152 lines
4.6 KiB
Nix
152 lines
4.6 KiB
Nix
{ config, lib, pkgs, ... }:
|
|
|
|
with lib;
|
|
|
|
let
|
|
|
|
cfg = config.services.thinkfan;
|
|
configFile = pkgs.writeText "thinkfan.conf" ''
|
|
# ATTENTION: There is only very basic sanity checking on the configuration.
|
|
# That means you can set your temperature limits as insane as you like. You
|
|
# can do anything stupid, e.g. turn off your fan when your CPU reaches 70°C.
|
|
#
|
|
# That's why this program is called THINKfan: You gotta think for yourself.
|
|
#
|
|
######################################################################
|
|
#
|
|
# IBM/Lenovo Thinkpads (thinkpad_acpi, /proc/acpi/ibm)
|
|
# ====================================================
|
|
#
|
|
# IMPORTANT:
|
|
#
|
|
# To keep your HD from overheating, you have to specify a correction value for
|
|
# the sensor that has the HD's temperature. You need to do this because
|
|
# thinkfan uses only the highest temperature it can find in the system, and
|
|
# that'll most likely never be your HD, as most HDs are already out of spec
|
|
# when they reach 55 °C.
|
|
# Correction values are applied from left to right in the same order as the
|
|
# temperatures are read from the file.
|
|
#
|
|
# For example:
|
|
# tp_thermal /proc/acpi/ibm/thermal (0, 0, 10)
|
|
# will add a fixed value of 10 °C the 3rd value read from that file. Check out
|
|
# http://www.thinkwiki.org/wiki/Thermal_Sensors to find out how much you may
|
|
# want to add to certain temperatures.
|
|
|
|
${cfg.fan}
|
|
${cfg.sensors}
|
|
|
|
# Syntax:
|
|
# (LEVEL, LOW, HIGH)
|
|
# LEVEL is the fan level to use (0-7 with thinkpad_acpi)
|
|
# LOW is the temperature at which to step down to the previous level
|
|
# HIGH is the temperature at which to step up to the next level
|
|
# All numbers are integers.
|
|
#
|
|
|
|
${cfg.levels}
|
|
'';
|
|
|
|
thinkfan = pkgs.thinkfan.override { smartSupport = cfg.smartSupport; };
|
|
|
|
in {
|
|
|
|
options = {
|
|
|
|
services.thinkfan = {
|
|
|
|
enable = mkOption {
|
|
type = types.bool;
|
|
default = false;
|
|
description = ''
|
|
Whether to enable thinkfan, fan controller for IBM/Lenovo ThinkPads.
|
|
'';
|
|
};
|
|
|
|
smartSupport = mkOption {
|
|
type = types.bool;
|
|
default = false;
|
|
description = ''
|
|
Whether to build thinkfan with SMART support to read temperatures
|
|
directly from hard disks.
|
|
'';
|
|
};
|
|
|
|
sensors = mkOption {
|
|
type = types.lines;
|
|
default = ''
|
|
tp_thermal /proc/acpi/ibm/thermal (0,0,10)
|
|
'';
|
|
description =''
|
|
thinkfan can read temperatures from three possible sources:
|
|
|
|
/proc/acpi/ibm/thermal
|
|
Which is provided by the thinkpad_acpi kernel
|
|
module (keyword tp_thermal)
|
|
|
|
/sys/class/hwmon/*/temp*_input
|
|
Which may be provided by any hwmon drivers (keyword
|
|
hwmon)
|
|
|
|
S.M.A.R.T. (requires smartSupport to be enabled)
|
|
Which reads the temperature directly from the hard
|
|
disk using libatasmart (keyword atasmart)
|
|
|
|
Multiple sensors may be added, in which case they will be
|
|
numbered in their order of appearance.
|
|
'';
|
|
};
|
|
|
|
fan = mkOption {
|
|
type = types.str;
|
|
default = "tp_fan /proc/acpi/ibm/fan";
|
|
description =''
|
|
Specifies the fan we want to use.
|
|
On anything other than a Thinkpad you'll probably
|
|
use some PWM control file in /sys/class/hwmon.
|
|
A sysfs fan would be specified like this:
|
|
pwm_fan /sys/class/hwmon/hwmon2/device/pwm1
|
|
'';
|
|
};
|
|
|
|
levels = mkOption {
|
|
type = types.lines;
|
|
default = ''
|
|
(0, 0, 55)
|
|
(1, 48, 60)
|
|
(2, 50, 61)
|
|
(3, 52, 63)
|
|
(6, 56, 65)
|
|
(7, 60, 85)
|
|
(127, 80, 32767)
|
|
'';
|
|
description = ''
|
|
(LEVEL, LOW, HIGH)
|
|
LEVEL is the fan level to use (0-7 with thinkpad_acpi).
|
|
LOW is the temperature at which to step down to the previous level.
|
|
HIGH is the temperature at which to step up to the next level.
|
|
All numbers are integers.
|
|
'';
|
|
};
|
|
|
|
|
|
};
|
|
|
|
};
|
|
|
|
config = mkIf cfg.enable {
|
|
|
|
environment.systemPackages = [ thinkfan ];
|
|
|
|
systemd.services.thinkfan = {
|
|
description = "Thinkfan";
|
|
after = [ "basic.target" ];
|
|
wantedBy = [ "multi-user.target" ];
|
|
path = [ thinkfan ];
|
|
serviceConfig.ExecStart = "${thinkfan}/bin/thinkfan -n -c ${configFile}";
|
|
};
|
|
|
|
boot.extraModprobeConfig = "options thinkpad_acpi experimental=1 fan_control=1";
|
|
|
|
};
|
|
}
|