This option is only available as a command-line flag and not from the
config file, that is `services.picom.settings`. Therefore it is more
important that it gets its own option.
One reason one might need this set is that blur methods other than
kernel do not work with the old backends, see yshui/picom#464.
For reference, the home-manager picom module exposes this option too.
The commit enforces buildPackages in the builder but neglects
the fact that the builder is intended to run on the target system.
Because of that, the builder will fail when remotely building a
configuration eg. with nixops or nix-copy-closure.
This reverts commit a6ac6d00f9.
Following changes in https://github.com/NixOS/nixpkgs/pull/91092 the `path` attribute is now a list
instead of being a string. This resulted resulted in the following evaluation error:
"cannot coerce a list to a string, at [...]/nixos/modules/services/networking/openvpn.nix:16:18"
so we now need to convert it to the right type ourselves.
Closes https://github.com/NixOS/nixpkgs/issues/97360.
Add the option `environmentFile` to allow passing secrets to the service
without adding them to the Nix store, while keeping the current
configuration via the existing environment file intact.
Right now the UX for installing NixOS on a headless system is very bad.
To enable sshd without physical steps users have to have either physical
access or need to be very knowledge-able to figure out how to modify the
installation image by hand to put an `sshd.service` symlink in the
right directory in /nix/store. This is in particular a problem on ARM
SBCs (single board computer) but also other hardware where network is
the only meaningful way to access the hardware.
This commit enables sshd by default. This does not give anyone access to
the NixOS installer since by default. There is no user with a non-empty
password or key. It makes it easy however to add ssh keys to the
installation image (usb stick, sd-card on arm boards) by simply mounting
it and adding a keys to `/root/.ssh/authorized_keys`.
Importantly this should not require nix/nixos on the machine that
prepare the installation device and even feasiable on non-linux systems
by using ext4 third party drivers.
Potential new threats: Since this enables sshd by default a
potential bug in openssh could lead to remote code execution. Openssh
has a very good track-record over the last 20 years, which makes it
far more likely that Linux itself would have a remote code execution
vulnerability. It is trusted by millions of servers on many operating
systems to be exposed to the internet by default.
Co-authored-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
readd perl (used in shell scripts), rsync (needed for NixOps) and strace (common debugging tool)
they where previously removed in https://github.com/NixOS/nixpkgs/pull/91213
Co-authored-by: Timo Kaufmann <timokau@zoho.com>
Co-authored-by: 8573 <8573@users.noreply.github.com>
systemd-confinement's automatic package extraction does not work correctly
if ExecStarts ExecReload etc are lists.
Add an extra flatten to make things smooth.
Fixes#96840.
xss-lock needs XDG_SESSION_ID to respond to loginctl lock-session(s)
(and possibly other session operations such as idle hint management).
This change adds XDG_SESSION_ID to the list of imported environment
variables when starting systemctl.
Inspired by home-manager, add importVariables configuration.
Set session to XDG_SESSION_ID when running xss-lock as a service.
Co-authored-by: misuzu <bakalolka@gmail.com>
Attempting to reuse keys on a basis different to the cert (AKA,
storing the key in a directory with a hashed name different to
the cert it is associated with) was ineffective since when
"lego run" is used it will ALWAYS generate a new key. This causes
issues when you revert changes since your "reused" key will not
be the one associated with the old cert. As such, I tore out the
whole keyDir implementation.
As for the race condition, checking the mtime of the cert file
was not sufficient to detect changes. In testing, selfsigned
and full certs could be generated/installed within 1 second of
each other. cmp is now used instead.
Also, I removed the nginx/httpd reload waiters in favour of
simple retry logic for the curl-based tests
The cyclic dependency of systemd → cryptsetup → lvm2 → udev=systemd
needs to be broken somewhere. The previous strategy of building
cryptsetup with an lvm2 built without udev (#66856) caused the
installer.luksroot test to fail. Instead, build lvm2 with a udev built
without cryptsetup.
Fixes#96479.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Testing of certs failed randomly when the web server was still
returning old certs even after the reload was "complete". This was
because the reload commands send process signals and do not wait
for the worker processes to restart. This commit adds log watchers
which wait for the worker processes to be restarted.
- Use an acme user and group, allow group override only
- Use hashes to determine when certs actually need to regenerate
- Avoid running lego more than necessary
- Harden permissions
- Support "systemctl clean" for cert regeneration
- Support reuse of keys between some configuration changes
- Permissions fix services solves for previously root owned certs
- Add a note about multiple account creation and emails
- Migrate extraDomains to a list
- Deprecate user option
- Use minica for self-signed certs
- Rewrite all tests
I thought of a few more cases where things may go wrong,
and added tests to cover them. In particular, the web server
reload services were depending on the target - which stays alive,
meaning that the renewal timer wouldn't be triggering a reload
and old certs would stay on the web servers.
I encountered some problems ensuring that the reload took place
without accidently triggering it as part of the test. The sync
commands I added ended up being essential and I'm not sure why,
it seems like either node.succeed ends too early or there's an
oddity of the vm's filesystem I'm not aware of.
- Fix duplicate systemd rules on reload services
Since useACMEHost is not unique to every vhost, if one cert
was reused many times it would create duplicate entries in
${server}-config-reload.service for wants, before and
ConditionPathExists
This allows the user to configure systemd tmpfiles.d via
`environment.etc."tmpfiles.d/X.conf".text = "..."`, which after #93073
causes permission denied (with new X.conf):
```
ln: failed to create symbolic link '/nix/store/...-etc/etc/tmpfiles.d/X.conf': Permission denied
builder for '/nix/store/...-etc.drv' failed with exit code 1
```
or collision between environment.etc and systemd-default-tmpfiles
packages (with existing X.conf, such as tmp.conf):
```
duplicate entry tmpfiles.d/tmp.conf -> /nix/store/...-etc-tmp.conf
mismatched duplicate entry /nix/store/...-systemd-246/example/tmpfiles.d/tmp.conf <-> /nix/store/...-etc-tmp.conf
builder for '/nix/store/...-etc.drv' failed with exit code 1
```
Fixes#96755
GPaste ships keybindings for gnome-control-center. Those depend on GSettings schemas
but there is currently no mechanism for loading schemas other than using global ones
from $XDG_DATA_DIRS. Eventually, I want to add such mechanism but until then,
let's return the impure sessionPath option that was removed in
f63d94eba3
The Deepin Desktop Environment (DDE) is not yet fully packaged in
nixpkgs and it has shown a very difficult task to complete, as
discussed in https://github.com/NixOS/nixpkgs/issues/94870. The
conclusion is that it is better to completely remove it.
The incompatibility does not seem to exist any more: programs linked against fc 2.12
on fc 2.14 system seem to at least display text, even while printing tons of errors
(as long as you generate fc cache manually), and same thing the other way around.
Hopefully it will not be an issue in the future.
$EDITOR is allowed to contain flags, so it is important to allow the
shell to split this normally. For example, Sublime Text needs to be
passed --wait, since otherwise it will daemonise.
$NIXOS_CONFIG can be set to a directory, in which case the file used
is $NIXOS_CONFIG/default.nix. This updates 'nixos-rebuild edit' to
handle that case correctly.
This allows to perform `dd if= of=$img` after the image is built
which is handy to add e.g. uBoot SPL to the built image.
Instructions for some ARM boards sometimes contain this step
that needs to be performed manually, with this patch it can be
part of the nix file used to built the image.
declare -a is not sufficient to make the array variable actually
exist, which resulted in the script failing when the target object did
not have any DT_NEEDED entries. This in turn resulted in some
initramfs libraries not having their rpaths patched to point to
extra-utils, which in turn broke the extra-utils tests.
rfkill was subsumed by util-linux in 2017 [1], and the upstream has not
been updated in over 5 years [2]. This package shadows the rfkill from
util-linux, so it can be completely removed with no breaking changes,
because util-linux is in the base package set in nixos/system-path.
[1] d17fb726b5
[2] https://git.sipsolutions.net/rfkill.git/log/
