Commit graph

41 commits

Author SHA1 Message Date
Nicolas Pierron
b02cf8d20e Check that 'mdadm --assemble' is effective before continuing.
svn path=/nixos/trunk/; revision=19339
2010-01-10 19:36:53 +00:00
Eelco Dolstra
cac502e35b * Okay, so we do need an "lvm" task to run vgscan/vgchange. It's only
needed though for devices that were not already found and activated
  in the initrd.

svn path=/nixos/trunk/; revision=19337
2010-01-10 19:14:42 +00:00
Eelco Dolstra
cf06d2b9cf * Don't start the filesystems task on a startup event. It's pointless
to do so until udev has created device nodes.

svn path=/nixos/trunk/; revision=19332
2010-01-10 18:23:13 +00:00
Eelco Dolstra
6f8a3ba7c7 * Create devicemapper/lvm device nodes from udev (using the rules
supplied by the lvm package).  This makes the "lvm" Upstart task
  unnecessary.  Also, we now get /dev/disk/by-{label,uuid} symlinks
  for LVM logical disks.

svn path=/nixos/trunk/; revision=19300
2010-01-07 22:39:35 +00:00
Eelco Dolstra
0595b7f89d * devicemapper -> lvm2.
svn path=/nixos/trunk/; revision=19294
2010-01-07 16:14:50 +00:00
Eelco Dolstra
9a0789a81e * Add devicemapper to the system path.
svn path=/nixos/trunk/; revision=19292
2010-01-07 15:55:05 +00:00
Eelco Dolstra
ed7d096624 * Resolve $device (e.g. from /dev/disk/by-label/foo -> /dev/sda2),
because /proc/swaps contains resolved paths as well.  Without this,
  the swap device will be turned off again by the $unused code.

svn path=/nixos/trunk/; revision=19278
2010-01-06 22:41:59 +00:00
Nicolas Pierron
81d621b4f7 * Replace blowfish by AES, since recent CPU could have optimisation for it.
* Miss-interpretation of the --skip option of cryptsetup.  Ciphered partition labels are not supported.  Labels are erased when doing mkswap on the ciphered partition.
* Avoid doing swapon on devices which are already listed in /proc/swaps.
* Remove no longer listed devices with only one swapoff command.

svn path=/nixos/trunk/; revision=19164
2009-12-31 13:56:47 +00:00
Sander van der Burg
df21f0f06d Made a small fix because I kept receiving errors about: diff command not found. It also makes my system horribly slow.
svn path=/nixos/trunk/; revision=19148
2009-12-29 21:23:22 +00:00
Nicolas Pierron
4cf78fdb77 * Use postStart instead of preStart.
* Assemble devices only if there is a new entry.
* Add 'new-raid-array' flag to assemble new arrays.
* Emit new-devices flag to triggers the 'filesystems' task.

svn path=/nixos/trunk/; revision=19145
2009-12-29 14:10:05 +00:00
Nicolas Pierron
e70214c853 Remove loop of new-device messages. Add a shell script to watch new devices.
svn path=/nixos/trunk/; revision=19142
2009-12-29 10:04:54 +00:00
Nicolas Pierron
246dae96fe Add an option to cipher swap partitions.
! Not tested yet: cryptsetup depends on a missing
! udev binary.

svn path=/nixos/trunk/; revision=19131
2009-12-26 16:20:00 +00:00
Eelco Dolstra
d545d08461 * In the network-interfaces task, emit an ip-up event if there is a
statically configured interface (i.e. we're not running dhclient).
  Otherwise the ntpd job won't be triggered.
* Use the "-n" flag of "initctl emit" to send the event
  asynchronously.

svn path=/nixos/branches/upstart-0.6/; revision=18227
2009-11-06 21:38:40 +00:00
Eelco Dolstra
676da4d87d * Updated some more jobs.
svn path=/nixos/branches/upstart-0.6/; revision=18219
2009-11-06 19:20:09 +00:00
Eelco Dolstra
9fa2f12cc2 * Do some more jobs.
svn path=/nixos/branches/upstart-0.6/; revision=18212
2009-11-06 15:46:56 +00:00
Eelco Dolstra
7011a9315f * Use Upstart 0.6. Jobs are now in /etc/init instead of /etc/event.d.
svn path=/nixos/branches/upstart-0.6/; revision=18192
2009-11-06 10:43:38 +00:00
Eelco Dolstra
b86e8208d5 * Doh! The mount options weren't passed properly.
svn path=/nixos/trunk/; revision=18047
2009-10-30 08:49:35 +00:00
Nicolas Pierron
c195493a32 * Add a hacky for-loop to fix the usage of the continue keyword. (NIXOS-85)
The continue keyword was previously used to mount the next device, but
  the loop in has been removed. (see r17919)

svn path=/nixos/trunk/; revision=17973
2009-10-27 10:45:18 +00:00
Eelco Dolstra
1e1ae9cd1e * Don't squeeze all the filesystem option values into one environment
variable, since they might get confused (NIXOS-84).

svn path=/nixos/trunk/; revision=17919
2009-10-22 07:46:30 +00:00
Eelco Dolstra
eba8f94069 * jobAttrs -> jobs.
svn path=/nixos/trunk/; revision=17769
2009-10-12 18:09:34 +00:00
Eelco Dolstra
d982f23f20 * Convert the remaining jobs to jobAttrs style.
svn path=/nixos/trunk/; revision=17764
2009-10-12 17:27:57 +00:00
Eelco Dolstra
e91d882a94 * Converted modules that were still using the old (concrete syntax)
style of declaring Upstart jobs.  While at it, converted them to the
  current NixOS module style and improved some option descriptions.
  Hopefully I didn't break too much :-)

svn path=/nixos/trunk/; revision=17761
2009-10-12 16:36:19 +00:00
Eelco Dolstra
fdab662659 * Add iproute to the system path. It was a dependency of dhclient
already anyway.

svn path=/nixos/trunk/; revision=17512
2009-09-29 15:43:52 +00:00
Eelco Dolstra
684eb63658 * fsck is no longer in e2fsprogs.
* Don't try to remount CIFS filesystems.
* For devices specified by label, use /dev/disk/by-label instead of
  LABEL=.  The initrd already did this.
* Improved the flagging of pseudo devices.

svn path=/nixos/trunk/; revision=17431
2009-09-25 22:38:37 +00:00
Eelco Dolstra
38898d5304 * r17391 changed the mingetty ttys to device names instead of tty
numbers.  This also requires kbd and tty-backgrounds to be updated
  (and by extension syslogd and rogue).  Also updated the style of
  those modules.

svn path=/nixos/trunk/; revision=17424
2009-09-25 19:55:08 +00:00
Eelco Dolstra
39d1b11ff7 * The mount hack is gone, just use the regular mount from
util-linux-ng and make sure that the needed mount helpers
  (e.g. ntfs3g) are in /var/lib/current-system/sw/sbin.

svn path=/nixos/trunk/; revision=16690
2009-08-11 21:10:33 +00:00
Eelco Dolstra
b58682401e * Give a type to networking.interfaces.
* Simplified the pre-start script of the network-interfaces module.
* Removed wireless support from the network-interfaces module.  It
  only worked for static WEP configurations anyway, and AFAIK nobody
  used it.

svn path=/nixos/branches/modular-nixos/; revision=16406
2009-07-16 17:18:54 +00:00
Eelco Dolstra
6119c399d8 * Support tasks in the new Upstart formalism.
* Swap task: fixed removing disabled swap devices.
* Swap task: specified the type of swapDevices.

svn path=/nixos/branches/modular-nixos/; revision=16396
2009-07-16 14:51:49 +00:00
Eelco Dolstra
bb292fdf04 * Support post-stop actions.
svn path=/nixos/branches/modular-nixos/; revision=16393
2009-07-16 13:46:49 +00:00
Eelco Dolstra
0e3bef4195 * Declare the type of jobs.
svn path=/nixos/branches/modular-nixos/; revision=16375
2009-07-15 13:41:00 +00:00
Eelco Dolstra
ca8e00cafa * Got rid of the extraPath field in jobs (use
environment.systemPackages instead).  Also renamed
  services.extraJobs to jobs.

svn path=/nixos/branches/modular-nixos/; revision=16370
2009-07-15 11:19:11 +00:00
Eelco Dolstra
b84bab7873 * Use the relatime mount option by default. (This is the default
anyway in Linux 2.6.30.)

svn path=/nixos/branches/modular-nixos/; revision=16348
2009-07-14 12:07:17 +00:00
Eelco Dolstra
9704472d1c Some hacks to support clean shutdowns of VMs that mount the Nix store
ove QEMU (and other NixOS instances that use a remote filesystem like
NFS):

* Don't take down the network interfaces during shutdown.
* Don't try to unmount the Nix store.  Usually, this doesn't work
  because it's still in use, but on remote filesystems like CIFS the
  `-f' umount flag actually works.

svn path=/nixos/branches/modular-nixos/; revision=16036
2009-06-24 13:33:03 +00:00
Eelco Dolstra
f258edcb80 * autocreate should be a boolean.
svn path=/nixos/branches/modular-nixos/; revision=15956
2009-06-14 11:07:44 +00:00
Nicolas Pierron
4001b66c88 Move the option declaration of filesystems.*.neededForBoot to boot/stage-1.nix.
svn path=/nixos/branches/modular-nixos/; revision=15940
2009-06-11 16:04:03 +00:00
Nicolas Pierron
0657b26ab1 Use types in to improve filesystems.nix
svn path=/nixos/branches/modular-nixos/; revision=15939
2009-06-11 16:03:57 +00:00
Eelco Dolstra
dbe229f3aa * $LOCALE_ARCHIVE needs to be set, otherwise the "locale" command will
fail and the ttys won't initialised in Unicode mode.

svn path=/nixos/branches/modular-nixos/; revision=15882
2009-06-05 17:18:20 +00:00
Eelco Dolstra
a4fa62aaf0 * The fileSystems option shouldn't have a default.
svn path=/nixos/branches/modular-nixos/; revision=15867
2009-06-05 13:30:30 +00:00
Eelco Dolstra
234c4340c2 * helpers -> lib.
svn path=/nixos/branches/modular-nixos/; revision=15797
2009-05-29 14:46:27 +00:00
Eelco Dolstra
c6c9304b95 * system/options.nix: gone :-)
svn path=/nixos/branches/modular-nixos/; revision=15772
2009-05-28 16:03:48 +00:00
Eelco Dolstra
fc9111fadf * Move various system initialisation tasks (e.g. mounting filesystems,
initialising network interfaces, etc.) to modules/tasks.  This
  follows the Upstart terminology: a service is a job that doesn't
  usually terminate (e.g. a daemon), while a task is a job that does
  some work and then exits.

svn path=/nixos/branches/modular-nixos/; revision=15771
2009-05-28 15:03:05 +00:00