Since v2021.5.0 home-assistant uses the ifaddr library in the zeroconf
component to enumerate network interfaces via netlink. Since discovery
is all over the place lets allow AF_NETLINK unconditionally.
It also relies on pyroute2 now, which additionally tries to access files
in /proc/net, so we relax ProtectProc a bit by default as well.
This leaves us with these options unsecured:
✗ PrivateNetwork= Service has access to the host's network 0.5
✗ RestrictAddressFamilies=~AF_(INET|INET6) Service may allocate Internet sockets 0.3
✗ DeviceAllow= Service has a device ACL with some special devices 0.1
✗ IPAddressDeny= Service does not define an IP address allow list 0.2
✗ PrivateDevices= Service potentially has access to hardware devices 0.2
✗ PrivateUsers= Service has access to other users 0.2
✗ SystemCallFilter=~@resources System call allow list defined for service, and @resources is included (e.g. ioprio_set is allowed) 0.2
✗ RestrictAddressFamilies=~AF_NETLINK Service may allocate netlink sockets 0.1
✗ RootDirectory=/RootImage= Service runs within the host's root directory 0.1
✗ SupplementaryGroups= Service runs with supplementary groups 0.1
✗ RestrictAddressFamilies=~AF_UNIX Service may allocate local sockets 0.1
✗ ProcSubset= Service has full access to non-process /proc files (/proc subset=) 0.1
→ Overall exposure level for home-assistant.service: 1.6 OK 🙂
libbrotli wasn't listed as a dependency for the AppArmor profile of the transmission-daemon binary.
As a result, transmission wouldn't run and would fail, logging this audit message to dmesg:
audit[11595]: AVC apparmor=DENIED operation=open profile=/nix/store/08i1rmakmnpwyxpvp0sfc5hcm106am7w-transmission-3.00/bin/transmission-daemon name=/proc/11595/environ pid=11595 comm=transmission-da requested_mask=r denied_mask=r fsuid=70 ouid=70
This reverts commit d9e18f4e7f.
This change is broken, since it doesn't configure the proper database
username in keycloak when provisioning a local database with a custom
username. Its intended behavior is also potentially confusing and
dangerous, so rather than fixing it, let's revert to the old one.
This adds a basic test for Sway. Because Sway is an important part of
the Wayland ecosystem, is stable, and has few dependencies this test
should also be suitable for testing core packages it depends on (e.g.
wayland, wayland-protocols, wlroots, xwayland, mesa, libglvnd, libdrm,
and soon libseat).
The test is modeled after the suggested way of using Sway, i.e. logging
in via a virtual console (tty1) and copying the configuration from
/etc/sway/config (we replace Mod4 (the GNU/Tux key - you've replaced
that evil logo, right? :D) with Mod1 (Alt key) because QEMU monitor's
sendkey command doesn't support the former).
The shell aliases are used to make the sendkey log output shorter.
Co-authored-by: Patrick Hilhorst <git@hilhorst.be>
On my system I have XWayland disabled and therefore only WAYLAND_DISPLAY
is set. This ensures that the graphical output will still be enabled on
such setups (both Wayland and X11 are supported by the viewer).
The radicale version is no longer chosen automatically based on
system.stateVersion because that gave the impression that old versions
are still supported.
Follow RFC 42 by having a settings option that is
then converted into an unbound configuration file
instead of having an extraConfig option.
Existing options have been renamed or kept if
possible.
An enableRemoteAccess has been added. It sets remote-control setting to
true in unbound.conf which in turn enables the new wrapping of
unbound-control to access the server locally. Also includes options
'remoteAccessInterfaces' and 'remoteAccessPort' for remote access.
Signed-off-by: Marc 'risson' Schmitt <marc.schmitt@risson.space>
This is a patch I filed against upstream[1] a while ago. As it isn't
merged yet and fixes configurations with all stats enabled in knot
(otherwise it'd crash when sending a request to `localhost:9433`), I
decided that it makes sense to add it to the package directly.
I extended the test to make sure that it only passes with this patch.
[1] https://github.com/ghedo/knot_exporter/pull/6
The reap function culls expired pastes outside of the process serving
the pastes. Previously the database could accumulate a large number of
pastes and while they were expired they would not be deleted unless
accessed from the frontend.
Individual settings would previously overwrite the whole config, but
now individual values can be overwritten.
Fix missing slash to make the database path an absolute path per
https://docs.sqlalchemy.org/en/14/core/engines.html#sqlite.
Drop preferred_lexers, it's not set to anything meaningful anyway.
Currently, the installer tests just hang after the initial install phase
on i686 because qemu just quits because of the gic parameter.
Fix this by doing x86 things for both x86-64 and i686.
Home-assistant through its `--runner` commandline flag supports sending
exit code 100 when the `homeassistant.restart` service is called.
With `RestartForceExitStatus` we can listen for that specific exit code
and restart the whole systemd unit, providing an actual clean restart
with fresh processes. Additional treat exit code 100 as a successful
termination.
Configures the emulated_hue component and expects CAP_NET_BIND_SERVICE
to be passed in order to be able to bind to 80/tcp.
Also print the systemd security analysis, so we can spot changes more
quickly.
This is what is still exposed, and it should still allow things to work
as usual.
✗ PrivateNetwork= Service has access to the host's … 0.5
✗ RestrictAddressFamilies=~AF_(INET… Service may allocate Internet soc… 0.3
✗ DeviceAllow= Service has a device ACL with som… 0.1
✗ IPAddressDeny= Service does not define an IP add… 0.2
✗ PrivateDevices= Service potentially has access to… 0.2
✗ PrivateUsers= Service has access to other users 0.2
✗ SystemCallFilter=~@resources System call allow list defined fo… 0.2
✗ RootDirectory=/RootImage= Service runs within the host's ro… 0.1
✗ SupplementaryGroups= Service runs with supplementary g… 0.1
✗ RestrictAddressFamilies=~AF_UNIX Service may allocate local sockets 0.1
→ Overall exposure level for home-assistant.service: 1.6 OK :-)
This can grow to as much as ~1.9 if you use one of the bluetooth or nmap
trackers or the emulated_hue component, all of which required elevated
permisssions.
git-daemon won't start up if its project directory (here /git) doesn't
exist. If we try to create it using the test harness, then we're racing
whether we manage to connect to the backdoor vs. the startup speed of
git-daemon.
Instead, use systemd-tmpfiles, which is guaranteed(?) to run before
network.target and thus before git-daemon.service starts.
rspamd seems to be consuming more memory now sometimes, causing OOMs in
the test.
Increase the memory given to these VMs to make the tests pass more
reliably.
Postfix has started outputting an error on startup that it can't parse
the compatibility level 9999.
Instead, just set the compatibility level to be identical to the current
version, which seems to be the (new) intent for the compatibility level.
This test was failing because Firefox was displaying a download prompt
rather than the page content, presumably because mumble mumble
content-type sniffing.
By explicitly setting a content-type, the test now passes.
Looks like GRUB has issues loading EFI binaries from (cd0), which is
what would be used in e.g. qemu with OVMF with `-cdrom`. Apparently also
what is used with AArch64 + U-Boot USB.
The serial output (but it's named console, not serial actually) causes
issues on U-Boot's EFI, at the very least.
This is inspired by OpenSUSE's approach:
* https://build.opensuse.org/package/view_file/Base:System/grub2/grub2-SUSE-Add-the-t-hotkey.patch
Where they add a hidden menu entry, which can be used to force the
console output.
The `echo` will be visible on the serial terminal (grub "console"),
while the graphical interface is shown. Note that input in the serial
terminal (grub "console") will continue controlling the graphical
interface. Useful if you have an SBC connectedinto an HDMI monitor, but
no keyboard connected to it.
- In order to use GIO/GVFS it is enough to enable the gvfs service.
- The module option services.gvfs.package can be used to choose a
variation of the gvfs package, if desired.
See [0]: "QEMU_OPTS is something that should be set by people running VM
tests interactively, to do port forwardings etc.
We really should not poke with it from the test script - that's what
virtualisation.qemu.options is for."
[0]: https://github.com/NixOS/nixpkgs/pull/119615#discussion_r624145020
Co-authored-by: Florian Klink <flokli@flokli.de>
Fixes these two deprecation warnings, by moving away from these options
towards a simple listener configuration.
> The 'bind_address' option is now deprecated and will be removed in a future version. The behaviour will default to true.
> The 'port' option is now deprecated and will be removed in a future version. Please use 'listener' instead.
Fixes: #120860
It can still network, it can only access the ssl related files if ssl is
enabled.
✗ PrivateNetwork= Service has access to the host's network 0.5
✗ RestrictAddressFamilies=~AF_(INET|INET6) Service may allocate Internet sockets 0.3
✗ DeviceAllow= Service has a device ACL with some special devices 0.1
✗ IPAddressDeny= Service does not define an IP address allow list 0.2
✗ RootDirectory=/RootImage= Service runs within the host's root directory 0.1
✗ RestrictAddressFamilies=~AF_UNIX Service may allocate local sockets 0.1
→ Overall exposure level for mosquitto.service: 1.1 OK 🙂
This allows us to continue to have the automatically sized image attempt
to build on Hydra, which should give us a good indication of when we've
got this fixed.
For reasons we haven't been able to work out, the aarch64 EC2 image now
regularly exceeds the output image size on hydra.nixos.org. As a
workaround, set this back to being statically sized again.
The other images do seem to build - it's just a case of the EC2 image
now being too large (occasionally non-determinstically).
This is supeer useful to allow the normal sd-image code to be used by
someone who wants to setup multiple partitions with a sd-image.
Currently I'm manually copying the sd-image file and modifying it
instead.
This ensures that newly created secrets will have the permissions
`0640`. With this change it's ensured that no sensitive information will
be word-readable at any time.
Related to #121293.
Strictly speaking this is a breaking change since each new directory
(including data-files) aren't world-readable anymore, but actually these
shouldn't be, unless there's a good reason for it.
This is what is still exposed, and it allows me to control my lamps from
within home-assistant.
✗ PrivateNetwork= Service has access to the host's network 0.5
✗ RestrictAddressFamilies=~AF_(INET|INET6) Service may allocate Internet sockets 0.3
✗ DeviceAllow= Service has a device ACL with some special devices 0.1
✗ IPAddressDeny= Service does not define an IP address allow list 0.2
✗ PrivateDevices= Service potentially has access to hardware devices 0.2
✗ RootDirectory=/RootImage= Service runs within the host's root directory 0.1
✗ SupplementaryGroups= Service runs with supplementary groups 0.1
✗ MemoryDenyWriteExecute= Service may create writable executable memory mappings 0.1
→ Overall exposure level for zigbee2mqtt.service: 1.3 OK 🙂
Until now, the `touch + chmod 600 + write` approach made it possible for
an unprivileged local user read the private key file, by opening
the file after the touch, before the read permissions are restricted.
This was only the case if `generatePrivateKeyFile = true` and the parent
directory of `privateKeyFile` already existed and was readable.
This commit fixes it by using `umask`, which ensures kernel-side that
the `touch` creates the file with the correct permissions atomically.
This commit also:
* Removes `mkdir --mode 0644 -p "${dirOf values.privateKeyFile}"`
because setting permissions `drw-r--r--` ("nobody can enter that dir")
is awkward. `drwx------` would perhaps make sense, like for `.ssh`.
However, setting the permissions on the private key file is enough,
and likely better, because `privateKeyFile` is about that file
specifically and no docs suggest that there's something special
about its parent dir.
* Removes the `chmod 0400 "${values.privateKeyFile}"`
because there isn't really a point in removing write access from
the owner of the private key.
- Set an explicit umask that allows u+rwx and g+r.
- Adds `ProtectControlGroups` and `ProtectKernelLogs`, there should be
no need to access either.
- Adds `ProtectClock` to prevent write-access to the system clock.
- `ProtectProc` hides processes from other users within the /proc
filesystem and `ProcSubSet` hides all files/directories unrelated to
the process management of the units process.
- Sets `RemoveIPC`, as there is no SysV or POSIX IPC within nginx that I
know of.
- Restricts the creation of arbitrary namespaces
- Adds a reasonable `SystemCallFilter` preventing calls to @privileged,
@obsolete and others.
And finally applies some sorting based on the order these options appear
in systemd.exec(5).
See #119615 for more details. The aarch64-linux test failed with
"qemu-system-aarch64: Virtio VGA not available" so I've restricted the
test to x86_64-linux (the virtio paravirtualized 3D graphics driver is
likely only available on very few platforms).
The result still looks far from ideal but at least it gets recognized
now. "-fa Monospace" is required to switch to a font from the FreeType
library so that "-fs 24" works.
Note: Using linuxPackages_latest is not required anymore.
