According to the ABNF grammar for PEM files described in [RFC
7468][1], an eol character (i.e. a newline) is not mandatory after the
posteb line (i.e. "-----END CERTIFICATE-----" in the case of
certificates).
This commit makes our CA certificate bundler expression account for
the possibility that files in config.security.pki.certificateFiles
might not have final newlines, by using `awk` instead of `cat` to
concatenate them. (`awk` prints a final newline from each input file
even if the file doesn't end with a newline.)
[1]: https://datatracker.ietf.org/doc/html/rfc7468#section-3
While looking at the sphinx package I noticed it was heavily
undermaintained, which is when we noticed nand0p has been inactive for
roughly 18 months. It is therefore prudent to assume they will not be
maintaining their packages, modules and tests.
- Their last contribution to nixpkgs was in 2019/12
- On 2021/05/08 I wrote them an email to the address listed in the
maintainer-list, which they didn't reply to.
Most programs already run natively under Wayland so extraSessionCommands
isn't as important anymore. XWayland is already covered by
"programs.xwayland.enable = mkDefault true;" in the module.
Also document that `ProtectClock` blocks access to serial line.
I couldn't found out why this is the case,
but faxgetty complains about the device file
not being accessible with `ProtectClock=true`.
This should make it easier to get started.
The xdg-desktop-portal backend for wlroots is required and one needs to
"make sure WAYLAND_DISPLAY and XDG_CURRENT_DESKTOP are imported into
D-Bus." [0]
[0]: efcbcb60aa/README.md (running)
Or … none! Because forcing a string always results in an OnCalender=
setting, but an empty string leads to an empty value.
> postgresqlBackup-hass.timer: Timer unit lacks value setting. Refusing.
or
> postgresqlBackup-miniflux.timer: Cannot add dependency job, ignoring: Unit postgresqlBackup-miniflux.timer has a bad unit file setting.
I require the postgresqlBackup in my borgbackup unit, so I don't
strictly need the timer and could previously set it to an empty list.
This reverts commit 6f6b2cdc98.
Version wasn't updated, and apparently a patch didn't apply. Let's do
this upgrade properly, in a PR, but for now I'm reverting so we don't
have a broken nix package in master.
According to
https://github.com/NixOS/nixpkgs/pull/84556
this effort helps with cross-compilation.
This commit also renames a substituted variable `hylafax`
to `hylafaxplus` to permit substitution with `inherit`.
Both networking.nat.enable and virtualisation.docker.enable now want to
make sure that the IP forwarding sysctl is enabled, but the module
system dislikes that both modules contain this option.
Realistically this should be refactored a bit, so that the Docker module
automatically enables the NAT module instead, but this is a more obvious
fix.
The default config.in template contains
"include @sysconfdir@/sway/config.d/*" but we've dropped it to better
support non-NixOS (which seems like a mistake in retrospect).
This restores that behaviour and extends the default configuration via
nixos.conf to fix#119445.
Note: The security configurations (security.d) where dropped entirely
(but maybe they'll return).
* add an example for services.tor.settings.HidServAuth
* fix HidServAuth validation to require ".onion"
Per https://manpages.debian.org/testing/tor/torrc.5.en.html :
> Valid onion addresses contain 16 characters in a-z2-7 plus ".onion"
ssm-agent expects files in /etc/amazon/ssm. The pkg substitutes a location in
the nix store for those default files, but if we ever want to adjust this
configuration on NixOS, we'd need the ability to modify that file.
This change to the nixos module writes copies of the default files from the nix
store to /etc/amazon/ssm. Future versions can add config, but right now this
would allow users to at least write out a text value to
environment.etc."amazon/ssm/amazon-ssm-agent.json".text to provide
their own config.
Changed the startup timeout from 15 seconds to one minute as 15 seconds is really low.
Also it's currently not possible to change it without editing your system configuration.
set a group and user for the service
remove default null config
it's required, now it throws an error pointing to the option
set myself (module author) as maintainer
(It was requested by them.)
I left one case due to fetching from their personal repo:
pkgs/desktops/pantheon/desktop/extra-elementary-contracts/default.nix
Since v2021.5.0 home-assistant uses the ifaddr library in the zeroconf
component to enumerate network interfaces via netlink. Since discovery
is all over the place lets allow AF_NETLINK unconditionally.
It also relies on pyroute2 now, which additionally tries to access files
in /proc/net, so we relax ProtectProc a bit by default as well.
This leaves us with these options unsecured:
✗ PrivateNetwork= Service has access to the host's network 0.5
✗ RestrictAddressFamilies=~AF_(INET|INET6) Service may allocate Internet sockets 0.3
✗ DeviceAllow= Service has a device ACL with some special devices 0.1
✗ IPAddressDeny= Service does not define an IP address allow list 0.2
✗ PrivateDevices= Service potentially has access to hardware devices 0.2
✗ PrivateUsers= Service has access to other users 0.2
✗ SystemCallFilter=~@resources System call allow list defined for service, and @resources is included (e.g. ioprio_set is allowed) 0.2
✗ RestrictAddressFamilies=~AF_NETLINK Service may allocate netlink sockets 0.1
✗ RootDirectory=/RootImage= Service runs within the host's root directory 0.1
✗ SupplementaryGroups= Service runs with supplementary groups 0.1
✗ RestrictAddressFamilies=~AF_UNIX Service may allocate local sockets 0.1
✗ ProcSubset= Service has full access to non-process /proc files (/proc subset=) 0.1
→ Overall exposure level for home-assistant.service: 1.6 OK 🙂
libbrotli wasn't listed as a dependency for the AppArmor profile of the transmission-daemon binary.
As a result, transmission wouldn't run and would fail, logging this audit message to dmesg:
audit[11595]: AVC apparmor=DENIED operation=open profile=/nix/store/08i1rmakmnpwyxpvp0sfc5hcm106am7w-transmission-3.00/bin/transmission-daemon name=/proc/11595/environ pid=11595 comm=transmission-da requested_mask=r denied_mask=r fsuid=70 ouid=70
This reverts commit d9e18f4e7f.
This change is broken, since it doesn't configure the proper database
username in keycloak when provisioning a local database with a custom
username. Its intended behavior is also potentially confusing and
dangerous, so rather than fixing it, let's revert to the old one.
The radicale version is no longer chosen automatically based on
system.stateVersion because that gave the impression that old versions
are still supported.
Follow RFC 42 by having a settings option that is
then converted into an unbound configuration file
instead of having an extraConfig option.
Existing options have been renamed or kept if
possible.
An enableRemoteAccess has been added. It sets remote-control setting to
true in unbound.conf which in turn enables the new wrapping of
unbound-control to access the server locally. Also includes options
'remoteAccessInterfaces' and 'remoteAccessPort' for remote access.
Signed-off-by: Marc 'risson' Schmitt <marc.schmitt@risson.space>
The reap function culls expired pastes outside of the process serving
the pastes. Previously the database could accumulate a large number of
pastes and while they were expired they would not be deleted unless
accessed from the frontend.
Individual settings would previously overwrite the whole config, but
now individual values can be overwritten.
Fix missing slash to make the database path an absolute path per
https://docs.sqlalchemy.org/en/14/core/engines.html#sqlite.
Drop preferred_lexers, it's not set to anything meaningful anyway.
Home-assistant through its `--runner` commandline flag supports sending
exit code 100 when the `homeassistant.restart` service is called.
With `RestartForceExitStatus` we can listen for that specific exit code
and restart the whole systemd unit, providing an actual clean restart
with fresh processes. Additional treat exit code 100 as a successful
termination.
This is what is still exposed, and it should still allow things to work
as usual.
✗ PrivateNetwork= Service has access to the host's … 0.5
✗ RestrictAddressFamilies=~AF_(INET… Service may allocate Internet soc… 0.3
✗ DeviceAllow= Service has a device ACL with som… 0.1
✗ IPAddressDeny= Service does not define an IP add… 0.2
✗ PrivateDevices= Service potentially has access to… 0.2
✗ PrivateUsers= Service has access to other users 0.2
✗ SystemCallFilter=~@resources System call allow list defined fo… 0.2
✗ RootDirectory=/RootImage= Service runs within the host's ro… 0.1
✗ SupplementaryGroups= Service runs with supplementary g… 0.1
✗ RestrictAddressFamilies=~AF_UNIX Service may allocate local sockets 0.1
→ Overall exposure level for home-assistant.service: 1.6 OK :-)
This can grow to as much as ~1.9 if you use one of the bluetooth or nmap
trackers or the emulated_hue component, all of which required elevated
permisssions.
Postfix has started outputting an error on startup that it can't parse
the compatibility level 9999.
Instead, just set the compatibility level to be identical to the current
version, which seems to be the (new) intent for the compatibility level.
Looks like GRUB has issues loading EFI binaries from (cd0), which is
what would be used in e.g. qemu with OVMF with `-cdrom`. Apparently also
what is used with AArch64 + U-Boot USB.
The serial output (but it's named console, not serial actually) causes
issues on U-Boot's EFI, at the very least.
This is inspired by OpenSUSE's approach:
* https://build.opensuse.org/package/view_file/Base:System/grub2/grub2-SUSE-Add-the-t-hotkey.patch
Where they add a hidden menu entry, which can be used to force the
console output.
The `echo` will be visible on the serial terminal (grub "console"),
while the graphical interface is shown. Note that input in the serial
terminal (grub "console") will continue controlling the graphical
interface. Useful if you have an SBC connectedinto an HDMI monitor, but
no keyboard connected to it.
- In order to use GIO/GVFS it is enough to enable the gvfs service.
- The module option services.gvfs.package can be used to choose a
variation of the gvfs package, if desired.
Fixes these two deprecation warnings, by moving away from these options
towards a simple listener configuration.
> The 'bind_address' option is now deprecated and will be removed in a future version. The behaviour will default to true.
> The 'port' option is now deprecated and will be removed in a future version. Please use 'listener' instead.
Fixes: #120860
It can still network, it can only access the ssl related files if ssl is
enabled.
✗ PrivateNetwork= Service has access to the host's network 0.5
✗ RestrictAddressFamilies=~AF_(INET|INET6) Service may allocate Internet sockets 0.3
✗ DeviceAllow= Service has a device ACL with some special devices 0.1
✗ IPAddressDeny= Service does not define an IP address allow list 0.2
✗ RootDirectory=/RootImage= Service runs within the host's root directory 0.1
✗ RestrictAddressFamilies=~AF_UNIX Service may allocate local sockets 0.1
→ Overall exposure level for mosquitto.service: 1.1 OK 🙂
This is supeer useful to allow the normal sd-image code to be used by
someone who wants to setup multiple partitions with a sd-image.
Currently I'm manually copying the sd-image file and modifying it
instead.
Standard best-practice shell quoting, which can prevent the most
horrible production accidents.
Note that we cannot use `+ optionalString someBool '' someString''`
because Nix's multi-line ''double-quoted'' strings remove leading
whitespace.
This ensures that newly created secrets will have the permissions
`0640`. With this change it's ensured that no sensitive information will
be word-readable at any time.
Related to #121293.
Strictly speaking this is a breaking change since each new directory
(including data-files) aren't world-readable anymore, but actually these
shouldn't be, unless there's a good reason for it.
This is what is still exposed, and it allows me to control my lamps from
within home-assistant.
✗ PrivateNetwork= Service has access to the host's network 0.5
✗ RestrictAddressFamilies=~AF_(INET|INET6) Service may allocate Internet sockets 0.3
✗ DeviceAllow= Service has a device ACL with some special devices 0.1
✗ IPAddressDeny= Service does not define an IP address allow list 0.2
✗ PrivateDevices= Service potentially has access to hardware devices 0.2
✗ RootDirectory=/RootImage= Service runs within the host's root directory 0.1
✗ SupplementaryGroups= Service runs with supplementary groups 0.1
✗ MemoryDenyWriteExecute= Service may create writable executable memory mappings 0.1
→ Overall exposure level for zigbee2mqtt.service: 1.3 OK 🙂
Until now, the `touch + chmod 600 + write` approach made it possible for
an unprivileged local user read the private key file, by opening
the file after the touch, before the read permissions are restricted.
This was only the case if `generatePrivateKeyFile = true` and the parent
directory of `privateKeyFile` already existed and was readable.
This commit fixes it by using `umask`, which ensures kernel-side that
the `touch` creates the file with the correct permissions atomically.
This commit also:
* Removes `mkdir --mode 0644 -p "${dirOf values.privateKeyFile}"`
because setting permissions `drw-r--r--` ("nobody can enter that dir")
is awkward. `drwx------` would perhaps make sense, like for `.ssh`.
However, setting the permissions on the private key file is enough,
and likely better, because `privateKeyFile` is about that file
specifically and no docs suggest that there's something special
about its parent dir.
* Removes the `chmod 0400 "${values.privateKeyFile}"`
because there isn't really a point in removing write access from
the owner of the private key.
- Set an explicit umask that allows u+rwx and g+r.
- Adds `ProtectControlGroups` and `ProtectKernelLogs`, there should be
no need to access either.
- Adds `ProtectClock` to prevent write-access to the system clock.
- `ProtectProc` hides processes from other users within the /proc
filesystem and `ProcSubSet` hides all files/directories unrelated to
the process management of the units process.
- Sets `RemoveIPC`, as there is no SysV or POSIX IPC within nginx that I
know of.
- Restricts the creation of arbitrary namespaces
- Adds a reasonable `SystemCallFilter` preventing calls to @privileged,
@obsolete and others.
And finally applies some sorting based on the order these options appear
in systemd.exec(5).
