2011-05-09 18:17:09 +02:00
/*
* Error message information
*
2015-07-27 11:11:48 +02:00
* Copyright ( C ) 2006 - 2015 , ARM Limited , All Rights Reserved
2015-09-04 14:21:07 +02:00
* SPDX - License - Identifier : Apache - 2.0
2011-05-09 18:17:09 +02:00
*
2015-09-04 14:21:07 +02:00
* Licensed under the Apache License , Version 2.0 ( the " License " ) ; you may
* not use this file except in compliance with the License .
* You may obtain a copy of the License at
2011-05-09 18:17:09 +02:00
*
2015-09-04 14:21:07 +02:00
* http : //www.apache.org/licenses/LICENSE-2.0
2011-05-09 18:17:09 +02:00
*
2015-09-04 14:21:07 +02:00
* Unless required by applicable law or agreed to in writing , software
* distributed under the License is distributed on an " AS IS " BASIS , WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND , either express or implied .
* See the License for the specific language governing permissions and
* limitations under the License .
2011-05-09 18:17:09 +02:00
*
2015-09-04 14:21:07 +02:00
* This file is part of mbed TLS ( https : //tls.mbed.org)
2011-05-09 18:17:09 +02:00
*/
2015-04-08 12:49:31 +02:00
# if !defined(MBEDTLS_CONFIG_FILE)
2015-03-09 18:05:11 +01:00
# include "mbedtls/config.h"
2014-04-29 12:39:06 +02:00
# else
2015-04-08 12:49:31 +02:00
# include MBEDTLS_CONFIG_FILE
2014-04-29 12:39:06 +02:00
# endif
2011-05-09 18:17:09 +02:00
2019-12-18 14:16:46 +01:00
# if defined(MBEDTLS_ERROR_STRERROR_DUMMY)
2015-02-06 14:43:58 +01:00
# include <string.h>
2014-06-25 12:22:59 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_PLATFORM_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/platform.h"
2015-02-13 16:18:33 +01:00
# else
2015-04-08 12:49:31 +02:00
# define mbedtls_snprintf snprintf
2016-05-26 11:07:49 +02:00
# define mbedtls_time_t time_t
2014-06-25 12:22:59 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_ERROR_C)
2013-06-24 19:03:14 +02:00
2015-02-06 14:43:58 +01:00
# include <stdio.h>
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_AES_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/aes.h"
2011-05-09 18:17:09 +02:00
# endif
2018-01-26 17:56:38 +01:00
# if defined(MBEDTLS_ARC4_C)
# include "mbedtls/arc4.h"
# endif
2017-12-01 17:20:15 +01:00
# if defined(MBEDTLS_ARIA_C)
# include "mbedtls/aria.h"
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_BASE64_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/base64.h"
2011-05-09 18:17:09 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_BIGNUM_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/bignum.h"
2011-05-09 18:17:09 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_BLOWFISH_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/blowfish.h"
2012-07-04 13:08:50 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_CAMELLIA_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/camellia.h"
2011-05-09 18:17:09 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_CCM_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/ccm.h"
2014-05-02 15:17:29 +02:00
# endif
2016-05-15 22:28:08 +02:00
# if defined(MBEDTLS_CHACHA20_C)
# include "mbedtls/chacha20.h"
# endif
2018-05-07 10:43:27 +02:00
# if defined(MBEDTLS_CHACHAPOLY_C)
# include "mbedtls/chachapoly.h"
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_CIPHER_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/cipher.h"
2011-06-09 17:42:02 +02:00
# endif
2018-01-26 17:56:38 +01:00
# if defined(MBEDTLS_CMAC_C)
# include "mbedtls/cmac.h"
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_CTR_DRBG_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/ctr_drbg.h"
2011-11-27 15:50:49 +01:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_DES_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/des.h"
2011-05-09 18:17:09 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_DHM_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/dhm.h"
2011-05-09 18:17:09 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_ECP_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/ecp.h"
2013-01-16 17:00:43 +01:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_ENTROPY_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/entropy.h"
2011-12-03 22:45:14 +01:00
# endif
2019-12-03 16:55:56 +01:00
# if defined(MBEDTLS_ERROR_C)
# include "mbedtls/error.h"
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_GCM_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/gcm.h"
2012-04-17 14:24:26 +02:00
# endif
2016-07-17 09:51:22 +02:00
# if defined(MBEDTLS_HKDF_C)
# include "mbedtls/hkdf.h"
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_HMAC_DRBG_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/hmac_drbg.h"
2014-02-01 10:22:21 +01:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_MD_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/md.h"
2011-05-09 18:17:09 +02:00
# endif
2018-01-23 18:16:11 +01:00
# if defined(MBEDTLS_MD2_C)
# include "mbedtls/md2.h"
# endif
# if defined(MBEDTLS_MD4_C)
# include "mbedtls/md4.h"
# endif
# if defined(MBEDTLS_MD5_C)
# include "mbedtls/md5.h"
# endif
2020-02-26 18:28:28 +01:00
# if defined(MBEDTLS_NET_C)
# include "mbedtls/net_sockets.h"
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_OID_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/oid.h"
2013-04-07 22:00:46 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_PADLOCK_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/padlock.h"
2011-05-09 18:17:09 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_PEM_PARSE_C) || defined(MBEDTLS_PEM_WRITE_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/pem.h"
2011-05-09 18:17:09 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_PK_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/pk.h"
2013-07-09 10:04:07 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_PKCS12_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/pkcs12.h"
2013-06-24 19:17:19 +02:00
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_PKCS5_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/pkcs5.h"
2013-06-24 19:26:38 +02:00
# endif
2018-08-29 17:53:20 +02:00
# if defined(MBEDTLS_PLATFORM_C)
# include "mbedtls/platform.h"
# endif
2016-05-16 23:25:45 +02:00
# if defined(MBEDTLS_POLY1305_C)
# include "mbedtls/poly1305.h"
# endif
2018-01-23 18:16:11 +01:00
# if defined(MBEDTLS_RIPEMD160_C)
# include "mbedtls/ripemd160.h"
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_RSA_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/rsa.h"
2011-05-09 18:17:09 +02:00
# endif
2018-01-23 18:16:11 +01:00
# if defined(MBEDTLS_SHA1_C)
# include "mbedtls/sha1.h"
# endif
# if defined(MBEDTLS_SHA256_C)
# include "mbedtls/sha256.h"
# endif
# if defined(MBEDTLS_SHA512_C)
# include "mbedtls/sha512.h"
# endif
2020-02-26 18:28:28 +01:00
# if defined(MBEDTLS_SSL_TLS_C)
# include "mbedtls/ssl.h"
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_THREADING_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/threading.h"
2013-09-28 14:40:38 +02:00
# endif
2020-02-26 18:28:28 +01:00
# if defined(MBEDTLS_X509_USE_C) || defined(MBEDTLS_X509_CREATE_C)
# include "mbedtls/x509.h"
# endif
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_XTEA_C)
2015-03-09 18:05:11 +01:00
# include "mbedtls/xtea.h"
2011-05-09 18:17:09 +02:00
# endif
2011-11-15 17:38:34 +01:00
2020-04-09 10:44:52 +02:00
typedef struct mbedtls_error
2011-05-09 18:17:09 +02:00
{
2020-04-09 10:44:52 +02:00
int code ; /* Error code. */
const char * description ; /* Error description. */
} mbedtls_error_t ;
2011-05-09 18:17:09 +02:00
2020-04-09 10:44:52 +02:00
static mbedtls_error_t high_level_errors [ ] =
{
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_CIPHER_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE ) , . description = " CIPHER - The selected feature is not available " } ,
{ . code = - ( MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA ) , . description = " CIPHER - Bad input parameters " } ,
{ . code = - ( MBEDTLS_ERR_CIPHER_ALLOC_FAILED ) , . description = " CIPHER - Failed to allocate memory " } ,
{ . code = - ( MBEDTLS_ERR_CIPHER_INVALID_PADDING ) , . description = " CIPHER - Input data contains invalid padding and is rejected " } ,
{ . code = - ( MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED ) , . description = " CIPHER - Decryption of block requires a full block " } ,
{ . code = - ( MBEDTLS_ERR_CIPHER_AUTH_FAILED ) , . description = " CIPHER - Authentication failed (for AEAD modes) " } ,
{ . code = - ( MBEDTLS_ERR_CIPHER_INVALID_CONTEXT ) , . description = " CIPHER - The context is invalid. For example, because it was freed " } ,
{ . code = - ( MBEDTLS_ERR_CIPHER_HW_ACCEL_FAILED ) , . description = " CIPHER - Cipher hardware accelerator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_CIPHER_C */
# if defined(MBEDTLS_DHM_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_DHM_BAD_INPUT_DATA ) , . description = " DHM - Bad input parameters " } ,
{ . code = - ( MBEDTLS_ERR_DHM_READ_PARAMS_FAILED ) , . description = " DHM - Reading of the DHM parameters failed " } ,
{ . code = - ( MBEDTLS_ERR_DHM_MAKE_PARAMS_FAILED ) , . description = " DHM - Making of the DHM parameters failed " } ,
{ . code = - ( MBEDTLS_ERR_DHM_READ_PUBLIC_FAILED ) , . description = " DHM - Reading of the public values failed " } ,
{ . code = - ( MBEDTLS_ERR_DHM_MAKE_PUBLIC_FAILED ) , . description = " DHM - Making of the public value failed " } ,
{ . code = - ( MBEDTLS_ERR_DHM_CALC_SECRET_FAILED ) , . description = " DHM - Calculation of the DHM secret failed " } ,
{ . code = - ( MBEDTLS_ERR_DHM_INVALID_FORMAT ) , . description = " DHM - The ASN.1 data is not formatted correctly " } ,
{ . code = - ( MBEDTLS_ERR_DHM_ALLOC_FAILED ) , . description = " DHM - Allocation of memory failed " } ,
{ . code = - ( MBEDTLS_ERR_DHM_FILE_IO_ERROR ) , . description = " DHM - Read or write of file failed " } ,
{ . code = - ( MBEDTLS_ERR_DHM_HW_ACCEL_FAILED ) , . description = " DHM - DHM hardware accelerator failed " } ,
{ . code = - ( MBEDTLS_ERR_DHM_SET_GROUP_FAILED ) , . description = " DHM - Setting the modulus and generator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_DHM_C */
# if defined(MBEDTLS_ECP_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_ECP_BAD_INPUT_DATA ) , . description = " ECP - Bad input parameters to function " } ,
{ . code = - ( MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL ) , . description = " ECP - The buffer is too small to write to " } ,
{ . code = - ( MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE ) , . description = " ECP - The requested feature is not available, for example, the requested curve is not supported " } ,
{ . code = - ( MBEDTLS_ERR_ECP_VERIFY_FAILED ) , . description = " ECP - The signature is not valid " } ,
{ . code = - ( MBEDTLS_ERR_ECP_ALLOC_FAILED ) , . description = " ECP - Memory allocation failed " } ,
{ . code = - ( MBEDTLS_ERR_ECP_RANDOM_FAILED ) , . description = " ECP - Generation of random value, such as ephemeral key, failed " } ,
{ . code = - ( MBEDTLS_ERR_ECP_INVALID_KEY ) , . description = " ECP - Invalid private or public key " } ,
{ . code = - ( MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH ) , . description = " ECP - The buffer contains a valid signature followed by more data " } ,
{ . code = - ( MBEDTLS_ERR_ECP_HW_ACCEL_FAILED ) , . description = " ECP - The ECP hardware accelerator failed " } ,
{ . code = - ( MBEDTLS_ERR_ECP_IN_PROGRESS ) , . description = " ECP - Operation in progress, call again with the same parameters to continue " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_ECP_C */
# if defined(MBEDTLS_MD_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_MD_FEATURE_UNAVAILABLE ) , . description = " MD - The selected feature is not available " } ,
{ . code = - ( MBEDTLS_ERR_MD_BAD_INPUT_DATA ) , . description = " MD - Bad input parameters to function " } ,
{ . code = - ( MBEDTLS_ERR_MD_ALLOC_FAILED ) , . description = " MD - Failed to allocate memory " } ,
{ . code = - ( MBEDTLS_ERR_MD_FILE_IO_ERROR ) , . description = " MD - Opening or reading of file failed " } ,
{ . code = - ( MBEDTLS_ERR_MD_HW_ACCEL_FAILED ) , . description = " MD - MD hardware accelerator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_MD_C */
# if defined(MBEDTLS_PEM_PARSE_C) || defined(MBEDTLS_PEM_WRITE_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT ) , . description = " PEM - No PEM header or footer found " } ,
{ . code = - ( MBEDTLS_ERR_PEM_INVALID_DATA ) , . description = " PEM - PEM string is not as expected " } ,
{ . code = - ( MBEDTLS_ERR_PEM_ALLOC_FAILED ) , . description = " PEM - Failed to allocate memory " } ,
{ . code = - ( MBEDTLS_ERR_PEM_INVALID_ENC_IV ) , . description = " PEM - RSA IV is not in hex-format " } ,
{ . code = - ( MBEDTLS_ERR_PEM_UNKNOWN_ENC_ALG ) , . description = " PEM - Unsupported key encryption algorithm " } ,
{ . code = - ( MBEDTLS_ERR_PEM_PASSWORD_REQUIRED ) , . description = " PEM - Private key password can't be empty " } ,
{ . code = - ( MBEDTLS_ERR_PEM_PASSWORD_MISMATCH ) , . description = " PEM - Given private key password does not allow for correct decryption " } ,
{ . code = - ( MBEDTLS_ERR_PEM_FEATURE_UNAVAILABLE ) , . description = " PEM - Unavailable feature, e.g. hashing/encryption combination " } ,
{ . code = - ( MBEDTLS_ERR_PEM_BAD_INPUT_DATA ) , . description = " PEM - Bad input parameters to function " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_PEM_PARSE_C || MBEDTLS_PEM_WRITE_C */
# if defined(MBEDTLS_PK_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_PK_ALLOC_FAILED ) , . description = " PK - Memory allocation failed " } ,
{ . code = - ( MBEDTLS_ERR_PK_TYPE_MISMATCH ) , . description = " PK - Type mismatch, eg attempt to encrypt with an ECDSA key " } ,
{ . code = - ( MBEDTLS_ERR_PK_BAD_INPUT_DATA ) , . description = " PK - Bad input parameters to function " } ,
{ . code = - ( MBEDTLS_ERR_PK_FILE_IO_ERROR ) , . description = " PK - Read/write of file failed " } ,
{ . code = - ( MBEDTLS_ERR_PK_KEY_INVALID_VERSION ) , . description = " PK - Unsupported key version " } ,
{ . code = - ( MBEDTLS_ERR_PK_KEY_INVALID_FORMAT ) , . description = " PK - Invalid key tag or value " } ,
{ . code = - ( MBEDTLS_ERR_PK_UNKNOWN_PK_ALG ) , . description = " PK - Key algorithm is unsupported (only RSA and EC are supported) " } ,
{ . code = - ( MBEDTLS_ERR_PK_PASSWORD_REQUIRED ) , . description = " PK - Private key password can't be empty " } ,
{ . code = - ( MBEDTLS_ERR_PK_PASSWORD_MISMATCH ) , . description = " PK - Given private key password does not allow for correct decryption " } ,
{ . code = - ( MBEDTLS_ERR_PK_INVALID_PUBKEY ) , . description = " PK - The pubkey tag or value is invalid (only RSA and EC are supported) " } ,
{ . code = - ( MBEDTLS_ERR_PK_INVALID_ALG ) , . description = " PK - The algorithm tag or value is invalid " } ,
{ . code = - ( MBEDTLS_ERR_PK_UNKNOWN_NAMED_CURVE ) , . description = " PK - Elliptic curve is unsupported (only NIST curves are supported) " } ,
{ . code = - ( MBEDTLS_ERR_PK_FEATURE_UNAVAILABLE ) , . description = " PK - Unavailable feature, e.g. RSA disabled for RSA key " } ,
{ . code = - ( MBEDTLS_ERR_PK_SIG_LEN_MISMATCH ) , . description = " PK - The buffer contains a valid signature followed by more data " } ,
{ . code = - ( MBEDTLS_ERR_PK_HW_ACCEL_FAILED ) , . description = " PK - PK hardware accelerator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_PK_C */
# if defined(MBEDTLS_PKCS12_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_PKCS12_BAD_INPUT_DATA ) , . description = " PKCS12 - Bad input parameters to function " } ,
{ . code = - ( MBEDTLS_ERR_PKCS12_FEATURE_UNAVAILABLE ) , . description = " PKCS12 - Feature not available, e.g. unsupported encryption scheme " } ,
{ . code = - ( MBEDTLS_ERR_PKCS12_PBE_INVALID_FORMAT ) , . description = " PKCS12 - PBE ASN.1 data not as expected " } ,
{ . code = - ( MBEDTLS_ERR_PKCS12_PASSWORD_MISMATCH ) , . description = " PKCS12 - Given private key password does not allow for correct decryption " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_PKCS12_C */
# if defined(MBEDTLS_PKCS5_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_PKCS5_BAD_INPUT_DATA ) , . description = " PKCS5 - Bad input parameters to function " } ,
{ . code = - ( MBEDTLS_ERR_PKCS5_INVALID_FORMAT ) , . description = " PKCS5 - Unexpected ASN.1 data " } ,
{ . code = - ( MBEDTLS_ERR_PKCS5_FEATURE_UNAVAILABLE ) , . description = " PKCS5 - Requested encryption or digest alg not available " } ,
{ . code = - ( MBEDTLS_ERR_PKCS5_PASSWORD_MISMATCH ) , . description = " PKCS5 - Given private key password does not allow for correct decryption " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_PKCS5_C */
# if defined(MBEDTLS_RSA_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ) , . description = " RSA - Bad input parameters to function " } ,
{ . code = - ( MBEDTLS_ERR_RSA_INVALID_PADDING ) , . description = " RSA - Input data contains invalid padding and is rejected " } ,
{ . code = - ( MBEDTLS_ERR_RSA_KEY_GEN_FAILED ) , . description = " RSA - Something failed during generation of a key " } ,
{ . code = - ( MBEDTLS_ERR_RSA_KEY_CHECK_FAILED ) , . description = " RSA - Key failed to pass the validity check of the library " } ,
{ . code = - ( MBEDTLS_ERR_RSA_PUBLIC_FAILED ) , . description = " RSA - The public key operation failed " } ,
{ . code = - ( MBEDTLS_ERR_RSA_PRIVATE_FAILED ) , . description = " RSA - The private key operation failed " } ,
{ . code = - ( MBEDTLS_ERR_RSA_VERIFY_FAILED ) , . description = " RSA - The PKCS#1 verification failed " } ,
{ . code = - ( MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE ) , . description = " RSA - The output buffer for decryption is not large enough " } ,
{ . code = - ( MBEDTLS_ERR_RSA_RNG_FAILED ) , . description = " RSA - The random generator failed to generate non-zeros " } ,
{ . code = - ( MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION ) , . description = " RSA - The implementation does not offer the requested operation, for example, because of security violations or lack of functionality " } ,
{ . code = - ( MBEDTLS_ERR_RSA_HW_ACCEL_FAILED ) , . description = " RSA - RSA hardware accelerator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_RSA_C */
2020-02-26 18:28:28 +01:00
# if defined(MBEDTLS_SSL_TLS_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE ) , . description = " SSL - The requested feature is not available " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_INPUT_DATA ) , . description = " SSL - Bad input parameters to function " } ,
{ . code = - ( MBEDTLS_ERR_SSL_INVALID_MAC ) , . description = " SSL - Verification of the message MAC failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_INVALID_RECORD ) , . description = " SSL - An invalid SSL record was received " } ,
{ . code = - ( MBEDTLS_ERR_SSL_CONN_EOF ) , . description = " SSL - The connection indicated an EOF " } ,
{ . code = - ( MBEDTLS_ERR_SSL_UNKNOWN_CIPHER ) , . description = " SSL - An unknown cipher was received " } ,
{ . code = - ( MBEDTLS_ERR_SSL_NO_CIPHER_CHOSEN ) , . description = " SSL - The server has no ciphersuites in common with the client " } ,
{ . code = - ( MBEDTLS_ERR_SSL_NO_RNG ) , . description = " SSL - No RNG was provided to the SSL module " } ,
{ . code = - ( MBEDTLS_ERR_SSL_NO_CLIENT_CERTIFICATE ) , . description = " SSL - No client certification received from the client, but required by the authentication mode " } ,
{ . code = - ( MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE ) , . description = " SSL - Our own certificate(s) is/are too large to send in an SSL message " } ,
{ . code = - ( MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED ) , . description = " SSL - The own certificate is not set, but needed by the server " } ,
{ . code = - ( MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED ) , . description = " SSL - The own private key or pre-shared key is not set, but needed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_CA_CHAIN_REQUIRED ) , . description = " SSL - No CA Chain is set, but required to operate " } ,
{ . code = - ( MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE ) , . description = " SSL - An unexpected message was received from our peer " } ,
{ . code = - ( MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE ) , . description = " SSL - A fatal alert message was received from our peer " } ,
{ . code = - ( MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED ) , . description = " SSL - Verification of our peer failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY ) , . description = " SSL - The peer notified us that the connection is going to be closed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_CLIENT_HELLO ) , . description = " SSL - Processing of the ClientHello handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO ) , . description = " SSL - Processing of the ServerHello handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE ) , . description = " SSL - Processing of the Certificate handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST ) , . description = " SSL - Processing of the CertificateRequest handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE ) , . description = " SSL - Processing of the ServerKeyExchange handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO_DONE ) , . description = " SSL - Processing of the ServerHelloDone handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE ) , . description = " SSL - Processing of the ClientKeyExchange handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP ) , . description = " SSL - Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Read Public " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS ) , . description = " SSL - Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Calculate Secret " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY ) , . description = " SSL - Processing of the CertificateVerify handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC ) , . description = " SSL - Processing of the ChangeCipherSpec handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_FINISHED ) , . description = " SSL - Processing of the Finished handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_ALLOC_FAILED ) , . description = " SSL - Memory allocation failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED ) , . description = " SSL - Hardware acceleration function returned with error " } ,
{ . code = - ( MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH ) , . description = " SSL - Hardware acceleration function skipped / left alone data " } ,
{ . code = - ( MBEDTLS_ERR_SSL_COMPRESSION_FAILED ) , . description = " SSL - Processing of the compression / decompression failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_PROTOCOL_VERSION ) , . description = " SSL - Handshake protocol not within min/max boundaries " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BAD_HS_NEW_SESSION_TICKET ) , . description = " SSL - Processing of the NewSessionTicket handshake message failed " } ,
{ . code = - ( MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED ) , . description = " SSL - Session ticket has expired " } ,
{ . code = - ( MBEDTLS_ERR_SSL_PK_TYPE_MISMATCH ) , . description = " SSL - Public key type mismatch (eg, asked for RSA key exchange and presented EC key) " } ,
{ . code = - ( MBEDTLS_ERR_SSL_UNKNOWN_IDENTITY ) , . description = " SSL - Unknown identity received (eg, PSK identity) " } ,
{ . code = - ( MBEDTLS_ERR_SSL_INTERNAL_ERROR ) , . description = " SSL - Internal error (eg, unexpected failure in lower-level module) " } ,
{ . code = - ( MBEDTLS_ERR_SSL_COUNTER_WRAPPING ) , . description = " SSL - A counter would wrap (eg, too many messages exchanged) " } ,
{ . code = - ( MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO ) , . description = " SSL - Unexpected message at ServerHello in renegotiation " } ,
{ . code = - ( MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED ) , . description = " SSL - DTLS client must retry for hello verification " } ,
{ . code = - ( MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL ) , . description = " SSL - A buffer is too small to receive or write a message " } ,
{ . code = - ( MBEDTLS_ERR_SSL_NO_USABLE_CIPHERSUITE ) , . description = " SSL - None of the common ciphersuites is usable (eg, no suitable certificate, see debug messages) " } ,
{ . code = - ( MBEDTLS_ERR_SSL_WANT_READ ) , . description = " SSL - No data of requested type currently available on underlying transport " } ,
{ . code = - ( MBEDTLS_ERR_SSL_WANT_WRITE ) , . description = " SSL - Connection requires a write call " } ,
{ . code = - ( MBEDTLS_ERR_SSL_TIMEOUT ) , . description = " SSL - The operation timed out " } ,
{ . code = - ( MBEDTLS_ERR_SSL_CLIENT_RECONNECT ) , . description = " SSL - The client initiated a reconnect from the same port " } ,
{ . code = - ( MBEDTLS_ERR_SSL_UNEXPECTED_RECORD ) , . description = " SSL - Record header looks valid but is not expected " } ,
{ . code = - ( MBEDTLS_ERR_SSL_NON_FATAL ) , . description = " SSL - The alert message received indicates a non-fatal error " } ,
{ . code = - ( MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH ) , . description = " SSL - Couldn't set the hash for verifying CertificateVerify " } ,
{ . code = - ( MBEDTLS_ERR_SSL_CONTINUE_PROCESSING ) , . description = " SSL - Internal-only message signaling that further message-processing should be done " } ,
{ . code = - ( MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS ) , . description = " SSL - The asynchronous operation is not completed yet " } ,
{ . code = - ( MBEDTLS_ERR_SSL_EARLY_MESSAGE ) , . description = " SSL - Internal-only message signaling that a message arrived early " } ,
{ . code = - ( MBEDTLS_ERR_SSL_UNEXPECTED_CID ) , . description = " SSL - An encrypted DTLS-frame with an unexpected CID was received " } ,
{ . code = - ( MBEDTLS_ERR_SSL_VERSION_MISMATCH ) , . description = " SSL - An operation failed due to an unexpected version or configuration " } ,
{ . code = - ( MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) , . description = " SSL - A cryptographic operation is in progress. Try again later " } ,
2020-02-26 18:28:28 +01:00
# endif /* MBEDTLS_SSL_TLS_C */
# if defined(MBEDTLS_X509_USE_C) || defined(MBEDTLS_X509_CREATE_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_X509_FEATURE_UNAVAILABLE ) , . description = " X509 - Unavailable feature, e.g. RSA hashing/encryption combination " } ,
{ . code = - ( MBEDTLS_ERR_X509_UNKNOWN_OID ) , . description = " X509 - Requested OID is unknown " } ,
{ . code = - ( MBEDTLS_ERR_X509_INVALID_FORMAT ) , . description = " X509 - The CRT/CRL/CSR format is invalid, e.g. different type expected " } ,
{ . code = - ( MBEDTLS_ERR_X509_INVALID_VERSION ) , . description = " X509 - The CRT/CRL/CSR version element is invalid " } ,
{ . code = - ( MBEDTLS_ERR_X509_INVALID_SERIAL ) , . description = " X509 - The serial tag or value is invalid " } ,
{ . code = - ( MBEDTLS_ERR_X509_INVALID_ALG ) , . description = " X509 - The algorithm tag or value is invalid " } ,
{ . code = - ( MBEDTLS_ERR_X509_INVALID_NAME ) , . description = " X509 - The name tag or value is invalid " } ,
{ . code = - ( MBEDTLS_ERR_X509_INVALID_DATE ) , . description = " X509 - The date tag or value is invalid " } ,
{ . code = - ( MBEDTLS_ERR_X509_INVALID_SIGNATURE ) , . description = " X509 - The signature tag or value invalid " } ,
{ . code = - ( MBEDTLS_ERR_X509_INVALID_EXTENSIONS ) , . description = " X509 - The extension tag or value is invalid " } ,
{ . code = - ( MBEDTLS_ERR_X509_UNKNOWN_VERSION ) , . description = " X509 - CRT/CRL/CSR has an unsupported version number " } ,
{ . code = - ( MBEDTLS_ERR_X509_UNKNOWN_SIG_ALG ) , . description = " X509 - Signature algorithm (oid) is unsupported " } ,
{ . code = - ( MBEDTLS_ERR_X509_SIG_MISMATCH ) , . description = " X509 - Signature algorithms do not match. (see \\ c ::mbedtls_x509_crt sig_oid) " } ,
{ . code = - ( MBEDTLS_ERR_X509_CERT_VERIFY_FAILED ) , . description = " X509 - Certificate verification failed, e.g. CRL, CA or signature check failed " } ,
{ . code = - ( MBEDTLS_ERR_X509_CERT_UNKNOWN_FORMAT ) , . description = " X509 - Format not recognized as DER or PEM " } ,
{ . code = - ( MBEDTLS_ERR_X509_BAD_INPUT_DATA ) , . description = " X509 - Input invalid " } ,
{ . code = - ( MBEDTLS_ERR_X509_ALLOC_FAILED ) , . description = " X509 - Allocation of memory failed " } ,
{ . code = - ( MBEDTLS_ERR_X509_FILE_IO_ERROR ) , . description = " X509 - Read/write of file failed " } ,
{ . code = - ( MBEDTLS_ERR_X509_BUFFER_TOO_SMALL ) , . description = " X509 - Destination buffer is too small " } ,
{ . code = - ( MBEDTLS_ERR_X509_FATAL_ERROR ) , . description = " X509 - A fatal error occurred, eg the chain is too long or the vrfy callback failed " } ,
2020-02-26 18:28:28 +01:00
# endif /* MBEDTLS_X509_USE_C || MBEDTLS_X509_CREATE_C */
2020-04-09 10:44:52 +02:00
} ;
2013-08-25 11:21:30 +02:00
2020-04-09 10:44:52 +02:00
# define NUM_HIGH_LEVEL_ERRORS ( sizeof(high_level_errors) / sizeof(mbedtls_error_t) )
2011-05-09 18:17:09 +02:00
2020-04-09 10:44:52 +02:00
static mbedtls_error_t low_level_errors [ ] =
{
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_AES_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_AES_INVALID_KEY_LENGTH ) , . description = " AES - Invalid key length " } ,
{ . code = - ( MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH ) , . description = " AES - Invalid data input length " } ,
{ . code = - ( MBEDTLS_ERR_AES_BAD_INPUT_DATA ) , . description = " AES - Invalid input data " } ,
{ . code = - ( MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE ) , . description = " AES - Feature not available. For example, an unsupported AES key size " } ,
{ . code = - ( MBEDTLS_ERR_AES_HW_ACCEL_FAILED ) , . description = " AES - AES hardware accelerator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_AES_C */
2018-01-26 17:56:38 +01:00
# if defined(MBEDTLS_ARC4_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED ) , . description = " ARC4 - ARC4 hardware accelerator failed " } ,
2018-01-26 17:56:38 +01:00
# endif /* MBEDTLS_ARC4_C */
2017-12-01 17:20:15 +01:00
# if defined(MBEDTLS_ARIA_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_ARIA_BAD_INPUT_DATA ) , . description = " ARIA - Bad input data " } ,
{ . code = - ( MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH ) , . description = " ARIA - Invalid data input length " } ,
{ . code = - ( MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE ) , . description = " ARIA - Feature not available. For example, an unsupported ARIA key size " } ,
{ . code = - ( MBEDTLS_ERR_ARIA_HW_ACCEL_FAILED ) , . description = " ARIA - ARIA hardware accelerator failed " } ,
2017-12-01 17:20:15 +01:00
# endif /* MBEDTLS_ARIA_C */
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_ASN1_PARSE_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_ASN1_OUT_OF_DATA ) , . description = " ASN1 - Out of data when parsing an ASN1 data structure " } ,
{ . code = - ( MBEDTLS_ERR_ASN1_UNEXPECTED_TAG ) , . description = " ASN1 - ASN1 tag was of an unexpected value " } ,
{ . code = - ( MBEDTLS_ERR_ASN1_INVALID_LENGTH ) , . description = " ASN1 - Error when trying to determine the length or invalid length " } ,
{ . code = - ( MBEDTLS_ERR_ASN1_LENGTH_MISMATCH ) , . description = " ASN1 - Actual length differs from expected length " } ,
{ . code = - ( MBEDTLS_ERR_ASN1_INVALID_DATA ) , . description = " ASN1 - Data is invalid " } ,
{ . code = - ( MBEDTLS_ERR_ASN1_ALLOC_FAILED ) , . description = " ASN1 - Memory allocation failed " } ,
{ . code = - ( MBEDTLS_ERR_ASN1_BUF_TOO_SMALL ) , . description = " ASN1 - Buffer too small when writing ASN.1 data structure " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_ASN1_PARSE_C */
# if defined(MBEDTLS_BASE64_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL ) , . description = " BASE64 - Output buffer too small " } ,
{ . code = - ( MBEDTLS_ERR_BASE64_INVALID_CHARACTER ) , . description = " BASE64 - Invalid character in input " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_BASE64_C */
# if defined(MBEDTLS_BIGNUM_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_MPI_FILE_IO_ERROR ) , . description = " BIGNUM - An error occurred while reading from or writing to a file " } ,
{ . code = - ( MBEDTLS_ERR_MPI_BAD_INPUT_DATA ) , . description = " BIGNUM - Bad input parameters to function " } ,
{ . code = - ( MBEDTLS_ERR_MPI_INVALID_CHARACTER ) , . description = " BIGNUM - There is an invalid character in the digit string " } ,
{ . code = - ( MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL ) , . description = " BIGNUM - The buffer is too small to write to " } ,
{ . code = - ( MBEDTLS_ERR_MPI_NEGATIVE_VALUE ) , . description = " BIGNUM - The input arguments are negative or result in illegal output " } ,
{ . code = - ( MBEDTLS_ERR_MPI_DIVISION_BY_ZERO ) , . description = " BIGNUM - The input argument for division is zero, which is not allowed " } ,
{ . code = - ( MBEDTLS_ERR_MPI_NOT_ACCEPTABLE ) , . description = " BIGNUM - The input arguments are not acceptable " } ,
{ . code = - ( MBEDTLS_ERR_MPI_ALLOC_FAILED ) , . description = " BIGNUM - Memory allocation failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_BIGNUM_C */
# if defined(MBEDTLS_BLOWFISH_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA ) , . description = " BLOWFISH - Bad input data " } ,
{ . code = - ( MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH ) , . description = " BLOWFISH - Invalid data input length " } ,
{ . code = - ( MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED ) , . description = " BLOWFISH - Blowfish hardware accelerator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_BLOWFISH_C */
# if defined(MBEDTLS_CAMELLIA_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA ) , . description = " CAMELLIA - Bad input data " } ,
{ . code = - ( MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH ) , . description = " CAMELLIA - Invalid data input length " } ,
{ . code = - ( MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED ) , . description = " CAMELLIA - Camellia hardware accelerator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_CAMELLIA_C */
# if defined(MBEDTLS_CCM_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_CCM_BAD_INPUT ) , . description = " CCM - Bad input parameters to the function " } ,
{ . code = - ( MBEDTLS_ERR_CCM_AUTH_FAILED ) , . description = " CCM - Authenticated decryption failed " } ,
{ . code = - ( MBEDTLS_ERR_CCM_HW_ACCEL_FAILED ) , . description = " CCM - CCM hardware accelerator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_CCM_C */
2016-05-15 22:28:08 +02:00
# if defined(MBEDTLS_CHACHA20_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA ) , . description = " CHACHA20 - Invalid input parameter(s) " } ,
{ . code = - ( MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE ) , . description = " CHACHA20 - Feature not available. For example, s part of the API is not implemented " } ,
{ . code = - ( MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED ) , . description = " CHACHA20 - Chacha20 hardware accelerator failed " } ,
2016-05-15 22:28:08 +02:00
# endif /* MBEDTLS_CHACHA20_C */
2018-05-07 10:43:27 +02:00
# if defined(MBEDTLS_CHACHAPOLY_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_CHACHAPOLY_BAD_STATE ) , . description = " CHACHAPOLY - The requested operation is not permitted in the current state " } ,
{ . code = - ( MBEDTLS_ERR_CHACHAPOLY_AUTH_FAILED ) , . description = " CHACHAPOLY - Authenticated decryption failed: data was not authentic " } ,
2018-05-07 10:43:27 +02:00
# endif /* MBEDTLS_CHACHAPOLY_C */
2018-01-26 17:56:38 +01:00
# if defined(MBEDTLS_CMAC_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED ) , . description = " CMAC - CMAC hardware accelerator failed " } ,
2018-01-26 17:56:38 +01:00
# endif /* MBEDTLS_CMAC_C */
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_CTR_DRBG_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED ) , . description = " CTR_DRBG - The entropy source failed " } ,
{ . code = - ( MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG ) , . description = " CTR_DRBG - The requested random buffer length is too big " } ,
{ . code = - ( MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG ) , . description = " CTR_DRBG - The input (entropy + additional data) is too large " } ,
{ . code = - ( MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR ) , . description = " CTR_DRBG - Read or write error in file " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_CTR_DRBG_C */
# if defined(MBEDTLS_DES_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_DES_INVALID_INPUT_LENGTH ) , . description = " DES - The data input has an invalid length " } ,
{ . code = - ( MBEDTLS_ERR_DES_HW_ACCEL_FAILED ) , . description = " DES - DES hardware accelerator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_DES_C */
# if defined(MBEDTLS_ENTROPY_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_ENTROPY_SOURCE_FAILED ) , . description = " ENTROPY - Critical entropy source failure " } ,
{ . code = - ( MBEDTLS_ERR_ENTROPY_MAX_SOURCES ) , . description = " ENTROPY - No more sources can be added " } ,
{ . code = - ( MBEDTLS_ERR_ENTROPY_NO_SOURCES_DEFINED ) , . description = " ENTROPY - No sources have been added to poll " } ,
{ . code = - ( MBEDTLS_ERR_ENTROPY_NO_STRONG_SOURCE ) , . description = " ENTROPY - No strong sources have been added to poll " } ,
{ . code = - ( MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR ) , . description = " ENTROPY - Read/write error in file " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_ENTROPY_C */
2019-12-03 16:55:56 +01:00
# if defined(MBEDTLS_ERROR_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_ERROR_GENERIC_ERROR ) , . description = " ERROR - Generic error " } ,
{ . code = - ( MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED ) , . description = " ERROR - This is a bug in the library " } ,
2019-12-03 16:55:56 +01:00
# endif /* MBEDTLS_ERROR_C */
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_GCM_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_GCM_AUTH_FAILED ) , . description = " GCM - Authenticated decryption failed " } ,
{ . code = - ( MBEDTLS_ERR_GCM_HW_ACCEL_FAILED ) , . description = " GCM - GCM hardware accelerator failed " } ,
{ . code = - ( MBEDTLS_ERR_GCM_BAD_INPUT ) , . description = " GCM - Bad input parameters to function " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_GCM_C */
2016-07-17 09:51:22 +02:00
# if defined(MBEDTLS_HKDF_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_HKDF_BAD_INPUT_DATA ) , . description = " HKDF - Bad input parameters to function " } ,
2016-07-17 09:51:22 +02:00
# endif /* MBEDTLS_HKDF_C */
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_HMAC_DRBG_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG ) , . description = " HMAC_DRBG - Too many random requested in single call " } ,
{ . code = - ( MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG ) , . description = " HMAC_DRBG - Input too large (Entropy + additional) " } ,
{ . code = - ( MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR ) , . description = " HMAC_DRBG - Read/write error in file " } ,
{ . code = - ( MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED ) , . description = " HMAC_DRBG - The entropy source failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_HMAC_DRBG_C */
2018-01-23 18:16:11 +01:00
# if defined(MBEDTLS_MD2_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_MD2_HW_ACCEL_FAILED ) , . description = " MD2 - MD2 hardware accelerator failed " } ,
2018-01-23 18:16:11 +01:00
# endif /* MBEDTLS_MD2_C */
# if defined(MBEDTLS_MD4_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_MD4_HW_ACCEL_FAILED ) , . description = " MD4 - MD4 hardware accelerator failed " } ,
2018-01-23 18:16:11 +01:00
# endif /* MBEDTLS_MD4_C */
# if defined(MBEDTLS_MD5_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_MD5_HW_ACCEL_FAILED ) , . description = " MD5 - MD5 hardware accelerator failed " } ,
2018-01-23 18:16:11 +01:00
# endif /* MBEDTLS_MD5_C */
2020-02-26 18:28:28 +01:00
# if defined(MBEDTLS_NET_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_NET_SOCKET_FAILED ) , . description = " NET - Failed to open a socket " } ,
{ . code = - ( MBEDTLS_ERR_NET_CONNECT_FAILED ) , . description = " NET - The connection to the given server / port failed " } ,
{ . code = - ( MBEDTLS_ERR_NET_BIND_FAILED ) , . description = " NET - Binding of the socket failed " } ,
{ . code = - ( MBEDTLS_ERR_NET_LISTEN_FAILED ) , . description = " NET - Could not listen on the socket " } ,
{ . code = - ( MBEDTLS_ERR_NET_ACCEPT_FAILED ) , . description = " NET - Could not accept the incoming connection " } ,
{ . code = - ( MBEDTLS_ERR_NET_RECV_FAILED ) , . description = " NET - Reading information from the socket failed " } ,
{ . code = - ( MBEDTLS_ERR_NET_SEND_FAILED ) , . description = " NET - Sending information through the socket failed " } ,
{ . code = - ( MBEDTLS_ERR_NET_CONN_RESET ) , . description = " NET - Connection was reset by peer " } ,
{ . code = - ( MBEDTLS_ERR_NET_UNKNOWN_HOST ) , . description = " NET - Failed to get an IP address for the given hostname " } ,
{ . code = - ( MBEDTLS_ERR_NET_BUFFER_TOO_SMALL ) , . description = " NET - Buffer is too small to hold the data " } ,
{ . code = - ( MBEDTLS_ERR_NET_INVALID_CONTEXT ) , . description = " NET - The context is invalid, eg because it was free()ed " } ,
{ . code = - ( MBEDTLS_ERR_NET_POLL_FAILED ) , . description = " NET - Polling the net context failed " } ,
{ . code = - ( MBEDTLS_ERR_NET_BAD_INPUT_DATA ) , . description = " NET - Input invalid " } ,
2020-02-26 18:28:28 +01:00
# endif /* MBEDTLS_NET_C */
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_OID_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_OID_NOT_FOUND ) , . description = " OID - OID is not found " } ,
{ . code = - ( MBEDTLS_ERR_OID_BUF_TOO_SMALL ) , . description = " OID - output buffer is too small " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_OID_C */
# if defined(MBEDTLS_PADLOCK_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_PADLOCK_DATA_MISALIGNED ) , . description = " PADLOCK - Input data should be aligned " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_PADLOCK_C */
2018-08-29 17:53:20 +02:00
# if defined(MBEDTLS_PLATFORM_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED ) , . description = " PLATFORM - Hardware accelerator failed " } ,
{ . code = - ( MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED ) , . description = " PLATFORM - The requested feature is not supported by the platform " } ,
2018-08-29 17:53:20 +02:00
# endif /* MBEDTLS_PLATFORM_C */
2016-05-16 23:25:45 +02:00
# if defined(MBEDTLS_POLY1305_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA ) , . description = " POLY1305 - Invalid input parameter(s) " } ,
{ . code = - ( MBEDTLS_ERR_POLY1305_FEATURE_UNAVAILABLE ) , . description = " POLY1305 - Feature not available. For example, s part of the API is not implemented " } ,
{ . code = - ( MBEDTLS_ERR_POLY1305_HW_ACCEL_FAILED ) , . description = " POLY1305 - Poly1305 hardware accelerator failed " } ,
2016-05-16 23:25:45 +02:00
# endif /* MBEDTLS_POLY1305_C */
2018-01-23 18:16:11 +01:00
# if defined(MBEDTLS_RIPEMD160_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_RIPEMD160_HW_ACCEL_FAILED ) , . description = " RIPEMD160 - RIPEMD160 hardware accelerator failed " } ,
2018-01-23 18:16:11 +01:00
# endif /* MBEDTLS_RIPEMD160_C */
# if defined(MBEDTLS_SHA1_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_SHA1_HW_ACCEL_FAILED ) , . description = " SHA1 - SHA-1 hardware accelerator failed " } ,
{ . code = - ( MBEDTLS_ERR_SHA1_BAD_INPUT_DATA ) , . description = " SHA1 - SHA-1 input data was malformed " } ,
2018-01-23 18:16:11 +01:00
# endif /* MBEDTLS_SHA1_C */
# if defined(MBEDTLS_SHA256_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED ) , . description = " SHA256 - SHA-256 hardware accelerator failed " } ,
{ . code = - ( MBEDTLS_ERR_SHA256_BAD_INPUT_DATA ) , . description = " SHA256 - SHA-256 input data was malformed " } ,
2018-01-23 18:16:11 +01:00
# endif /* MBEDTLS_SHA256_C */
# if defined(MBEDTLS_SHA512_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED ) , . description = " SHA512 - SHA-512 hardware accelerator failed " } ,
{ . code = - ( MBEDTLS_ERR_SHA512_BAD_INPUT_DATA ) , . description = " SHA512 - SHA-512 input data was malformed " } ,
2018-01-23 18:16:11 +01:00
# endif /* MBEDTLS_SHA512_C */
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_THREADING_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_THREADING_FEATURE_UNAVAILABLE ) , . description = " THREADING - The selected feature is not available " } ,
{ . code = - ( MBEDTLS_ERR_THREADING_BAD_INPUT_DATA ) , . description = " THREADING - Bad input parameters to function " } ,
{ . code = - ( MBEDTLS_ERR_THREADING_MUTEX_ERROR ) , . description = " THREADING - Locking / unlocking / free failed with error code " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_THREADING_C */
# if defined(MBEDTLS_XTEA_C)
2020-04-09 10:44:52 +02:00
{ . code = - ( MBEDTLS_ERR_XTEA_INVALID_INPUT_LENGTH ) , . description = " XTEA - The data input has an invalid length " } ,
{ . code = - ( MBEDTLS_ERR_XTEA_HW_ACCEL_FAILED ) , . description = " XTEA - XTEA hardware accelerator failed " } ,
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_XTEA_C */
2020-04-09 10:44:52 +02:00
} ;
# define NUM_LOW_LEVEL_ERRORS ( sizeof(low_level_errors) / sizeof(mbedtls_error_t) )
const char * mbedtls_high_level_strerr ( int error_code )
{
size_t i ;
const char * error_description = NULL ;
for ( i = 0 ; i < NUM_HIGH_LEVEL_ERRORS ; i + + )
{
if ( high_level_errors [ i ] . code = = error_code )
{
error_description = high_level_errors [ i ] . description ;
break ;
}
}
return error_description ;
}
const char * mbedtls_low_level_strerr ( int error_code )
{
size_t i ;
const char * error_description = NULL ;
for ( i = 0 ; i < NUM_LOW_LEVEL_ERRORS ; i + + )
{
if ( low_level_errors [ i ] . code = = error_code )
{
error_description = low_level_errors [ i ] . description ;
break ;
}
}
return error_description ;
}
2011-05-09 18:17:09 +02:00
2020-04-09 10:44:52 +02:00
void mbedtls_strerror ( int ret , char * buf , size_t buflen )
{
size_t len ;
int use_ret ;
const char * high_level_error_description = NULL ;
const char * low_level_error_description = NULL ;
if ( buflen = = 0 )
2011-05-09 18:17:09 +02:00
return ;
2020-04-09 10:44:52 +02:00
memset ( buf , 0x00 , buflen ) ;
if ( ret < 0 )
ret = - ret ;
if ( ret & 0xFF80 )
{
use_ret = ret & 0xFF80 ;
// Translate high level error code.
high_level_error_description = mbedtls_high_level_strerr ( use_ret ) ;
if ( high_level_error_description = = NULL )
mbedtls_snprintf ( buf , buflen , " UNKNOWN ERROR CODE (%04X) " , use_ret ) ;
else
mbedtls_snprintf ( buf , buflen , " %s " , high_level_error_description ) ;
// Early return in case of a fatal error - do not try to translate low
// level code.
if ( use_ret = = - ( MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE ) )
return ;
}
use_ret = ret & ~ 0xFF80 ;
if ( use_ret = = 0 )
return ;
// If high level code is present, make a concatenation between both
// error strings.
//
len = strlen ( buf ) ;
if ( len > 0 )
{
if ( buflen - len < 5 )
return ;
mbedtls_snprintf ( buf + len , buflen - len , " : " ) ;
buf + = len + 3 ;
buflen - = len + 3 ;
}
// Translate low level error code.
low_level_error_description = mbedtls_low_level_strerr ( use_ret ) ;
if ( low_level_error_description = = NULL )
mbedtls_snprintf ( buf , buflen , " UNKNOWN ERROR CODE (%04X) " , use_ret ) ;
else
mbedtls_snprintf ( buf , buflen , " %s " , low_level_error_description ) ;
2011-05-09 18:17:09 +02:00
}
2015-04-08 12:49:31 +02:00
# else /* MBEDTLS_ERROR_C */
2013-02-02 12:43:08 +01:00
2015-04-08 12:49:31 +02:00
# if defined(MBEDTLS_ERROR_STRERROR_DUMMY)
2013-02-02 12:43:08 +01:00
/*
2015-04-08 12:49:31 +02:00
* Provide an non - function in case MBEDTLS_ERROR_C is not defined
2013-02-02 12:43:08 +01:00
*/
2015-04-08 12:49:31 +02:00
void mbedtls_strerror ( int ret , char * buf , size_t buflen )
2013-02-02 12:43:08 +01:00
{
( ( void ) ret ) ;
if ( buflen > 0 )
buf [ 0 ] = ' \0 ' ;
}
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_ERROR_STRERROR_DUMMY */
2013-06-29 18:24:32 +02:00
2015-04-08 12:49:31 +02:00
# endif /* MBEDTLS_ERROR_C */