Launching a container with a private network requires creating a
dedicated networking interface for it; name of that interface is derived
from the container name itself - e.g. a container named `foo` gets
attached to an interface named `ve-foo`.
An interface name can span up to IFNAMSIZ characters, which means that a
container name must contain at most IFNAMSIZ - 3 - 1 = 11 characters;
it's a limit that we validate using a build-time assertion.
This limit has been upgraded with Linux 5.8, as it allows for an
interface to contain a so-called altname, which can be much longer,
while remaining treated as a first-class citizen.
Since altnames have been supported natively by systemd for a while now,
due diligence on our side ends with dropping the name-assertion on newer
kernels.
This commit closes#38509.
systemd/systemd#14467systemd/systemd#17220https://lwn.net/Articles/794289/
The NixOS manual documents that you can invoke every tests using
nix-build path/to/nixos/tests/test.nix
which was not the case for openldap since it is not autocallable, but
requires pkgs and system as arguments. Usually, make-test-pythons.nix
takes care of this if it is imported at the top-level, but since
openldap.nix contains multiple tests, this was not the case.
This is however easily fixed by:
* Adding default values for the pkgs and system arguments based on the
definition in make-test-python.nix
* Passing pkgs and system explicitly to make-test-python.nix to ensure
the pkgs and system values passed from all-tests.nix are used.
VM tests are expensive (and prone to random failures) so they should
only be used for things that can only be tested in a VM, not for
things that could be tested in a regular checkPhase or derivation.
The current Ceph tests use the old method for OSDs to store data on
disks, known as Filestore. This means there are no tests for the
Bluestore functionality that run on install, which means that things
like RocksDB being broken can slip through and break the Bluestore
functionality in a subtle and difficult to debug manner.
Add a test to check that Bluestore works, at least on a single node.
Exclude static 192.168.*.2 addresses from the dynamic address range to
prevent different interfaces from getting the same address.
Seems like configuring a fixed IPv4 address does not automatically
exclude it from the dynamic address range.
Should fix occasional failures of
nixos.tests.networking.scripted.macvlan and possibly other networking
tests relying on DHCP.
* Add 'librespot' (new name for 'spotify'), 'alsa', 'tcp'.
* Add a warning about the spotify -> librespot rename.
* Fix the deprecated example `mode = "listen"` for type 'pipe'.
* Update the tests to include a straightforward 'tcp' test.
Test for the option `networking.wireless.athUserRegulatoryDomain` to
make sure the underlying patch still applies for the latest kernel.
Also see NixOS/nixpkgs#108725.
Define systemd-socket activation using the upstream configuration
files as a reference. The "rsyncd" systemd unit has been renamed
to "rsync" for consistency with upstream.
- Improve the documentation (Python docstrings for functions and more
meaningful xdotool script names).
- Make more use of the existing methods (e.g. wait_until_succeeds(), and
send_key())
- Note: This increases timeouts from 60 seconds to (currently)
15 minutes but the defaults from test-driver.py should be fine.
This should make it simpler to read the code, understand the test
output, and drop the custom xdotool scripts in the future.
The Everthing module is not part of a library and should therefore
not be copied to the nix store.
This is particularly bad, if the Everything module is defined in
an agda library included directory, e.g. consider an agda-lib with
include: .
and Everything.agda in the project root (.), in which case the
Everything module would become part of the library.
If multiple such projects are in the dependency tree, the Everything
module becomes ambiguous and the build would fail.
The create_new_win() function could open multiple windows when used
incorrectly. This change makes sure that a new window will only be
created if the main window could be selected successfully.
This also ignores the out return values as they're never used.
By default only `chromium` will be tested but other "channels" can be
selected using e.g.:
nix-build nixos/tests/chromium.nix -A ungoogled
This also adds me as secondary maintainer (I'd like to get notified on
PRs/issues and can review them).
Only execute Ctrl+w to close the currently active window if the
new/secondary window (title: "New Tab") could be selected. This fixes a
test failure since the update to Chromium M88 (cc PR #110010).
Without this additional check the main window (title: "startup done")
could still be selected (and thus will be closed) and the script would
close both windows (i.e. terminate Chromium completely).
Use new command-line flags of release 0.3.0 and always answer with the
expected XML in the VM test instead of using a test-specific fixed path.
Co-authored-by: ajs124 <git@ajs124.de>
Since the introduction of option `containers.<name>.pkgs`, the
`nixpkgs.*` options (including `nixpkgs.pkgs`, `nixpkgs.config`, ...) were always
ignored in container configs, which broke existing containers.
This was due to `containers.<name>.pkgs` having two separate effects:
(1) It sets the source for the modules that are used to evaluate the container.
(2) It sets the `pkgs` arg (`_module.args.pkgs`) that is used inside the container
modules.
This happens even when the default value of `containers.<name>.pkgs` is unchanged, in which
case the container `pkgs` arg is set to the pkgs of the host system.
Previously, the `pkgs` arg was determined by the `containers.<name>.config.nixpkgs.*` options.
This commit reverts the breaking change (2) while adding a backwards-compatible way to achieve (1).
It removes option `pkgs` and adds option `nixpkgs` which implements (1).
Existing users of `pkgs` are informed by an error message to use option
`nixpkgs` or to achieve only (2) by setting option `containers.<name>.config.nixpkgs.pkgs`.
Previously the Docker daemon was started by systemd socket activation.
Thus, the Docker test waited for the sockets.target unit.
But when the docker module was changed to start the Docker daemon at
boot instead of by socket activation, the test was left untouched.
With the Docker 20.10 update this lead to a timing issue, where the
docker command is run before the Docker daemon has started and hangs.
Fixes#109416
The comment at the top of git-and-tools/default.nix said:
/* All git-relates tools live here, in a separate attribute set so that users
* can get a fast overview over what's available.
but unfortunately that hasn't actually held up in practice.
Git-related packages have continued to be added to the top level, or
into gitAndTools, or sometimes both, basically at random, so having
gitAndTools is just confusing. In fact, until I looked as part of
working on getting rid of gitAndTools, one program (ydiff) was
packaged twice independently, once in gitAndTools and once at the top
level (I fixed this in 98c3490196).
So I think it's for the best if we move away from gitAndTools, and
just put all the packages it previously contained at the top level.
I've implemented this here by just making gitAndTools an alias for the
top level -- this saves having loads of lines in aliases.nix. This
means that people can keep referring to gitAndTools in their
configuration, but it won't be allowed to be used within Nixpkgs, and
it won't be presented to new users by e.g. nix search.
The only other change here that I'm aware of is that
appendToName "minimal" is not longer called on the default git
package, because doing that would have necessitated having a private
gitBase variable like before. I think it makes more sense not to do
that anyway, and reserve the "minimal" suffix only for gitMinimal.
It's been 8.5 years since NixOS used mingetty, but the option was
never renamed (despite the file definining the module being renamed in
9f5051b76c ("Rename mingetty module to agetty")).
I've chosen to rename it to services.getty here, rather than
services.agetty, because getty is implemantation-neutral and also the
name of the unit that is generated.
This plugin is used commonly enough that we should ensure it still
builds (and dovecot works) after loading it.
This is not yet perfect as we aren't testing any of it's functionality
but at least we ensure that dovecot continues to do the regular job.
Previously, after the version bump to v247, we broke journalctl --grep
as libpcre2 was lazily loaded during runtime using dlopen(3). This
ensures that we have a test case that alerts us when it fails again.
Closes#106565
When generating multiple certificates which all
share the same server + email, lego will attempt
to create an account multiple times. By adding an
account creation target certificates which share
an account will wait for one service (chosen at
config build time) to complete first.
... build-vm-with-bootloader" for EFI systems
This reverts commit 20257280d9, reversing
changes made to 926a1b2094.
It broke nixosTests.installer.simpleUefiSystemdBoot
and right now channel is lagging behing for two weeks.
`nixos-rebuild build-vm-with-bootloader` currently fails with the
default NixOS EFI configuration:
$ cat >configuration.nix <<EOF
{
fileSystems."/".device = "/dev/sda1";
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
}
EOF
$ nixos-rebuild build-vm-with-bootloader -I nixos-config=$PWD/configuration.nix -I nixpkgs=https://github.com/NixOS/nixpkgs/archive/nixos-20.09.tar.gz
[...]
insmod: ERROR: could not insert module /nix/store/1ibmgfr13r8b6xyn4f0wj115819f359c-linux-5.4.83/lib/modules/5.4.83/kernel/fs/efivarfs/efivarfs.ko.xz: No such device
mount: /sys/firmware/efi/efivars: mount point does not exist.
[ 1.908328] reboot: Power down
builder for '/nix/store/dx2ycclyknvibrskwmii42sgyalagjxa-nixos-boot-disk.drv' failed with exit code 32
[...]
Fix it by setting virtualisation.useEFIBoot = true in qemu-vm.nix, when
efi is needed.
And remove the now unneeded configuration in
./nixos/tests/systemd-boot.nix, since it's handled globally.
Before:
* release-20.03: successful build, unsuccessful run
* release-20.09 (and master): unsuccessful build
After:
* Successful build and run.
Fixes https://github.com/NixOS/nixpkgs/issues/107255
