mbedtls/include/psa/crypto.h

3347 lines
146 KiB
C
Raw Normal View History

/**
* \file psa/crypto.h
* \brief Platform Security Architecture cryptography module
*/
2018-07-25 14:26:13 +02:00
/*
* Copyright (C) 2018, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef PSA_CRYPTO_H
#define PSA_CRYPTO_H
#include "crypto_platform.h"
#include <stddef.h>
#ifdef __DOXYGEN_ONLY__
/* This __DOXYGEN_ONLY__ block contains mock definitions for things that
* must be defined in the crypto_platform.h header. These mock definitions
* are present in this file as a convenience to generate pretty-printed
* documentation that includes those definitions. */
/** \defgroup platform Implementation-specific definitions
* @{
*/
/** \brief Key handle.
*
* This type represents open handles to keys. It must be an unsigned integral
* type. The choice of type is implementation-dependent.
*
* 0 is not a valid key handle. How other handle values are assigned is
* implementation-dependent.
*/
typedef _unsigned_integral_type_ psa_key_handle_t;
/**@}*/
#endif /* __DOXYGEN_ONLY__ */
#ifdef __cplusplus
extern "C" {
#endif
/* The file "crypto_types.h" declares types that encode errors,
* algorithms, key types, policies, etc. */
#include "crypto_types.h"
/* The file "crypto_values.h" declares macros to build and analyze values
* of integral types defined in "crypto_types.h". */
#include "crypto_values.h"
/** \defgroup initialization Library initialization
* @{
*/
/**
* \brief Library initialization.
*
* Applications must call this function before calling any other
* function in this module.
*
* Applications may call this function more than once. Once a call
* succeeds, subsequent calls are guaranteed to succeed.
*
* If the application calls other functions before calling psa_crypto_init(),
* the behavior is undefined. Implementations are encouraged to either perform
* the operation as if the library had been initialized or to return
* #PSA_ERROR_BAD_STATE or some other applicable error. In particular,
* implementations should not return a success status if the lack of
* initialization may have security implications, for example due to improper
* seeding of the random number generator.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
*/
psa_status_t psa_crypto_init(void);
/**@}*/
/** \defgroup policy Key policies
* @{
*/
/** The type of the key policy data structure.
*
* Before calling any function on a key policy, the application must initialize
* it by any of the following means:
* - Set the structure to all-bits-zero, for example:
* \code
* psa_key_policy_t policy;
* memset(&policy, 0, sizeof(policy));
* \endcode
* - Initialize the structure to logical zero values, for example:
* \code
* psa_key_policy_t policy = {0};
* \endcode
* - Initialize the structure to the initializer #PSA_KEY_POLICY_INIT,
* for example:
* \code
* psa_key_policy_t policy = PSA_KEY_POLICY_INIT;
* \endcode
* - Assign the result of the function psa_key_policy_init()
* to the structure, for example:
* \code
* psa_key_policy_t policy;
* policy = psa_key_policy_init();
* \endcode
*
* This is an implementation-defined \c struct. Applications should not
* make any assumptions about the content of this structure except
* as directed by the documentation of a specific implementation. */
typedef struct psa_key_policy_s psa_key_policy_t;
/** \def PSA_KEY_POLICY_INIT
*
* This macro returns a suitable initializer for a key policy object of type
* #psa_key_policy_t.
*/
#ifdef __DOXYGEN_ONLY__
/* This is an example definition for documentation purposes.
* Implementations should define a suitable value in `crypto_struct.h`.
*/
#define PSA_KEY_POLICY_INIT {0}
#endif
/** Return an initial value for a key policy that forbids all usage of the key.
*/
static psa_key_policy_t psa_key_policy_init(void);
/** \brief Set the standard fields of a policy structure.
*
* Note that this function does not make any consistency check of the
* parameters. The values are only checked when applying the policy to
* a key slot with psa_set_key_policy().
*
* \param[in,out] policy The key policy to modify. It must have been
* initialized as per the documentation for
* #psa_key_policy_t.
* \param usage The permitted uses for the key.
* \param alg The algorithm that the key may be used for.
*/
void psa_key_policy_set_usage(psa_key_policy_t *policy,
psa_key_usage_t usage,
psa_algorithm_t alg);
/** \brief Retrieve the usage field of a policy structure.
*
* \param[in] policy The policy object to query.
*
* \return The permitted uses for a key with this policy.
*/
psa_key_usage_t psa_key_policy_get_usage(const psa_key_policy_t *policy);
/** \brief Retrieve the algorithm field of a policy structure.
*
* \param[in] policy The policy object to query.
*
* \return The permitted algorithm for a key with this policy.
*/
psa_algorithm_t psa_key_policy_get_algorithm(const psa_key_policy_t *policy);
/** \brief Set the usage policy on a key slot.
*
* This function must be called on an empty key slot, before importing,
* generating or creating a key in the slot. Changing the policy of an
* existing key is not permitted.
*
* Implementations may set restrictions on supported key policies
* depending on the key type and the key slot.
*
* \param handle Handle to the key whose policy is to be changed.
* \param[in] policy The policy object to query.
*
* \retval #PSA_SUCCESS
* Success.
* If the key is persistent, it is implementation-defined whether
* the policy has been saved to persistent storage. Implementations
* may defer saving the policy until the key material is created.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_OCCUPIED_SLOT
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_set_key_policy(psa_key_handle_t handle,
const psa_key_policy_t *policy);
/** \brief Get the usage policy for a key slot.
*
* \param handle Handle to the key slot whose policy is being queried.
* \param[out] policy On success, the key's policy.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_get_key_policy(psa_key_handle_t handle,
psa_key_policy_t *policy);
/**@}*/
/** \defgroup key_management Key management
* @{
*/
/** \brief Retrieve the lifetime of an open key.
*
* \param handle Handle to query.
* \param[out] lifetime On success, the lifetime value.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_get_key_lifetime(psa_key_handle_t handle,
psa_key_lifetime_t *lifetime);
/** Allocate a key slot for a transient key, i.e. a key which is only stored
* in volatile memory.
*
* The allocated key slot and its handle remain valid until the
* application calls psa_close_key() or psa_destroy_key() or until the
* application terminates.
*
* \param[out] handle On success, a handle to a volatile key slot.
*
* \retval #PSA_SUCCESS
* Success. The application can now use the value of `*handle`
* to access the newly allocated key slot.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* There was not enough memory, or the maximum number of key slots
* has been reached.
*/
psa_status_t psa_allocate_key(psa_key_handle_t *handle);
/** Open a handle to an existing persistent key.
*
* Open a handle to a key which was previously created with psa_create_key().
*
* \param lifetime The lifetime of the key. This designates a storage
* area where the key material is stored. This must not
* be #PSA_KEY_LIFETIME_VOLATILE.
* \param id The persistent identifier of the key.
* \param[out] handle On success, a handle to a key slot which contains
* the data and metadata loaded from the specified
* persistent location.
*
* \retval #PSA_SUCCESS
* Success. The application can now use the value of `*handle`
* to access the newly allocated key slot.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p lifetime is invalid, for example #PSA_KEY_LIFETIME_VOLATILE.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p id is invalid for the specified lifetime.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p lifetime is not supported.
* \retval #PSA_ERROR_NOT_PERMITTED
* The specified key exists, but the application does not have the
* permission to access it. Note that this specification does not
* define any way to create such a key, but it may be possible
* through implementation-specific means.
*/
psa_status_t psa_open_key(psa_key_lifetime_t lifetime,
psa_key_id_t id,
psa_key_handle_t *handle);
/** Create a new persistent key slot.
*
* Create a new persistent key slot and return a handle to it. The handle
* remains valid until the application calls psa_close_key() or terminates.
* The application can open the key again with psa_open_key() until it
* removes the key by calling psa_destroy_key().
*
* \param lifetime The lifetime of the key. This designates a storage
* area where the key material is stored. This must not
* be #PSA_KEY_LIFETIME_VOLATILE.
* \param id The persistent identifier of the key.
* \param[out] handle On success, a handle to the newly created key slot.
* When key material is later created in this key slot,
* it will be saved to the specified persistent location.
*
* \retval #PSA_SUCCESS
* Success. The application can now use the value of `*handle`
* to access the newly allocated key slot.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_INSUFFICIENT_STORAGE
* \retval #PSA_ERROR_OCCUPIED_SLOT
* There is already a key with the identifier \p id in the storage
* area designated by \p lifetime.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p lifetime is invalid, for example #PSA_KEY_LIFETIME_VOLATILE.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p id is invalid for the specified lifetime.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p lifetime is not supported.
* \retval #PSA_ERROR_NOT_PERMITTED
* \p lifetime is valid, but the application does not have the
* permission to create a key there.
*/
psa_status_t psa_create_key(psa_key_lifetime_t lifetime,
psa_key_id_t id,
psa_key_handle_t *handle);
/** Close a key handle.
*
* If the handle designates a volatile key, destroy the key material and
* free all associated resources, just like psa_destroy_key().
*
* If the handle designates a persistent key, free all resources associated
* with the key in volatile memory. The key slot in persistent storage is
* not affected and can be opened again later with psa_open_key().
*
* If the key is currently in use in a multipart operation,
* the multipart operation is aborted.
*
* \param handle The key handle to close.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
*/
psa_status_t psa_close_key(psa_key_handle_t handle);
/**@}*/
/** \defgroup import_export Key import and export
* @{
*/
/**
* \brief Import a key in binary format.
*
* This function supports any output from psa_export_key(). Refer to the
* documentation of psa_export_public_key() for the format of public keys
* and to the documentation of psa_export_key() for the format for
* other key types.
*
* This specification supports a single format for each key type.
* Implementations may support other formats as long as the standard
* format is supported. Implementations that support other formats
* should ensure that the formats are clearly unambiguous so as to
* minimize the risk that an invalid input is accidentally interpreted
* according to a different format.
*
* \param handle Handle to the slot where the key will be stored.
* It must have been obtained by calling
* psa_allocate_key() or psa_create_key() and must
* not contain key material yet.
* \param type Key type (a \c PSA_KEY_TYPE_XXX value). On a successful
* import, the key slot will contain a key of this type.
* \param[in] data Buffer containing the key data. The content of this
* buffer is interpreted according to \p type. It must
* contain the format described in the documentation
* of psa_export_key() or psa_export_public_key() for
* the chosen type.
* \param data_length Size of the \p data buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* If the key is persistent, the key material and the key's metadata
* have been saved to persistent storage.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_NOT_SUPPORTED
2018-04-19 08:28:58 +02:00
* The key type or key size is not supported, either by the
* implementation in general or in this particular slot.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The key slot is invalid,
* or the key data is not correctly formatted.
* \retval #PSA_ERROR_OCCUPIED_SLOT
2018-04-19 08:28:58 +02:00
* There is already a key in the specified slot.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_INSUFFICIENT_STORAGE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_STORAGE_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_import_key(psa_key_handle_t handle,
psa_key_type_t type,
const uint8_t *data,
size_t data_length);
/**
* \brief Destroy a key.
*
* This function destroys the content of the key slot from both volatile
* memory and, if applicable, non-volatile storage. Implementations shall
* make a best effort to ensure that any previous content of the slot is
* unrecoverable.
*
* This function also erases any metadata such as policies and frees all
* resources associated with the key.
*
* If the key is currently in use in a multipart operation,
* the multipart operation is aborted.
*
* \param handle Handle to the key slot to erase.
*
* \retval #PSA_SUCCESS
2018-04-19 08:28:58 +02:00
* The slot's content, if any, has been erased.
* \retval #PSA_ERROR_NOT_PERMITTED
2018-04-19 08:28:58 +02:00
* The slot holds content and cannot be erased because it is
* read-only, either due to a policy or due to physical restrictions.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
2018-04-19 08:28:58 +02:00
* There was an failure in communication with the cryptoprocessor.
* The key material may still be present in the cryptoprocessor.
* \retval #PSA_ERROR_STORAGE_FAILURE
2018-04-19 08:28:58 +02:00
* The storage is corrupted. Implementations shall make a best effort
* to erase key material even in this stage, however applications
* should be aware that it may be impossible to guarantee that the
* key material is not recoverable in such cases.
* \retval #PSA_ERROR_TAMPERING_DETECTED
2018-04-19 08:28:58 +02:00
* An unexpected condition which is not a storage corruption or
* a communication failure occurred. The cryptoprocessor may have
* been compromised.
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_destroy_key(psa_key_handle_t handle);
/**
* \brief Get basic metadata about a key.
*
* \param handle Handle to the key slot to query.
* \param[out] type On success, the key type (a \c PSA_KEY_TYPE_XXX value).
* This may be a null pointer, in which case the key type
* is not written.
* \param[out] bits On success, the key size in bits.
* This may be a null pointer, in which case the key size
* is not written.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* The handle is to a key slot which does not contain key material yet.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_get_key_information(psa_key_handle_t handle,
psa_key_type_t *type,
size_t *bits);
/**
* \brief Set domain parameters for a key.
*
* Some key types require additional domain parameters to be set before import
* or generation of the key. The domain parameters can be set with this
* function or, for key generation, through the \c extra parameter of
* psa_generate_key().
*
* The format for the required domain parameters varies by the key type.
* - For DSA public keys (#PSA_KEY_TYPE_DSA_PUBLIC_KEY),
* the `Dss-Parms` format as defined by RFC 3279 &sect;2.3.2.
* ```
* Dss-Parms ::= SEQUENCE {
* p INTEGER,
* q INTEGER,
* g INTEGER
* }
* ```
* - For Diffie-Hellman key exchange keys (#PSA_KEY_TYPE_DH_PUBLIC_KEY), the
* `DomainParameters` format as defined by RFC 3279 &sect;2.3.3.
* ```
* DomainParameters ::= SEQUENCE {
* p INTEGER, -- odd prime, p=jq +1
* g INTEGER, -- generator, g
* q INTEGER, -- factor of p-1
* j INTEGER OPTIONAL, -- subgroup factor
* validationParms ValidationParms OPTIONAL
* }
* ValidationParms ::= SEQUENCE {
* seed BIT STRING,
* pgenCounter INTEGER
* }
* ```
*
* \param handle Handle to the slot where the key will be stored.
* This must be a valid slot for a key of the chosen
* type: it must have been obtained by calling
* psa_allocate_key() or psa_create_key() with the
* correct \p type and with a maximum size that is
* compatible with \p data. It must not contain
* key material yet.
* \param type Key type (a \c PSA_KEY_TYPE_XXX value). When
* subsequently creating key material into \p handle,
* the type must be compatible.
* \param[in] data Buffer containing the key domain parameters. The content
* of this buffer is interpreted according to \p type. of
* psa_export_key() or psa_export_public_key() for the
* chosen type.
* \param data_length Size of the \p data buffer in bytes.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_OCCUPIED_SLOT
* There is already a key in the specified slot.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_set_key_domain_parameters(psa_key_handle_t handle,
psa_key_type_t type,
const uint8_t *data,
size_t data_length);
/**
* \brief Get domain parameters for a key.
*
* Get the domain parameters for a key with this function, if any. The format
* of the domain parameters written to \p data is specified in the
* documentation for psa_set_key_domain_parameters().
*
* \param handle Handle to the key to get domain parameters from.
* \param[out] data On success, the key domain parameters.
* \param data_size Size of the \p data buffer in bytes.
* \param[out] data_length On success, the number of bytes
* that make up the key domain parameters data.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* There is no key in the specified slot.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_get_key_domain_parameters(psa_key_handle_t handle,
uint8_t *data,
size_t data_size,
size_t *data_length);
/**
* \brief Export a key in binary format.
*
* The output of this function can be passed to psa_import_key() to
* create an equivalent object.
*
* If the implementation of psa_import_key() supports other formats
* beyond the format specified here, the output from psa_export_key()
* must use the representation specified here, not the original
* representation.
*
* For standard key types, the output format is as follows:
*
* - For symmetric keys (including MAC keys), the format is the
* raw bytes of the key.
* - For DES, the key data consists of 8 bytes. The parity bits must be
* correct.
* - For Triple-DES, the format is the concatenation of the
* two or three DES keys.
2018-03-03 21:29:30 +01:00
* - For RSA key pairs (#PSA_KEY_TYPE_RSA_KEYPAIR), the format
* is the non-encrypted DER encoding of the representation defined by
* PKCS\#1 (RFC 8017) as `RSAPrivateKey`, version 0.
* ```
* RSAPrivateKey ::= SEQUENCE {
2018-08-11 01:17:53 +02:00
* version INTEGER, -- must be 0
* modulus INTEGER, -- n
* publicExponent INTEGER, -- e
* privateExponent INTEGER, -- d
* prime1 INTEGER, -- p
* prime2 INTEGER, -- q
* exponent1 INTEGER, -- d mod (p-1)
* exponent2 INTEGER, -- d mod (q-1)
* coefficient INTEGER, -- (inverse of q) mod p
* }
* ```
* - For DSA private keys (#PSA_KEY_TYPE_DSA_KEYPAIR), the format is the
* representation of the private key `x` as a big-endian byte string. The
* length of the byte string is the private key size in bytes (leading zeroes
* are not stripped).
* - For elliptic curve key pairs (key types for which
* #PSA_KEY_TYPE_IS_ECC_KEYPAIR is true), the format is
* a representation of the private value as a `ceiling(m/8)`-byte string
* where `m` is the bit size associated with the curve, i.e. the bit size
* of the order of the curve's coordinate field. This byte string is
* in little-endian order for Montgomery curves (curve types
* `PSA_ECC_CURVE_CURVEXXX`), and in big-endian order for Weierstrass
* curves (curve types `PSA_ECC_CURVE_SECTXXX`, `PSA_ECC_CURVE_SECPXXX`
* and `PSA_ECC_CURVE_BRAINPOOL_PXXX`).
* This is the content of the `privateKey` field of the `ECPrivateKey`
* format defined by RFC 5915.
* - For Diffie-Hellman key exchange key pairs (#PSA_KEY_TYPE_DH_KEYPAIR), the
* format is the representation of the private key `x` as a big-endian byte
* string. The length of the byte string is the private key size in bytes
* (leading zeroes are not stripped).
* - For public keys (key types for which #PSA_KEY_TYPE_IS_PUBLIC_KEY is
* true), the format is the same as for psa_export_public_key().
*
* \param handle Handle to the key to export.
* \param[out] data Buffer where the key data is to be written.
* \param data_size Size of the \p data buffer in bytes.
* \param[out] data_length On success, the number of bytes
* that make up the key data.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p data buffer is too small. You can determine a
* sufficient buffer size by calling
* #PSA_KEY_EXPORT_MAX_SIZE(\c type, \c bits)
* where \c type is the key type
* and \c bits is the key size in bits.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_export_key(psa_key_handle_t handle,
uint8_t *data,
size_t data_size,
size_t *data_length);
/**
* \brief Export a public key or the public part of a key pair in binary format.
*
* The output of this function can be passed to psa_import_key() to
* create an object that is equivalent to the public key.
*
* This specification supports a single format for each key type.
* Implementations may support other formats as long as the standard
* format is supported. Implementations that support other formats
* should ensure that the formats are clearly unambiguous so as to
* minimize the risk that an invalid input is accidentally interpreted
* according to a different format.
*
* For standard key types, the output format is as follows:
* - For RSA public keys (#PSA_KEY_TYPE_RSA_PUBLIC_KEY), the DER encoding of
* the representation defined by RFC 3279 &sect;2.3.1 as `RSAPublicKey`.
* ```
* RSAPublicKey ::= SEQUENCE {
* modulus INTEGER, -- n
* publicExponent INTEGER } -- e
* ```
* - For elliptic curve public keys (key types for which
* #PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY is true), the format is the uncompressed
* representation defined by SEC1 &sect;2.3.3 as the content of an ECPoint.
* Let `m` be the bit size associated with the curve, i.e. the bit size of
* `q` for a curve over `F_q`. The representation consists of:
* - The byte 0x04;
* - `x_P` as a `ceiling(m/8)`-byte string, big-endian;
* - `y_P` as a `ceiling(m/8)`-byte string, big-endian.
* - For DSA public keys (#PSA_KEY_TYPE_DSA_PUBLIC_KEY), the format is the
* representation of the public key `y = g^x mod p` as a big-endian byte
* string. The length of the byte string is the length of the base prime `p`
* in bytes.
* - For Diffie-Hellman key exchange public keys (#PSA_KEY_TYPE_DH_PUBLIC_KEY),
* the format is the representation of the public key `y = g^x mod p` as a
* big-endian byte string. The length of the byte string is the length of the
* base prime `p` in bytes.
*
* \param handle Handle to the key to export.
* \param[out] data Buffer where the key data is to be written.
* \param data_size Size of the \p data buffer in bytes.
* \param[out] data_length On success, the number of bytes
* that make up the key data.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The key is neither a public key nor a key pair.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p data buffer is too small. You can determine a
* sufficient buffer size by calling
* #PSA_KEY_EXPORT_MAX_SIZE(#PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(\c type), \c bits)
* where \c type is the key type
* and \c bits is the key size in bits.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_export_public_key(psa_key_handle_t handle,
uint8_t *data,
size_t data_size,
size_t *data_length);
/** Make a copy of a key.
*
* Copy key material from one location to another.
*
* This function is primarily useful to copy a key from one lifetime
* to another. The target key retains its lifetime and location.
*
* In an implementation where slots have different ownerships,
* this function may be used to share a key with a different party,
* subject to implementation-defined restrictions on key sharing.
* In this case \p constraint would typically prevent the recipient
* from exporting the key.
*
* The resulting key may only be used in a way that conforms to all
* three of: the policy of the source key, the policy previously set
* on the target, and the \p constraint parameter passed when calling
* this function.
* - The usage flags on the resulting key are the bitwise-and of the
* usage flags on the source policy, the previously-set target policy
* and the policy constraint.
* - If all three policies allow the same algorithm or wildcard-based
* algorithm policy, the resulting key has the same algorithm policy.
* - If one of the policies allows an algorithm and all the other policies
* either allow the same algorithm or a wildcard-based algorithm policy
* that includes this algorithm, the resulting key allows the same
* algorithm.
*
* The effect of this function on implementation-defined metadata is
* implementation-defined.
*
* \param source_handle The key to copy. It must be a handle to an
* occupied slot.
* \param target_handle A handle to the target slot. It must not contain
* key material yet.
* \param[in] constraint An optional policy constraint. If this parameter
* is non-null then the resulting key will conform
* to this policy in addition to the source policy
* and the policy already present on the target
* slot. If this parameter is null then the
* function behaves in the same way as if it was
* the target policy, i.e. only the source and
* target policies apply.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_OCCUPIED_SLOT
* \p target_handle already contains key material.
* \retval #PSA_ERROR_EMPTY_SLOT
* \p source_handle does not contain key material.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The policy constraints on the source, on the target and
* \p constraint are incompatible.
* \retval #PSA_ERROR_NOT_PERMITTED
* The source key is not exportable and its lifetime does not
* allow copying it to the target's lifetime.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_INSUFFICIENT_STORAGE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
2018-03-08 07:50:30 +01:00
*/
psa_status_t psa_copy_key(psa_key_handle_t source_handle,
psa_key_handle_t target_handle,
const psa_key_policy_t *constraint);
/**@}*/
/** \defgroup hash Message digests
* @{
*/
/** Calculate the hash (digest) of a message.
*
* \note To verify the hash of a message against an
* expected value, use psa_hash_compare() instead.
*
* \param alg The hash algorithm to compute (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_HASH(\p alg) is true).
* \param[in] input Buffer containing the message to hash.
* \param input_length Size of the \p input buffer in bytes.
* \param[out] hash Buffer where the hash is to be written.
* \param hash_size Size of the \p hash buffer in bytes.
* \param[out] hash_length On success, the number of bytes
* that make up the hash value. This is always
* #PSA_HASH_SIZE(\p alg).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not a hash algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_hash_compute(psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
uint8_t *hash,
size_t hash_size,
size_t *hash_length);
/** Calculate the hash (digest) of a message and compare it with a
* reference value.
*
* \param alg The hash algorithm to compute (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_HASH(\p alg) is true).
* \param[in] input Buffer containing the message to hash.
* \param input_length Size of the \p input buffer in bytes.
* \param[out] hash Buffer containing the expected hash value.
* \param hash_length Size of the \p hash buffer in bytes.
*
* \retval #PSA_SUCCESS
* The expected hash is identical to the actual hash of the input.
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The hash of the message was calculated successfully, but it
* differs from the expected hash.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not a hash algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_hash_compare(psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
const uint8_t *hash,
const size_t hash_length);
/** The type of the state data structure for multipart hash operations.
*
* Before calling any function on a hash operation object, the application must
* initialize it by any of the following means:
* - Set the structure to all-bits-zero, for example:
* \code
* psa_hash_operation_t operation;
* memset(&operation, 0, sizeof(operation));
* \endcode
* - Initialize the structure to logical zero values, for example:
* \code
* psa_hash_operation_t operation = {0};
* \endcode
* - Initialize the structure to the initializer #PSA_HASH_OPERATION_INIT,
* for example:
* \code
* psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT;
* \endcode
* - Assign the result of the function psa_hash_operation_init()
* to the structure, for example:
* \code
* psa_hash_operation_t operation;
* operation = psa_hash_operation_init();
* \endcode
*
2018-03-03 21:29:30 +01:00
* This is an implementation-defined \c struct. Applications should not
* make any assumptions about the content of this structure except
* as directed by the documentation of a specific implementation. */
typedef struct psa_hash_operation_s psa_hash_operation_t;
/** \def PSA_HASH_OPERATION_INIT
*
* This macro returns a suitable initializer for a hash operation object
* of type #psa_hash_operation_t.
*/
#ifdef __DOXYGEN_ONLY__
/* This is an example definition for documentation purposes.
* Implementations should define a suitable value in `crypto_struct.h`.
*/
#define PSA_HASH_OPERATION_INIT {0}
#endif
/** Return an initial value for a hash operation object.
*/
static psa_hash_operation_t psa_hash_operation_init(void);
/** Set up a multipart hash operation.
*
* The sequence of operations to calculate a hash (message digest)
* is as follows:
* -# Allocate an operation object which will be passed to all the functions
* listed here.
* -# Initialize the operation object with one of the methods described in the
* documentation for #psa_hash_operation_t, e.g. PSA_HASH_OPERATION_INIT.
* -# Call psa_hash_setup() to specify the algorithm.
* -# Call psa_hash_update() zero, one or more times, passing a fragment
* of the message each time. The hash that is calculated is the hash
* of the concatenation of these messages in order.
* -# To calculate the hash, call psa_hash_finish().
* To compare the hash with an expected value, call psa_hash_verify().
*
* The application may call psa_hash_abort() at any time after the operation
* has been initialized.
*
* After a successful call to psa_hash_setup(), the application must
* eventually terminate the operation. The following events terminate an
* operation:
* - A failed call to psa_hash_update().
2018-03-20 17:54:53 +01:00
* - A call to psa_hash_finish(), psa_hash_verify() or psa_hash_abort().
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized as per the documentation for
* #psa_hash_operation_t and not yet in use.
* \param alg The hash algorithm to compute (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_HASH(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not a hash algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_hash_setup(psa_hash_operation_t *operation,
psa_algorithm_t alg);
/** Add a message fragment to a multipart hash operation.
*
* The application must call psa_hash_setup() before calling this function.
*
* If this function returns an error status, the operation becomes inactive.
*
* \param[in,out] operation Active hash operation.
* \param[in] input Buffer containing the message fragment to hash.
* \param input_length Size of the \p input buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, or already completed).
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_hash_update(psa_hash_operation_t *operation,
const uint8_t *input,
size_t input_length);
/** Finish the calculation of the hash of a message.
*
* The application must call psa_hash_setup() before calling this function.
* This function calculates the hash of the message formed by concatenating
* the inputs passed to preceding calls to psa_hash_update().
*
* When this function returns, the operation becomes inactive.
*
* \warning Applications should not call this function if they expect
* a specific value for the hash. Call psa_hash_verify() instead.
* Beware that comparing integrity or authenticity data such as
* hash values with a function such as \c memcmp is risky
* because the time taken by the comparison may leak information
* about the hashed data which could allow an attacker to guess
* a valid hash and thereby bypass security controls.
*
* \param[in,out] operation Active hash operation.
* \param[out] hash Buffer where the hash is to be written.
* \param hash_size Size of the \p hash buffer in bytes.
* \param[out] hash_length On success, the number of bytes
* that make up the hash value. This is always
* #PSA_HASH_SIZE(\c alg) where \c alg is the
* hash algorithm that is calculated.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, or already completed).
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p hash buffer is too small. You can determine a
* sufficient buffer size by calling #PSA_HASH_SIZE(\c alg)
* where \c alg is the hash algorithm that is calculated.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_hash_finish(psa_hash_operation_t *operation,
uint8_t *hash,
size_t hash_size,
size_t *hash_length);
/** Finish the calculation of the hash of a message and compare it with
* an expected value.
*
* The application must call psa_hash_setup() before calling this function.
* This function calculates the hash of the message formed by concatenating
* the inputs passed to preceding calls to psa_hash_update(). It then
* compares the calculated hash with the expected hash passed as a
* parameter to this function.
*
* When this function returns, the operation becomes inactive.
*
2018-03-20 17:54:53 +01:00
* \note Implementations shall make the best effort to ensure that the
* comparison between the actual hash and the expected hash is performed
* in constant time.
*
* \param[in,out] operation Active hash operation.
* \param[in] hash Buffer containing the expected hash value.
* \param hash_length Size of the \p hash buffer in bytes.
*
* \retval #PSA_SUCCESS
* The expected hash is identical to the actual hash of the message.
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The hash of the message was calculated successfully, but it
* differs from the expected hash.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, or already completed).
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_hash_verify(psa_hash_operation_t *operation,
const uint8_t *hash,
size_t hash_length);
/** Abort a hash operation.
*
* Aborting an operation frees all associated resources except for the
* \p operation structure itself. Once aborted, the operation object
* can be reused for another operation by calling
* psa_hash_setup() again.
*
* You may call this function any time after the operation object has
* been initialized by any of the following methods:
* - A call to psa_hash_setup(), whether it succeeds or not.
* - Initializing the \c struct to all-bits-zero.
* - Initializing the \c struct to logical zeros, e.g.
* `psa_hash_operation_t operation = {0}`.
*
* In particular, calling psa_hash_abort() after the operation has been
* terminated by a call to psa_hash_abort(), psa_hash_finish() or
* psa_hash_verify() is safe and has no effect.
*
* \param[in,out] operation Initialized hash operation.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BAD_STATE
* \p operation is not an active hash operation.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_hash_abort(psa_hash_operation_t *operation);
/** Clone a hash operation.
*
* This function copies the state of an ongoing hash operation to
* a new operation object. In other words, this function is equivalent
* to calling psa_hash_setup() on \p target_operation with the same
* algorithm that \p source_operation was set up for, then
* psa_hash_update() on \p target_operation with the same input that
* that was passed to \p source_operation. After this function returns, the
* two objects are independent, i.e. subsequent calls involving one of
* the objects do not affect the other object.
*
* \param[in] source_operation The active hash operation to clone.
* \param[in,out] target_operation The operation object to set up.
* It must be initialized but not active.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BAD_STATE
* \p source_operation is not an active hash operation.
* \retval #PSA_ERROR_BAD_STATE
* \p target_operation is active.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_hash_clone(const psa_hash_operation_t *source_operation,
psa_hash_operation_t *target_operation);
/**@}*/
/** \defgroup MAC Message authentication codes
* @{
*/
/** Calculate the MAC (message authentication code) of a message.
*
* \note To verify the MAC of a message against an
* expected value, use psa_mac_verify() instead.
* Beware that comparing integrity or authenticity data such as
* MAC values with a function such as \c memcmp is risky
* because the time taken by the comparison may leak information
* about the MAC value which could allow an attacker to guess
* a valid MAC and thereby bypass security controls.
*
* \param handle Handle to the key to use for the operation.
* \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_MAC(\p alg) is true).
* \param[in] input Buffer containing the input message.
* \param input_length Size of the \p input buffer in bytes.
* \param[out] mac Buffer where the MAC value is to be written.
* \param mac_size Size of the \p mac buffer in bytes.
* \param[out] mac_length On success, the number of bytes
* that make up the MAC value.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not a MAC algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_mac_compute(psa_key_handle_t handle,
psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
uint8_t *mac,
size_t mac_size,
size_t *mac_length);
/** Calculate the MAC of a message and compare it with a reference value.
*
* \param handle Handle to the key to use for the operation.
* \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_MAC(\p alg) is true).
* \param[in] input Buffer containing the input message.
* \param input_length Size of the \p input buffer in bytes.
* \param[out] mac Buffer containing the expected MAC value.
* \param mac_length Size of the \p mac buffer in bytes.
*
* \retval #PSA_SUCCESS
* The expected MAC is identical to the actual MAC of the input.
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The MAC of the message was calculated successfully, but it
* differs from the expected value.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not a MAC algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_mac_verify(psa_key_handle_t handle,
psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
const uint8_t *mac,
const size_t mac_length);
/** The type of the state data structure for multipart MAC operations.
*
* Before calling any function on a MAC operation object, the application must
* initialize it by any of the following means:
* - Set the structure to all-bits-zero, for example:
* \code
* psa_mac_operation_t operation;
* memset(&operation, 0, sizeof(operation));
* \endcode
* - Initialize the structure to logical zero values, for example:
* \code
* psa_mac_operation_t operation = {0};
* \endcode
* - Initialize the structure to the initializer #PSA_MAC_OPERATION_INIT,
* for example:
* \code
* psa_mac_operation_t operation = PSA_MAC_OPERATION_INIT;
* \endcode
* - Assign the result of the function psa_mac_operation_init()
* to the structure, for example:
* \code
* psa_mac_operation_t operation;
* operation = psa_mac_operation_init();
* \endcode
*
2018-03-03 21:29:30 +01:00
* This is an implementation-defined \c struct. Applications should not
* make any assumptions about the content of this structure except
* as directed by the documentation of a specific implementation. */
typedef struct psa_mac_operation_s psa_mac_operation_t;
/** \def PSA_MAC_OPERATION_INIT
*
* This macro returns a suitable initializer for a MAC operation object of type
* #psa_mac_operation_t.
*/
#ifdef __DOXYGEN_ONLY__
/* This is an example definition for documentation purposes.
* Implementations should define a suitable value in `crypto_struct.h`.
*/
#define PSA_MAC_OPERATION_INIT {0}
#endif
/** Return an initial value for a MAC operation object.
*/
static psa_mac_operation_t psa_mac_operation_init(void);
/** Set up a multipart MAC calculation operation.
*
* This function sets up the calculation of the MAC
* (message authentication code) of a byte string.
* To verify the MAC of a message against an
* expected value, use psa_mac_verify_setup() instead.
*
* The sequence of operations to calculate a MAC is as follows:
* -# Allocate an operation object which will be passed to all the functions
* listed here.
* -# Initialize the operation object with one of the methods described in the
* documentation for #psa_mac_operation_t, e.g. PSA_MAC_OPERATION_INIT.
* -# Call psa_mac_sign_setup() to specify the algorithm and key.
* -# Call psa_mac_update() zero, one or more times, passing a fragment
* of the message each time. The MAC that is calculated is the MAC
* of the concatenation of these messages in order.
* -# At the end of the message, call psa_mac_sign_finish() to finish
* calculating the MAC value and retrieve it.
*
* The application may call psa_mac_abort() at any time after the operation
* has been initialized.
*
* After a successful call to psa_mac_sign_setup(), the application must
* eventually terminate the operation through one of the following methods:
* - A failed call to psa_mac_update().
* - A call to psa_mac_sign_finish() or psa_mac_abort().
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized as per the documentation for
* #psa_mac_operation_t and not yet in use.
* \param handle Handle to the key to use for the operation.
* It must remain valid until the operation
* terminates.
* \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_MAC(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not a MAC algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_mac_sign_setup(psa_mac_operation_t *operation,
psa_key_handle_t handle,
psa_algorithm_t alg);
/** Set up a multipart MAC verification operation.
*
* This function sets up the verification of the MAC
* (message authentication code) of a byte string against an expected value.
*
* The sequence of operations to verify a MAC is as follows:
* -# Allocate an operation object which will be passed to all the functions
* listed here.
* -# Initialize the operation object with one of the methods described in the
* documentation for #psa_mac_operation_t, e.g. PSA_MAC_OPERATION_INIT.
* -# Call psa_mac_verify_setup() to specify the algorithm and key.
* -# Call psa_mac_update() zero, one or more times, passing a fragment
* of the message each time. The MAC that is calculated is the MAC
* of the concatenation of these messages in order.
* -# At the end of the message, call psa_mac_verify_finish() to finish
* calculating the actual MAC of the message and verify it against
* the expected value.
*
* The application may call psa_mac_abort() at any time after the operation
* has been initialized.
*
* After a successful call to psa_mac_verify_setup(), the application must
* eventually terminate the operation through one of the following methods:
* - A failed call to psa_mac_update().
* - A call to psa_mac_verify_finish() or psa_mac_abort().
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized as per the documentation for
* #psa_mac_operation_t and not yet in use.
* \param handle Handle to the key to use for the operation.
* It must remain valid until the operation
* terminates.
* \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_MAC(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \c key is not compatible with \c alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \c alg is not supported or is not a MAC algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_mac_verify_setup(psa_mac_operation_t *operation,
psa_key_handle_t handle,
psa_algorithm_t alg);
/** Add a message fragment to a multipart MAC operation.
*
* The application must call psa_mac_sign_setup() or psa_mac_verify_setup()
* before calling this function.
*
* If this function returns an error status, the operation becomes inactive.
*
* \param[in,out] operation Active MAC operation.
* \param[in] input Buffer containing the message fragment to add to
* the MAC calculation.
* \param input_length Size of the \p input buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, or already completed).
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_mac_update(psa_mac_operation_t *operation,
const uint8_t *input,
size_t input_length);
/** Finish the calculation of the MAC of a message.
*
* The application must call psa_mac_sign_setup() before calling this function.
* This function calculates the MAC of the message formed by concatenating
* the inputs passed to preceding calls to psa_mac_update().
*
* When this function returns, the operation becomes inactive.
*
* \warning Applications should not call this function if they expect
* a specific value for the MAC. Call psa_mac_verify_finish() instead.
* Beware that comparing integrity or authenticity data such as
* MAC values with a function such as \c memcmp is risky
* because the time taken by the comparison may leak information
* about the MAC value which could allow an attacker to guess
* a valid MAC and thereby bypass security controls.
*
* \param[in,out] operation Active MAC operation.
* \param[out] mac Buffer where the MAC value is to be written.
* \param mac_size Size of the \p mac buffer in bytes.
* \param[out] mac_length On success, the number of bytes
* that make up the MAC value. This is always
2018-07-12 19:40:46 +02:00
* #PSA_MAC_FINAL_SIZE(\c key_type, \c key_bits, \c alg)
* where \c key_type and \c key_bits are the type and
2018-07-12 19:40:46 +02:00
* bit-size respectively of the key and \c alg is the
* MAC algorithm that is calculated.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, or already completed).
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p mac buffer is too small. You can determine a
* sufficient buffer size by calling PSA_MAC_FINAL_SIZE().
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_mac_sign_finish(psa_mac_operation_t *operation,
uint8_t *mac,
size_t mac_size,
size_t *mac_length);
/** Finish the calculation of the MAC of a message and compare it with
* an expected value.
*
* The application must call psa_mac_verify_setup() before calling this function.
* This function calculates the MAC of the message formed by concatenating
* the inputs passed to preceding calls to psa_mac_update(). It then
* compares the calculated MAC with the expected MAC passed as a
* parameter to this function.
*
* When this function returns, the operation becomes inactive.
*
* \note Implementations shall make the best effort to ensure that the
* comparison between the actual MAC and the expected MAC is performed
* in constant time.
*
* \param[in,out] operation Active MAC operation.
* \param[in] mac Buffer containing the expected MAC value.
* \param mac_length Size of the \p mac buffer in bytes.
*
* \retval #PSA_SUCCESS
* The expected MAC is identical to the actual MAC of the message.
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The MAC of the message was calculated successfully, but it
* differs from the expected MAC.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, or already completed).
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_mac_verify_finish(psa_mac_operation_t *operation,
const uint8_t *mac,
size_t mac_length);
/** Abort a MAC operation.
*
* Aborting an operation frees all associated resources except for the
* \p operation structure itself. Once aborted, the operation object
* can be reused for another operation by calling
* psa_mac_sign_setup() or psa_mac_verify_setup() again.
*
* You may call this function any time after the operation object has
* been initialized by any of the following methods:
* - A call to psa_mac_sign_setup() or psa_mac_verify_setup(), whether
* it succeeds or not.
* - Initializing the \c struct to all-bits-zero.
* - Initializing the \c struct to logical zeros, e.g.
* `psa_mac_operation_t operation = {0}`.
*
* In particular, calling psa_mac_abort() after the operation has been
* terminated by a call to psa_mac_abort(), psa_mac_sign_finish() or
* psa_mac_verify_finish() is safe and has no effect.
*
* \param[in,out] operation Initialized MAC operation.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BAD_STATE
* \p operation is not an active MAC operation.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_mac_abort(psa_mac_operation_t *operation);
/**@}*/
/** \defgroup cipher Symmetric ciphers
* @{
*/
/** Encrypt a message using a symmetric cipher.
*
* This function encrypts a message with a random IV (initialization
* vector).
*
* \param handle Handle to the key to use for the operation.
* It must remain valid until the operation
* terminates.
* \param alg The cipher algorithm to compute
* (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_CIPHER(\p alg) is true).
* \param[in] input Buffer containing the message to encrypt.
* \param input_length Size of the \p input buffer in bytes.
* \param[out] output Buffer where the output is to be written.
* The output contains the IV followed by
* the ciphertext proper.
* \param output_size Size of the \p output buffer in bytes.
* \param[out] output_length On success, the number of bytes
* that make up the output.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not a cipher algorithm.
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_cipher_encrypt(psa_key_handle_t handle,
psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
uint8_t *output,
size_t output_size,
size_t *output_length);
/** Decrypt a message using a symmetric cipher.
*
* This function decrypts a message encrypted with a symmetric cipher.
*
* \param handle Handle to the key to use for the operation.
* It must remain valid until the operation
* terminates.
* \param alg The cipher algorithm to compute
* (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_CIPHER(\p alg) is true).
* \param[in] input Buffer containing the message to decrypt.
* This consists of the IV followed by the
* ciphertext proper.
* \param input_length Size of the \p input buffer in bytes.
* \param[out] output Buffer where the plaintext is to be written.
* \param output_size Size of the \p output buffer in bytes.
* \param[out] output_length On success, the number of bytes
* that make up the output.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not a cipher algorithm.
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_cipher_decrypt(psa_key_handle_t handle,
psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
uint8_t *output,
size_t output_size,
size_t *output_length);
/** The type of the state data structure for multipart cipher operations.
*
* Before calling any function on a cipher operation object, the application
* must initialize it by any of the following means:
* - Set the structure to all-bits-zero, for example:
* \code
* psa_cipher_operation_t operation;
* memset(&operation, 0, sizeof(operation));
* \endcode
* - Initialize the structure to logical zero values, for example:
* \code
* psa_cipher_operation_t operation = {0};
* \endcode
* - Initialize the structure to the initializer #PSA_CIPHER_OPERATION_INIT,
* for example:
* \code
* psa_cipher_operation_t operation = PSA_CIPHER_OPERATION_INIT;
* \endcode
* - Assign the result of the function psa_cipher_operation_init()
* to the structure, for example:
* \code
* psa_cipher_operation_t operation;
* operation = psa_cipher_operation_init();
* \endcode
*
* This is an implementation-defined \c struct. Applications should not
* make any assumptions about the content of this structure except
* as directed by the documentation of a specific implementation. */
typedef struct psa_cipher_operation_s psa_cipher_operation_t;
/** \def PSA_CIPHER_OPERATION_INIT
*
* This macro returns a suitable initializer for a cipher operation object of
* type #psa_cipher_operation_t.
*/
#ifdef __DOXYGEN_ONLY__
/* This is an example definition for documentation purposes.
* Implementations should define a suitable value in `crypto_struct.h`.
*/
#define PSA_CIPHER_OPERATION_INIT {0}
#endif
/** Return an initial value for a cipher operation object.
*/
static psa_cipher_operation_t psa_cipher_operation_init(void);
/** Set the key for a multipart symmetric encryption operation.
*
* The sequence of operations to encrypt a message with a symmetric cipher
* is as follows:
* -# Allocate an operation object which will be passed to all the functions
* listed here.
* -# Initialize the operation object with one of the methods described in the
* documentation for #psa_cipher_operation_t, e.g.
* PSA_CIPHER_OPERATION_INIT.
* -# Call psa_cipher_encrypt_setup() to specify the algorithm and key.
* -# Call either psa_cipher_generate_iv() or psa_cipher_set_iv() to
* generate or set the IV (initialization vector). You should use
* psa_cipher_generate_iv() unless the protocol you are implementing
* requires a specific IV value.
* -# Call psa_cipher_update() zero, one or more times, passing a fragment
* of the message each time.
* -# Call psa_cipher_finish().
*
* The application may call psa_cipher_abort() at any time after the operation
* has been initialized.
*
* After a successful call to psa_cipher_encrypt_setup(), the application must
* eventually terminate the operation. The following events terminate an
* operation:
* - A failed call to any of the \c psa_cipher_xxx functions.
2018-03-20 17:54:53 +01:00
* - A call to psa_cipher_finish() or psa_cipher_abort().
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized as per the documentation for
* #psa_cipher_operation_t and not yet in use.
* \param handle Handle to the key to use for the operation.
* It must remain valid until the operation
* terminates.
* \param alg The cipher algorithm to compute
* (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_CIPHER(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not a cipher algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_cipher_encrypt_setup(psa_cipher_operation_t *operation,
psa_key_handle_t handle,
psa_algorithm_t alg);
/** Set the key for a multipart symmetric decryption operation.
*
* The sequence of operations to decrypt a message with a symmetric cipher
* is as follows:
* -# Allocate an operation object which will be passed to all the functions
* listed here.
* -# Initialize the operation object with one of the methods described in the
* documentation for #psa_cipher_operation_t, e.g.
* PSA_CIPHER_OPERATION_INIT.
* -# Call psa_cipher_decrypt_setup() to specify the algorithm and key.
* -# Call psa_cipher_set_iv() with the IV (initialization vector) for the
* decryption. If the IV is prepended to the ciphertext, you can call
* psa_cipher_update() on a buffer containing the IV followed by the
* beginning of the message.
* -# Call psa_cipher_update() zero, one or more times, passing a fragment
* of the message each time.
* -# Call psa_cipher_finish().
*
* The application may call psa_cipher_abort() at any time after the operation
* has been initialized.
*
* After a successful call to psa_cipher_decrypt_setup(), the application must
* eventually terminate the operation. The following events terminate an
* operation:
* - A failed call to any of the \c psa_cipher_xxx functions.
2018-03-20 17:54:53 +01:00
* - A call to psa_cipher_finish() or psa_cipher_abort().
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized as per the documentation for
* #psa_cipher_operation_t and not yet in use.
* \param handle Handle to the key to use for the operation.
* It must remain valid until the operation
* terminates.
* \param alg The cipher algorithm to compute
* (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_CIPHER(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not a cipher algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_cipher_decrypt_setup(psa_cipher_operation_t *operation,
psa_key_handle_t handle,
psa_algorithm_t alg);
/** Generate an IV for a symmetric encryption operation.
*
* This function generates a random IV (initialization vector), nonce
* or initial counter value for the encryption operation as appropriate
* for the chosen algorithm, key type and key size.
*
* The application must call psa_cipher_encrypt_setup() before
* calling this function.
*
* If this function returns an error status, the operation becomes inactive.
*
* \param[in,out] operation Active cipher operation.
* \param[out] iv Buffer where the generated IV is to be written.
* \param iv_size Size of the \p iv buffer in bytes.
* \param[out] iv_length On success, the number of bytes of the
* generated IV.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, or IV already set).
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
2018-07-12 19:40:46 +02:00
* The size of the \p iv buffer is too small.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_cipher_generate_iv(psa_cipher_operation_t *operation,
unsigned char *iv,
size_t iv_size,
size_t *iv_length);
/** Set the IV for a symmetric encryption or decryption operation.
*
* This function sets the IV (initialization vector), nonce
* or initial counter value for the encryption or decryption operation.
*
* The application must call psa_cipher_encrypt_setup() before
* calling this function.
*
* If this function returns an error status, the operation becomes inactive.
*
* \note When encrypting, applications should use psa_cipher_generate_iv()
* instead of this function, unless implementing a protocol that requires
* a non-random IV.
*
* \param[in,out] operation Active cipher operation.
* \param[in] iv Buffer containing the IV to use.
* \param iv_length Size of the IV in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, or IV already set).
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The size of \p iv is not acceptable for the chosen algorithm,
* or the chosen algorithm does not use an IV.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_cipher_set_iv(psa_cipher_operation_t *operation,
const unsigned char *iv,
size_t iv_length);
/** Encrypt or decrypt a message fragment in an active cipher operation.
*
* Before calling this function, you must:
* 1. Call either psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup().
* The choice of setup function determines whether this function
* encrypts or decrypts its input.
* 2. If the algorithm requires an IV, call psa_cipher_generate_iv()
* (recommended when encrypting) or psa_cipher_set_iv().
*
* If this function returns an error status, the operation becomes inactive.
*
* \param[in,out] operation Active cipher operation.
* \param[in] input Buffer containing the message fragment to
* encrypt or decrypt.
* \param input_length Size of the \p input buffer in bytes.
* \param[out] output Buffer where the output is to be written.
* \param output_size Size of the \p output buffer in bytes.
* \param[out] output_length On success, the number of bytes
* that make up the returned output.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, IV required but
* not set, or already completed).
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p output buffer is too small.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_cipher_update(psa_cipher_operation_t *operation,
const uint8_t *input,
size_t input_length,
unsigned char *output,
size_t output_size,
size_t *output_length);
/** Finish encrypting or decrypting a message in a cipher operation.
*
* The application must call psa_cipher_encrypt_setup() or
* psa_cipher_decrypt_setup() before calling this function. The choice
* of setup function determines whether this function encrypts or
* decrypts its input.
*
* This function finishes the encryption or decryption of the message
* formed by concatenating the inputs passed to preceding calls to
* psa_cipher_update().
*
* When this function returns, the operation becomes inactive.
*
* \param[in,out] operation Active cipher operation.
* \param[out] output Buffer where the output is to be written.
* \param output_size Size of the \p output buffer in bytes.
* \param[out] output_length On success, the number of bytes
* that make up the returned output.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, IV required but
* not set, or already completed).
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p output buffer is too small.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_cipher_finish(psa_cipher_operation_t *operation,
uint8_t *output,
size_t output_size,
size_t *output_length);
/** Abort a cipher operation.
*
* Aborting an operation frees all associated resources except for the
* \p operation structure itself. Once aborted, the operation object
* can be reused for another operation by calling
* psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup() again.
*
* You may call this function any time after the operation object has
* been initialized by any of the following methods:
* - A call to psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup(),
* whether it succeeds or not.
* - Initializing the \c struct to all-bits-zero.
* - Initializing the \c struct to logical zeros, e.g.
* `psa_cipher_operation_t operation = {0}`.
*
* In particular, calling psa_cipher_abort() after the operation has been
* terminated by a call to psa_cipher_abort() or psa_cipher_finish()
* is safe and has no effect.
*
* \param[in,out] operation Initialized cipher operation.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BAD_STATE
* \p operation is not an active cipher operation.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_cipher_abort(psa_cipher_operation_t *operation);
/**@}*/
/** \defgroup aead Authenticated encryption with associated data (AEAD)
* @{
*/
/** Process an authenticated encryption operation.
*
* \param handle Handle to the key to use for the operation.
* \param alg The AEAD algorithm to compute
* (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_AEAD(\p alg) is true).
* \param[in] nonce Nonce or IV to use.
* \param nonce_length Size of the \p nonce buffer in bytes.
* \param[in] additional_data Additional data that will be authenticated
* but not encrypted.
* \param additional_data_length Size of \p additional_data in bytes.
* \param[in] plaintext Data that will be authenticated and
* encrypted.
* \param plaintext_length Size of \p plaintext in bytes.
* \param[out] ciphertext Output buffer for the authenticated and
* encrypted data. The additional data is not
* part of this output. For algorithms where the
* encrypted data and the authentication tag
* are defined as separate outputs, the
* authentication tag is appended to the
* encrypted data.
* \param ciphertext_size Size of the \p ciphertext buffer in bytes.
* This must be at least
* #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\p alg,
* \p plaintext_length).
* \param[out] ciphertext_length On success, the size of the output
* in the \p ciphertext buffer.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not an AEAD algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_aead_encrypt(psa_key_handle_t handle,
2018-07-19 15:51:49 +02:00
psa_algorithm_t alg,
const uint8_t *nonce,
size_t nonce_length,
const uint8_t *additional_data,
size_t additional_data_length,
const uint8_t *plaintext,
size_t plaintext_length,
uint8_t *ciphertext,
size_t ciphertext_size,
size_t *ciphertext_length);
/** Process an authenticated decryption operation.
*
* \param handle Handle to the key to use for the operation.
* \param alg The AEAD algorithm to compute
* (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_AEAD(\p alg) is true).
* \param[in] nonce Nonce or IV to use.
* \param nonce_length Size of the \p nonce buffer in bytes.
* \param[in] additional_data Additional data that has been authenticated
* but not encrypted.
* \param additional_data_length Size of \p additional_data in bytes.
* \param[in] ciphertext Data that has been authenticated and
* encrypted. For algorithms where the
* encrypted data and the authentication tag
* are defined as separate inputs, the buffer
* must contain the encrypted data followed
* by the authentication tag.
* \param ciphertext_length Size of \p ciphertext in bytes.
* \param[out] plaintext Output buffer for the decrypted data.
* \param plaintext_size Size of the \p plaintext buffer in bytes.
* This must be at least
* #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\p alg,
* \p ciphertext_length).
* \param[out] plaintext_length On success, the size of the output
* in the \p plaintext buffer.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The ciphertext is not authentic.
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not an AEAD algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_aead_decrypt(psa_key_handle_t handle,
2018-07-19 15:51:49 +02:00
psa_algorithm_t alg,
const uint8_t *nonce,
size_t nonce_length,
const uint8_t *additional_data,
size_t additional_data_length,
const uint8_t *ciphertext,
size_t ciphertext_length,
uint8_t *plaintext,
size_t plaintext_size,
size_t *plaintext_length);
/** The type of the state data structure for multipart AEAD operations.
*
* Before calling any function on an AEAD operation object, the application
* must initialize it by any of the following means:
* - Set the structure to all-bits-zero, for example:
* \code
* psa_aead_operation_t operation;
* memset(&operation, 0, sizeof(operation));
* \endcode
* - Initialize the structure to logical zero values, for example:
* \code
* psa_aead_operation_t operation = {0};
* \endcode
* - Initialize the structure to the initializer #PSA_AEAD_OPERATION_INIT,
* for example:
* \code
* psa_aead_operation_t operation = PSA_AEAD_OPERATION_INIT;
* \endcode
* - Assign the result of the function psa_aead_operation_init()
* to the structure, for example:
* \code
* psa_aead_operation_t operation;
* operation = psa_aead_operation_init();
* \endcode
*
* This is an implementation-defined \c struct. Applications should not
* make any assumptions about the content of this structure except
* as directed by the documentation of a specific implementation. */
typedef struct psa_aead_operation_s psa_aead_operation_t;
/** \def PSA_AEAD_OPERATION_INIT
*
* This macro returns a suitable initializer for an AEAD operation object of
* type #psa_aead_operation_t.
*/
#ifdef __DOXYGEN_ONLY__
/* This is an example definition for documentation purposes.
* Implementations should define a suitable value in `crypto_struct.h`.
*/
#define PSA_AEAD_OPERATION_INIT {0}
#endif
/** Return an initial value for an AEAD operation object.
*/
static psa_aead_operation_t psa_aead_operation_init(void);
/** Set the key for a multipart authenticated encryption operation.
*
* The sequence of operations to encrypt a message with authentication
* is as follows:
* -# Allocate an operation object which will be passed to all the functions
* listed here.
* -# Initialize the operation object with one of the methods described in the
* documentation for #psa_aead_operation_t, e.g.
* PSA_AEAD_OPERATION_INIT.
* -# Call psa_aead_encrypt_setup() to specify the algorithm and key.
* -# If needed, call psa_aead_set_lengths() to specify the length of the
* inputs to the subsequent calls to psa_aead_update_ad() and
* psa_aead_update(). See the documentation of psa_aead_set_lengths()
* for details.
* -# Call either psa_aead_generate_nonce() or psa_aead_set_nonce() to
* generate or set the nonce. You should use
* psa_aead_generate_nonce() unless the protocol you are implementing
* requires a specific nonce value.
* -# Call psa_aead_update_ad() zero, one or more times, passing a fragment
* of the non-encrypted additional authenticated data each time.
* -# Call psa_aead_update() zero, one or more times, passing a fragment
* of the message to encrypt each time.
* -# Call psa_aead_finish().
*
* The application may call psa_aead_abort() at any time after the operation
* has been initialized.
*
* After a successful call to psa_aead_encrypt_setup(), the application must
* eventually terminate the operation. The following events terminate an
* operation:
* - A failed call to any of the \c psa_aead_xxx functions.
* - A call to psa_aead_finish(), psa_aead_verify() or psa_aead_abort().
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized as per the documentation for
* #psa_aead_operation_t and not yet in use.
* \param handle Handle to the key to use for the operation.
* It must remain valid until the operation
* terminates.
* \param alg The AEAD algorithm to compute
* (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_AEAD(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not an AEAD algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_aead_encrypt_setup(psa_aead_operation_t *operation,
psa_key_handle_t handle,
psa_algorithm_t alg);
/** Set the key for a multipart authenticated decryption operation.
*
* The sequence of operations to decrypt a message with authentication
* is as follows:
* -# Allocate an operation object which will be passed to all the functions
* listed here.
* -# Initialize the operation object with one of the methods described in the
* documentation for #psa_aead_operation_t, e.g.
* PSA_AEAD_OPERATION_INIT.
* -# Call psa_aead_decrypt_setup() to specify the algorithm and key.
* -# If needed, call psa_aead_set_lengths() to specify the length of the
* inputs to the subsequent calls to psa_aead_update_ad() and
* psa_aead_update(). See the documentation of psa_aead_set_lengths()
* for details.
* -# Call psa_aead_set_nonce() with the nonce for the decryption.
* -# Call psa_aead_update_ad() zero, one or more times, passing a fragment
* of the non-encrypted additional authenticated data each time.
* -# Call psa_aead_update() zero, one or more times, passing a fragment
* of the ciphertext to decrypt each time.
* -# Call psa_aead_verify().
*
* The application may call psa_aead_abort() at any time after the operation
* has been initialized.
*
* After a successful call to psa_aead_decrypt_setup(), the application must
* eventually terminate the operation. The following events terminate an
* operation:
* - A failed call to any of the \c psa_aead_xxx functions.
* - A call to psa_aead_finish(), psa_aead_verify() or psa_aead_abort().
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized as per the documentation for
* #psa_aead_operation_t and not yet in use.
* \param handle Handle to the key to use for the operation.
* It must remain valid until the operation
* terminates.
* \param alg The AEAD algorithm to compute
* (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_AEAD(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p handle is not compatible with \p alg.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported or is not an AEAD algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_aead_decrypt_setup(psa_aead_operation_t *operation,
psa_key_handle_t handle,
psa_algorithm_t alg);
/** Generate a random nonce for an authenticated encryption operation.
*
* This function generates a random nonce for the authenticated encryption
* operation with an appropriate size for the chosen algorithm, key type
* and key size.
*
* The application must call psa_aead_encrypt_setup() before
* calling this function.
*
* If this function returns an error status, the operation becomes inactive.
*
* \param[in,out] operation Active AEAD operation.
* \param[out] nonce Buffer where the generated nonce is to be
* written.
* \param nonce_size Size of the \p nonce buffer in bytes.
* \param[out] nonce_length On success, the number of bytes of the
* generated nonce.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, or nonce already set).
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p nonce buffer is too small.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_aead_generate_nonce(psa_aead_operation_t *operation,
unsigned char *nonce,
size_t nonce_size,
size_t *nonce_length);
/** Set the nonce for an authenticated encryption or decryption operation.
*
* This function sets the nonce for the authenticated
* encryption or decryption operation.
*
* The application must call psa_aead_encrypt_setup() before
* calling this function.
*
* If this function returns an error status, the operation becomes inactive.
*
* \note When encrypting, applications should use psa_aead_generate_nonce()
* instead of this function, unless implementing a protocol that requires
* a non-random IV.
*
* \param[in,out] operation Active AEAD operation.
* \param[in] nonce Buffer containing the nonce to use.
* \param nonce_length Size of the nonce in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, or nonce already set).
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The size of \p nonce is not acceptable for the chosen algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_aead_set_nonce(psa_aead_operation_t *operation,
const unsigned char *nonce,
size_t nonce_length);
/** Declare the lengths of the message and additional data for AEAD.
*
* The application must call this function before calling
* psa_aead_update_ad() or psa_aead_update() if the algorithm for
* the operation requires it. If the algorithm does not require it,
* calling this function is optional, but if this function is called
* then the implementation must enforce the lengths.
*
* You may call this function before or after setting the nonce with
* psa_aead_set_nonce() or psa_aead_generate_nonce().
*
* - For #PSA_ALG_CCM, calling this function is required.
* - For the other AEAD algorithms defined in this specification, calling
* this function is not required.
* - For vendor-defined algorithm, refer to the vendor documentation.
*
* \param[in,out] operation Active AEAD operation.
* \param ad_length Size of the non-encrypted additional
* authenticated data in bytes.
* \param plaintext_length Size of the plaintext to encrypt in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, already completed,
* or psa_aead_update_ad() or psa_aead_update() already called).
* \retval #PSA_ERROR_INVALID_ARGUMENT
* At least one of the lengths is not acceptable for the chosen
* algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_aead_set_lengths(psa_aead_operation_t *operation,
size_t ad_length,
size_t plaintext_length);
/** Pass additional data to an active AEAD operation.
*
* Additional data is authenticated, but not encrypted.
*
* You may call this function multiple times to pass successive fragments
* of the additional data. You may not call this function after passing
* data to encrypt or decrypt with psa_aead_update().
*
* Before calling this function, you must:
* 1. Call either psa_aead_encrypt_setup() or psa_aead_decrypt_setup().
* 2. Set the nonce with psa_aead_generate_nonce() or psa_aead_set_nonce().
*
* If this function returns an error status, the operation becomes inactive.
*
* \warning When decrypting, until psa_aead_verify() has returned #PSA_SUCCESS,
* there is no guarantee that the input is valid. Therefore, until
* you have called psa_aead_verify() and it has returned #PSA_SUCCESS,
* treat the input as untrusted and prepare to undo any action that
* depends on the input if psa_aead_verify() returns an error status.
*
* \param[in,out] operation Active AEAD operation.
* \param[in] input Buffer containing the fragment of
* additional data.
* \param input_length Size of the \p input buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, nonce not set,
* psa_aead_update() already called, or operation already completed).
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The total input length overflows the additional data length that
* was previously specified with psa_aead_set_lengths().
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_aead_update_ad(psa_aead_operation_t *operation,
const uint8_t *input,
size_t input_length);
/** Encrypt or decrypt a message fragment in an active AEAD operation.
*
* Before calling this function, you must:
* 1. Call either psa_aead_encrypt_setup() or psa_aead_decrypt_setup().
* The choice of setup function determines whether this function
* encrypts or decrypts its input.
* 2. Set the nonce with psa_aead_generate_nonce() or psa_aead_set_nonce().
* 3. Call psa_aead_update_ad() to pass all the additional data.
*
* If this function returns an error status, the operation becomes inactive.
*
* \warning When decrypting, until psa_aead_verify() has returned #PSA_SUCCESS,
* there is no guarantee that the input is valid. Therefore, until
* you have called psa_aead_verify() and it has returned #PSA_SUCCESS:
* - Do not use the output in any way other than storing it in a
* confidential location. If you take any action that depends
* on the tentative decrypted data, this action will need to be
* undone if the input turns out not to be valid. Furthermore,
* if an adversary can observe that this action took place
* (for example through timing), they may be able to use this
* fact as an oracle to decrypt any message encrypted with the
* same key.
* - In particular, do not copy the output anywhere but to a
* memory or storage space that you have exclusive access to.
*
* \param[in,out] operation Active AEAD operation.
* \param[in] input Buffer containing the message fragment to
* encrypt or decrypt.
* \param input_length Size of the \p input buffer in bytes.
* \param[out] output Buffer where the output is to be written.
* \param output_size Size of the \p output buffer in bytes.
* \param[out] output_length On success, the number of bytes
* that make up the returned output.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, nonce not set
* or already completed).
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p output buffer is too small.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The total length of input to psa_aead_update_ad() so far is
* less than the additional data length that was previously
* specified with psa_aead_set_lengths().
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The total input length overflows the plaintext length that
* was previously specified with psa_aead_set_lengths().
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_aead_update(psa_aead_operation_t *operation,
const uint8_t *input,
size_t input_length,
unsigned char *output,
size_t output_size,
size_t *output_length);
/** Finish encrypting a message in an AEAD operation.
*
* The operation must have been set up with psa_aead_encrypt_setup().
*
* This function finishes the authentication of the additional data
* formed by concatenating the inputs passed to preceding calls to
* psa_aead_update_ad() with the plaintext formed by concatenating the
* inputs passed to preceding calls to psa_aead_update().
*
* This function has two output buffers:
* - \p ciphertext contains trailing ciphertext that was buffered from
* preceding calls to psa_aead_update(). For all standard AEAD algorithms,
* psa_aead_update() does not buffer any output and therefore \p ciphertext
* will not contain any output and can be a 0-sized buffer.
* - \p tag contains the authentication tag. Its length is always
* #PSA_AEAD_TAG_LENGTH(\c alg) where \c alg is the AEAD algorithm
* that the operation performs.
*
* When this function returns, the operation becomes inactive.
*
* \param[in,out] operation Active AEAD operation.
* \param[out] ciphertext Buffer where the last part of the ciphertext
* is to be written.
* \param ciphertext_size Size of the \p ciphertext buffer in bytes.
* \param[out] ciphertext_length On success, the number of bytes of
* returned ciphertext.
* \param[out] tag Buffer where the authentication tag is
* to be written.
* \param tag_size Size of the \p tag buffer in bytes.
* \param[out] tag_length On success, the number of bytes
* that make up the returned tag.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, nonce not set,
* decryption, or already completed).
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p ciphertext or \p tag buffer is too small.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The total length of input to psa_aead_update_ad() so far is
* less than the additional data length that was previously
* specified with psa_aead_set_lengths().
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The total length of input to psa_aead_update() so far is
* less than the plaintext length that was previously
* specified with psa_aead_set_lengths().
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_aead_finish(psa_aead_operation_t *operation,
uint8_t *ciphertext,
size_t ciphertext_size,
size_t *ciphertext_length,
uint8_t *tag,
size_t tag_size,
size_t *tag_length);
/** Finish authenticating and decrypting a message in an AEAD operation.
*
* The operation must have been set up with psa_aead_decrypt_setup().
*
* This function finishes the authentication of the additional data
* formed by concatenating the inputs passed to preceding calls to
* psa_aead_update_ad() with the ciphertext formed by concatenating the
* inputs passed to preceding calls to psa_aead_update().
*
* When this function returns, the operation becomes inactive.
*
* \param[in,out] operation Active AEAD operation.
* \param[in] tag Buffer containing the authentication tag.
* \param tag_length Size of the \p tag buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (not set up, nonce not set,
* encryption, or already completed).
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The total length of input to psa_aead_update_ad() so far is
* less than the additional data length that was previously
* specified with psa_aead_set_lengths().
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The total length of input to psa_aead_update() so far is
* less than the plaintext length that was previously
* specified with psa_aead_set_lengths().
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_aead_verify(psa_aead_operation_t *operation,
const uint8_t *tag,
size_t tag_length);
/** Abort an AEAD operation.
*
* Aborting an operation frees all associated resources except for the
* \p operation structure itself. Once aborted, the operation object
* can be reused for another operation by calling
* psa_aead_encrypt_setup() or psa_aead_decrypt_setup() again.
*
* You may call this function any time after the operation object has
* been initialized by any of the following methods:
* - A call to psa_aead_encrypt_setup() or psa_aead_decrypt_setup(),
* whether it succeeds or not.
* - Initializing the \c struct to all-bits-zero.
* - Initializing the \c struct to logical zeros, e.g.
* `psa_aead_operation_t operation = {0}`.
*
* In particular, calling psa_aead_abort() after the operation has been
* terminated by a call to psa_aead_abort() or psa_aead_finish()
* is safe and has no effect.
*
* \param[in,out] operation Initialized AEAD operation.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BAD_STATE
* \p operation is not an active AEAD operation.
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_aead_abort(psa_aead_operation_t *operation);
/**@}*/
/** \defgroup asymmetric Asymmetric cryptography
* @{
*/
/**
* \brief Sign a hash or short message with a private key.
*
* Note that to perform a hash-and-sign signature algorithm, you must
* first calculate the hash by calling psa_hash_setup(), psa_hash_update()
* and psa_hash_finish(). Then pass the resulting hash as the \p hash
* parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg)
* to determine the hash algorithm to use.
*
* \param handle Handle to the key to use for the operation.
* It must be an asymmetric key pair.
* \param alg A signature algorithm that is compatible with
* the type of \p handle.
* \param[in] hash The hash or message to sign.
* \param hash_length Size of the \p hash buffer in bytes.
* \param[out] signature Buffer where the signature is to be written.
* \param signature_size Size of the \p signature buffer in bytes.
* \param[out] signature_length On success, the number of bytes
* that make up the returned signature value.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p signature buffer is too small. You can
* determine a sufficient buffer size by calling
* #PSA_ASYMMETRIC_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
* where \c key_type and \c key_bits are the type and bit-size
* respectively of \p handle.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_asymmetric_sign(psa_key_handle_t handle,
psa_algorithm_t alg,
const uint8_t *hash,
size_t hash_length,
uint8_t *signature,
size_t signature_size,
size_t *signature_length);
/**
* \brief Verify the signature a hash or short message using a public key.
*
* Note that to perform a hash-and-sign signature algorithm, you must
* first calculate the hash by calling psa_hash_setup(), psa_hash_update()
* and psa_hash_finish(). Then pass the resulting hash as the \p hash
* parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg)
* to determine the hash algorithm to use.
*
* \param handle Handle to the key to use for the operation.
* It must be a public key or an asymmetric key pair.
* \param alg A signature algorithm that is compatible with
* the type of \p handle.
* \param[in] hash The hash or message whose signature is to be
* verified.
* \param hash_length Size of the \p hash buffer in bytes.
* \param[in] signature Buffer containing the signature to verify.
* \param signature_length Size of the \p signature buffer in bytes.
*
* \retval #PSA_SUCCESS
* The signature is valid.
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The calculation was perfomed successfully, but the passed
* signature is not a valid signature.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_asymmetric_verify(psa_key_handle_t handle,
psa_algorithm_t alg,
const uint8_t *hash,
size_t hash_length,
const uint8_t *signature,
size_t signature_length);
/**
* \brief Encrypt a short message with a public key.
*
* \param handle Handle to the key to use for the operation.
* It must be a public key or an asymmetric
* key pair.
* \param alg An asymmetric encryption algorithm that is
* compatible with the type of \p handle.
* \param[in] input The message to encrypt.
* \param input_length Size of the \p input buffer in bytes.
* \param[in] salt A salt or label, if supported by the
* encryption algorithm.
* If the algorithm does not support a
* salt, pass \c NULL.
* If the algorithm supports an optional
* salt and you do not want to pass a salt,
* pass \c NULL.
*
* - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
* supported.
* \param salt_length Size of the \p salt buffer in bytes.
* If \p salt is \c NULL, pass 0.
* \param[out] output Buffer where the encrypted message is to
* be written.
* \param output_size Size of the \p output buffer in bytes.
* \param[out] output_length On success, the number of bytes
* that make up the returned output.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p output buffer is too small. You can
* determine a sufficient buffer size by calling
* #PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
* where \c key_type and \c key_bits are the type and bit-size
* respectively of \p handle.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_asymmetric_encrypt(psa_key_handle_t handle,
psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
const uint8_t *salt,
size_t salt_length,
uint8_t *output,
size_t output_size,
size_t *output_length);
/**
* \brief Decrypt a short message with a private key.
*
* \param handle Handle to the key to use for the operation.
* It must be an asymmetric key pair.
* \param alg An asymmetric encryption algorithm that is
* compatible with the type of \p handle.
* \param[in] input The message to decrypt.
* \param input_length Size of the \p input buffer in bytes.
* \param[in] salt A salt or label, if supported by the
* encryption algorithm.
* If the algorithm does not support a
* salt, pass \c NULL.
* If the algorithm supports an optional
* salt and you do not want to pass a salt,
* pass \c NULL.
*
* - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
* supported.
* \param salt_length Size of the \p salt buffer in bytes.
* If \p salt is \c NULL, pass 0.
* \param[out] output Buffer where the decrypted message is to
* be written.
* \param output_size Size of the \c output buffer in bytes.
* \param[out] output_length On success, the number of bytes
* that make up the returned output.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p output buffer is too small. You can
* determine a sufficient buffer size by calling
2018-07-12 19:40:46 +02:00
* #PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
* where \c key_type and \c key_bits are the type and bit-size
* respectively of \p handle.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
* \retval #PSA_ERROR_INVALID_PADDING
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_asymmetric_decrypt(psa_key_handle_t handle,
psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
const uint8_t *salt,
size_t salt_length,
uint8_t *output,
size_t output_size,
size_t *output_length);
/**@}*/
/** \defgroup generators Generators
* @{
*/
/** The type of the state data structure for generators.
*
* Before calling any function on a generator, the application must
* initialize it by any of the following means:
* - Set the structure to all-bits-zero, for example:
* \code
* psa_crypto_generator_t generator;
* memset(&generator, 0, sizeof(generator));
* \endcode
* - Initialize the structure to logical zero values, for example:
* \code
* psa_crypto_generator_t generator = {0};
* \endcode
* - Initialize the structure to the initializer #PSA_CRYPTO_GENERATOR_INIT,
* for example:
* \code
* psa_crypto_generator_t generator = PSA_CRYPTO_GENERATOR_INIT;
* \endcode
* - Assign the result of the function psa_crypto_generator_init()
* to the structure, for example:
* \code
* psa_crypto_generator_t generator;
* generator = psa_crypto_generator_init();
* \endcode
*
* This is an implementation-defined \c struct. Applications should not
* make any assumptions about the content of this structure except
* as directed by the documentation of a specific implementation.
*/
typedef struct psa_crypto_generator_s psa_crypto_generator_t;
/** \def PSA_CRYPTO_GENERATOR_INIT
*
* This macro returns a suitable initializer for a generator object
* of type #psa_crypto_generator_t.
*/
#ifdef __DOXYGEN_ONLY__
/* This is an example definition for documentation purposes.
* Implementations should define a suitable value in `crypto_struct.h`.
*/
#define PSA_CRYPTO_GENERATOR_INIT {0}
#endif
/** Return an initial value for a generator object.
*/
static psa_crypto_generator_t psa_crypto_generator_init(void);
/** Retrieve the current capacity of a generator.
*
* The capacity of a generator is the maximum number of bytes that it can
* return. Reading *N* bytes from a generator reduces its capacity by *N*.
*
* \param[in] generator The generator to query.
* \param[out] capacity On success, the capacity of the generator.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BAD_STATE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
*/
psa_status_t psa_get_generator_capacity(const psa_crypto_generator_t *generator,
size_t *capacity);
/** Set the maximum capacity of a generator.
*
* \param[in,out] generator The generator object to modify.
* \param capacity The new capacity of the generator.
* It must be less or equal to the generator's
* current capacity.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p capacity is larger than the generator's current capacity.
* \retval #PSA_ERROR_BAD_STATE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
*/
psa_status_t psa_set_generator_capacity(psa_crypto_generator_t *generator,
size_t capacity);
/** Read some data from a generator.
*
* This function reads and returns a sequence of bytes from a generator.
* The data that is read is discarded from the generator. The generator's
* capacity is decreased by the number of bytes read.
*
* \param[in,out] generator The generator object to read from.
* \param[out] output Buffer where the generator output will be
* written.
* \param output_length Number of bytes to output.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_INSUFFICIENT_CAPACITY
* There were fewer than \p output_length bytes
* in the generator. Note that in this case, no
* output is written to the output buffer.
* The generator's capacity is set to 0, thus
* subsequent calls to this function will not
* succeed, even with a smaller output buffer.
* \retval #PSA_ERROR_BAD_STATE
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_generator_read(psa_crypto_generator_t *generator,
uint8_t *output,
size_t output_length);
/** Create a symmetric key from data read from a generator.
*
* This function reads a sequence of bytes from a generator and imports
* these bytes as a key.
* The data that is read is discarded from the generator. The generator's
* capacity is decreased by the number of bytes read.
*
* This function is equivalent to calling #psa_generator_read and
* passing the resulting output to #psa_import_key, but
* if the implementation provides an isolation boundary then
* the key material is not exposed outside the isolation boundary.
*
* \param handle Handle to the slot where the key will be stored.
* It must have been obtained by calling
* psa_allocate_key() or psa_create_key() and must
* not contain key material yet.
* \param type Key type (a \c PSA_KEY_TYPE_XXX value).
* This must be a symmetric key type.
* \param bits Key size in bits.
* \param[in,out] generator The generator object to read from.
*
* \retval #PSA_SUCCESS
* Success.
* If the key is persistent, the key material and the key's metadata
* have been saved to persistent storage.
* \retval #PSA_ERROR_INSUFFICIENT_CAPACITY
* There were fewer than \p bits * 8 bytes
* in the generator. Note that in this case, no
* output is written to the output buffer.
* The generator's capacity is set to 0, thus
* subsequent calls to this function will not
* succeed, even with a smaller output buffer.
* \retval #PSA_ERROR_NOT_SUPPORTED
* The key type or key size is not supported, either by the
* implementation in general or in this particular slot.
* \retval #PSA_ERROR_BAD_STATE
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_OCCUPIED_SLOT
* There is already a key in the specified slot.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_INSUFFICIENT_STORAGE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_generator_import_key(psa_key_handle_t handle,
psa_key_type_t type,
size_t bits,
psa_crypto_generator_t *generator);
/** Abort a generator.
*
* Once a generator has been aborted, its capacity is zero.
* Aborting a generator frees all associated resources except for the
* \c generator structure itself.
*
* This function may be called at any time as long as the generator
* object has been initialized to #PSA_CRYPTO_GENERATOR_INIT, to
* psa_crypto_generator_init() or a zero value. In particular, it is valid
* to call psa_generator_abort() twice, or to call psa_generator_abort()
* on a generator that has not been set up.
*
* Once aborted, the generator object may be called.
*
* \param[in,out] generator The generator to abort.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_BAD_STATE
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_generator_abort(psa_crypto_generator_t *generator);
/** Use the maximum possible capacity for a generator.
*
* Use this value as the capacity argument when setting up a generator
* to indicate that the generator should have the maximum possible capacity.
* The value of the maximum possible capacity depends on the generator
* algorithm.
*/
#define PSA_GENERATOR_UNBRIDLED_CAPACITY ((size_t)(-1))
/**@}*/
/** \defgroup derivation Key derivation
* @{
*/
/** Set up a key derivation operation.
*
* A key derivation algorithm takes some inputs and uses them to create
* a byte generator which can be used to produce keys and other
* cryptographic material.
*
* To use a generator for key derivation:
* - Start with an initialized object of type #psa_crypto_generator_t.
* - Call psa_key_derivation_setup() to select the algorithm.
* - Provide the inputs for the key derivation by calling
* psa_key_derivation_input_bytes() or psa_key_derivation_input_key()
* as appropriate. Which inputs are needed, in what order, and whether
* they may be keys and if so of what type depends on the algorithm.
* - Optionally set the generator's maximum capacity with
* psa_set_generator_capacity(). You may do this before, in the middle of
* or after providing inputs. For some algorithms, this step is mandatory
* because the output depends on the maximum capacity.
* - Generate output with psa_generator_read() or
* psa_generator_import_key(). Successive calls to these functions
* use successive output bytes from the generator.
* - Clean up the generator object with psa_generator_abort().
*
* \param[in,out] generator The generator object to set up. It must
* have been initialized but not set up yet.
* \param alg The key derivation algorithm to compute
* (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_KEY_DERIVATION(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \c alg is not a key derivation algorithm.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \c alg is not supported or is not a key derivation algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
*/
psa_status_t psa_key_derivation_setup(psa_crypto_generator_t *generator,
psa_algorithm_t alg);
/** Provide an input for key derivation or key agreement.
*
* Which inputs are required and in what order depends on the algorithm.
* Refer to the documentation of each key derivation or key agreement
* algorithm for information.
*
* This function passes direct inputs. Some inputs must be passed as keys
* using psa_key_derivation_input_key() instead of this function. Refer to
* the documentation of individual step types for information.
*
* \param[in,out] generator The generator object to use. It must
* have been set up with
* psa_key_derivation_setup() and must not
* have produced any output yet.
* \param step Which step the input data is for.
* \param[in] data Input data to use.
* \param data_length Size of the \p data buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \c step is not compatible with the generator's algorithm.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \c step does not allow direct inputs.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The value of \p step is not valid given the state of \p generator.
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_key_derivation_input_bytes(psa_crypto_generator_t *generator,
psa_key_derivation_step_t step,
const uint8_t *data,
size_t data_length);
/** Provide an input for key derivation in the form of a key.
*
* Which inputs are required and in what order depends on the algorithm.
* Refer to the documentation of each key derivation or key agreement
* algorithm for information.
*
* This function passes key inputs. Some inputs must be passed as keys
* of the appropriate type using this function, while others must be
* passed as direct inputs using psa_key_derivation_input_bytes(). Refer to
* the documentation of individual step types for information.
*
* \param[in,out] generator The generator object to use. It must
* have been set up with
* psa_key_derivation_setup() and must not
* have produced any output yet.
* \param step Which step the input data is for.
* \param handle Handle to the key. It must have an
* appropriate type for \p step and must
* allow the usage #PSA_KEY_USAGE_DERIVE.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \c step is not compatible with the generator's algorithm.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \c step does not allow key inputs.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The value of \p step is not valid given the state of \p generator.
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t psa_key_derivation_input_key(psa_crypto_generator_t *generator,
psa_key_derivation_step_t step,
psa_key_handle_t handle);
/** Perform a key agreement and use the shared secret as input to a key
* derivation.
*
* A key agreement algorithm takes two inputs: a private key \p private_key
* a public key \p peer_key.
* The result of this function is passed as input to a key derivation.
* The output of this key derivation can be extracted by reading from the
* resulting generator to produce keys and other cryptographic material.
*
* \param[in,out] generator The generator object to use. It must
* have been set up with
* psa_key_derivation_setup() with a
* key agreement and derivation algorithm
* \c alg (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_KEY_AGREEMENT(\c alg) is true
* and #PSA_ALG_IS_RAW_KEY_AGREEMENT(\c alg)
* is false).
* The generator must be ready for an
* input of the type given by \p step.
* \param step Which step the input data is for.
* \param private_key Handle to the private key to use.
* \param[in] peer_key Public key of the peer. The peer key must be in the
* same format that psa_import_key() accepts for the
* public key type corresponding to the type of
* private_key. That is, this function performs the
* equivalent of
* #psa_import_key(`internal_public_key_handle`,
* #PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(`private_key_type`),
* `peer_key`, `peer_key_length`) where
* `private_key_type` is the type of `private_key`.
* For example, for EC keys, this means that peer_key
* is interpreted as a point on the curve that the
* private key is on. The standard formats for public
* keys are documented in the documentation of
* psa_export_public_key().
* \param peer_key_length Size of \p peer_key in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \c private_key is not compatible with \c alg,
* or \p peer_key is not valid for \c alg or not compatible with
* \c private_key.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \c alg is not supported or is not a key derivation algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_key_agreement(psa_crypto_generator_t *generator,
psa_key_derivation_step_t step,
psa_key_handle_t private_key,
const uint8_t *peer_key,
size_t peer_key_length);
/** Perform a key agreement and use the shared secret as input to a key
* derivation.
*
* A key agreement algorithm takes two inputs: a private key \p private_key
* a public key \p peer_key.
*
* \warning The raw result of a key agreement algorithm such as finite-field
* Diffie-Hellman or elliptic curve Diffie-Hellman has biases and should
* not be used directly as key material. It should instead be passed as
* input to a key derivation algorithm. To chain a key agreement with
* a key derivation, use psa_key_agreement() and other functions from
* the key derivation and generator interface.
*
* \param alg The key agreement algorithm to compute
* (\c PSA_ALG_XXX value such that
* #PSA_ALG_IS_RAW_KEY_AGREEMENT(\p alg)
* is true).
* \param private_key Handle to the private key to use.
* \param[in] peer_key Public key of the peer. It must be
* in the same format that psa_import_key()
* accepts. The standard formats for public
* keys are documented in the documentation
* of psa_export_public_key().
* \param peer_key_length Size of \p peer_key in bytes.
* \param[out] output Buffer where the decrypted message is to
* be written.
* \param output_size Size of the \c output buffer in bytes.
* \param[out] output_length On success, the number of bytes
* that make up the returned output.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_EMPTY_SLOT
* \retval #PSA_ERROR_NOT_PERMITTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p alg is not a key agreement algorithm
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \p private_key is not compatible with \p alg,
* or \p peer_key is not valid for \p alg or not compatible with
* \p private_key.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not a supported key agreement algorithm.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
*/
psa_status_t psa_key_agreement_raw_shared_secret(psa_algorithm_t alg,
psa_key_handle_t private_key,
const uint8_t *peer_key,
size_t peer_key_length,
uint8_t *output,
size_t output_size,
size_t *output_length);
/**@}*/
/** \defgroup random Random generation
2018-03-28 14:18:50 +02:00
* @{
*/
/**
* \brief Generate random bytes.
*
* \warning This function **can** fail! Callers MUST check the return status
* and MUST NOT use the content of the output buffer if the return
* status is not #PSA_SUCCESS.
*
* \note To generate a key, use psa_generate_key() instead.
*
* \param[out] output Output buffer for the generated data.
2018-03-28 14:18:50 +02:00
* \param output_size Number of bytes to generate and output.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
2018-03-28 14:18:50 +02:00
*/
psa_status_t psa_generate_random(uint8_t *output,
size_t output_size);
/** Extra parameters for RSA key generation.
*
* You may pass a pointer to a structure of this type as the \c extra
* parameter to psa_generate_key().
*/
typedef struct {
uint32_t e; /**< Public exponent value. Default: 65537. */
} psa_generate_key_extra_rsa;
2018-03-28 14:18:50 +02:00
/**
* \brief Generate a key or key pair.
*
* \param handle Handle to the slot where the key will be stored.
* It must have been obtained by calling
* psa_allocate_key() or psa_create_key() and must
* not contain key material yet.
* \param type Key type (a \c PSA_KEY_TYPE_XXX value).
* \param bits Key size in bits.
* \param[in] extra Extra parameters for key generation. The
* interpretation of this parameter depends on
* \p type. All types support \c NULL to use
* default parameters. Implementation that support
* the generation of vendor-specific key types
* that allow extra parameters shall document
* the format of these extra parameters and
* the default values. For standard parameters,
* the meaning of \p extra is as follows:
* - For a symmetric key type (a type such
* that #PSA_KEY_TYPE_IS_ASYMMETRIC(\p type) is
* false), \p extra must be \c NULL.
* - For an elliptic curve key type (a type
* such that #PSA_KEY_TYPE_IS_ECC(\p type) is
* false), \p extra must be \c NULL.
2018-07-12 19:40:46 +02:00
* - For an RSA key (\p type is
* #PSA_KEY_TYPE_RSA_KEYPAIR), \p extra is an
* optional #psa_generate_key_extra_rsa structure
* specifying the public exponent. The
* default public exponent used when \p extra
* is \c NULL is 65537.
* - For an DSA key (\p type is
* #PSA_KEY_TYPE_DSA_KEYPAIR), \p extra is an
* optional structure specifying the key domain
* parameters. The key domain parameters can also be
* provided by psa_set_key_domain_parameters(),
* which documents the format of the structure.
* - For a DH key (\p type is
* #PSA_KEY_TYPE_DH_KEYPAIR), the \p extra is an
* optional structure specifying the key domain
* parameters. The key domain parameters can also be
* provided by psa_set_key_domain_parameters(),
* which documents the format of the structure.
* \param extra_size Size of the buffer that \p extra
* points to, in bytes. Note that if \p extra is
* \c NULL then \p extra_size must be zero.
2018-03-28 14:18:50 +02:00
*
* \retval #PSA_SUCCESS
* Success.
* If the key is persistent, the key material and the key's metadata
* have been saved to persistent storage.
* \retval #PSA_ERROR_INVALID_HANDLE
* \retval #PSA_ERROR_OCCUPIED_SLOT
* There is already a key in the specified slot.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \retval #PSA_ERROR_INVALID_ARGUMENT
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
* \retval #PSA_ERROR_COMMUNICATION_FAILURE
* \retval #PSA_ERROR_HARDWARE_FAILURE
* \retval #PSA_ERROR_TAMPERING_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
2018-03-28 14:18:50 +02:00
*/
psa_status_t psa_generate_key(psa_key_handle_t handle,
2018-03-28 14:18:50 +02:00
psa_key_type_t type,
size_t bits,
const void *extra,
size_t extra_size);
2018-03-28 14:18:50 +02:00
/**@}*/
#ifdef __cplusplus
}
#endif
/* The file "crypto_sizes.h" contains definitions for size calculation
* macros whose definitions are implementation-specific. */
#include "crypto_sizes.h"
/* The file "crypto_struct.h" contains definitions for
* implementation-specific structs that are declared above. */
#include "crypto_struct.h"
/* The file "crypto_extra.h" contains vendor-specific definitions. This
* can include vendor-defined algorithms, extra functions, etc. */
#include "crypto_extra.h"
#endif /* PSA_CRYPTO_H */