I hope this will be a temporary measure. If there is consensus around
issue #33599, then we can follow an explicit `dontCheck`, but default to
not checking during cross builds when none is given.
This accounts for all the new dependencies and propagation logic changes
I'm about to add.
Fixes #1915---with this change I think the distinction is finally clear
enough.
This removes some stale code that was a no-op for some time and adds
some docs/examples to help people with explicitly and consistently
choosing versions of some emacs packages (to help with problems
similar to #27083).
Also add a wrapper generator that allows adding the plugins back
conveniently and corresponding documentation in the package notes
section of the nixpkgs manual.
The biggest benefit is that we no longer have to update the registry
package. This means that just about any cargo package can be built by
nix. No longer does `cargo update` need to be feared because it will
update to packages newer then what is available in nixpkgs.
Instead of fetching the cargo registry this bundles all the source code
into a "vendor/" folder.
This also uses the new --frozen and --locked flags which is nice.
Currently cargo-vendor only provides binaries for Linux and
macOS 64-bit. This can be solved by building it for the other
architectures and uploading it somewhere (like the NixOS cache).
This also has the downside that it requires a change to everyone's deps
hash. And if the old one is used because it was cached it will fail to
build as it will attempt to use the old version. For this reason the
attribute has been renamed to `cargoSha256`.
Authors:
* Kevin Cox <kevincox@kevincox.ca>
* Jörg Thalheim <Mic92@users.noreply.github.com>
* zimbatm <zimbatm@zimbatm.com>
Commit 8537cf0f81
("CONTRIBUTING.md: suggest "nixos/<module>" prefix for NixOS changes")
only changed CONTRIBUTING.md file and forgot about the Nixpkgs manual.
(I didn't know this information was stored in two places.)
The main motivation for this is to have something to google for LD=$CC.
Eventually, this should probably be moved to another section, but we
can deal with that later.
1. Call `nix-build` with `--no-out-link` to avoid cluttering the source dir.
2. Re-add `patchShebangs`, since `buildCommand` doesn't imply a patch phase. (It was my fault to remove this in the first place, sorry!)
This allows one to always override the call to `buildPythonPackage`.
In the following example we create an environment where we have the `blaze` package using an older version of `pandas`. We override first the Python interpreter and pass `packageOverrides` which contains the overrides for packages in
the package set.
```
with import <nixpkgs> {};
(let
python = let
packageOverrides = self: super: {
pandas = super.pandas.overridePythonPackage(old: rec {
version = "0.19.1";
name = "pandas-${version}";
src = super.fetchPypi {
pname = "pandas";
inherit version;
sha256 = "08blshqj9zj1wyjhhw3kl2vas75vhhicvv72flvf1z3jvapgw295";
};
});
};
in pkgs.python3.override {inherit packageOverrides;};
in python.withPackages(ps: [ps.blaze])).env
```
1. 'wrapper' has been renamed to 'wrappedRuby', so use this instead.
2. mkDerivation isn't called with a 'src' attribute, so skip the 'unpackPhase' to avoid an error.
3. Simplify the build command. 'mkdir' and 'patchShebangs' don't need to be called explicitly.
So that helper scripts can be easily sourced in interactive shell
configuration. `autojump` package was already present and had the same
requirements for findind a `share` folders, so I took an inspiration
there.
I beleive this is a better alternative to:
- https://github.com/NixOS/nixpkgs/pull/25080
- https://github.com/NixOS/nixpkgs/pull/27058
Replacing `$out/share/shell` with `$bin/share/fzf` was necessary to
prevent dependency loop in produced derivations.
Packages get --host and --target by default, but can explicitly request
any subset to be passed as needed. See docs for more info.
rustc: Avoid hash breakage by using the old (ignored)
dontSetConfigureCross when not cross building
Improve beam docs:
* correct spelling
* update per pandoc changes
* capitalize titles
* capitalize BEAM throughout and use "the BEAM" when referring to the virtual machine.
* tweak grammar and phrasing
* reformat build-tools-rebar3 section
* add more links
* re-wrap <para>s
Also update <programlisting>s
* normalize whitespace
* don't double quote homepage
* use $ in all shell snippets
The documentation got a bit stale compared to actual contents of
nixpkgs. This commit focuses on updating existing docs, not on making
sure all details of beam packages are covered.
This section gives some details on how to setup an "environment"
without having to go through NixOS (although it could be used there
too). I’ve tried to make it straightforward and have a kind of
"tutorial" feel. Not sure if that’s appropriate for the manual, so any
recommended changes would be helpful.
This gives some basics on configuring Emacs within Nix. The
configuration is fairly long just to give a good idea of what’s going
on. I can trim out some of it if it’s not necessary. Note that there
is already a section for Emacs in the NixOS manual. However, this is
aimed at avoiding using modules altogether to make things easier for
non-NixOS users. This configuration should work on NixOS anyway,
however.
Fixes#24243Fixes#19956
Each bootstrapping stage ought to just depend on the previous stage, but
poorly-written compilers break this elegence. This provides an easy-enough
way to depend on the next stage: targetPackages. PLEASE DO NOT USE IT
UNLESS YOU MUST!
I'm hoping someday in a pleasant future I can revert this commit :)
* Update python.md
this makes it clear how to alter `attributes` by using `packageOverrides`
* Update python.md
* Update python.md
* Update python.md
* Update python.md
* Update python.md
* Update python.md
Fix code syntax highlighting by specifying language in every code block
and adding some context to Nix code blocks to make them valid
expressions. Use the same markup style for all code blocks. Reformat
some code blocks.
fixes#23535
- Describe the new `libsForQt5.callPackage` interface
- Emphasize that Qt dependencies must be imported unqualified
- Describe the new `kdeWrapper` wrapper generator
If a package's meta has `knownVulnerabilities`, like so:
stdenv.mkDerivation {
name = "foobar-1.2.3";
...
meta.knownVulnerabilities = [
"CVE-0000-00000: remote code execution"
"CVE-0000-00001: local privilege escalation"
];
}
and a user attempts to install the package, they will be greeted with
a warning indicating that maybe they don't want to install it:
error: Package ‘foobar-1.2.3’ in ‘...default.nix:20’ is marked as insecure, refusing to evaluate.
Known issues:
- CVE-0000-00000: remote code execution
- CVE-0000-00001: local privilege escalation
You can install it anyway by whitelisting this package, using the
following methods:
a) for `nixos-rebuild` you can add ‘foobar-1.2.3’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"foobar-1.2.3"
];
}
b) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘foobar-1.2.3’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"foobar-1.2.3"
];
}
Adding either of these configurations will permit this specific
version to be installed. A third option also exists:
NIXPKGS_ALLOW_INSECURE=1 nix-build ...
though I specifically avoided having a global file-based toggle to
disable this check. This way, users don't disable it once in order to
get a single package, and then don't realize future packages are
insecure.
This fixes the "sliding window" principle:
0. Run packages: build = native; host = foreign; target = foreign;
1. Build packages: build = native; host = native; target = foreign;
2. Vanilla packages: build = native; host = native; target = native;
3. Vanilla packages: build = native; host = native; target = native;
n+3. ...
Each stage's build dependencies are resolved against the previous stage,
and the "foreigns" are shifted accordingly. Vanilla packages alone are
built against themsevles, since there are no more "foreign"s to shift away.
Before, build packages' build dependencies were resolved against
themselves:
0. Run packages: build = native; host = foreign; target = foreign;
1. Build packages: build = native; host = native; target = foreign;
2. Build packages: build = native; host = native; target = foreign;
n+2. ...
This is wrong because that principle is violated by the target
platform staying foreign.
This will change the hashes of many build packages and run packages, but
that is OK. This is an unavoidable cost of fixing cross compiling.
The cross compilation docs have been updated to reflect this fix.
If the flag enableIntegerSimple is true GHC will be build with the GPL-free but
slower integer-simple library instead of the faster but GPLed integer-gmp
library.
The attribute `pkgs.haskell.compiler.integer-simple."${ghcVersion}"` provides a
GHC compiler build with `integer-simple`.
Similarly, the attribute `pkgs.haskell.packages.integer-simple."${ghcVersion}"`
provides a package set supporting `integer-simple`.
Closes https://github.com/NixOS/nixpkgs/pull/22121.
Closes https://github.com/NixOS/nixpkgs/issues/5493.
The Nix search path is the established mechanism for specifying the
location of Nix expressions, so let's use it instead of adding another
environment variable.
Do so in the stdenv section where the other two are discussed. This can be
done without brining up cross-compilation by talking about build-time vs
run-time.
This patch add a new argument to Nixpkgs default expression named "overlays".
By default, the value of the argument is either taken from the environment variable `NIXPKGS_OVERLAYS`,
or from the directory `~/.nixpkgs/overlays/`. If the environment variable does not name a valid directory
then this mechanism would fallback on the home directory. If the home directory does not exists it will
fallback on an empty list of overlays.
The overlays directory should contain the list of extra Nixpkgs stages which would be used to extend the
content of Nixpkgs, with additional set of packages. The overlays, i-e directory, files, symbolic links
are used in alphabetical order.
The simplest overlay which extends Nixpkgs with nothing looks like:
```nix
self: super: {
}
```
More refined overlays can use `super` as the basis for building new packages, and `self` as a way to query
the final result of the fix-point.
An example of overlay which extends Nixpkgs with a small set of packages can be found at:
https://github.com/nbp/nixpkgs-mozilla/blob/nixpkgs-overlay/moz-overlay.nix
To use this file, checkout the repository and add a symbolic link to
the `moz-overlay.nix` file in `~/.nixpkgs/overlays` directory.
I wanted to list the different texlive collections using the nix-repl, as per the [manual](https://nixos.org/nixpkgs/manual/#idm140737316065984).
It didn't work, since the nixpkgs were not loaded. Doing `:l <nixpkgs>` first resolved the problem.
This change adds the nixpkgs loading step to the manual so that the next inexperienced person don't have to figure out why it didn't work.
I tested this on NixOS unstable (16.09pre90254.6b20d5b) with nix-repl 1.11.3.
In #19309 a separate output for tkinter was added.
Several dependencies of Python depend indirectly on Python. We have the
following two paths:
```
‘python-2.7.12’ - ‘tk-8.6.6’ - ‘libXft-2.3.2’ - ‘libXrender-0.9.10’ -
‘libX11-1.6.4’ - ‘libxcb-1.12’ - ‘libxslt-1.1.29’- ‘libxml2-2.9.4’ -
‘python-2.7.12’
‘python-2.7.12’ - ‘tk-8.6.6’ - ‘libXft-2.3.2’ - ‘fontconfig-2.12.1’ -
‘dejavu-fonts-2.37’ - ‘fontforge-20160404’ - ‘python-2.7.12’
```
Because only `tkinter` needs this, I added
```
pythonSmall = python.override {x11Support = false;};
```
to break the infinite recursion. We also still have the output
`tkinter`.
However, we might as well build without x11Support by default. Then we build with x11Support as well so we get the tkinter module and put that in a separate package.
`stripHash` documentation states that it prints out the stripped name to
the stdout, but the function stored the value in `strippedName`
instead.
Basically all usages did something like
`$(stripHash $foo | echo $strippedName)` which is just braindamaged.
Fixed the implementation and all invocations.
This is similar to `overrideDerivation`, but overrides the arguments to
`mkDerivation` instead of the underlying `derivation` call.
Also update `makeOverridable` so that uses of `overrideAttrs` can be
followed by `override` and `overrideDerivation`, i.e. they can be
mix-and-matched.
They now go to devman, devdoc, or $outputMan, in that order. This is
to prevent cases such as the man-pages package quietly losing its
section 3 pages.
This one was already merged into release-16.09, so let's not have the
stable branch is ahead of master and confuse things. In addition to
that, currently we have an odd situation that master has less things
actually finished building than in staging.
Conflicts:
pkgs/data/documentation/man-pages/default.nix
This was one of the ways to build packages, we are trying
hard to minimize different ways so it's easier for newcomers
to learn only one way.
This also:
- removes texLive (old), fixes#14807
- removed upstream-updater, if that code is still used it should be in
separate repo
- changes a few packages like gitit/mit-scheme to use new texlive
