The merge of the version bump in
6fb9f89238 didn't take care of our patch
for the hardening mode and thus enabling VirtualBox without also
force-disabling hardening mode will result in a build error.
While the patch is largely identical with the old version, I've removed
one particular change around the following code:
if (pFsObjState->Stat.st_mode & S_IWOTH)
return supR3HardenedSetError3(VERR_SUPLIB_WORLD_WRITABLE, pErrInfo,
"World writable: '", pszPath, "'");
In the old version of the patch we have checked whether the path is
within the Nix store and suppressed the error return if that's the case.
The reason why I did that in the first place was because we had a bunch
of symlinks which were writable.
In VirtualBox 5.1.22 the code specifically checks whether the file is a
symlink, so we can safely drop our change.
Tested via all of the "virtualbox" NixOS VM subtests and they now all
succeed.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
XSA-206 Issue Description:
> xenstored supports transactions, such that if writes which would
> invalidate assumptions of a transaction occur, the entire transaction
> fails. Typical response on a failed transaction is to simply retry
> the transaction until it succeeds.
>
> Unprivileged domains may issue writes to xenstore which conflict with
> transactions either of the toolstack or of backends such as the driver
> domain. Depending on the exact timing, repeated writes may cause
> transactions made by these entities to fail indefinitely.
More: https://xenbits.xen.org/xsa/advisory-206.html
XSA-211 Issue Description:
> When a graphics update command gets passed to the VGA emulator, there
> are 3 possible modes that can be used to update the display:
>
> * blank - Clears the display
> * text - Treats the display as showing text
> * graph - Treats the display as showing graphics
>
> After the display geometry gets changed (i.e., after the CIRRUS VGA
> emulation has resized the display), the VGA emulator will resize the
> console during the next update command. However, when a blank mode is
> also selected during an update, this resize doesn't happen. The resize
> will be properly handled during the next time a non-blank mode is
> selected during an update.
>
> However, other console components - such as the VNC emulation - will
> operate as though this resize had happened. When the display is
> resized to be larger than before, this can result in a heap overflow
> as console components will expect the display buffer to be larger than
> it is currently allocated.
More: https://xenbits.xen.org/xsa/advisory-211.html
XSA-212 Issue Description:
> The XSA-29 fix introduced an insufficient check on XENMEM_exchange
> input, allowing the caller to drive hypervisor memory accesses outside
> of the guest provided input/output arrays.
More: https://xenbits.xen.org/xsa/advisory-212.html
XSA-213 Issue Description:
> 64-bit PV guests typically use separate (root) page tables for their
> kernel and user modes. Hypercalls are accessible to guest kernel
> context only, which certain hypercall handlers make assumptions on.
> The IRET hypercall (replacing the identically name CPU instruction)
> is used by guest kernels to transfer control from kernel mode to user
> mode. If such an IRET hypercall is placed in the middle of a multicall
> batch, subsequent operations invoked by the same multicall batch may
> wrongly assume the guest to still be in kernel mode. If one or more of
> these subsequent operations involve operations on page tables, they may
> be using the wrong root page table, confusing internal accounting. As
> a result the guest may gain writable access to some of its page tables.
More: https://xenbits.xen.org/xsa/advisory-213.html
XSA-214 Issue Description:
> The GNTTABOP_transfer operation allows one guest to transfer a page to
> another guest. The internal processing of this, however, does not
> include zapping the previous type of the page being transferred. This
> makes it possible for a PV guest to transfer a page previously used as
> part of a segment descriptor table to another guest while retaining the
> "contains segment descriptors" property.
>
> If the destination guest is a PV one of different bitness, it may gain
> access to segment descriptors it is not normally allowed to have, like
> 64-bit code segments in a 32-bit PV guest.
>
> If the destination guest is a HVM one, that guest may freely alter the
> page contents and then hand the page back to the same or another PV
> guest.
>
> In either case, if the destination PV guest then inserts that page into
> one of its own descriptor tables, the page still having the designated
> type results in validation of its contents being skipped.
More: https://xenbits.xen.org/xsa/advisory-214.html
XSA-215 Issue Description:
> Under certain special conditions Xen reports an exception resulting
> from returning to guest mode not via ordinary exception entry points,
> but via a so call failsafe callback. This callback, unlike exception
> handlers, takes 4 extra arguments on the stack (the saved data
> selectors DS, ES, FS, and GS). Prior to placing exception or failsafe
> callback frames on the guest kernel stack, Xen checks the linear
> address range to not overlap with hypervisor space. The range spanned
> by that check was mistakenly not covering these extra 4 slots.
More: https://xenbits.xen.org/xsa/advisory-215.html
Recent commit #c10af9e744c91dff1ccc07a52a0b57d1e4d339f3 changed the
behaviour of wrapPythonPrograms, which caused pygrub to no longer
being wrapped. This commit fixes this.
- Moves to a more recent kernel (4.10, I think ...)
- API break re the previous version
- cptofs: fix root directory copy
- add support for disks with custom ops
- add LKL_HIJACK_NET_QDISC to configure qdisc policy
- add LKL_HIJACK_SYSCTL to configure sysctl values
OVMF{,CODE,VARS}.fd are now available in a dedicated fd output, greatly
reducing the closure in the common case where only those files are used (a
few MBs versus several hundred MBs for the full OVMF).
Note: it's unclear why `dontPatchELF` is now necessary for the build to
pass (on my end, at any rate) but it doesn't make much sense to run this
fixup anyway,
Note: my reading of xen's INSTALL suggests that --with-system-ovmf should
point directly to the OVMF binary. As such, the previous invocation was
incorrect (it pointed to the root of the OVMF tree). In any case, I have
only built xen with `--with-system-ovmf`, I have not tested it.
Fixes https://github.com/NixOS/nixpkgs/issues/25854
Closes https://github.com/NixOS/nixpkgs/pull/25855
OVMF is built from edk2 sources so that's where its version number comes
from (logically). The edk2 version number is 2014-12-10, so this change
only ensures the version numbers won't drift apart in the future. (There
is no hash change.)
