Many bus clients get hopelessly confused when dbus-daemon is
restarted. So let's not do that.
Of course, this is not ideal either, because we end up stuck with a
possibly outdated dbus-daemon. But that issue will become irrelevant
in the glorious kdbus-based future.
Hopefully this also gets rid of systemd getting stuck after
dbus-daemon is restarted:
Apr 01 15:37:50 mandark systemd[1]: Failed to register match for Disconnected message: Connection timed out
Apr 01 15:37:50 mandark systemd[1]: Looping too fast. Throttling execution a little.
Apr 01 15:37:51 mandark systemd[1]: Looping too fast. Throttling execution a little.
...
The nixbld group doesn't need read permission, it only needs write and
execute permission.
(cherry picked from commit 066758758e7c0768ff8da51d208cdae0f33b368c)
Since we restart all active target units (of which there are many),
it's hard to see the units that actually matter. So don't print that
we're starting target units that are already active.
‘nixos-rebuild dry-activate’ builds the new configuration and then
prints what systemd services would be stopped, restarted etc. if the
configuration were actually activated. This could be extended later to
show other activation actions (like uids being deleted).
To prevent confusion, ‘nixos-rebuild dry-run’ has been renamed to
‘nixos-rebuild dry-build’.
The PID 1 shell is executed as the last command in a sh invocation. Some
shells implicitly use exec for that, but the current busybox ash does not,
so the shell gets a wrong PID. Spell out the exec.
When gummiboot.timeout == null, the menu will still be skipped.
When gummiboot.timeout == 0, the menu will also be skipped.
The only way to show the menu 'indefinitely' is to show it a long time.
Now that dbus reload has been moved before restarting units,
the reload may fail if dbus has been stopped before.
The reload-or-restart will reload dbus if it's active,
otherwise start it.
During install, the bootloader script gets run inside a chroot after the
/etc/group bind-mount is unmounted. Since we're not doing any building,
this should be safe, but really nix should just not care if the group
does not exist when no build is needed.
Fixes#5494
The old boot.spl.hostid option was not working correctly due to an
upstream bug.
Instead, now we will create the /etc/hostid file so that all applications
(including the ZFS kernel modules, ZFS user-space applications and other
unrelated programs) pick-up the same system-wide host id. Note that glibc
(and by extension, the `hostid` program) also respect the host id configured in
/etc/hostid, if it exists.
The hostid option is now mandatory when using ZFS because otherwise, ZFS will
require you to force-import your ZFS pools if you want to use them, which is
undesirable because it disables some of the checks that ZFS does to make sure it
is safe to import a ZFS pool.
The /etc/hostid file must also exist when booting the initrd, before the SPL
kernel module is loaded, so that ZFS picks up the hostid correctly.
The complexity in creating the /etc/hostid file is due to having to
write the host ID as a 32-bit binary value, taking into account the
endianness of the machine, while using only shell commands and/or simple
utilities (to avoid exploding the size of the initrd).
The gummiboot-builder.py script is expecting the @timeout@ metavar to be
substituted for either an empty string (in the case where a user has
left the timeout unset) or the actual value set in the system
configuration.
However, the config.boot.loader.gummiboot.timeout option defaults to
'null', and due to the way pkgs.substituteAll works, the substitution
for '@timeout@' is _never_ set to the empty string. This causes the
builder script to put a bogus line into /boot/loader/loader.conf:
timeout @timeout@
Fix this by explicitly setting 'timeout' to the empty string when it's
unset in the system configuration.
Signed-off-by: Josh Cartwright <joshc@eso.teric.us>
This reverts commit 469f22d717, reversing
changes made to 0078bc5d8f.
Conflicts:
nixos/modules/installer/tools/nixos-generate-config.pl
nixos/modules/system/boot/loader/grub/install-grub.pl
nixos/release.nix
nixos/tests/installer.nix
I tried to keep apparently-safe code in conflicts.
For example in VM tests, this causes firmware to be included in the
initrd. So until we have a better fix for adding early-stage module
options, I'll remove this.
Fixes a regression introduced by 0aa2c1d and closes#3764.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
/tmp cleaning is done by systemd rather than stage-2-init
enableEmergencyMode moved from systemd to seperate module
new option to mount tmp on tmpfs
new option to enable additional units shipped with systemd
We now track copied files in /etc/.clean. This is important, because
otherwise files that are removed from environment.etc will not
actually be removed from the file system. In particular, changing
users.extraUsers.<user>.openssh.authorizedKeys.keys to an empty list
would not cause /etc/ssh/authorized_keys.d/<user> to be removed, which
was a security issue.
It only needs to be started during boot. Starting it at other times
shouldn't hurt, except that if systemd-journald is restarting at the
same time, the latter might not have a SIGUSR1 signal handler
installed yet, so it might be killed by systemd-journal-flush. (At
least that's my theory about the dead systemd-journald instances in
the build farm...)
It's only needed during early boot (in fact, it's probably not needed
at all on NixOS). Restarting it is expensive because it does a sync()
of the root file system.
systemd escaping rules translate this into a string containing '\'
which is treated by some code paths as quoted, and by others as unquoted
causing the affected units to fail.
Restarting user@ instances is bad because it causes all user services
(such as ssh-agent.service) to be restarted. Maybe one day we can have
switch-to-configuration restart user units in a fine-grained way, but
for now we should just ignore user systemd instances.
Backport: 14.04
If /boot is a btrfs subvolume, it will be on a different device than /
but not be at the root from grub's perspective. This should be fixed in
a nicer way by #2449, but that can't go into 14.04.
This reverts commit 6eaced3582. Doesn't
work very well, e.g. if you actually have the FUSE module loaded. And
in any case it's already fixed in NixOps.
Otherwise, when switching from systemd 203 to 212, you get errors like:
Failed to stop remote-fs.target: Bad message
Failed to stop systemd-udevd-control.socket: Bad message
...
These fail to mount if you don't have the appropriate kernel support,
and this confuses NixOps' ‘check’ command. We should teach NixOps not
to complain about non-essential mount points, but in the meantime it's
better to turn them off.
This seems to have combined badly with the systemd upgrade, we'll revert
for now and revisit after the 14.04 branch.
This reverts commit ad80532881, reversing
changes made to 1c5d3c7883.
This used to work with systemd-nspawn 203, because it bind-mounted
/etc/resolv.conf (so openresolv couldn't overwrite it). Now it's just
copied, so we need some special handling.
With ‘systemd.user.units’ and ‘systemd.user.services’, you can specify
units used by per-user systemd instances. For example,
systemd.user.services.foo =
{ description = "foo";
wantedBy = [ "default.target" ];
serviceConfig.ExecStart = "${pkgs.foo}/bin/foo";
};
declares a unit ‘foo.service’ that gets started automatically when the
user systemd instance starts, and is stopped when the user systemd
instance stops.
Note that there is at most one systemd instance per user: it's created
when a user logs in and there is no systemd instance for that user
yet, and it's removed when the user fully logs out (i.e. has no
sessions anymore). So if you're simultaneously logged in via X11 and a
virtual console, you get only one copy of foo.
If you define a unit, and either systemd or a package in
systemd.packages already provides that unit, then we now generate a
file /etc/systemd/system/<unit>.d/overrides.conf. This makes it
possible to use upstream units, while allowing them to be customised
from the NixOS configuration. For instance, the module nix-daemon.nix
now uses the units provided by the Nix package. And all unit
definitions that duplicated upstream systemd units are finally gone.
This makes the baseUnit option unnecessary, so I've removed it.
This allows specifying rules for systemd-tmpfiles.
Also, enable systemd-tmpfiles-clean.timer so that stuff is cleaned up
automatically 15 minutes after boot and every day, *if* you have the
appropriate cleanup rules (which we don't have by default).
This creates static device nodes such as /dev/fuse or
/dev/snd/seq. The kernel modules for these devices will be loaded on
demand when the device node is opened.
This prevents insidious errors once systemd begins handling the unit. If
the unit is loaded at boot, any errors of this nature are logged to the
console before the journal service is running. This makes it very hard
to diagnose the issue. Therefore, this assertion helps guarantee the
mistake is not made.
Note that systemd no longer depends on dbus, so we're rid of the
cyclic dependency problem between systemd and dbus.
This commit incorporates from wkennington's systemd branch
(203dcff45002a63f6be75c65f1017021318cc839,
1f842558a95947261ece66f707bfa24faf5a9d88).
Using pkgs.lib on the spine of module evaluation is problematic
because the pkgs argument depends on the result of module
evaluation. To prevent an infinite recursion, pkgs and some of the
modules are evaluated twice, which is inefficient. Using ‘with lib’
prevents this problem.
This allows to define systemd.path(5) units, for example like this:
{
systemd = let
description = "Set Key Permissions for xyz.key";
in {
paths.set-key-perms = {
inherit description;
before = [ "network.target" ];
wantedBy = [ "multi-user.target" ];
pathConfig.PathChanged = "/run/keys/xyz.key";
};
services.set-key-perms = {
inherit description;
serviceConfig.Type = "oneshot";
script = "chown myspecialkeyuser /run/keys/xyz.key";
};
};
}
The example here is actually useful in order to set permissions for the
NixOps keys target to ensure those permisisons aren't reset whenever the
key file is reuploaded.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
