Shea Levy
17f10f70ad
Include xhci_hcd in the initrd for usb3 devices
...
Fixes #158 , I don't think there is an `xhci' module
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-05-04 11:35:01 -04:00
Shea Levy
faa064dbc7
32-bit gummiboot uses lower-case ia32
...
Thanks to iElectric in the channel for pointing it out
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-05-04 11:26:56 -04:00
Phreedom
7190c867d6
Merge pull request #156 from modulistic/master
...
typo in networking.dnsSingleRequest documentation
2013-05-04 02:34:28 -07:00
modulistic
bdb22d37f1
typo in networking.dnsSingleRequest documentation
2013-05-04 11:26:56 +02:00
Evgeny Egorochkin
4b69de4a3d
VirtualBox: udev rule to populate /dev/vboxusb.
...
After Linux 3.2(?), /proc/bus/usb (and usbfs (or usbdevfs?)) went away,
leaving virtualbox no way to determine what USB devices were connected
to the system. The solution was to add some virtualbox specific udev
rules to populate /dev/vboxusb with what was in /proc/bus/usb before.
Patch contributed by Jack Cummings.
2013-05-04 12:20:46 +03:00
Domen Kožar
01887f2c86
Merge pull request #100 from jcumming/hostapd.130224
...
proper hostapd dependencies
2013-05-04 01:38:45 -07:00
Rok Garbas
f5e720aba8
adding sensor option to thinkfan
2013-05-03 03:28:04 +02:00
Shea Levy
2415787040
gummiboot: Fix bug where old conf scripts for single-digit generations weren't removed
...
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-04-30 13:03:14 -04:00
Shea Levy
9bc021ceda
Set the firmware_class path in modprobe.d
...
Activation scripts are run before systemd is started, so unless users
are loading firmware in the initrd (which AFAICT we currently have no
support for) the previous /sys-based setting of firmware_class was
ineffective on boot.
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-04-30 11:46:34 -04:00
Peter Simons
ebb9f0e3fc
atd: add "batch" to the list of programs that need a setuid wrapper
2013-04-27 22:42:19 +02:00
Lluís Batlle i Rossell
4637f6d878
Removing unneded imports for the display-manager.
...
Discussed in
2e088aa277 (commitcomment-3074283)
2013-04-28 00:19:04 +04:00
Domen Kožar
f34d79c351
Merge pull request #150 from bjornfor/nixos-install-fix-errormsg
...
nixos-install: fix error message consistency
2013-04-27 09:14:50 -07:00
Domen Kožar
c4ead79dd6
Merge pull request #149 from NixOS/networkmanager_suspend
...
restart networkmanager on suspend resume
2013-04-27 09:13:15 -07:00
Lluís Batlle i Rossell
af0e751ee9
Making gnunet start properly (calling gnunet-service-arm directly)
2013-04-24 20:17:14 +04:00
Lluís Batlle i Rossell
f50014339a
Putting the gnunet module up to date. It still doesn't start gnunet though.
...
No idea why.
2013-04-24 19:03:29 +04:00
Bjørn Forsman
ec13407807
nixos-install: fix error message consistency
...
The test is for path A but the error message says path B. Fix it.
2013-04-22 22:06:27 +02:00
Lluís Batlle i Rossell
b4af56d376
lightdm: improving a bit the indentation.
2013-04-22 23:32:11 +04:00
Oliver Charles
2e088aa277
lightdm: Initial expression for lightdm as the display-manager service (using default GTK greeter)
2013-04-22 23:32:10 +04:00
Domen Kozar
ec9dc730ec
restart networkmanager on suspend resume
2013-04-22 19:36:14 +02:00
Eelco Dolstra
447691836a
Create a /etc/zoneinfo symlink and use it in $TZDIR
...
Setting $TZDIR to ${pkgs.tzdata}/share/zoneinfo can cause logged-in
sessions to refer to a garbage-collected zoneinfo directory. So use
/etc/zoneinfo instead.
2013-04-22 19:08:16 +02:00
Eelco Dolstra
945849b86f
Don't set $TZ
...
We don't need to set $TZ, because we have /etc/localtime. In fact,
setting $TZ without $TZDIR doesn't work anymore since Glibc no longer
contains zone info.
2013-04-22 18:56:19 +02:00
Evgeny Egorochkin
fa0f5bf72f
Freenet: fix 2 typos
2013-04-22 16:50:58 +03:00
Mathijs Kwik
ae2f280b67
cron: set TZDIR so cron is able to find the TZ
2013-04-22 14:24:15 +02:00
Mathijs Kwik
006f328877
virtual network interfaces: make systemd aware of the relation between device and service
...
If I want to bring down tap0.service (or systemd wants to do this
during a configuration-change which changes the path to tunctl),
openvpn (or other services using tap0) need to be brought down as
well, otherwise tunctl -d is not able to remove the tap0 device,
leaving it in a failed (but "up") state.
2013-04-22 14:24:15 +02:00
Mathijs Kwik
8de00c328a
systemd: add "requiredBy" option.
...
"require" is a stronger version of "want",
and just like wantedBy allows you to specify this relation in reverse,
requiredBy does the same.
It may seem pointless to be able to specify these stronger relations in
reverse, because if something is really required, you would expect the
other unit to specify this himself.
However, this is still useful for virtual/automatic units (like
devices) that are created by systemd on demand and hence have no unit
file you can alter.
2013-04-22 14:24:15 +02:00
Peter Simons
8c702b7c28
Merge pull request #147 from offlinehacker/nameservers
...
Static nameservers should have precedence
2013-04-22 02:16:11 -07:00
Jaka Hudoklin
b230153cfd
Merge branch 'master' of https://github.com/NixOS/nixos into nameservers
...
Conflicts:
modules/tasks/network-interfaces.nix
2013-04-21 20:02:26 +02:00
Jaka Hudoklin
7427639b84
Static nameservers have precedence
2013-04-21 19:48:15 +02:00
Lluís Batlle i Rossell
7a71320a9c
Adding freenet module
2013-04-21 11:27:41 +04:00
Vladimír Čunát
41ccade531
Merge pull request #132 from ierton/udisks2-v2
...
add udisks2 for Xfce
2013-04-20 01:36:14 -07:00
Shea Levy
e32774c270
rabbitmq.nix: Set SYS_PREFIX empty so files live in /var
...
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-04-19 10:49:46 -04:00
viric
204f5a3f4c
Merge pull request #143 from viric/grub_all
...
Making grub display 'All configurations', not 'Old'
2013-04-17 08:05:09 -07:00
Lluís Batlle i Rossell
1caa1b96cb
network-interfaces: fixing a cat/EOF piping confusion
2013-04-17 09:10:41 +02:00
Lluís Batlle i Rossell
927a3e3ff2
fcron: fixing the startOn, since upstart times.
2013-04-17 00:21:19 +02:00
Marco Maggesi
04415eb582
Remove obsolete option in Xen domU module
2013-04-16 19:46:22 +02:00
Shea Levy
cc1ae918bd
Fix cut-off comment in generated configuration.nix
...
Pointed out by Mathnerd626 on irc
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-04-16 13:34:37 -04:00
Moritz Ulrich
89cf51f2a4
Forgot semicolon. (M)
...
Signed-off-by: Moritz Ulrich <moritz@tarn-vedra.de>
2013-04-16 17:37:36 +02:00
Moritz Ulrich
4be036ca64
ssmtp: Add AuthUser and AuthPass options.
...
Signed-off-by: Moritz Ulrich <moritz@tarn-vedra.de>
2013-04-16 17:01:35 +02:00
Lluís Batlle i Rossell
3be4fd3f38
Making grub display 'All configurations', not 'Old'
...
That confused some people, as the first generation shown is
the 'current'.
2013-04-16 11:09:25 +02:00
viric
7d2ec75ae7
Merge pull request #128 from pSub/bitlbee
...
Bitlbee: updated for systemd; added more options like AuthMode
2013-04-14 12:49:18 -07:00
Domen Kožar
25cd3579cb
Merge pull request #141 from orbitz/fix-nginx-required-config
...
Fix nginx required config
2013-04-14 02:28:23 -07:00
orbitz
388d83c586
Set required nginx options and sane default
2013-04-14 11:17:16 +02:00
orbitz
8e7bb847c6
Cleanup whitespaces
2013-04-14 11:14:27 +02:00
Jack Cummings
edc12de8c9
add wantedBy network.target so that hostapd starts by default
2013-04-12 23:25:32 -07:00
Shea Levy
ce8c145a98
nixos-install: Include nix's perl libs in perl's INC
...
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-04-11 16:18:24 -04:00
Shea Levy
6e0723bac6
nixos-install: Mound nixos and nixpkgs src directly
...
Previously nixos-install would fail if nixos and nixpkgs weren't on the same mountpoint as /
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-04-11 16:12:43 -04:00
Eelco Dolstra
e28b0453bf
MediaWiki: Update to 1.20.3
2013-04-11 17:29:34 +02:00
Eelco Dolstra
56e678725d
Remove Upstart reference
2013-04-11 17:29:34 +02:00
Peter Simons
e627d309fd
bash-completion: support the "$out/share/bash-completion" location used by modern packages
2013-04-11 00:48:58 +02:00
Marc Weber
9bf073b58b
s/boot.grubDevice/boot.loader.grub.device/ to shut down warnings
2013-04-10 23:54:37 +02:00