nixpkgs-suyu/modules/profiles/all-hardware.nix
Eelco Dolstra f281207ea2 * Disable the RTL 8192c firmware because it doesn't build.
svn path=/nixos/trunk/; revision=30332
2011-11-08 16:21:57 +00:00

72 lines
2.3 KiB
Nix

# This module enables all hardware supported by NixOS: i.e., all
# firmware is included, and all devices from which one may boot are
# enabled in the initrd. Its primary use is in the NixOS installation
# CDs.
{ config, pkgs, ... }:
{
# The initrd has to contain any module that might be necessary for
# mounting the CD/DVD.
boot.initrd.availableKernelModules =
[ # SATA/PATA support.
"ahci"
"ata_piix"
"sata_inic162x" "sata_nv" "sata_promise" "sata_qstor"
"sata_sil" "sata_sil24" "sata_sis" "sata_svw" "sata_sx4"
"sata_uli" "sata_via" "sata_vsc"
"pata_ali" "pata_amd" "pata_artop" "pata_atiixp"
"pata_cs5520" "pata_cs5530" "pata_cs5535" "pata_efar"
"pata_hpt366" "pata_hpt37x" "pata_hpt3x2n" "pata_hpt3x3"
"pata_it8213" "pata_it821x" "pata_jmicron" "pata_marvell"
"pata_mpiix" "pata_netcell" "pata_ns87410" "pata_oldpiix"
"pata_pcmcia" "pata_pdc2027x" "pata_qdi" "pata_rz1000"
"pata_sc1200" "pata_serverworks" "pata_sil680" "pata_sis"
"pata_sl82c105" "pata_triflex" "pata_via"
"pata_winbond"
# SCSI support (incomplete).
"3w-9xxx" "3w-xxxx" "aic79xx" "aic7xxx" "arcmsr"
# USB support, especially for booting from USB CD-ROM
# drives.
"usb_storage"
# Firewire support. Not tested.
"ohci1394" "sbp2"
# Virtio (QEMU, KVM etc.) support.
"virtio_net" "virtio_pci" "virtio_blk" "virtio_balloon" "virtio_console"
# Add vfat to enable people to copy the contents of the CD to a
# bootable USB stick.
"vfat" "nls_cp437" "nls_iso8859-1"
];
boot.initrd.kernelModules =
[ # Wait for SCSI devices to appear.
"scsi_wait_scan"
];
# Include lots of firmware.
require =
[ ../hardware/network/intel-4965agn.nix
../hardware/network/intel-5000.nix
../hardware/network/intel-6000.nix
../hardware/network/intel-6000g2a.nix
../hardware/network/intel-6000g2b.nix
../hardware/network/broadcom-43xx.nix
../hardware/network/zydas-zd1211.nix
../hardware/video/radeon.nix
];
networking.enableIntel2100BGFirmware = true;
networking.enableIntel2200BGFirmware = true;
networking.enableIntel3945ABGFirmware = true;
#networking.enableRTL8192cFirmware = true; # doesn't build
}