs ) )
{
mbedtls_printf( "ssl_tls12_preset_suiteb_sig_algs has duplicated entries\n" );
return( MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED );
}
if( ssl_check_no_sig_alg_duplication( ssl_tls12_preset_default_sig_algs ) )
{
mbedtls_printf( "ssl_tls12_preset_default_sig_algs has duplicated entries\n" );
return( MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED );
}
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
#endif /* MBEDTLS_DEBUG_C && MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
/* Use the functions here so that they are covered in tests,
* but otherwise access member directly for efficiency */
mbedtls_ssl_conf_endpoint( conf, endpoint );
mbedtls_ssl_conf_transport( conf, transport );
/*
* Things that are common to all presets
*/
#if defined(MBEDTLS_SSL_CLI_C)
if( endpoint == MBEDTLS_SSL_IS_CLIENT )
{
conf->authmode = MBEDTLS_SSL_VERIFY_REQUIRED;
#if defined(MBEDTLS_SSL_SESSION_TICKETS)
conf->session_tickets = MBEDTLS_SSL_SESSION_TICKETS_ENABLED;
#endif
}
#endif
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
conf->encrypt_then_mac = MBEDTLS_SSL_ETM_ENABLED;
#endif
#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
conf->extended_ms = MBEDTLS_SSL_EXTENDED_MS_ENABLED;
#endif
#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C)
conf->f_cookie_write = ssl_cookie_write_dummy;
conf->f_cookie_check = ssl_cookie_check_dummy;
#endif
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
conf->anti_replay = MBEDTLS_SSL_ANTI_REPLAY_ENABLED;
#endif
#if defined(MBEDTLS_SSL_SRV_C)
conf->cert_req_ca_list = MBEDTLS_SSL_CERT_REQ_CA_LIST_ENABLED;
conf->respect_cli_pref = MBEDTLS_SSL_SRV_CIPHERSUITE_ORDER_SERVER;
#endif
#if defined(MBEDTLS_SSL_PROTO_DTLS)
conf->hs_timeout_min = MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MIN;
conf->hs_timeout_max = MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MAX;
#endif
#if defined(MBEDTLS_SSL_RENEGOTIATION)
conf->renego_max_records = MBEDTLS_SSL_RENEGO_MAX_RECORDS_DEFAULT;
memset( conf->renego_period, 0x00, 2 );
memset( conf->renego_period + 2, 0xFF, 6 );
#endif
#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_SRV_C)
if( endpoint == MBEDTLS_SSL_IS_SERVER )
{
const unsigned char dhm_p[] =
MBEDTLS_DHM_RFC3526_MODP_2048_P_BIN;
const unsigned char dhm_g[] =
MBEDTLS_DHM_RFC3526_MODP_2048_G_BIN;
if ( ( ret = mbedtls_ssl_conf_dh_param_bin( conf,
dhm_p, sizeof( dhm_p ),
dhm_g, sizeof( dhm_g ) ) ) != 0 )
{
return( ret );
}
}
#endif
#if defined(MBEDTLS_SSL_PROTO_TLS1_3)
/*
* Allow all TLS 1.3 key exchange modes by default.
*/
conf->tls13_kex_modes = MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_ALL;
#endif /* MBEDTLS_SSL_PROTO_TLS1_3 */
if( transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
{
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
conf->min_tls_version = MBEDTLS_SSL_VERSION_TLS1_2;
conf->max_tls_version = MBEDTLS_SSL_VERSION_TLS1_2;
#else
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
#endif
}
else
{
#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && defined(MBEDTLS_SSL_PROTO_TLS1_3)
if( endpoint == MBEDTLS_SSL_IS_CLIENT )
{
conf->min_tls_version = MBEDTLS_SSL_VERSION_TLS1_2;
conf->max_tls_version = MBEDTLS_SSL_VERSION_TLS1_3;
}
else
/* Hybrid TLS 1.2 / 1.3 is not supported on server side yet */
{
conf->min_tls_version = MBEDTLS_SSL_VERSION_TLS1_2;
conf->max_tls_version = MBEDTLS_SSL_VERSION_TLS1_2;
}
#elif defined(MBEDTLS_SSL_PROTO_TLS1_3)
conf->min_tls_version = MBEDTLS_SSL_VERSION_TLS1_3;
conf->max_tls_version = MBEDTLS_SSL_VERSION_TLS1_3;
#elif defined(MBEDTLS_SSL_PROTO_TLS1_2)
conf->min_tls_version = MBEDTLS_SSL_VERSION_TLS1_2;
conf->max_tls_version = MBEDTLS_SSL_VERSION_TLS1_2;
#else
return( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE );
#endif
}
/*
* Preset-specific defaults
*/
switch( preset )
{
/*
* NSA Suite B
*/
case MBEDTLS_SSL_PRESET_SUITEB:
conf->ciphersuite_list = ssl_preset_suiteb_ciphersuites;
#if defined(MBEDTLS_X509_CRT_PARSE_C)
conf->cert_profile = &mbedtls_x509_crt_profile_suiteb;
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
conf->sig_hashes = ssl_preset_suiteb_hashes;
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
if( mbedtls_ssl_conf_is_tls12_only( conf ) )
conf->sig_algs = ssl_tls12_preset_suiteb_sig_algs;
else
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
conf->sig_algs = ssl_preset_suiteb_sig_algs;
#endif
#if defined(MBEDTLS_ECP_C) && !defined(MBEDTLS_DEPRECATED_REMOVED)
conf->curve_list = NULL;
#endif
conf->group_list = ssl_preset_suiteb_groups;
break;
/*
* Default
*/
default:
conf->ciphersuite_list = mbedtls_ssl_list_ciphersuites();
#if defined(MBEDTLS_X509_CRT_PARSE_C)
conf->cert_profile = &mbedtls_x509_crt_profile_default;
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
conf->sig_hashes = ssl_preset_default_hashes;
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
if( mbedtls_ssl_conf_is_tls12_only( conf ) )
conf->sig_algs = ssl_tls12_preset_default_sig_algs;
else
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
conf->sig_algs = ssl_preset_default_sig_algs;
#endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
#if defined(MBEDTLS_ECP_C) && !defined(MBEDTLS_DEPRECATED_REMOVED)
conf->curve_list = NULL;
#endif
conf->group_list = ssl_preset_default_groups;
#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_CLI_C)
conf->dhm_min_bitlen = 1024;
#endif
2019-07-15 09:04:11 +02:00
}
return( 0 );
}
2019-07-15 09:04:11 +02:00
/*
* Free mbedtls_ssl_config
*/
void mbedtls_ssl_config_free( mbedtls_ssl_config *conf )
{
#if defined(MBEDTLS_DHM_C)
mbedtls_mpi_free( &conf->dhm_P );
mbedtls_mpi_free( &conf->dhm_G );
#endif
2019-07-15 09:04:11 +02:00
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
if( conf->psk != NULL )
{
mbedtls_platform_zeroize( conf->psk, conf->psk_len );
mbedtls_free( conf->psk );
conf->psk = NULL;
conf->psk_len = 0;
}
if( conf->psk_identity != NULL )
{
mbedtls_platform_zeroize( conf->psk_identity, conf->psk_identity_len );
mbedtls_free( conf->psk_identity );
conf->psk_identity = NULL;
conf->psk_identity_len = 0;
}
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
ssl_key_cert_free( conf->key_cert );
#endif
mbedtls_platform_zeroize( conf, sizeof( mbedtls_ssl_config ) );
}
#if defined(MBEDTLS_PK_C) && \
( defined(MBEDTLS_RSA_C) || defined(MBEDTLS_ECDSA_C) )
/*
* Convert between MBEDTLS_PK_XXX and SSL_SIG_XXX
*/
unsigned char mbedtls_ssl_sig_from_pk( mbedtls_pk_context *pk )
{
#if defined(MBEDTLS_RSA_C)
if( mbedtls_pk_can_do( pk, MBEDTLS_PK_RSA ) )
return( MBEDTLS_SSL_SIG_RSA );
#endif
#if defined(MBEDTLS_ECDSA_C)
if( mbedtls_pk_can_do( pk, MBEDTLS_PK_ECDSA ) )
return( MBEDTLS_SSL_SIG_ECDSA );
#endif
return( MBEDTLS_SSL_SIG_ANON );
}
unsigned char mbedtls_ssl_sig_from_pk_alg( mbedtls_pk_type_t type )
{
switch( type ) {
case MBEDTLS_PK_RSA:
return( MBEDTLS_SSL_SIG_RSA );
case MBEDTLS_PK_ECDSA:
case MBEDTLS_PK_ECKEY:
return( MBEDTLS_SSL_SIG_ECDSA );
default:
return( MBEDTLS_SSL_SIG_ANON );
}
}
mbedtls_pk_type_t mbedtls_ssl_pk_alg_from_sig( unsigned char sig )
{
switch( sig )
{
#if defined(MBEDTLS_RSA_C)
case MBEDTLS_SSL_SIG_RSA:
return( MBEDTLS_PK_RSA );
#endif
#if defined(MBEDTLS_ECDSA_C)
case MBEDTLS_SSL_SIG_ECDSA:
return( MBEDTLS_PK_ECDSA );
#endif
default:
return( MBEDTLS_PK_NONE );
}
}
#endif /* MBEDTLS_PK_C && ( MBEDTLS_RSA_C || MBEDTLS_ECDSA_C ) */
/*
* Convert from MBEDTLS_SSL_HASH_XXX to MBEDTLS_MD_XXX
*/
mbedtls_md_type_t mbedtls_ssl_md_alg_from_hash( unsigned char hash )
{
switch( hash )
{
#if defined(MBEDTLS_MD5_C)
case MBEDTLS_SSL_HASH_MD5:
return( MBEDTLS_MD_MD5 );
#endif
#if defined(MBEDTLS_SHA1_C)
case MBEDTLS_SSL_HASH_SHA1:
return( MBEDTLS_MD_SHA1 );
#endif
#if defined(MBEDTLS_SHA224_C)
case MBEDTLS_SSL_HASH_SHA224:
return( MBEDTLS_MD_SHA224 );
#endif
#if defined(MBEDTLS_SHA256_C)
case MBEDTLS_SSL_HASH_SHA256:
return( MBEDTLS_MD_SHA256 );
#endif
#if defined(MBEDTLS_SHA384_C)
case MBEDTLS_SSL_HASH_SHA384:
return( MBEDTLS_MD_SHA384 );
#endif
#if defined(MBEDTLS_SHA512_C)
case MBEDTLS_SSL_HASH_SHA512:
return( MBEDTLS_MD_SHA512 );
#endif
default:
return( MBEDTLS_MD_NONE );
}
}
2019-07-15 09:04:11 +02:00
/*
* Convert from MBEDTLS_MD_XXX to MBEDTLS_SSL_HASH_XXX
2019-07-15 09:04:11 +02:00
*/
unsigned char mbedtls_ssl_hash_from_md_alg( int md )
2019-07-15 09:04:11 +02:00
{
switch( md )
{
#if defined(MBEDTLS_MD5_C)
case MBEDTLS_MD_MD5:
return( MBEDTLS_SSL_HASH_MD5 );
#endif
#if defined(MBEDTLS_SHA1_C)
case MBEDTLS_MD_SHA1:
return( MBEDTLS_SSL_HASH_SHA1 );
#endif
#if defined(MBEDTLS_SHA224_C)
case MBEDTLS_MD_SHA224:
return( MBEDTLS_SSL_HASH_SHA224 );
#endif
#if defined(MBEDTLS_SHA256_C)
case MBEDTLS_MD_SHA256:
return( MBEDTLS_SSL_HASH_SHA256 );
#endif
#if defined(MBEDTLS_SHA384_C)
case MBEDTLS_MD_SHA384:
return( MBEDTLS_SSL_HASH_SHA384 );
#endif
#if defined(MBEDTLS_SHA512_C)
case MBEDTLS_MD_SHA512:
return( MBEDTLS_SSL_HASH_SHA512 );
#endif
default:
return( MBEDTLS_SSL_HASH_NONE );
}
2019-07-15 09:04:11 +02:00
}
/*
* Check if a curve proposed by the peer is in our list.
* Return 0 if we're willing to use it, -1 otherwise.
*/
int mbedtls_ssl_check_curve_tls_id( const mbedtls_ssl_context *ssl, uint16_t tls_id )
{
const uint16_t *group_list = mbedtls_ssl_get_groups( ssl );
if( group_list == NULL )
return( -1 );
2019-07-11 09:56:30 +02:00
for( ; *group_list != 0; group_list++ )
2019-07-11 09:56:30 +02:00
{
if( *group_list == tls_id )
return( 0 );
2019-07-11 09:56:30 +02:00
}
return( -1 );
}
#if defined(MBEDTLS_ECP_C)
/*
* Same as mbedtls_ssl_check_curve_tls_id() but with a mbedtls_ecp_group_id.
*/
int mbedtls_ssl_check_curve( const mbedtls_ssl_context *ssl, mbedtls_ecp_group_id grp_id )
{
uint16_t tls_id = mbedtls_ecp_curve_info_from_grp_id( grp_id )->tls_id;
return mbedtls_ssl_check_curve_tls_id( ssl, tls_id );
}
#endif /* MBEDTLS_ECP_C */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
int mbedtls_ssl_check_cert_usage( const mbedtls_x509_crt *cert,
const mbedtls_ssl_ciphersuite_t *ciphersuite,
int cert_endpoint,
uint32_t *flags )
{
int ret = 0;
int usage = 0;
const char *ext_oid;
size_t ext_len;
if( cert_endpoint == MBEDTLS_SSL_IS_SERVER )
{
/* Server part of the key exchange */
switch( ciphersuite->key_exchange )
{
case MBEDTLS_KEY_EXCHANGE_RSA:
case MBEDTLS_KEY_EXCHANGE_RSA_PSK:
usage = MBEDTLS_X509_KU_KEY_ENCIPHERMENT;
break;
case MBEDTLS_KEY_EXCHANGE_DHE_RSA:
case MBEDTLS_KEY_EXCHANGE_ECDHE_RSA:
case MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA:
usage = MBEDTLS_X509_KU_DIGITAL_SIGNATURE;
break;
case MBEDTLS_KEY_EXCHANGE_ECDH_RSA:
case MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA:
usage = MBEDTLS_X509_KU_KEY_AGREEMENT;
break;
/* Don't use default: we want warnings when adding new values */
case MBEDTLS_KEY_EXCHANGE_NONE:
case MBEDTLS_KEY_EXCHANGE_PSK:
case MBEDTLS_KEY_EXCHANGE_DHE_PSK:
case MBEDTLS_KEY_EXCHANGE_ECDHE_PSK:
case MBEDTLS_KEY_EXCHANGE_ECJPAKE:
usage = 0;
}
}
else
{
/* Client auth: we only implement rsa_sign and mbedtls_ecdsa_sign for now */
usage = MBEDTLS_X509_KU_DIGITAL_SIGNATURE;
}
if( mbedtls_x509_crt_check_key_usage( cert, usage ) != 0 )
{
*flags |= MBEDTLS_X509_BADCERT_KEY_USAGE;
ret = -1;
}
2019-07-15 09:04:11 +02:00
if( cert_endpoint == MBEDTLS_SSL_IS_SERVER )
{
ext_oid = MBEDTLS_OID_SERVER_AUTH;
ext_len = MBEDTLS_OID_SIZE( MBEDTLS_OID_SERVER_AUTH );
}
else
{
ext_oid = MBEDTLS_OID_CLIENT_AUTH;
ext_len = MBEDTLS_OID_SIZE( MBEDTLS_OID_CLIENT_AUTH );
}
2019-07-15 09:04:11 +02:00
if( mbedtls_x509_crt_check_extended_key_usage( cert, ext_oid, ext_len ) != 0 )
{
*flags |= MBEDTLS_X509_BADCERT_EXT_KEY_USAGE;
ret = -1;
}
return( ret );
}
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_USE_PSA_CRYPTO)
int mbedtls_ssl_get_handshake_transcript( mbedtls_ssl_context *ssl,
const mbedtls_md_type_t md,
unsigned char *dst,
size_t dst_len,
size_t *olen )
{
psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED;
psa_hash_operation_t *hash_operation_to_clone;
psa_hash_operation_t hash_operation = psa_hash_operation_init();
*olen = 0;
switch( md )
{
#if defined(MBEDTLS_SHA384_C)
case MBEDTLS_MD_SHA384:
hash_operation_to_clone = &ssl->handshake->fin_sha384_psa;
break;
#endif
#if defined(MBEDTLS_SHA256_C)
case MBEDTLS_MD_SHA256:
hash_operation_to_clone = &ssl->handshake->fin_sha256_psa;
break;
#endif
default:
goto exit;
}
status = psa_hash_clone( hash_operation_to_clone, &hash_operation );
if( status != PSA_SUCCESS )
goto exit;
status = psa_hash_finish( &hash_operation, dst, dst_len, olen );
if( status != PSA_SUCCESS )
goto exit;
exit:
return( psa_ssl_status_to_mbedtls( status ) );
}
#else /* MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_SHA384_C)
static int ssl_get_handshake_transcript_sha384( mbedtls_ssl_context *ssl,
unsigned char *dst,
size_t dst_len,
size_t *olen )
{
int ret;
mbedtls_sha512_context sha512;
if( dst_len < 48 )
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
mbedtls_sha512_init( &sha512 );
mbedtls_sha512_clone( &sha512, &ssl->handshake->fin_sha512 );
if( ( ret = mbedtls_sha512_finish( &sha512, dst ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_sha512_finish", ret );
goto exit;
}
*olen = 48;
exit:
mbedtls_sha512_free( &sha512 );
return( ret );
}
#endif /* MBEDTLS_SHA384_C */
#if defined(MBEDTLS_SHA256_C)
static int ssl_get_handshake_transcript_sha256( mbedtls_ssl_context *ssl,
unsigned char *dst,
size_t dst_len,
size_t *olen )
{
int ret;
mbedtls_sha256_context sha256;
if( dst_len < 32 )
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
mbedtls_sha256_init( &sha256 );
mbedtls_sha256_clone( &sha256, &ssl->handshake->fin_sha256 );
if( ( ret = mbedtls_sha256_finish( &sha256, dst ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_sha256_finish", ret );
goto exit;
}
*olen = 32;
2014-07-22 17:32:01 +02:00
exit:
mbedtls_sha256_free( &sha256 );
return( ret );
}
#endif /* MBEDTLS_SHA256_C */
int mbedtls_ssl_get_handshake_transcript( mbedtls_ssl_context *ssl,
const mbedtls_md_type_t md,
unsigned char *dst,
size_t dst_len,
size_t *olen )
{
switch( md )
{
#if defined(MBEDTLS_SHA384_C)
case MBEDTLS_MD_SHA384:
return( ssl_get_handshake_transcript_sha384( ssl, dst, dst_len, olen ) );
#endif /* MBEDTLS_SHA384_C */
#if defined(MBEDTLS_SHA256_C)
case MBEDTLS_MD_SHA256:
return( ssl_get_handshake_transcript_sha256( ssl, dst, dst_len, olen ) );
#endif /* MBEDTLS_SHA256_C */
default:
break;
}
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
#endif /* !MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
static psa_status_t setup_psa_key_derivation( psa_key_derivation_operation_t* derivation,
mbedtls_svc_key_id_t key,
psa_algorithm_t alg,
const unsigned char* seed, size_t seed_length,
const unsigned char* label, size_t label_length,
const unsigned char* other_secret,
size_t other_secret_length,
size_t capacity )
{
psa_status_t status;
status = psa_key_derivation_setup( derivation, alg );
if( status != PSA_SUCCESS )
return( status );
if( PSA_ALG_IS_TLS12_PRF( alg ) || PSA_ALG_IS_TLS12_PSK_TO_MS( alg ) )
{
status = psa_key_derivation_input_bytes( derivation,
PSA_KEY_DERIVATION_INPUT_SEED,
seed, seed_length );
if( status != PSA_SUCCESS )
return( status );
if ( other_secret != NULL )
{
status = psa_key_derivation_input_bytes( derivation,
PSA_KEY_DERIVATION_INPUT_OTHER_SECRET,
other_secret, other_secret_length );
if( status != PSA_SUCCESS )
return( status );
}
if( mbedtls_svc_key_id_is_null( key ) )
{
status = psa_key_derivation_input_bytes(
derivation, PSA_KEY_DERIVATION_INPUT_SECRET,
NULL, 0 );
}
else
{
status = psa_key_derivation_input_key(
derivation, PSA_KEY_DERIVATION_INPUT_SECRET, key );
}
if( status != PSA_SUCCESS )
return( status );
status = psa_key_derivation_input_bytes( derivation,
PSA_KEY_DERIVATION_INPUT_LABEL,
label, label_length );
if( status != PSA_SUCCESS )
return( status );
}
else
{
return( PSA_ERROR_NOT_SUPPORTED );
}
status = psa_key_derivation_set_capacity( derivation, capacity );
if( status != PSA_SUCCESS )
return( status );
return( PSA_SUCCESS );
}
static int tls_prf_generic( mbedtls_md_type_t md_type,
const unsigned char *secret, size_t slen,
const char *label,
const unsigned char *random, size_t rlen,
unsigned char *dstbuf, size_t dlen )
2013-08-21 16:14:26 +02:00
{
psa_status_t status;
psa_algorithm_t alg;
mbedtls_svc_key_id_t master_key = MBEDTLS_SVC_KEY_ID_INIT;
psa_key_derivation_operation_t derivation =
PSA_KEY_DERIVATION_OPERATION_INIT;
2013-08-21 16:14:26 +02:00
if( md_type == MBEDTLS_MD_SHA384 )
alg = PSA_ALG_TLS12_PRF(PSA_ALG_SHA_384);
else
alg = PSA_ALG_TLS12_PRF(PSA_ALG_SHA_256);
/* Normally a "secret" should be long enough to be impossible to
* find by brute force, and in particular should not be empty. But
* this PRF is also used to derive an IV, in particular in EAP-TLS,
* and for this use case it makes sense to have a 0-length "secret".
* Since the key API doesn't allow importing a key of length 0,
* keep master_key=0, which setup_psa_key_derivation() understands
* to mean a 0-length "secret" input. */
if( slen != 0 )
{
psa_key_attributes_t key_attributes = psa_key_attributes_init();
psa_set_key_usage_flags( &key_attributes, PSA_KEY_USAGE_DERIVE );
psa_set_key_algorithm( &key_attributes, alg );
psa_set_key_type( &key_attributes, PSA_KEY_TYPE_DERIVE );
status = psa_import_key( &key_attributes, secret, slen, &master_key );
if( status != PSA_SUCCESS )
return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
}
status = setup_psa_key_derivation( &derivation,
master_key, alg,
random, rlen,
(unsigned char const *) label,
(size_t) strlen( label ),
NULL, 0,
dlen );
if( status != PSA_SUCCESS )
{
psa_key_derivation_abort( &derivation );
psa_destroy_key( master_key );
return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
}
status = psa_key_derivation_output_bytes( &derivation, dstbuf, dlen );
if( status != PSA_SUCCESS )
{
psa_key_derivation_abort( &derivation );
psa_destroy_key( master_key );
return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
}
status = psa_key_derivation_abort( &derivation );
if( status != PSA_SUCCESS )
2015-06-17 14:34:48 +02:00
{
psa_destroy_key( master_key );
return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
2015-06-17 14:34:48 +02:00
}
if( ! mbedtls_svc_key_id_is_null( master_key ) )
status = psa_destroy_key( master_key );
if( status != PSA_SUCCESS )
return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
return( 0 );
2015-06-17 14:34:48 +02:00
}
#else /* MBEDTLS_USE_PSA_CRYPTO */
static int tls_prf_generic( mbedtls_md_type_t md_type,
const unsigned char *secret, size_t slen,
const char *label,
const unsigned char *random, size_t rlen,
unsigned char *dstbuf, size_t dlen )
2014-02-04 16:18:07 +01:00
{
size_t nb;
size_t i, j, k, md_len;
unsigned char *tmp;
size_t tmp_len = 0;
unsigned char h_i[MBEDTLS_MD_MAX_SIZE];
const mbedtls_md_info_t *md_info;
mbedtls_md_context_t md_ctx;
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
2014-02-04 16:18:07 +01:00
mbedtls_md_init( &md_ctx );
if( ( md_info = mbedtls_md_info_from_type( md_type ) ) == NULL )
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
md_len = mbedtls_md_get_size( md_info );
tmp_len = md_len + strlen( label ) + rlen;
tmp = mbedtls_calloc( 1, tmp_len );
if( tmp == NULL )
{
ret = MBEDTLS_ERR_SSL_ALLOC_FAILED;
goto exit;
}
2014-02-04 16:18:07 +01:00
nb = strlen( label );
memcpy( tmp + md_len, label, nb );
memcpy( tmp + md_len + nb, random, rlen );
nb += rlen;
/*
* Compute P_<hash>(secret, label + random)[0..dlen]
*/
if ( ( ret = mbedtls_md_setup( &md_ctx, md_info, 1 ) ) != 0 )
goto exit;
ret = mbedtls_md_hmac_starts( &md_ctx, secret, slen );
if( ret != 0 )
goto exit;
ret = mbedtls_md_hmac_update( &md_ctx, tmp + md_len, nb );
if( ret != 0 )
goto exit;
ret = mbedtls_md_hmac_finish( &md_ctx, tmp );
if( ret != 0 )
goto exit;
for( i = 0; i < dlen; i += md_len )
{
ret = mbedtls_md_hmac_reset ( &md_ctx );
if( ret != 0 )
goto exit;
ret = mbedtls_md_hmac_update( &md_ctx, tmp, md_len + nb );
if( ret != 0 )
goto exit;
ret = mbedtls_md_hmac_finish( &md_ctx, h_i );
if( ret != 0 )
goto exit;
ret = mbedtls_md_hmac_reset ( &md_ctx );
if( ret != 0 )
goto exit;
ret = mbedtls_md_hmac_update( &md_ctx, tmp, md_len );
if( ret != 0 )
goto exit;
ret = mbedtls_md_hmac_finish( &md_ctx, tmp );
if( ret != 0 )
goto exit;
k = ( i + md_len > dlen ) ? dlen % md_len : md_len;
for( j = 0; j < k; j++ )
dstbuf[i + j] = h_i[j];
}
exit:
mbedtls_md_free( &md_ctx );
mbedtls_platform_zeroize( tmp, tmp_len );
mbedtls_platform_zeroize( h_i, sizeof( h_i ) );
mbedtls_free( tmp );
return( ret );
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_SHA256_C)
static int tls_prf_sha256( const unsigned char *secret, size_t slen,
const char *label,
const unsigned char *random, size_t rlen,
unsigned char *dstbuf, size_t dlen )
{
return( tls_prf_generic( MBEDTLS_MD_SHA256, secret, slen,
label, random, rlen, dstbuf, dlen ) );
}
#endif /* MBEDTLS_SHA256_C */
#if defined(MBEDTLS_SHA384_C)
static int tls_prf_sha384( const unsigned char *secret, size_t slen,
const char *label,
const unsigned char *random, size_t rlen,
unsigned char *dstbuf, size_t dlen )
{
return( tls_prf_generic( MBEDTLS_MD_SHA384, secret, slen,
label, random, rlen, dstbuf, dlen ) );
}
#endif /* MBEDTLS_SHA384_C */
/*
* Set appropriate PRF function and other SSL / TLS1.2 functions
*
* Inputs:
* - hash associated with the ciphersuite (only used by TLS 1.2)
*
* Outputs:
* - the tls_prf, calc_verify and calc_finished members of handshake structure
*/
static int ssl_set_handshake_prfs( mbedtls_ssl_handshake_params *handshake,
mbedtls_md_type_t hash )
{
#if defined(MBEDTLS_SHA384_C)
if( hash == MBEDTLS_MD_SHA384 )
{
handshake->tls_prf = tls_prf_sha384;
handshake->calc_verify = ssl_calc_verify_tls_sha384;
handshake->calc_finished = ssl_calc_finished_tls_sha384;
}
else
#endif
#if defined(MBEDTLS_SHA256_C)
{
(void) hash;
handshake->tls_prf = tls_prf_sha256;
handshake->calc_verify = ssl_calc_verify_tls_sha256;
handshake->calc_finished = ssl_calc_finished_tls_sha256;
}
#else
{
(void) handshake;
(void) hash;
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
#endif
return( 0 );
}
2014-04-29 15:11:17 +02:00
#if defined(MBEDTLS_USE_PSA_CRYPTO) && \
defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED )
static int ssl_use_opaque_psk( mbedtls_ssl_context const *ssl )
{
if( ssl->conf->f_psk != NULL )
{
/* If we've used a callback to select the PSK,
* the static configuration is irrelevant. */
if( ! mbedtls_svc_key_id_is_null( ssl->handshake->psk_opaque ) )
return( 1 );
return( 0 );
}
if( ! mbedtls_svc_key_id_is_null( ssl->conf->psk_opaque ) )
return( 1 );
return( 0 );
}
#endif /* MBEDTLS_USE_PSA_CRYPTO &&
MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
/*
* Compute master secret if needed
*
* Parameters:
* [in/out] handshake
* [in] resume, premaster, extended_ms, calc_verify, tls_prf
* (PSA-PSK) ciphersuite_info, psk_opaque
* [out] premaster (cleared)
* [out] master
* [in] ssl: optionally used for debugging, EMS and PSA-PSK
* debug: conf->f_dbg, conf->p_dbg
* EMS: passed to calc_verify (debug + session_negotiate)
* PSA-PSA: conf
*/
static int ssl_compute_master( mbedtls_ssl_handshake_params *handshake,
unsigned char *master,
const mbedtls_ssl_context *ssl )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
/* cf. RFC 5246, Section 8.1:
* "The master secret is always exactly 48 bytes in length." */
size_t const master_secret_len = 48;
#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
unsigned char session_hash[48];
#endif /* MBEDTLS_SSL_EXTENDED_MASTER_SECRET */
/* The label for the KDF used for key expansion.
* This is either "master secret" or "extended master secret"
* depending on whether the Extended Master Secret extension
* is used. */
char const *lbl = "master secret";
/* The seed for the KDF used for key expansion.
* - If the Extended Master Secret extension is not used,
* this is ClientHello.Random + ServerHello.Random
* (see Sect. 8.1 in RFC 5246).
* - If the Extended Master Secret extension is used,
* this is the transcript of the handshake so far.
* (see Sect. 4 in RFC 7627). */
unsigned char const *seed = handshake->randbytes;
size_t seed_len = 64;
#if !defined(MBEDTLS_DEBUG_C) && \
!defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) && \
!(defined(MBEDTLS_USE_PSA_CRYPTO) && \
defined(MBEDTLS_KEY_EXCHANGE_PSK_ENABLED))
ssl = NULL; /* make sure we don't use it except for those cases */
(void) ssl;
#endif
if( handshake->resume != 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 3, ( "no premaster (session resumed)" ) );
return( 0 );
}
#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
if( handshake->extended_ms == MBEDTLS_SSL_EXTENDED_MS_ENABLED )
{
lbl = "extended master secret";
seed = session_hash;
handshake->calc_verify( ssl, session_hash, &seed_len );
MBEDTLS_SSL_DEBUG_BUF( 3, "session hash for extended master secret",
session_hash, seed_len );
}
#endif /* MBEDTLS_SSL_EXTENDED_MASTER_SECRET */
#if defined(MBEDTLS_USE_PSA_CRYPTO) && \
defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
if( mbedtls_ssl_ciphersuite_uses_psk( handshake->ciphersuite_info ) == 1 &&
ssl_use_opaque_psk( ssl ) == 1 )
{
/* Perform PSK-to-MS expansion in a single step. */
psa_status_t status;
psa_algorithm_t alg;
mbedtls_svc_key_id_t psk;
psa_key_derivation_operation_t derivation =
PSA_KEY_DERIVATION_OPERATION_INIT;
mbedtls_md_type_t hash_alg = handshake->ciphersuite_info->mac;
MBEDTLS_SSL_DEBUG_MSG( 2, ( "perform PSA-based PSK-to-MS expansion" ) );
psk = mbedtls_ssl_get_opaque_psk( ssl );
if( hash_alg == MBEDTLS_MD_SHA384 )
alg = PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA_384);
else
alg = PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA_256);
2017-07-20 17:17:51 +02:00
size_t other_secret_len = 0;
unsigned char* other_secret = NULL;
switch( handshake->ciphersuite_info->key_exchange )
{
/* Provide other secret.
* Other secret is stored in premaster, where first 2 bytes hold the
* length of the other key.
*/
case MBEDTLS_KEY_EXCHANGE_RSA_PSK:
/* For RSA-PSK other key length is always 48 bytes. */
other_secret_len = 48;
other_secret = handshake->premaster + 2;
break;
case MBEDTLS_KEY_EXCHANGE_ECDHE_PSK:
case MBEDTLS_KEY_EXCHANGE_DHE_PSK:
other_secret_len = MBEDTLS_GET_UINT16_BE(handshake->premaster, 0);
other_secret = handshake->premaster + 2;
break;
default:
break;
}
status = setup_psa_key_derivation( &derivation, psk, alg,
seed, seed_len,
(unsigned char const *) lbl,
(size_t) strlen( lbl ),
other_secret, other_secret_len,
master_secret_len );
if( status != PSA_SUCCESS )
{
psa_key_derivation_abort( &derivation );
return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
}
status = psa_key_derivation_output_bytes( &derivation,
master,
master_secret_len );
if( status != PSA_SUCCESS )
{
psa_key_derivation_abort( &derivation );
return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
}
2017-07-20 17:17:51 +02:00
status = psa_key_derivation_abort( &derivation );
if( status != PSA_SUCCESS )
return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
2017-07-20 17:17:51 +02:00
}
else
#endif
2017-07-20 17:17:51 +02:00
{
ret = handshake->tls_prf( handshake->premaster, handshake->pmslen,
lbl, seed, seed_len,
master,
master_secret_len );
if( ret != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "prf", ret );
return( ret );
}
2017-07-20 17:17:51 +02:00
MBEDTLS_SSL_DEBUG_BUF( 3, "premaster secret",
handshake->premaster,
handshake->pmslen );
2017-07-20 17:17:51 +02:00
mbedtls_platform_zeroize( handshake->premaster,
sizeof(handshake->premaster) );
}
2017-07-20 17:17:51 +02:00
return( 0 );
2017-07-20 17:17:51 +02:00
}
int mbedtls_ssl_derive_keys( mbedtls_ssl_context *ssl )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
const mbedtls_ssl_ciphersuite_t * const ciphersuite_info =
ssl->handshake->ciphersuite_info;
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> derive keys" ) );
/* Set PRF, calc_verify and calc_finished function pointers */
ret = ssl_set_handshake_prfs( ssl->handshake,
ciphersuite_info->mac );
if( ret != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "ssl_set_handshake_prfs", ret );
return( ret );
}
/* Compute master secret if needed */
ret = ssl_compute_master( ssl->handshake,
ssl->session_negotiate->master,
ssl );
if( ret != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "ssl_compute_master", ret );
return( ret );
}
/* Swap the client and server random values:
* - MS derivation wanted client+server (RFC 5246 8.1)
* - key derivation wants server+client (RFC 5246 6.3) */
{
unsigned char tmp[64];
memcpy( tmp, ssl->handshake->randbytes, 64 );
memcpy( ssl->handshake->randbytes, tmp + 32, 32 );
memcpy( ssl->handshake->randbytes + 32, tmp, 32 );
mbedtls_platform_zeroize( tmp, sizeof( tmp ) );
}
/* Populate transform structure */
ret = ssl_tls12_populate_transform( ssl->transform_negotiate,
ssl->session_negotiate->ciphersuite,
ssl->session_negotiate->master,
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM)
ssl->session_negotiate->encrypt_then_mac,
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM */
ssl->handshake->tls_prf,
ssl->handshake->randbytes,
ssl->tls_version,
ssl->conf->endpoint,
ssl );
if( ret != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "ssl_tls12_populate_transform", ret );
return( ret );
}
/* We no longer need Server/ClientHello.random values */
mbedtls_platform_zeroize( ssl->handshake->randbytes,
sizeof( ssl->handshake->randbytes ) );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= derive keys" ) );
return( 0 );
}
int mbedtls_ssl_set_calc_verify_md( mbedtls_ssl_context *ssl, int md )
{
switch( md )
{
#if defined(MBEDTLS_SHA384_C)
case MBEDTLS_SSL_HASH_SHA384:
ssl->handshake->calc_verify = ssl_calc_verify_tls_sha384;
break;
#endif
#if defined(MBEDTLS_SHA256_C)
case MBEDTLS_SSL_HASH_SHA256:
ssl->handshake->calc_verify = ssl_calc_verify_tls_sha256;
break;
#endif
default:
return( -1 );
}
return( 0 );
}
#if defined(MBEDTLS_SHA256_C)
void ssl_calc_verify_tls_sha256( const mbedtls_ssl_context *ssl,
unsigned char *hash,
size_t *hlen )
{
#if defined(MBEDTLS_USE_PSA_CRYPTO)
size_t hash_size;
psa_status_t status;
psa_hash_operation_t sha256_psa = psa_hash_operation_init();
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> PSA calc verify sha256" ) );
status = psa_hash_clone( &ssl->handshake->fin_sha256_psa, &sha256_psa );
if( status != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "PSA hash clone failed" ) );
return;
}
status = psa_hash_finish( &sha256_psa, hash, 32, &hash_size );
if( status != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "PSA hash finish failed" ) );
return;
}
*hlen = 32;
MBEDTLS_SSL_DEBUG_BUF( 3, "PSA calculated verify result", hash, *hlen );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= PSA calc verify" ) );
#else
mbedtls_sha256_context sha256;
mbedtls_sha256_init( &sha256 );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> calc verify sha256" ) );
mbedtls_sha256_clone( &sha256, &ssl->handshake->fin_sha256 );
mbedtls_sha256_finish( &sha256, hash );
*hlen = 32;
MBEDTLS_SSL_DEBUG_BUF( 3, "calculated verify result", hash, *hlen );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= calc verify" ) );
mbedtls_sha256_free( &sha256 );
#endif /* MBEDTLS_USE_PSA_CRYPTO */
return;
}
#endif /* MBEDTLS_SHA256_C */
#if defined(MBEDTLS_SHA384_C)
void ssl_calc_verify_tls_sha384( const mbedtls_ssl_context *ssl,
unsigned char *hash,
size_t *hlen )
{
#if defined(MBEDTLS_USE_PSA_CRYPTO)
size_t hash_size;
psa_status_t status;
psa_hash_operation_t sha384_psa = psa_hash_operation_init();
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> PSA calc verify sha384" ) );
status = psa_hash_clone( &ssl->handshake->fin_sha384_psa, &sha384_psa );
if( status != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "PSA hash clone failed" ) );
return;
}
status = psa_hash_finish( &sha384_psa, hash, 48, &hash_size );
if( status != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "PSA hash finish failed" ) );
return;
}
*hlen = 48;
MBEDTLS_SSL_DEBUG_BUF( 3, "PSA calculated verify result", hash, *hlen );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= PSA calc verify" ) );
#else
mbedtls_sha512_context sha512;
mbedtls_sha512_init( &sha512 );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> calc verify sha384" ) );
mbedtls_sha512_clone( &sha512, &ssl->handshake->fin_sha512 );
mbedtls_sha512_finish( &sha512, hash );
*hlen = 48;
MBEDTLS_SSL_DEBUG_BUF( 3, "calculated verify result", hash, *hlen );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= calc verify" ) );
mbedtls_sha512_free( &sha512 );
#endif /* MBEDTLS_USE_PSA_CRYPTO */
return;
}
#endif /* MBEDTLS_SHA384_C */
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
int mbedtls_ssl_psk_derive_premaster( mbedtls_ssl_context *ssl, mbedtls_key_exchange_type_t key_ex )
{
unsigned char *p = ssl->handshake->premaster;
unsigned char *end = p + sizeof( ssl->handshake->premaster );
const unsigned char *psk = NULL;
size_t psk_len = 0;
int psk_ret = mbedtls_ssl_get_psk( ssl, &psk, &psk_len );
#if defined(MBEDTLS_USE_PSA_CRYPTO) && \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED)
(void) key_ex;
#endif /* MBEDTLS_USE_PSA_CRYPTO && MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED */
if( psk_ret == MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED )
{
/*
* This should never happen because the existence of a PSK is always
* checked before calling this function.
*
* The exception is opaque DHE-PSK. For DHE-PSK fill premaster with
* the shared secret without PSK.
*/
if ( key_ex != MBEDTLS_KEY_EXCHANGE_DHE_PSK )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
}
/*
* PMS = struct {
* opaque other_secret<0..2^16-1>;
* opaque psk<0..2^16-1>;
* };
* with "other_secret" depending on the particular key exchange
*/
#if defined(MBEDTLS_KEY_EXCHANGE_PSK_ENABLED)
if( key_ex == MBEDTLS_KEY_EXCHANGE_PSK )
{
if( end - p < 2 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
MBEDTLS_PUT_UINT16_BE( psk_len, p, 0 );
p += 2;
if( end < p || (size_t)( end - p ) < psk_len )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
memset( p, 0, psk_len );
p += psk_len;
}
else
#endif /* MBEDTLS_KEY_EXCHANGE_PSK_ENABLED */
#if defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED)
if( key_ex == MBEDTLS_KEY_EXCHANGE_RSA_PSK )
{
/*
* other_secret already set by the ClientKeyExchange message,
* and is 48 bytes long
*/
if( end - p < 2 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
*p++ = 0;
*p++ = 48;
p += 48;
}
else
#endif /* MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED */
#if defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED)
if( key_ex == MBEDTLS_KEY_EXCHANGE_DHE_PSK )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
size_t len;
/* Write length only when we know the actual value */
if( ( ret = mbedtls_dhm_calc_secret( &ssl->handshake->dhm_ctx,
p + 2, end - ( p + 2 ), &len,
ssl->conf->f_rng, ssl->conf->p_rng ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_dhm_calc_secret", ret );
return( ret );
}
MBEDTLS_PUT_UINT16_BE( len, p, 0 );
p += 2 + len;
MBEDTLS_SSL_DEBUG_MPI( 3, "DHM: K ", &ssl->handshake->dhm_ctx.K );
/* For opaque PSK fill premaster with the the shared secret without PSK. */
if( psk_ret == MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED )
{
MBEDTLS_SSL_DEBUG_MSG( 1,
( "skip PMS generation for opaque DHE-PSK" ) );
return( 0 );
}
}
else
#endif /* MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED */
#if !defined(MBEDTLS_USE_PSA_CRYPTO) && \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED)
if( key_ex == MBEDTLS_KEY_EXCHANGE_ECDHE_PSK )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
size_t zlen;
if( ( ret = mbedtls_ecdh_calc_secret( &ssl->handshake->ecdh_ctx, &zlen,
p + 2, end - ( p + 2 ),
ssl->conf->f_rng, ssl->conf->p_rng ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ecdh_calc_secret", ret );
return( ret );
}
MBEDTLS_PUT_UINT16_BE( zlen, p, 0 );
p += 2 + zlen;
MBEDTLS_SSL_DEBUG_ECDH( 3, &ssl->handshake->ecdh_ctx,
MBEDTLS_DEBUG_ECDH_Z );
}
else
#endif /* !MBEDTLS_USE_PSA_CRYPTO && MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED */
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
/* opaque psk<0..2^16-1>; */
if( end - p < 2 )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
MBEDTLS_PUT_UINT16_BE( psk_len, p, 0 );
p += 2;
if( end < p || (size_t)( end - p ) < psk_len )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
memcpy( p, psk, psk_len );
p += psk_len;
ssl->handshake->pmslen = p - ssl->handshake->premaster;
return( 0 );
}
#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
#if defined(MBEDTLS_SSL_SRV_C) && defined(MBEDTLS_SSL_RENEGOTIATION)
static int ssl_write_hello_request( mbedtls_ssl_context *ssl );
#if defined(MBEDTLS_SSL_PROTO_DTLS)
int mbedtls_ssl_resend_hello_request( mbedtls_ssl_context *ssl )
{
/* If renegotiation is not enforced, retransmit until we would reach max
* timeout if we were using the usual handshake doubling scheme */
if( ssl->conf->renego_max_records < 0 )
{
uint32_t ratio = ssl->conf->hs_timeout_max / ssl->conf->hs_timeout_min + 1;
unsigned char doublings = 1;
while( ratio != 0 )
{
++doublings;
ratio >>= 1;
}
if( ++ssl->renego_records_seen > doublings )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "no longer retransmitting hello request" ) );
return( 0 );
}
}
return( ssl_write_hello_request( ssl ) );
}
#endif
#endif /* MBEDTLS_SSL_SRV_C && MBEDTLS_SSL_RENEGOTIATION */
/*
* Handshake functions
*/
#if !defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
/* No certificate support -> dummy functions */
int mbedtls_ssl_write_certificate( mbedtls_ssl_context *ssl )
{
const mbedtls_ssl_ciphersuite_t *ciphersuite_info =
ssl->handshake->ciphersuite_info;
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write certificate" ) );
if( !mbedtls_ssl_ciphersuite_uses_srv_cert( ciphersuite_info ) )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip write certificate" ) );
ssl->state++;
return( 0 );
}
MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
int mbedtls_ssl_parse_certificate( mbedtls_ssl_context *ssl )
{
const mbedtls_ssl_ciphersuite_t *ciphersuite_info =
ssl->handshake->ciphersuite_info;
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> parse certificate" ) );
if( !mbedtls_ssl_ciphersuite_uses_srv_cert( ciphersuite_info ) )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip parse certificate" ) );
ssl->state++;
return( 0 );
}
MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
#else /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
/* Some certificate support -> implement write and parse */
int mbedtls_ssl_write_certificate( mbedtls_ssl_context *ssl )
{
int ret = MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE;
size_t i, n;
const mbedtls_x509_crt *crt;
const mbedtls_ssl_ciphersuite_t *ciphersuite_info =
ssl->handshake->ciphersuite_info;
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write certificate" ) );
if( !mbedtls_ssl_ciphersuite_uses_srv_cert( ciphersuite_info ) )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip write certificate" ) );
ssl->state++;
return( 0 );
}
#if defined(MBEDTLS_SSL_CLI_C)
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT )
{
if( ssl->handshake->client_auth == 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip write certificate" ) );
ssl->state++;
return( 0 );
}
}
#endif /* MBEDTLS_SSL_CLI_C */
#if defined(MBEDTLS_SSL_SRV_C)
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
{
if( mbedtls_ssl_own_cert( ssl ) == NULL )
{
/* Should never happen because we shouldn't have picked the
* ciphersuite if we don't have a certificate. */
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
}
#endif
MBEDTLS_SSL_DEBUG_CRT( 3, "own certificate", mbedtls_ssl_own_cert( ssl ) );
/*
* 0 . 0 handshake type
* 1 . 3 handshake length
* 4 . 6 length of all certs
* 7 . 9 length of cert. 1
* 10 . n-1 peer certificate
* n . n+2 length of cert. 2
* n+3 . ... upper level cert, etc.
*/
i = 7;
crt = mbedtls_ssl_own_cert( ssl );
while( crt != NULL )
{
n = crt->raw.len;
if( n > MBEDTLS_SSL_OUT_CONTENT_LEN - 3 - i )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "certificate too large, %" MBEDTLS_PRINTF_SIZET
" > %" MBEDTLS_PRINTF_SIZET,
i + 3 + n, (size_t) MBEDTLS_SSL_OUT_CONTENT_LEN ) );
return( MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL );
}
ssl->out_msg[i ] = MBEDTLS_BYTE_2( n );
ssl->out_msg[i + 1] = MBEDTLS_BYTE_1( n );
ssl->out_msg[i + 2] = MBEDTLS_BYTE_0( n );
i += 3; memcpy( ssl->out_msg + i, crt->raw.p, n );
i += n; crt = crt->next;
}
ssl->out_msg[4] = MBEDTLS_BYTE_2( i - 7 );
ssl->out_msg[5] = MBEDTLS_BYTE_1( i - 7 );
ssl->out_msg[6] = MBEDTLS_BYTE_0( i - 7 );
ssl->out_msglen = i;
ssl->out_msgtype = MBEDTLS_SSL_MSG_HANDSHAKE;
ssl->out_msg[0] = MBEDTLS_SSL_HS_CERTIFICATE;
ssl->state++;
if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write certificate" ) );
return( ret );
}
#if defined(MBEDTLS_SSL_RENEGOTIATION) && defined(MBEDTLS_SSL_CLI_C)
#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
static int ssl_check_peer_crt_unchanged( mbedtls_ssl_context *ssl,
unsigned char *crt_buf,
size_t crt_buf_len )
{
mbedtls_x509_crt const * const peer_crt = ssl->session->peer_cert;
if( peer_crt == NULL )
return( -1 );
if( peer_crt->raw.len != crt_buf_len )
return( -1 );
return( memcmp( peer_crt->raw.p, crt_buf, peer_crt->raw.len ) );
}
#else /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
static int ssl_check_peer_crt_unchanged( mbedtls_ssl_context *ssl,
unsigned char *crt_buf,
size_t crt_buf_len )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
unsigned char const * const peer_cert_digest =
ssl->session->peer_cert_digest;
mbedtls_md_type_t const peer_cert_digest_type =
ssl->session->peer_cert_digest_type;
mbedtls_md_info_t const * const digest_info =
mbedtls_md_info_from_type( peer_cert_digest_type );
unsigned char tmp_digest[MBEDTLS_SSL_PEER_CERT_DIGEST_MAX_LEN];
size_t digest_len;
if( peer_cert_digest == NULL || digest_info == NULL )
return( -1 );
digest_len = mbedtls_md_get_size( digest_info );
if( digest_len > MBEDTLS_SSL_PEER_CERT_DIGEST_MAX_LEN )
return( -1 );
ret = mbedtls_md( digest_info, crt_buf, crt_buf_len, tmp_digest );
if( ret != 0 )
return( -1 );
return( memcmp( tmp_digest, peer_cert_digest, digest_len ) );
}
#endif /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
#endif /* MBEDTLS_SSL_RENEGOTIATION && MBEDTLS_SSL_CLI_C */
/*
* Once the certificate message is read, parse it into a cert chain and
* perform basic checks, but leave actual verification to the caller
*/
static int ssl_parse_certificate_chain( mbedtls_ssl_context *ssl,
mbedtls_x509_crt *chain )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
#if defined(MBEDTLS_SSL_RENEGOTIATION) && defined(MBEDTLS_SSL_CLI_C)
int crt_cnt=0;
#endif
size_t i, n;
uint8_t alert;
if( ssl->in_msgtype != MBEDTLS_SSL_MSG_HANDSHAKE )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad certificate message" ) );
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_UNEXPECTED_MESSAGE );
return( MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE );
}
if( ssl->in_msg[0] != MBEDTLS_SSL_HS_CERTIFICATE )
{
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_UNEXPECTED_MESSAGE );
return( MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE );
}
if( ssl->in_hslen < mbedtls_ssl_hs_hdr_len( ssl ) + 3 + 3 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad certificate message" ) );
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR );
return( MBEDTLS_ERR_SSL_DECODE_ERROR );
}
i = mbedtls_ssl_hs_hdr_len( ssl );
/*
* Same message structure as in mbedtls_ssl_write_certificate()
*/
n = ( ssl->in_msg[i+1] << 8 ) | ssl->in_msg[i+2];
if( ssl->in_msg[i] != 0 ||
ssl->in_hslen != n + 3 + mbedtls_ssl_hs_hdr_len( ssl ) )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad certificate message" ) );
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR );
return( MBEDTLS_ERR_SSL_DECODE_ERROR );
}
/* Make &ssl->in_msg[i] point to the beginning of the CRT chain. */
i += 3;
/* Iterate through and parse the CRTs in the provided chain. */
while( i < ssl->in_hslen )
{
/* Check that there's room for the next CRT's length fields. */
if ( i + 3 > ssl->in_hslen ) {
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad certificate message" ) );
mbedtls_ssl_send_alert_message( ssl,
MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR );
return( MBEDTLS_ERR_SSL_DECODE_ERROR );
}
/* In theory, the CRT can be up to 2**24 Bytes, but we don't support
* anything beyond 2**16 ~ 64K. */
if( ssl->in_msg[i] != 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad certificate message" ) );
mbedtls_ssl_send_alert_message( ssl,
MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT );
return( MBEDTLS_ERR_SSL_BAD_CERTIFICATE );
}
/* Read length of the next CRT in the chain. */
n = ( (unsigned int) ssl->in_msg[i + 1] << 8 )
| (unsigned int) ssl->in_msg[i + 2];
i += 3;
if( n < 128 || i + n > ssl->in_hslen )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad certificate message" ) );
mbedtls_ssl_send_alert_message( ssl,
MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR );
return( MBEDTLS_ERR_SSL_DECODE_ERROR );
}
/* Check if we're handling the first CRT in the chain. */
#if defined(MBEDTLS_SSL_RENEGOTIATION) && defined(MBEDTLS_SSL_CLI_C)
if( crt_cnt++ == 0 &&
ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT &&
ssl->renego_status == MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS )
{
/* During client-side renegotiation, check that the server's
* end-CRTs hasn't changed compared to the initial handshake,
* mitigating the triple handshake attack. On success, reuse
* the original end-CRT instead of parsing it again. */
MBEDTLS_SSL_DEBUG_MSG( 3, ( "Check that peer CRT hasn't changed during renegotiation" ) );
if( ssl_check_peer_crt_unchanged( ssl,
&ssl->in_msg[i],
n ) != 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "new server cert during renegotiation" ) );
mbedtls_ssl_send_alert_message( ssl,
MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_ACCESS_DENIED );
return( MBEDTLS_ERR_SSL_BAD_CERTIFICATE );
}
/* Now we can safely free the original chain. */
ssl_clear_peer_cert( ssl->session );
}
#endif /* MBEDTLS_SSL_RENEGOTIATION && MBEDTLS_SSL_CLI_C */
/* Parse the next certificate in the chain. */
#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
ret = mbedtls_x509_crt_parse_der( chain, ssl->in_msg + i, n );
#else
/* If we don't need to store the CRT chain permanently, parse
* it in-place from the input buffer instead of making a copy. */
ret = mbedtls_x509_crt_parse_der_nocopy( chain, ssl->in_msg + i, n );
#endif /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
switch( ret )
{
case 0: /*ok*/
case MBEDTLS_ERR_X509_UNKNOWN_SIG_ALG + MBEDTLS_ERR_OID_NOT_FOUND:
/* Ignore certificate with an unknown algorithm: maybe a
prior certificate was already trusted. */
break;
case MBEDTLS_ERR_X509_ALLOC_FAILED:
alert = MBEDTLS_SSL_ALERT_MSG_INTERNAL_ERROR;
goto crt_parse_der_failed;
case MBEDTLS_ERR_X509_UNKNOWN_VERSION:
alert = MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT;
goto crt_parse_der_failed;
default:
alert = MBEDTLS_SSL_ALERT_MSG_BAD_CERT;
crt_parse_der_failed:
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL, alert );
MBEDTLS_SSL_DEBUG_RET( 1, " mbedtls_x509_crt_parse_der", ret );
return( ret );
}
i += n;
}
MBEDTLS_SSL_DEBUG_CRT( 3, "peer certificate", chain );
return( 0 );
}
#if defined(MBEDTLS_SSL_SRV_C)
static int ssl_srv_check_client_no_crt_notification( mbedtls_ssl_context *ssl )
{
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT )
return( -1 );
if( ssl->in_hslen == 3 + mbedtls_ssl_hs_hdr_len( ssl ) &&
ssl->in_msgtype == MBEDTLS_SSL_MSG_HANDSHAKE &&
ssl->in_msg[0] == MBEDTLS_SSL_HS_CERTIFICATE &&
memcmp( ssl->in_msg + mbedtls_ssl_hs_hdr_len( ssl ), "\0\0\0", 3 ) == 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "TLSv1 client has no certificate" ) );
return( 0 );
}
return( -1 );
}
#endif /* MBEDTLS_SSL_SRV_C */
/* Check if a certificate message is expected.
* Return either
* - SSL_CERTIFICATE_EXPECTED, or
* - SSL_CERTIFICATE_SKIP
* indicating whether a Certificate message is expected or not.
*/
#define SSL_CERTIFICATE_EXPECTED 0
#define SSL_CERTIFICATE_SKIP 1
static int ssl_parse_certificate_coordinate( mbedtls_ssl_context *ssl,
int authmode )
{
const mbedtls_ssl_ciphersuite_t *ciphersuite_info =
ssl->handshake->ciphersuite_info;
if( !mbedtls_ssl_ciphersuite_uses_srv_cert( ciphersuite_info ) )
return( SSL_CERTIFICATE_SKIP );
#if defined(MBEDTLS_SSL_SRV_C)
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
{
if( ciphersuite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_RSA_PSK )
return( SSL_CERTIFICATE_SKIP );
if( authmode == MBEDTLS_SSL_VERIFY_NONE )
{
ssl->session_negotiate->verify_result =
MBEDTLS_X509_BADCERT_SKIP_VERIFY;
return( SSL_CERTIFICATE_SKIP );
}
}
#else
((void) authmode);
#endif /* MBEDTLS_SSL_SRV_C */
return( SSL_CERTIFICATE_EXPECTED );
}
static int ssl_parse_certificate_verify( mbedtls_ssl_context *ssl,
int authmode,
mbedtls_x509_crt *chain,
void *rs_ctx )
{
int ret = 0;
const mbedtls_ssl_ciphersuite_t *ciphersuite_info =
ssl->handshake->ciphersuite_info;
int have_ca_chain = 0;
int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *);
void *p_vrfy;
if( authmode == MBEDTLS_SSL_VERIFY_NONE )
return( 0 );
if( ssl->f_vrfy != NULL )
{
MBEDTLS_SSL_DEBUG_MSG( 3, ( "Use context-specific verification callback" ) );
f_vrfy = ssl->f_vrfy;
p_vrfy = ssl->p_vrfy;
}
else
{
MBEDTLS_SSL_DEBUG_MSG( 3, ( "Use configuration-specific verification callback" ) );
f_vrfy = ssl->conf->f_vrfy;
p_vrfy = ssl->conf->p_vrfy;
}
/*
* Main check: verify certificate
*/
#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK)
if( ssl->conf->f_ca_cb != NULL )
{
((void) rs_ctx);
have_ca_chain = 1;
MBEDTLS_SSL_DEBUG_MSG( 3, ( "use CA callback for X.509 CRT verification" ) );
ret = mbedtls_x509_crt_verify_with_ca_cb(
chain,
ssl->conf->f_ca_cb,
ssl->conf->p_ca_cb,
ssl->conf->cert_profile,
ssl->hostname,
&ssl->session_negotiate->verify_result,
f_vrfy, p_vrfy );
}
else
#endif /* MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK */
{
mbedtls_x509_crt *ca_chain;
mbedtls_x509_crl *ca_crl;
#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
if( ssl->handshake->sni_ca_chain != NULL )
{
ca_chain = ssl->handshake->sni_ca_chain;
ca_crl = ssl->handshake->sni_ca_crl;
}
else
#endif
{
ca_chain = ssl->conf->ca_chain;
ca_crl = ssl->conf->ca_crl;
}
if( ca_chain != NULL )
have_ca_chain = 1;
ret = mbedtls_x509_crt_verify_restartable(
chain,
ca_chain, ca_crl,
ssl->conf->cert_profile,
ssl->hostname,
&ssl->session_negotiate->verify_result,
f_vrfy, p_vrfy, rs_ctx );
}
if( ret != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "x509_verify_cert", ret );
}
#if defined(MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED)
if( ret == MBEDTLS_ERR_ECP_IN_PROGRESS )
return( MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS );
#endif
/*
* Secondary checks: always done, but change 'ret' only if it was 0
*/
#if defined(MBEDTLS_ECP_C)
{
const mbedtls_pk_context *pk = &chain->pk;
/* If certificate uses an EC key, make sure the curve is OK */
if( mbedtls_pk_can_do( pk, MBEDTLS_PK_ECKEY ) &&
mbedtls_ssl_check_curve( ssl, mbedtls_pk_ec( *pk )->grp.id ) != 0 )
{
ssl->session_negotiate->verify_result |= MBEDTLS_X509_BADCERT_BAD_KEY;
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad certificate (EC key curve)" ) );
if( ret == 0 )
ret = MBEDTLS_ERR_SSL_BAD_CERTIFICATE;
}
}
#endif /* MBEDTLS_ECP_C */
if( mbedtls_ssl_check_cert_usage( chain,
ciphersuite_info,
! ssl->conf->endpoint,
&ssl->session_negotiate->verify_result ) != 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad certificate (usage extensions)" ) );
if( ret == 0 )
ret = MBEDTLS_ERR_SSL_BAD_CERTIFICATE;
}
/* mbedtls_x509_crt_verify_with_profile is supposed to report a
* verification failure through MBEDTLS_ERR_X509_CERT_VERIFY_FAILED,
* with details encoded in the verification flags. All other kinds
* of error codes, including those from the user provided f_vrfy
* functions, are treated as fatal and lead to a failure of
* ssl_parse_certificate even if verification was optional. */
if( authmode == MBEDTLS_SSL_VERIFY_OPTIONAL &&
( ret == MBEDTLS_ERR_X509_CERT_VERIFY_FAILED ||
ret == MBEDTLS_ERR_SSL_BAD_CERTIFICATE ) )
{
ret = 0;
}
if( have_ca_chain == 0 && authmode == MBEDTLS_SSL_VERIFY_REQUIRED )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "got no CA chain" ) );
ret = MBEDTLS_ERR_SSL_CA_CHAIN_REQUIRED;
}
if( ret != 0 )
{
uint8_t alert;
/* The certificate may have been rejected for several reasons.
Pick one and send the corresponding alert. Which alert to send
may be a subject of debate in some cases. */
if( ssl->session_negotiate->verify_result & MBEDTLS_X509_BADCERT_OTHER )
alert = MBEDTLS_SSL_ALERT_MSG_ACCESS_DENIED;
else if( ssl->session_negotiate->verify_result & MBEDTLS_X509_BADCERT_CN_MISMATCH )
alert = MBEDTLS_SSL_ALERT_MSG_BAD_CERT;
else if( ssl->session_negotiate->verify_result & MBEDTLS_X509_BADCERT_KEY_USAGE )
alert = MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT;
else if( ssl->session_negotiate->verify_result & MBEDTLS_X509_BADCERT_EXT_KEY_USAGE )
alert = MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT;
else if( ssl->session_negotiate->verify_result & MBEDTLS_X509_BADCERT_NS_CERT_TYPE )
alert = MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT;
else if( ssl->session_negotiate->verify_result & MBEDTLS_X509_BADCERT_BAD_PK )
alert = MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT;
else if( ssl->session_negotiate->verify_result & MBEDTLS_X509_BADCERT_BAD_KEY )
alert = MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT;
else if( ssl->session_negotiate->verify_result & MBEDTLS_X509_BADCERT_EXPIRED )
alert = MBEDTLS_SSL_ALERT_MSG_CERT_EXPIRED;
else if( ssl->session_negotiate->verify_result & MBEDTLS_X509_BADCERT_REVOKED )
alert = MBEDTLS_SSL_ALERT_MSG_CERT_REVOKED;
else if( ssl->session_negotiate->verify_result & MBEDTLS_X509_BADCERT_NOT_TRUSTED )
alert = MBEDTLS_SSL_ALERT_MSG_UNKNOWN_CA;
else
alert = MBEDTLS_SSL_ALERT_MSG_CERT_UNKNOWN;
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
alert );
}
#if defined(MBEDTLS_DEBUG_C)
if( ssl->session_negotiate->verify_result != 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 3, ( "! Certificate verification flags %08x",
(unsigned int) ssl->session_negotiate->verify_result ) );
}
else
{
MBEDTLS_SSL_DEBUG_MSG( 3, ( "Certificate verification flags clear" ) );
}
#endif /* MBEDTLS_DEBUG_C */
return( ret );
}
#if !defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
static int ssl_remember_peer_crt_digest( mbedtls_ssl_context *ssl,
unsigned char *start, size_t len )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
/* Remember digest of the peer's end-CRT. */
ssl->session_negotiate->peer_cert_digest =
mbedtls_calloc( 1, MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_LEN );
if( ssl->session_negotiate->peer_cert_digest == NULL )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "alloc(%d bytes) failed",
MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_LEN ) );
mbedtls_ssl_send_alert_message( ssl,
MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_INTERNAL_ERROR );
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
}
ret = mbedtls_md( mbedtls_md_info_from_type(
MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_TYPE ),
start, len,
ssl->session_negotiate->peer_cert_digest );
ssl->session_negotiate->peer_cert_digest_type =
MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_TYPE;
ssl->session_negotiate->peer_cert_digest_len =
MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_LEN;
return( ret );
}
static int ssl_remember_peer_pubkey( mbedtls_ssl_context *ssl,
unsigned char *start, size_t len )
{
unsigned char *end = start + len;
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
/* Make a copy of the peer's raw public key. */
mbedtls_pk_init( &ssl->handshake->peer_pubkey );
ret = mbedtls_pk_parse_subpubkey( &start, end,
&ssl->handshake->peer_pubkey );
if( ret != 0 )
{
/* We should have parsed the public key before. */
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
return( 0 );
}
#endif /* !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
int mbedtls_ssl_parse_certificate( mbedtls_ssl_context *ssl )
{
int ret = 0;
int crt_expected;
#if defined(MBEDTLS_SSL_SRV_C) && defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
const int authmode = ssl->handshake->sni_authmode != MBEDTLS_SSL_VERIFY_UNSET
? ssl->handshake->sni_authmode
: ssl->conf->authmode;
#else
const int authmode = ssl->conf->authmode;
#endif
void *rs_ctx = NULL;
mbedtls_x509_crt *chain = NULL;
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> parse certificate" ) );
crt_expected = ssl_parse_certificate_coordinate( ssl, authmode );
if( crt_expected == SSL_CERTIFICATE_SKIP )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= skip parse certificate" ) );
goto exit;
}
#if defined(MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED)
if( ssl->handshake->ecrs_enabled &&
ssl->handshake->ecrs_state == ssl_ecrs_crt_verify )
{
chain = ssl->handshake->ecrs_peer_cert;
ssl->handshake->ecrs_peer_cert = NULL;
goto crt_verify;
}
#endif
if( ( ret = mbedtls_ssl_read_record( ssl, 1 ) ) != 0 )
{
/* mbedtls_ssl_read_record may have sent an alert already. We
let it decide whether to alert. */
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_read_record", ret );
goto exit;
}
#if defined(MBEDTLS_SSL_SRV_C)
if( ssl_srv_check_client_no_crt_notification( ssl ) == 0 )
{
ssl->session_negotiate->verify_result = MBEDTLS_X509_BADCERT_MISSING;
if( authmode != MBEDTLS_SSL_VERIFY_OPTIONAL )
ret = MBEDTLS_ERR_SSL_NO_CLIENT_CERTIFICATE;
goto exit;
}
#endif /* MBEDTLS_SSL_SRV_C */
/* Clear existing peer CRT structure in case we tried to
* reuse a session but it failed, and allocate a new one. */
ssl_clear_peer_cert( ssl->session_negotiate );
chain = mbedtls_calloc( 1, sizeof( mbedtls_x509_crt ) );
if( chain == NULL )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "alloc(%" MBEDTLS_PRINTF_SIZET " bytes) failed",
sizeof( mbedtls_x509_crt ) ) );
mbedtls_ssl_send_alert_message( ssl,
MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_INTERNAL_ERROR );
ret = MBEDTLS_ERR_SSL_ALLOC_FAILED;
goto exit;
}
mbedtls_x509_crt_init( chain );
ret = ssl_parse_certificate_chain( ssl, chain );
if( ret != 0 )
goto exit;
#if defined(MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED)
if( ssl->handshake->ecrs_enabled)
ssl->handshake->ecrs_state = ssl_ecrs_crt_verify;
crt_verify:
if( ssl->handshake->ecrs_enabled)
rs_ctx = &ssl->handshake->ecrs_ctx;
#endif
ret = ssl_parse_certificate_verify( ssl, authmode,
chain, rs_ctx );
if( ret != 0 )
goto exit;
#if !defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
{
unsigned char *crt_start, *pk_start;
size_t crt_len, pk_len;
/* We parse the CRT chain without copying, so
* these pointers point into the input buffer,
* and are hence still valid after freeing the
* CRT chain. */
crt_start = chain->raw.p;
crt_len = chain->raw.len;
pk_start = chain->pk_raw.p;
pk_len = chain->pk_raw.len;
/* Free the CRT structures before computing
* digest and copying the peer's public key. */
mbedtls_x509_crt_free( chain );
mbedtls_free( chain );
chain = NULL;
ret = ssl_remember_peer_crt_digest( ssl, crt_start, crt_len );
if( ret != 0 )
goto exit;
ret = ssl_remember_peer_pubkey( ssl, pk_start, pk_len );
if( ret != 0 )
goto exit;
}
#else /* !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
/* Pass ownership to session structure. */
ssl->session_negotiate->peer_cert = chain;
chain = NULL;
#endif /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= parse certificate" ) );
exit:
if( ret == 0 )
ssl->state++;
#if defined(MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED)
if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
{
ssl->handshake->ecrs_peer_cert = chain;
chain = NULL;
}
#endif
if( chain != NULL )
{
mbedtls_x509_crt_free( chain );
mbedtls_free( chain );
}
return( ret );
}
#endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
#if defined(MBEDTLS_SHA256_C)
static void ssl_calc_finished_tls_sha256(
mbedtls_ssl_context *ssl, unsigned char *buf, int from )
{
int len = 12;
const char *sender;
unsigned char padbuf[32];
#if defined(MBEDTLS_USE_PSA_CRYPTO)
size_t hash_size;
psa_hash_operation_t sha256_psa = PSA_HASH_OPERATION_INIT;
psa_status_t status;
#else
mbedtls_sha256_context sha256;
#endif
mbedtls_ssl_session *session = ssl->session_negotiate;
if( !session )
session = ssl->session;
sender = ( from == MBEDTLS_SSL_IS_CLIENT )
? "client finished"
: "server finished";
#if defined(MBEDTLS_USE_PSA_CRYPTO)
sha256_psa = psa_hash_operation_init();
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> calc PSA finished tls sha256" ) );
status = psa_hash_clone( &ssl->handshake->fin_sha256_psa, &sha256_psa );
if( status != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "PSA hash clone failed" ) );
return;
}
status = psa_hash_finish( &sha256_psa, padbuf, sizeof( padbuf ), &hash_size );
if( status != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "PSA hash finish failed" ) );
return;
}
MBEDTLS_SSL_DEBUG_BUF( 3, "PSA calculated padbuf", padbuf, 32 );
#else
mbedtls_sha256_init( &sha256 );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> calc finished tls sha256" ) );
mbedtls_sha256_clone( &sha256, &ssl->handshake->fin_sha256 );
/*
* TLSv1.2:
* hash = PRF( master, finished_label,
* Hash( handshake ) )[0.11]
*/
#if !defined(MBEDTLS_SHA256_ALT)
MBEDTLS_SSL_DEBUG_BUF( 4, "finished sha2 state", (unsigned char *)
sha256.state, sizeof( sha256.state ) );
#endif
mbedtls_sha256_finish( &sha256, padbuf );
mbedtls_sha256_free( &sha256 );
#endif /* MBEDTLS_USE_PSA_CRYPTO */
ssl->handshake->tls_prf( session->master, 48, sender,
padbuf, 32, buf, len );
MBEDTLS_SSL_DEBUG_BUF( 3, "calc finished result", buf, len );
mbedtls_platform_zeroize( padbuf, sizeof( padbuf ) );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= calc finished" ) );
}
#endif /* MBEDTLS_SHA256_C */
#if defined(MBEDTLS_SHA384_C)
static void ssl_calc_finished_tls_sha384(
mbedtls_ssl_context *ssl, unsigned char *buf, int from )
{
int len = 12;
const char *sender;
unsigned char padbuf[48];
#if defined(MBEDTLS_USE_PSA_CRYPTO)
size_t hash_size;
psa_hash_operation_t sha384_psa = PSA_HASH_OPERATION_INIT;
psa_status_t status;
#else
mbedtls_sha512_context sha512;
#endif
mbedtls_ssl_session *session = ssl->session_negotiate;
if( !session )
session = ssl->session;
sender = ( from == MBEDTLS_SSL_IS_CLIENT )
? "client finished"
: "server finished";
#if defined(MBEDTLS_USE_PSA_CRYPTO)
sha384_psa = psa_hash_operation_init();
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> calc PSA finished tls sha384" ) );
status = psa_hash_clone( &ssl->handshake->fin_sha384_psa, &sha384_psa );
if( status != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "PSA hash clone failed" ) );
return;
}
status = psa_hash_finish( &sha384_psa, padbuf, sizeof( padbuf ), &hash_size );
if( status != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_MSG( 2, ( "PSA hash finish failed" ) );
return;
}
MBEDTLS_SSL_DEBUG_BUF( 3, "PSA calculated padbuf", padbuf, 48 );
#else
mbedtls_sha512_init( &sha512 );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> calc finished tls sha384" ) );
mbedtls_sha512_clone( &sha512, &ssl->handshake->fin_sha512 );
/*
* TLSv1.2:
* hash = PRF( master, finished_label,
* Hash( handshake ) )[0.11]
*/
#if !defined(MBEDTLS_SHA512_ALT)
MBEDTLS_SSL_DEBUG_BUF( 4, "finished sha512 state", (unsigned char *)
sha512.state, sizeof( sha512.state ) );
#endif
mbedtls_sha512_finish( &sha512, padbuf );
mbedtls_sha512_free( &sha512 );
#endif
ssl->handshake->tls_prf( session->master, 48, sender,
padbuf, 48, buf, len );
MBEDTLS_SSL_DEBUG_BUF( 3, "calc finished result", buf, len );
mbedtls_platform_zeroize( padbuf, sizeof( padbuf ) );
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= calc finished" ) );
}
#endif /* MBEDTLS_SHA384_C */
void mbedtls_ssl_handshake_wrapup_free_hs_transform( mbedtls_ssl_context *ssl )
{
MBEDTLS_SSL_DEBUG_MSG( 3, ( "=> handshake wrapup: final free" ) );
/*
* Free our handshake params
*/
mbedtls_ssl_handshake_free( ssl );
mbedtls_free( ssl->handshake );
ssl->handshake = NULL;
/*
* Free the previous transform and swith in the current one
*/
if( ssl->transform )
{
mbedtls_ssl_transform_free( ssl->transform );
mbedtls_free( ssl->transform );
}
ssl->transform = ssl->transform_negotiate;
ssl->transform_negotiate = NULL;
MBEDTLS_SSL_DEBUG_MSG( 3, ( "<= handshake wrapup: final free" ) );
}
void mbedtls_ssl_handshake_wrapup( mbedtls_ssl_context *ssl )
{
int resume = ssl->handshake->resume;
MBEDTLS_SSL_DEBUG_MSG( 3, ( "=> handshake wrapup" ) );
#if defined(MBEDTLS_SSL_RENEGOTIATION)
if( ssl->renego_status == MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS )
{
ssl->renego_status = MBEDTLS_SSL_RENEGOTIATION_DONE;
ssl->renego_records_seen = 0;
}
#endif
/*
* Free the previous session and switch in the current one
*/
if( ssl->session )
{
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
/* RFC 7366 3.1: keep the EtM state */
ssl->session_negotiate->encrypt_then_mac =
ssl->session->encrypt_then_mac;
#endif
mbedtls_ssl_session_free( ssl->session );
mbedtls_free( ssl->session );
}
ssl->session = ssl->session_negotiate;
ssl->session_negotiate = NULL;
/*
* Add cache entry
*/
if( ssl->conf->f_set_cache != NULL &&
ssl->session->id_len != 0 &&
resume == 0 )
{
if( ssl->conf->f_set_cache( ssl->conf->p_cache,
ssl->session->id,
ssl->session->id_len,
ssl->session ) != 0 )
MBEDTLS_SSL_DEBUG_MSG( 1, ( "cache did not store session" ) );
}
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
ssl->handshake->flight != NULL )
{
/* Cancel handshake timer */
mbedtls_ssl_set_timer( ssl, 0 );
/* Keep last flight around in case we need to resend it:
* we need the handshake and transform structures for that */
MBEDTLS_SSL_DEBUG_MSG( 3, ( "skip freeing handshake and transform" ) );
}
else
#endif
mbedtls_ssl_handshake_wrapup_free_hs_transform( ssl );
ssl->state++;
MBEDTLS_SSL_DEBUG_MSG( 3, ( "<= handshake wrapup" ) );
}
int mbedtls_ssl_write_finished( mbedtls_ssl_context *ssl )
{
int ret, hash_len;
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> write finished" ) );
mbedtls_ssl_update_out_pointers( ssl, ssl->transform_negotiate );
ssl->handshake->calc_finished( ssl, ssl->out_msg + 4, ssl->conf->endpoint );
/*
* RFC 5246 7.4.9 (Page 63) says 12 is the default length and ciphersuites
* may define some other value. Currently (early 2016), no defined
* ciphersuite does this (and this is unlikely to change as activity has
* moved to TLS 1.3 now) so we can keep the hardcoded 12 here.
*/
hash_len = 12;
#if defined(MBEDTLS_SSL_RENEGOTIATION)
ssl->verify_data_len = hash_len;
memcpy( ssl->own_verify_data, ssl->out_msg + 4, hash_len );
#endif
ssl->out_msglen = 4 + hash_len;
ssl->out_msgtype = MBEDTLS_SSL_MSG_HANDSHAKE;
ssl->out_msg[0] = MBEDTLS_SSL_HS_FINISHED;
/*
* In case of session resuming, invert the client and server
* ChangeCipherSpec messages order.
*/
if( ssl->handshake->resume != 0 )
{
#if defined(MBEDTLS_SSL_CLI_C)
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT )
ssl->state = MBEDTLS_SSL_HANDSHAKE_WRAPUP;
#endif
#if defined(MBEDTLS_SSL_SRV_C)
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
ssl->state = MBEDTLS_SSL_CLIENT_CHANGE_CIPHER_SPEC;
#endif
}
else
ssl->state++;
/*
* Switch to our negotiated transform and session parameters for outbound
* data.
*/
MBEDTLS_SSL_DEBUG_MSG( 3, ( "switching to new transform spec for outbound data" ) );
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
{
unsigned char i;
/* Remember current epoch settings for resending */
ssl->handshake->alt_transform_out = ssl->transform_out;
memcpy( ssl->handshake->alt_out_ctr, ssl->cur_out_ctr,
sizeof( ssl->handshake->alt_out_ctr ) );
/* Set sequence_number to zero */
memset( &ssl->cur_out_ctr[2], 0, sizeof( ssl->cur_out_ctr ) - 2 );
/* Increment epoch */
for( i = 2; i > 0; i-- )
if( ++ssl->cur_out_ctr[i - 1] != 0 )
break;
/* The loop goes to its end iff the counter is wrapping */
if( i == 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "DTLS epoch would wrap" ) );
return( MBEDTLS_ERR_SSL_COUNTER_WRAPPING );
}
}
else
#endif /* MBEDTLS_SSL_PROTO_DTLS */
memset( ssl->cur_out_ctr, 0, sizeof( ssl->cur_out_ctr ) );
ssl->transform_out = ssl->transform_negotiate;
ssl->session_out = ssl->session_negotiate;
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
mbedtls_ssl_send_flight_completed( ssl );
#endif
if( ( ret = mbedtls_ssl_write_handshake_msg( ssl ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_write_handshake_msg", ret );
return( ret );
}
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
( ret = mbedtls_ssl_flight_transmit( ssl ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_flight_transmit", ret );
return( ret );
}
#endif
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= write finished" ) );
return( 0 );
}
#define SSL_MAX_HASH_LEN 12
int mbedtls_ssl_parse_finished( mbedtls_ssl_context *ssl )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
unsigned int hash_len = 12;
unsigned char buf[SSL_MAX_HASH_LEN];
MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> parse finished" ) );
ssl->handshake->calc_finished( ssl, buf, ssl->conf->endpoint ^ 1 );
if( ( ret = mbedtls_ssl_read_record( ssl, 1 ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_read_record", ret );
goto exit;
}
if( ssl->in_msgtype != MBEDTLS_SSL_MSG_HANDSHAKE )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad finished message" ) );
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_UNEXPECTED_MESSAGE );
ret = MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE;
goto exit;
}
if( ssl->in_msg[0] != MBEDTLS_SSL_HS_FINISHED )
{
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_UNEXPECTED_MESSAGE );
ret = MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE;
goto exit;
}
if( ssl->in_hslen != mbedtls_ssl_hs_hdr_len( ssl ) + hash_len )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad finished message" ) );
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR );
ret = MBEDTLS_ERR_SSL_DECODE_ERROR;
goto exit;
}
if( mbedtls_ct_memcmp( ssl->in_msg + mbedtls_ssl_hs_hdr_len( ssl ),
buf, hash_len ) != 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "bad finished message" ) );
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_DECRYPT_ERROR );
ret = MBEDTLS_ERR_SSL_HANDSHAKE_FAILURE;
goto exit;
}
#if defined(MBEDTLS_SSL_RENEGOTIATION)
ssl->verify_data_len = hash_len;
memcpy( ssl->peer_verify_data, buf, hash_len );
#endif
if( ssl->handshake->resume != 0 )
{
#if defined(MBEDTLS_SSL_CLI_C)
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_CLIENT )
ssl->state = MBEDTLS_SSL_CLIENT_CHANGE_CIPHER_SPEC;
#endif
#if defined(MBEDTLS_SSL_SRV_C)
if( ssl->conf->endpoint == MBEDTLS_SSL_IS_SERVER )
ssl->state = MBEDTLS_SSL_HANDSHAKE_WRAPUP;
#endif
}
else
ssl->state++;
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
mbedtls_ssl_recv_flight_completed( ssl );
#endif
MBEDTLS_SSL_DEBUG_MSG( 2, ( "<= parse finished" ) );
exit:
mbedtls_platform_zeroize( buf, hash_len );
return( ret );
}
#if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION)
/*
* Helper to get TLS 1.2 PRF from ciphersuite
* (Duplicates bits of logic from ssl_set_handshake_prfs().)
*/
static tls_prf_fn ssl_tls12prf_from_cs( int ciphersuite_id )
{
#if defined(MBEDTLS_SHA384_C)
const mbedtls_ssl_ciphersuite_t * const ciphersuite_info =
mbedtls_ssl_ciphersuite_from_id( ciphersuite_id );
if( ciphersuite_info->mac == MBEDTLS_MD_SHA384 )
return( tls_prf_sha384 );
#else
(void) ciphersuite_id;
#endif
return( tls_prf_sha256 );
}
#endif /* MBEDTLS_SSL_CONTEXT_SERIALIZATION */
static mbedtls_tls_prf_types tls_prf_get_type( mbedtls_ssl_tls_prf_cb *tls_prf )
{
((void) tls_prf);
#if defined(MBEDTLS_SHA384_C)
if( tls_prf == tls_prf_sha384 )
{
return( MBEDTLS_SSL_TLS_PRF_SHA384 );
}
else
#endif
#if defined(MBEDTLS_SHA256_C)
if( tls_prf == tls_prf_sha256 )
{
return( MBEDTLS_SSL_TLS_PRF_SHA256 );
}
else
#endif
return( MBEDTLS_SSL_TLS_PRF_NONE );
}
/*
* Populate a transform structure with session keys and all the other
* necessary information.
*
* Parameters:
* - [in/out]: transform: structure to populate
* [in] must be just initialised with mbedtls_ssl_transform_init()
* [out] fully populated, ready for use by mbedtls_ssl_{en,de}crypt_buf()
* - [in] ciphersuite
* - [in] master
* - [in] encrypt_then_mac
* - [in] compression
* - [in] tls_prf: pointer to PRF to use for key derivation
* - [in] randbytes: buffer holding ServerHello.random + ClientHello.random
* - [in] tls_version: TLS version
* - [in] endpoint: client or server
* - [in] ssl: used for:
* - ssl->conf->{f,p}_export_keys
* [in] optionally used for:
* - MBEDTLS_DEBUG_C: ssl->conf->{f,p}_dbg
*/
static int ssl_tls12_populate_transform( mbedtls_ssl_transform *transform,
int ciphersuite,
const unsigned char master[48],
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM)
int encrypt_then_mac,
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM */
ssl_tls_prf_t tls_prf,
const unsigned char randbytes[64],
mbedtls_ssl_protocol_version tls_version,
unsigned endpoint,
const mbedtls_ssl_context *ssl )
{
int ret = 0;
unsigned char keyblk[256];
unsigned char *key1;
unsigned char *key2;
unsigned char *mac_enc;
unsigned char *mac_dec;
size_t mac_key_len = 0;
size_t iv_copy_len;
size_t keylen;
const mbedtls_ssl_ciphersuite_t *ciphersuite_info;
mbedtls_ssl_mode_t ssl_mode;
#if !defined(MBEDTLS_USE_PSA_CRYPTO)
const mbedtls_cipher_info_t *cipher_info;
const mbedtls_md_info_t *md_info;
#endif /* !MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_key_type_t key_type;
psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
psa_algorithm_t alg;
psa_algorithm_t mac_alg = 0;
size_t key_bits;
psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED;
#endif
#if !defined(MBEDTLS_DEBUG_C) && \
!defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
if( ssl->f_export_keys == NULL )
{
ssl = NULL; /* make sure we don't use it except for these cases */
(void) ssl;
}
#endif
/*
* Some data just needs copying into the structure
*/
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM)
transform->encrypt_then_mac = encrypt_then_mac;
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM */
transform->tls_version = tls_version;
#if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION)
memcpy( transform->randbytes, randbytes, sizeof( transform->randbytes ) );
#endif
#if defined(MBEDTLS_SSL_PROTO_TLS1_3)
if( tls_version == MBEDTLS_SSL_VERSION_TLS1_3 )
{
/* At the moment, we keep TLS <= 1.2 and TLS 1.3 transform
* generation separate. This should never happen. */
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
#endif /* MBEDTLS_SSL_PROTO_TLS1_3 */
/*
* Get various info structures
*/
ciphersuite_info = mbedtls_ssl_ciphersuite_from_id( ciphersuite );
if( ciphersuite_info == NULL )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "ciphersuite info for %d not found",
ciphersuite ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
ssl_mode = mbedtls_ssl_get_mode_from_ciphersuite(
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM)
encrypt_then_mac,
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC_ETM */
ciphersuite_info );
if( ssl_mode == MBEDTLS_SSL_MODE_AEAD )
transform->taglen =
ciphersuite_info->flags & MBEDTLS_CIPHERSUITE_SHORT_TAG ? 8 : 16;
#if defined(MBEDTLS_USE_PSA_CRYPTO)
if( ( status = mbedtls_ssl_cipher_to_psa( ciphersuite_info->cipher,
transform->taglen,
&alg,
&key_type,
&key_bits ) ) != PSA_SUCCESS )
{
ret = psa_ssl_status_to_mbedtls( status );
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_cipher_to_psa", ret );
goto end;
}
#else
cipher_info = mbedtls_cipher_info_from_type( ciphersuite_info->cipher );
if( cipher_info == NULL )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "cipher info for %u not found",
ciphersuite_info->cipher ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_USE_PSA_CRYPTO)
mac_alg = mbedtls_psa_translate_md( ciphersuite_info->mac );
if( mac_alg == 0 )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "mbedtls_psa_translate_md for %u not found",
(unsigned) ciphersuite_info->mac ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
#else
md_info = mbedtls_md_info_from_type( ciphersuite_info->mac );
if( md_info == NULL )
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "mbedtls_md info for %u not found",
(unsigned) ciphersuite_info->mac ) );
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
/* Copy own and peer's CID if the use of the CID
* extension has been negotiated. */
if( ssl->handshake->cid_in_use == MBEDTLS_SSL_CID_ENABLED )
{
MBEDTLS_SSL_DEBUG_MSG( 3, ( "Copy CIDs into SSL transform" ) );
transform->in_cid_len = ssl->own_cid_len;
memcpy( transform->in_cid, ssl->own_cid, ssl->own_cid_len );
MBEDTLS_SSL_DEBUG_BUF( 3, "Incoming CID", transform->in_cid,
transform->in_cid_len );
transform->out_cid_len = ssl->handshake->peer_cid_len;
memcpy( transform->out_cid, ssl->handshake->peer_cid,
ssl->handshake->peer_cid_len );
MBEDTLS_SSL_DEBUG_BUF( 3, "Outgoing CID", transform->out_cid,
transform->out_cid_len );
}
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
/*
* Compute key block using the PRF
*/
ret = tls_prf( master, 48, "key expansion", randbytes, 64, keyblk, 256 );
if( ret != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "prf", ret );
return( ret );
}
MBEDTLS_SSL_DEBUG_MSG( 3, ( "ciphersuite = %s",
mbedtls_ssl_get_ciphersuite_name( ciphersuite ) ) );
MBEDTLS_SSL_DEBUG_BUF( 3, "master secret", master, 48 );
MBEDTLS_SSL_DEBUG_BUF( 4, "random bytes", randbytes, 64 );
MBEDTLS_SSL_DEBUG_BUF( 4, "key block", keyblk, 256 );
/*
* Determine the appropriate key, IV and MAC length.
*/
#if defined(MBEDTLS_USE_PSA_CRYPTO)
keylen = PSA_BITS_TO_BYTES(key_bits);
#else
keylen = mbedtls_cipher_info_get_key_bitlen( cipher_info ) / 8;
#endif
#if defined(MBEDTLS_GCM_C) || \
defined(MBEDTLS_CCM_C) || \
defined(MBEDTLS_CHACHAPOLY_C)
if( ssl_mode == MBEDTLS_SSL_MODE_AEAD )
{
size_t explicit_ivlen;
transform->maclen = 0;
mac_key_len = 0;
/* All modes haves 96-bit IVs, but the length of the static parts vary
* with mode and version:
* - For GCM and CCM in TLS 1.2, there's a static IV of 4 Bytes
* (to be concatenated with a dynamically chosen IV of 8 Bytes)
* - For ChaChaPoly in TLS 1.2, and all modes in TLS 1.3, there's
* a static IV of 12 Bytes (to be XOR'ed with the 8 Byte record
* sequence number).
*/
transform->ivlen = 12;
#if defined(MBEDTLS_USE_PSA_CRYPTO)
if( key_type == PSA_KEY_TYPE_CHACHA20 )
#else
if( mbedtls_cipher_info_get_mode( cipher_info ) == MBEDTLS_MODE_CHACHAPOLY )
#endif /* MBEDTLS_USE_PSA_CRYPTO */
transform->fixed_ivlen = 12;
else
transform->fixed_ivlen = 4;
/* Minimum length of encrypted record */
explicit_ivlen = transform->ivlen - transform->fixed_ivlen;
transform->minlen = explicit_ivlen + transform->taglen;
}
else
#endif /* MBEDTLS_GCM_C || MBEDTLS_CCM_C || MBEDTLS_CHACHAPOLY_C */
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC)
if( ssl_mode == MBEDTLS_SSL_MODE_STREAM ||
ssl_mode == MBEDTLS_SSL_MODE_CBC ||
ssl_mode == MBEDTLS_SSL_MODE_CBC_ETM )
{
#if defined(MBEDTLS_USE_PSA_CRYPTO)
size_t block_size = PSA_BLOCK_CIPHER_BLOCK_LENGTH( key_type );
#else
size_t block_size = cipher_info->block_size;
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_USE_PSA_CRYPTO)
/* Get MAC length */
mac_key_len = PSA_HASH_LENGTH(mac_alg);
#else
/* Initialize HMAC contexts */
if( ( ret = mbedtls_md_setup( &transform->md_ctx_enc, md_info, 1 ) ) != 0 ||
( ret = mbedtls_md_setup( &transform->md_ctx_dec, md_info, 1 ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_md_setup", ret );
goto end;
}
/* Get MAC length */
mac_key_len = mbedtls_md_get_size( md_info );
#endif /* MBEDTLS_USE_PSA_CRYPTO */
transform->maclen = mac_key_len;
/* IV length */
#if defined(MBEDTLS_USE_PSA_CRYPTO)
transform->ivlen = PSA_CIPHER_IV_LENGTH( key_type, alg );
#else
transform->ivlen = cipher_info->iv_size;
#endif /* MBEDTLS_USE_PSA_CRYPTO */
/* Minimum length */
if( ssl_mode == MBEDTLS_SSL_MODE_STREAM )
transform->minlen = transform->maclen;
else
{
/*
* GenericBlockCipher:
* 1. if EtM is in use: one block plus MAC
* otherwise: * first multiple of blocklen greater than maclen
* 2. IV
*/
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
if( ssl_mode == MBEDTLS_SSL_MODE_CBC_ETM )
{
transform->minlen = transform->maclen
+ block_size;
}
else
#endif
{
transform->minlen = transform->maclen
+ block_size
- transform->maclen % block_size;
}
if( tls_version == MBEDTLS_SSL_VERSION_TLS1_2 )
{
transform->minlen += transform->ivlen;
}
else
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
ret = MBEDTLS_ERR_SSL_INTERNAL_ERROR;
goto end;
}
}
}
else
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
}
MBEDTLS_SSL_DEBUG_MSG( 3, ( "keylen: %u, minlen: %u, ivlen: %u, maclen: %u",
(unsigned) keylen,
(unsigned) transform->minlen,
(unsigned) transform->ivlen,
(unsigned) transform->maclen ) );
/*
* Finally setup the cipher contexts, IVs and MAC secrets.
*/
#if defined(MBEDTLS_SSL_CLI_C)
if( endpoint == MBEDTLS_SSL_IS_CLIENT )
{
key1 = keyblk + mac_key_len * 2;
key2 = keyblk + mac_key_len * 2 + keylen;
mac_enc = keyblk;
mac_dec = keyblk + mac_key_len;
iv_copy_len = ( transform->fixed_ivlen ) ?
transform->fixed_ivlen : transform->ivlen;
memcpy( transform->iv_enc, key2 + keylen, iv_copy_len );
memcpy( transform->iv_dec, key2 + keylen + iv_copy_len,
iv_copy_len );
}
else
#endif /* MBEDTLS_SSL_CLI_C */
#if defined(MBEDTLS_SSL_SRV_C)
if( endpoint == MBEDTLS_SSL_IS_SERVER )
{
key1 = keyblk + mac_key_len * 2 + keylen;
key2 = keyblk + mac_key_len * 2;
mac_enc = keyblk + mac_key_len;
mac_dec = keyblk;
iv_copy_len = ( transform->fixed_ivlen ) ?
transform->fixed_ivlen : transform->ivlen;
memcpy( transform->iv_dec, key1 + keylen, iv_copy_len );
memcpy( transform->iv_enc, key1 + keylen + iv_copy_len,
iv_copy_len );
}
else
#endif /* MBEDTLS_SSL_SRV_C */
{
MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
ret = MBEDTLS_ERR_SSL_INTERNAL_ERROR;
goto end;
}
if( ssl != NULL && ssl->f_export_keys != NULL )
{
ssl->f_export_keys( ssl->p_export_keys,
MBEDTLS_SSL_KEY_EXPORT_TLS12_MASTER_SECRET,
master, 48,
randbytes + 32,
randbytes,
tls_prf_get_type( tls_prf ) );
}
#if defined(MBEDTLS_USE_PSA_CRYPTO)
transform->psa_alg = alg;
if ( alg != MBEDTLS_SSL_NULL_CIPHER )
{
psa_set_key_usage_flags( &attributes, PSA_KEY_USAGE_ENCRYPT );
psa_set_key_algorithm( &attributes, alg );
psa_set_key_type( &attributes, key_type );
if( ( status = psa_import_key( &attributes,
key1,
PSA_BITS_TO_BYTES( key_bits ),
&transform->psa_key_enc ) ) != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_RET( 3, "psa_import_key", (int)status );
ret = psa_ssl_status_to_mbedtls( status );
MBEDTLS_SSL_DEBUG_RET( 1, "psa_import_key", ret );
goto end;
}
psa_set_key_usage_flags( &attributes, PSA_KEY_USAGE_DECRYPT );
if( ( status = psa_import_key( &attributes,
key2,
PSA_BITS_TO_BYTES( key_bits ),
&transform->psa_key_dec ) ) != PSA_SUCCESS )
{
ret = psa_ssl_status_to_mbedtls( status );
MBEDTLS_SSL_DEBUG_RET( 1, "psa_import_key", ret );
goto end;
}
}
#else
if( ( ret = mbedtls_cipher_setup( &transform->cipher_ctx_enc,
cipher_info ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_cipher_setup", ret );
goto end;
}
if( ( ret = mbedtls_cipher_setup( &transform->cipher_ctx_dec,
cipher_info ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_cipher_setup", ret );
goto end;
}
if( ( ret = mbedtls_cipher_setkey( &transform->cipher_ctx_enc, key1,
(int) mbedtls_cipher_info_get_key_bitlen( cipher_info ),
MBEDTLS_ENCRYPT ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_cipher_setkey", ret );
goto end;
}
if( ( ret = mbedtls_cipher_setkey( &transform->cipher_ctx_dec, key2,
(int) mbedtls_cipher_info_get_key_bitlen( cipher_info ),
MBEDTLS_DECRYPT ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_cipher_setkey", ret );
goto end;
}
#if defined(MBEDTLS_CIPHER_MODE_CBC)
if( mbedtls_cipher_info_get_mode( cipher_info ) == MBEDTLS_MODE_CBC )
{
if( ( ret = mbedtls_cipher_set_padding_mode( &transform->cipher_ctx_enc,
MBEDTLS_PADDING_NONE ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_cipher_set_padding_mode", ret );
goto end;
}
if( ( ret = mbedtls_cipher_set_padding_mode( &transform->cipher_ctx_dec,
MBEDTLS_PADDING_NONE ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_cipher_set_padding_mode", ret );
goto end;
}
}
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC)
/* For HMAC-based ciphersuites, initialize the HMAC transforms.
For AEAD-based ciphersuites, there is nothing to do here. */
if( mac_key_len != 0 )
{
#if defined(MBEDTLS_USE_PSA_CRYPTO)
transform->psa_mac_alg = PSA_ALG_HMAC( mac_alg );
psa_set_key_usage_flags( &attributes, PSA_KEY_USAGE_SIGN_MESSAGE );
psa_set_key_algorithm( &attributes, PSA_ALG_HMAC( mac_alg ) );
psa_set_key_type( &attributes, PSA_KEY_TYPE_HMAC );
if( ( status = psa_import_key( &attributes,
mac_enc, mac_key_len,
&transform->psa_mac_enc ) ) != PSA_SUCCESS )
{
ret = psa_ssl_status_to_mbedtls( status );
MBEDTLS_SSL_DEBUG_RET( 1, "psa_import_mac_key", ret );
goto end;
}
if( ( transform->psa_alg == MBEDTLS_SSL_NULL_CIPHER ) ||
( ( transform->psa_alg == PSA_ALG_CBC_NO_PADDING ) &&
( transform->encrypt_then_mac == MBEDTLS_SSL_ETM_DISABLED ) ) )
/* mbedtls_ct_hmac() requires the key to be exportable */
psa_set_key_usage_flags( &attributes, PSA_KEY_USAGE_EXPORT |
PSA_KEY_USAGE_VERIFY_HASH );
else
psa_set_key_usage_flags( &attributes, PSA_KEY_USAGE_VERIFY_HASH );
if( ( status = psa_import_key( &attributes,
mac_dec, mac_key_len,
&transform->psa_mac_dec ) ) != PSA_SUCCESS )
{
ret = psa_ssl_status_to_mbedtls( status );
MBEDTLS_SSL_DEBUG_RET( 1, "psa_import_mac_key", ret );
goto end;
}
#else
ret = mbedtls_md_hmac_starts( &transform->md_ctx_enc, mac_enc, mac_key_len );
if( ret != 0 )
goto end;
ret = mbedtls_md_hmac_starts( &transform->md_ctx_dec, mac_dec, mac_key_len );
if( ret != 0 )
goto end;
#endif /* MBEDTLS_USE_PSA_CRYPTO */
}
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */
((void) mac_dec);
((void) mac_enc);
end:
mbedtls_platform_zeroize( keyblk, sizeof( keyblk ) );
return( ret );
}
#if defined(MBEDTLS_USE_PSA_CRYPTO)
int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl,
unsigned char *hash, size_t *hashlen,
unsigned char *data, size_t data_len,
mbedtls_md_type_t md_alg )
{
psa_status_t status;
psa_hash_operation_t hash_operation = PSA_HASH_OPERATION_INIT;
psa_algorithm_t hash_alg = mbedtls_psa_translate_md( md_alg );
MBEDTLS_SSL_DEBUG_MSG( 3, ( "Perform PSA-based computation of digest of ServerKeyExchange" ) );
if( ( status = psa_hash_setup( &hash_operation,
hash_alg ) ) != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_RET( 1, "psa_hash_setup", status );
goto exit;
}
if( ( status = psa_hash_update( &hash_operation, ssl->handshake->randbytes,
64 ) ) != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_RET( 1, "psa_hash_update", status );
goto exit;
}
if( ( status = psa_hash_update( &hash_operation,
data, data_len ) ) != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_RET( 1, "psa_hash_update", status );
goto exit;
}
if( ( status = psa_hash_finish( &hash_operation, hash, PSA_HASH_MAX_SIZE,
hashlen ) ) != PSA_SUCCESS )
{
MBEDTLS_SSL_DEBUG_RET( 1, "psa_hash_finish", status );
goto exit;
}
exit:
if( status != PSA_SUCCESS )
{
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_INTERNAL_ERROR );
switch( status )
{
case PSA_ERROR_NOT_SUPPORTED:
return( MBEDTLS_ERR_MD_FEATURE_UNAVAILABLE );
case PSA_ERROR_BAD_STATE: /* Intentional fallthrough */
case PSA_ERROR_BUFFER_TOO_SMALL:
return( MBEDTLS_ERR_MD_BAD_INPUT_DATA );
case PSA_ERROR_INSUFFICIENT_MEMORY:
return( MBEDTLS_ERR_MD_ALLOC_FAILED );
default:
return( MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED );
}
}
return( 0 );
}
#else
int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl,
unsigned char *hash, size_t *hashlen,
unsigned char *data, size_t data_len,
mbedtls_md_type_t md_alg )
{
int ret = 0;
mbedtls_md_context_t ctx;
const mbedtls_md_info_t *md_info = mbedtls_md_info_from_type( md_alg );
*hashlen = mbedtls_md_get_size( md_info );
MBEDTLS_SSL_DEBUG_MSG( 3, ( "Perform mbedtls-based computation of digest of ServerKeyExchange" ) );
mbedtls_md_init( &ctx );
/*
* digitally-signed struct {
* opaque client_random[32];
* opaque server_random[32];
* ServerDHParams params;
* };
*/
if( ( ret = mbedtls_md_setup( &ctx, md_info, 0 ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_md_setup", ret );
goto exit;
}
if( ( ret = mbedtls_md_starts( &ctx ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_md_starts", ret );
goto exit;
}
if( ( ret = mbedtls_md_update( &ctx, ssl->handshake->randbytes, 64 ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_md_update", ret );
goto exit;
}
if( ( ret = mbedtls_md_update( &ctx, data, data_len ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_md_update", ret );
goto exit;
}
if( ( ret = mbedtls_md_finish( &ctx, hash ) ) != 0 )
{
MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_md_finish", ret );
goto exit;
}
exit:
mbedtls_md_free( &ctx );
if( ret != 0 )
mbedtls_ssl_send_alert_message( ssl, MBEDTLS_SSL_ALERT_LEVEL_FATAL,
MBEDTLS_SSL_ALERT_MSG_INTERNAL_ERROR );
return( ret );
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
/* Find an entry in a signature-hash set matching a given hash algorithm. */
mbedtls_md_type_t mbedtls_ssl_sig_hash_set_find( mbedtls_ssl_sig_hash_set_t *set,
mbedtls_pk_type_t sig_alg )
{
switch( sig_alg )
{
case MBEDTLS_PK_RSA:
return( set->rsa );
case MBEDTLS_PK_ECDSA:
return( set->ecdsa );
default:
return( MBEDTLS_MD_NONE );
}
}
/* Add a signature-hash-pair to a signature-hash set */
void mbedtls_ssl_sig_hash_set_add( mbedtls_ssl_sig_hash_set_t *set,
mbedtls_pk_type_t sig_alg,
mbedtls_md_type_t md_alg )
{
switch( sig_alg )
{
case MBEDTLS_PK_RSA:
if( set->rsa == MBEDTLS_MD_NONE )
set->rsa = md_alg;
break;
case MBEDTLS_PK_ECDSA:
if( set->ecdsa == MBEDTLS_MD_NONE )
set->ecdsa = md_alg;
break;
default:
break;
}
}
/* Allow exactly one hash algorithm for each signature. */
void mbedtls_ssl_sig_hash_set_const_hash( mbedtls_ssl_sig_hash_set_t *set,
mbedtls_md_type_t md_alg )
{
set->rsa = md_alg;
set->ecdsa = md_alg;
}
#endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
/* Serialization of TLS 1.2 sessions:
*
* struct {
* uint64 start_time;
* uint8 ciphersuite[2]; // defined by the standard
* uint8 compression; // 0 or 1
* uint8 session_id_len; // at most 32
* opaque session_id[32];
* opaque master[48]; // fixed length in the standard
* uint32 verify_result;
* opaque peer_cert<0..2^24-1>; // length 0 means no peer cert
* opaque ticket<0..2^24-1>; // length 0 means no ticket
* uint32 ticket_lifetime;
* uint8 mfl_code; // up to 255 according to standard
* uint8 encrypt_then_mac; // 0 or 1
* } serialized_session_tls12;
*
*/
static size_t ssl_session_save_tls12( const mbedtls_ssl_session *session,
unsigned char *buf,
size_t buf_len )
{
unsigned char *p = buf;
size_t used = 0;
#if defined(MBEDTLS_HAVE_TIME)
uint64_t start;
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
size_t cert_len;
#endif /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
/*
* Time
*/
#if defined(MBEDTLS_HAVE_TIME)
used += 8;
if( used <= buf_len )
{
start = (uint64_t) session->start;
MBEDTLS_PUT_UINT64_BE( start, p, 0 );
p += 8;
}
#endif /* MBEDTLS_HAVE_TIME */
/*
* Basic mandatory fields
*/
used += 2 /* ciphersuite */
+ 1 /* compression */
+ 1 /* id_len */
+ sizeof( session->id )
+ sizeof( session->master )
+ 4; /* verify_result */
if( used <= buf_len )
{
MBEDTLS_PUT_UINT16_BE( session->ciphersuite, p, 0 );
p += 2;
*p++ = MBEDTLS_BYTE_0( session->compression );
*p++ = MBEDTLS_BYTE_0( session->id_len );
memcpy( p, session->id, 32 );
p += 32;
memcpy( p, session->master, 48 );
p += 48;
MBEDTLS_PUT_UINT32_BE( session->verify_result, p, 0 );
p += 4;
}
/*
* Peer's end-entity certificate
*/
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
if( session->peer_cert == NULL )
cert_len = 0;
else
cert_len = session->peer_cert->raw.len;
used += 3 + cert_len;
if( used <= buf_len )
{
*p++ = MBEDTLS_BYTE_2( cert_len );
*p++ = MBEDTLS_BYTE_1( cert_len );
*p++ = MBEDTLS_BYTE_0( cert_len );
if( session->peer_cert != NULL )
{
memcpy( p, session->peer_cert->raw.p, cert_len );
p += cert_len;
}
}
#else /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
if( session->peer_cert_digest != NULL )
{
used += 1 /* type */ + 1 /* length */ + session->peer_cert_digest_len;
if( used <= buf_len )
{
*p++ = (unsigned char) session->peer_cert_digest_type;
*p++ = (unsigned char) session->peer_cert_digest_len;
memcpy( p, session->peer_cert_digest,
session->peer_cert_digest_len );
p += session->peer_cert_digest_len;
}
}
else
{
used += 2;
if( used <= buf_len )
{
*p++ = (unsigned char) MBEDTLS_MD_NONE;
*p++ = 0;
}
}
#endif /* !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
/*
* Session ticket if any, plus associated data
*/
#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C)
used += 3 + session->ticket_len + 4; /* len + ticket + lifetime */
if( used <= buf_len )
{
*p++ = MBEDTLS_BYTE_2( session->ticket_len );
*p++ = MBEDTLS_BYTE_1( session->ticket_len );
*p++ = MBEDTLS_BYTE_0( session->ticket_len );
if( session->ticket != NULL )
{
memcpy( p, session->ticket, session->ticket_len );
p += session->ticket_len;
}
MBEDTLS_PUT_UINT32_BE( session->ticket_lifetime, p, 0 );
p += 4;
}
#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */
/*
* Misc extension-related info
*/
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
used += 1;
if( used <= buf_len )
*p++ = session->mfl_code;
#endif
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
used += 1;
if( used <= buf_len )
*p++ = MBEDTLS_BYTE_0( session->encrypt_then_mac );
#endif
return( used );
}
static int ssl_session_load_tls12( mbedtls_ssl_session *session,
const unsigned char *buf,
size_t len )
{
#if defined(MBEDTLS_HAVE_TIME)
uint64_t start;
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
size_t cert_len;
#endif /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
const unsigned char *p = buf;
const unsigned char * const end = buf + len;
/*
* Time
*/
#if defined(MBEDTLS_HAVE_TIME)
if( 8 > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
start = ( (uint64_t) p[0] << 56 ) |
( (uint64_t) p[1] << 48 ) |
( (uint64_t) p[2] << 40 ) |
( (uint64_t) p[3] << 32 ) |
( (uint64_t) p[4] << 24 ) |
( (uint64_t) p[5] << 16 ) |
( (uint64_t) p[6] << 8 ) |
( (uint64_t) p[7] );
p += 8;
session->start = (time_t) start;
#endif /* MBEDTLS_HAVE_TIME */
/*
* Basic mandatory fields
*/
if( 2 + 1 + 1 + 32 + 48 + 4 > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session->ciphersuite = ( p[0] << 8 ) | p[1];
p += 2;
session->compression = *p++;
session->id_len = *p++;
memcpy( session->id, p, 32 );
p += 32;
memcpy( session->master, p, 48 );
p += 48;
session->verify_result = ( (uint32_t) p[0] << 24 ) |
( (uint32_t) p[1] << 16 ) |
( (uint32_t) p[2] << 8 ) |
( (uint32_t) p[3] );
p += 4;
/* Immediately clear invalid pointer values that have been read, in case
* we exit early before we replaced them with valid ones. */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
session->peer_cert = NULL;
#else
session->peer_cert_digest = NULL;
#endif /* !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C)
session->ticket = NULL;
#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */
/*
* Peer certificate
*/
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
/* Deserialize CRT from the end of the ticket. */
if( 3 > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
cert_len = ( p[0] << 16 ) | ( p[1] << 8 ) | p[2];
p += 3;
if( cert_len != 0 )
{
int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
if( cert_len > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session->peer_cert = mbedtls_calloc( 1, sizeof( mbedtls_x509_crt ) );
if( session->peer_cert == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
mbedtls_x509_crt_init( session->peer_cert );
if( ( ret = mbedtls_x509_crt_parse_der( session->peer_cert,
p, cert_len ) ) != 0 )
{
mbedtls_x509_crt_free( session->peer_cert );
mbedtls_free( session->peer_cert );
session->peer_cert = NULL;
return( ret );
}
p += cert_len;
}
#else /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
/* Deserialize CRT digest from the end of the ticket. */
if( 2 > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session->peer_cert_digest_type = (mbedtls_md_type_t) *p++;
session->peer_cert_digest_len = (size_t) *p++;
if( session->peer_cert_digest_len != 0 )
{
const mbedtls_md_info_t *md_info =
mbedtls_md_info_from_type( session->peer_cert_digest_type );
if( md_info == NULL )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( session->peer_cert_digest_len != mbedtls_md_get_size( md_info ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
if( session->peer_cert_digest_len > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session->peer_cert_digest =
mbedtls_calloc( 1, session->peer_cert_digest_len );
if( session->peer_cert_digest == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
memcpy( session->peer_cert_digest, p,
session->peer_cert_digest_len );
p += session->peer_cert_digest_len;
}
#endif /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
/*
* Session ticket and associated data
*/
#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C)
if( 3 > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session->ticket_len = ( p[0] << 16 ) | ( p[1] << 8 ) | p[2];
p += 3;
if( session->ticket_len != 0 )
{
if( session->ticket_len > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session->ticket = mbedtls_calloc( 1, session->ticket_len );
if( session->ticket == NULL )
return( MBEDTLS_ERR_SSL_ALLOC_FAILED );
memcpy( session->ticket, p, session->ticket_len );
p += session->ticket_len;
}
if( 4 > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session->ticket_lifetime = ( (uint32_t) p[0] << 24 ) |
( (uint32_t) p[1] << 16 ) |
( (uint32_t) p[2] << 8 ) |
( (uint32_t) p[3] );
p += 4;
#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */
/*
* Misc extension-related info
*/
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
if( 1 > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session->mfl_code = *p++;
#endif
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
if( 1 > (size_t)( end - p ) )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
session->encrypt_then_mac = *p++;
#endif
/* Done, should have consumed entire buffer */
if( p != end )
return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
return( 0 );
}
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
int mbedtls_ssl_validate_ciphersuite(
const mbedtls_ssl_context *ssl,
const mbedtls_ssl_ciphersuite_t *suite_info,
mbedtls_ssl_protocol_version min_tls_version,
mbedtls_ssl_protocol_version max_tls_version )
{
(void) ssl;
if( suite_info == NULL )
return( -1 );
if( ( suite_info->min_tls_version > max_tls_version ) ||
( suite_info->max_tls_version < min_tls_version ) )
{
return( -1 );
}
#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && defined(MBEDTLS_SSL_CLI_C)
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
if( suite_info->key_exchange == MBEDTLS_KEY_EXCHANGE_ECJPAKE &&
mbedtls_ecjpake_check( &ssl->handshake->ecjpake_ctx ) != 0 )
{
return( -1 );
}
#endif
/* Don't suggest PSK-based ciphersuite if no PSK is available. */
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
if( mbedtls_ssl_ciphersuite_uses_psk( suite_info ) &&
mbedtls_ssl_conf_has_static_psk( ssl->conf ) == 0 )
{
return( -1 );
}
#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
return( 0 );
}
#endif /* MBEDTLS_SSL_TLS_C */