See #18319 for details. Starting network-online.target manually does not
work as it hangs indefinitely.
Additionally, don't treat avahi and dhcpcd special and sync their systemd units
with the respective upstream suggestion.
The extraOptions option has default values which seems surprising. This
moves those values to startupOptions (which is what gocd-agent uses) and
empties out the default extraOptions.
The gocd-agent startupOptions description was also changed to remove the
mention of the example (given there isn't one).
Systemd upstream provides targets for networking. This also includes a target network-online.target.
In this PR I remove / replace most occurrences since some of them were even wrong and could delay startup.
Radicale can run as a foreground service and will then emits logging and
errors on the standard output. This helps the logging end up in the
systemd journal.
Follow-up to the following commits:
abdc5961c3: Fix starting the firewall
e090701e2d: Order before sysinit
Solely use sysinit.target here instead of multi-user.target because we
want to make sure that the iptables rules are applied *before* any
socket units are started.
The reason I've dropped the wantedBy on multi-user.target is that
sysinit.target is already a part of the dependency chain of
multi-user.target.
To make sure that this holds true, I've added a small test case to
ensure that during switch of the configuration the firewall.service is
considered as well.
Tested using the firewall NixOS test.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
Probably as a result of 992c514a20, it
was not being started anymore.
My understanding of systemd.special(7) (section "Special passive
system units") is that the firewall should want network-pre.target,
rather than the other way around (not very intuitive...). This in
itself does not cause the firewall to be wanted, which is why the
wanted-by relationship with multi-user.target is necessary.
http://hydra.nixos.org/build/39965589
We were pulling in 44 MiB of fonts in the default configuration, which
is a bit excessive for headless configurations like EC2
instances. Note that dejavu_minimal ensures that remote X11-forwarded
applications still have a basic font regardless.
It appears that packageOverrides no longer overrides aliases, so
aliases like
dbus_tools = self.dbus.out;
dbus_daemon = self.dbus.daemon;
now use the old, non-overriden version of dbus. That seems like a
pretty serious regression in general, but for this particular problem,
I've fixed it by replacing dbus_daemon by dbus.daemon and dbus_tools
by dbus.
Fixes#15512 and #16032
With the multi output, postgresql cannot find at runtime what is its
basedir when looking for libdir and pkglibdir. This commit fixes that.
Add code to accountsservice that returns an error if the environment
variable NIXOS_USERS_PURE is set. This variable is set from the nixos
accountsservice module if mutableUsers = false
This was one of the ways to build packages, we are trying
hard to minimize different ways so it's easier for newcomers
to learn only one way.
This also:
- removes texLive (old), fixes#14807
- removed upstream-updater, if that code is still used it should be in
separate repo
- changes a few packages like gitit/mit-scheme to use new texlive
Previously it was only set once, now it is enforced on each start-up of
redis.service. Also set _ownership_ recursively, so that the
/var/lib/redis/dump.rdb file is guaranteed to be accessible by the
currently configured redis user.
Fixes issue #9687, where redis wouldn't start because /var/lib/redis had
wrong owner.
Before commit 54fa0cfe4e, the `redshift`
service was run with the environment variable `DISPLAY` set to `:0`.
Commit 54fa0cfe4e changed this to
instead use the value of the `services.xserver.display` configuration
option in the value of the `DISPLAY` variable. In so doing, no default
value was provided for the case where `services.xserver.display` is
`null`.
While the default value of `services.xserver.display` is `0`, use of
which by the `redshift` module would result in `DISPLAY` again being
set to `:0`, `services.xserver.display` may also be `null`, to which
value it is set by, e.g., the `lightdm` module.
In the case that `services.xserver.display` is `null`, with the change
made in commit 54fa0cfe4e, the `DISPLAY`
variable in the environment of the `redshift` service would be set to
`:` (a single colon), which, according to my personal experience,
would result in —
- the `redshift` service failing to start; and
- systemd repeatedly attempting to restart the `redshift` service,
looping indefinitely, while the hapless `redshift` spews error
messages into the journal.
It can be observed that the malformed value of `DISPLAY` is likely at
fault for this issue by executing the following commands in an
ordinary shell, with a suitable `redshift` executable, and the X11
display not already tinted:
- `redshift -O 2500` — This command should reduce the color
temperature of the display (making it more reddish).
- `DISPLAY=':' redshift -O 6500` — This command should raise the
color temperature back up, were it not for the `DISPLAY`
environment variable being set to `:` for it, which should cause
it to, instead, fail with several error messages.
This commit attempts to fix this issue by having the `DISPLAY`
environment variable for the `redshift` service default to its old
value of `:0` in the case that `services.xserver.display` is `null`.
I have tested this solution on NixOS, albeit without the benefit of a
system with multiple displays.
gdnc is a user process and can't be made into a NixOS module very
easily. It can still be put in the user's login script. According to the
GNUstep documentation it will be started as soon as it is needed.
- Agent now takes a full URL to the Go.CD server
- Instruct the agent to attempt restart every 30s upon failure
- Test's Accept header did not match the server's expectation
- Replace the tests' complex Awk matches with calls to `jq`
Update gocd-agent package version to 16.6.0-3590 including new sha. Modify heapSize
and maxMemory mkOption to accurately reflect their intended purpose of configuring
initial java heap sizes.
From @fpletz: Keep poolConfigs option for backwards-compatibility.
The original commit 6b3f5b5a42 was previously
reverted by c7860cae1a but the issues were
resolved.
The varnish tools (varnishstat, varnishlog, ...) tried to load the VSM
file from a spurious var directory in the Nix store. Fix the default so
the tools "just work" when also keeping services.varnish.stateDir at the
default.
Notes:
- The tools use $localstatedir/$HOSTNAME so I've adapted the default for
stateDir as well to contain hostName.
- Added postStop action to remove the localstatedir. There is no point
in keeping it around when varnish does not run, as it regenerates it
on startup anyway.
Fixes#7495
The name gitlab-runner clashes with a component of Gitlab CI with the
same name and only confuses people. It's now called gitlab-bundle and
a convenience-script gitlab-rake for easier invocation of rake tasks
was added. This was the primary use case of gitlab-runner.
The module will configure a Cassandra server with common options being
tweakable. Included is also a test which will spin up 3 nodes and
verify that the cluster can be formed, broken, and repaired.
In light of Emacs packaging improvements such as those mentioned
in #11503, and with the addition of a systemd service (#15807
and #16356), and considering that the wiki page is completely
out of date (#13217), it seems that some documentation is in order.
Adds a new chain in the raw table for reverse path filtering and optional
logging. A rule to allow serving DHCPv4 was also added as it is commonly
needed and poses no security risk even when no DHCPv4 server is running.
Fixes#10101.
Instead of one package `extra-cmake-modules`, there is now `ecm` and
`ecmNoHooks`. The latter is used when one does not want to incur a Qt 5
dependency; it is also available as a top-level package
`extra-cmake-modules`.
Revert httpConfig its old behaviour and make it mutually exclusive to
the new structured configuration. Adds appendHttpConfig to have the
ability to write custom config in the generated http block.
This reverts commit 6b3f5b5a42 because it
introduced a non-backwards compatible change in the phpfpm interface,
without really needing to. The new interface, if needed, can be re-added
alongside the old interface.
Commit 98e419c0e2 ("tt-rss service: init at 16.3")
depends on the new interface, so this commit updates the tt-rss service
to work with the old services.phpfpm.poolConfigs interface.
Update gocd-server package version to 16.6.0-3590 including new sha. Modify heapSize
and maxMemory mkOption to accurately reflect their intended purpose of configuring
initial java heap sizes.
Note: the option to configure the watchdog timeout seems to be gone
in the 2.3 series of Logstash. It complains about an unknown option
and it is not in the source anymore. I am thus removing this
configuration option to adjust the service to these changes, too.
GoCD is an open source continuous delivery server specializing in advanced workflow
modeling and visualization. Update maintainers list to include swarren83. Update
module list to include gocd agent and server module. Update packages list to include
gocd agent and server package. Update version, revision and checksum for GoCD
release 16.5.0.
KDM and LightDM (at least with autologin) call the xsession-script with
two arguments: the first is the path of the xsession script itself,
while the second one are the actual arguments. The line to re-exec the
script under systemd-cat only forwarded a single argument, therefore
breaking LightDM and KDM login. This commit fixes the issue by always
forwarding all the arguments.
We need to pass certain environment variables through the wrapper, but I
don't know how to do that yet. The setuid-root feature serves only to
hide kdeinit from the OOM killer, so this is not critical.
As pointed out by @danbst, the tomcat NixOS module expects packages
listed in services.tomcat.webapps to either be direct .war file paths or
have .war files inside a "webapps" directory.
Commit 4075c10a59
("jenkins: move .war file from $out to $out/lib/jenkins.war") broke
jenkins + tomcat. Fix it by moving jenkins.war to $out/webapps/.
Fixes#14137, also known as:
$ nix-shell -p jenkins
bash: source: /nix/store/ln1yw6c2v8bb2cjqfr1z5aqcssw054wa-jenkins-2.3:
cannot execute binary file
[nix-shell exited with error]
The problem is that jenkins.war is not installed inside the directory
$out, but rather _as the file_ $out. Fix it by moving the file to
$out/lib/jenkins.war.
While at it, move buildCommand so that the "meta" section is at the end
of the expression (standard style), and quote shell variables.
systemd[11376]: caddy.service: Failed at step EXEC spawning /nix/store/ghpcwj6paccc92l1gk7ykb6gf2i2w6fi-go1.6-caddy-0.8.3/bin/caddy: No such file or directory
Every period, sa1 collects and stores data.
Every 24 hours, sa2 aggregates the previous day's data in to a
report.
Timers and unit configurations were lifted from Fedora's default
units.
The shairport-sync service currently fails to start with the error
shairport avahi_entry_group_new failed
This problem seems to have been introduced by
cdd7310a50
After some trial and error I concluded that the attached commit is a minimal
fix.
- init gnome-software for gnome3 at 3.18.3
- list gnome-software as an "optional package" for gnome3
- enable packagekit service when gnome3 is enabled
- currently pulled in from Git until the next release of PackageKit
has Nix support
- also: add in a service module to start packagekit properly
- nixos service can be enabled via services.packagekit.enable
- packagekit requires nixunstable to build properly
Fixes this (line wrapped):
$ gnome-control-center
[... click on the "Color" item ...]
(gnome-control-center:3977): color-cc-panel-WARNING **: \
The name org.freedesktop.ColorManager was not provided by any .service files
With this patch applied, the above warnings are not printed and the GUI
shows some devices that can be managed (my printer and display). Without
this patch the GUI is empty (non-functional).
(cups will also complain in the journal with a similar message when
doing print jobs, without this patch.)
The docstring for the `services.dbus.packages` configuration option only
mentioned one directory, but the implementation actually looked for DBus
config files in four separate places within the target packages. This
commit updates the docstring to reflect the actual implementation
behaviour.
stripHash uses a global variable to communicate it's computation
results, but it's not necessary. You can just pipe to stdout in a
subshell. A function mostly behaves like just another command.
baseHash() also introduces a suffix-stripping capability since it's
something the users of the function tend to use.
...by adding system-config-printer to services.dbus.packages (if
services.printing.enable is true).
Without this patch, trying to add a printer will result in a little dialog
saying "Failed to add new printer" and gnome-control-center will print this to
the terminal (line wrapped):
(gnome-control-center:3546): printers-cc-panel-WARNING **: \
GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: \
The name org.fedoraproject.Config.Printing was not provided by any .service files
system-config-printer supplies the "org.fedoraproject.Config.Printing" dbus
service, thus fixing the problem.
wpa_supplicant fails to start if the wireless interfaces aren't ready yet,
so we need to add a system ordering directive here to start wpa_supplicant
after the interfaces are ready. Note that Requires= is not enough since
it does not imply ordering.
