I assume there's not much use for it during bootstrapping.
This fixes them as well, as curl was compiled against libnghttp2 but the
lib wasn't copied to the bootstrap tools.
The most complex problems were from dealing with switches reverted in
the meantime (gcc5, gmp6, ncurses6).
It's likely that darwin is (still) broken nontrivially.
Otherwise this fails on ARM:
/nix/store/jipqp9739n7wrjz40igbk85pqk13s0ad-binutils-2.23.1/bin/ld: /nix/store/92pdpqrqkdf8wjciq1cisvsp8kdz8p2i-gmp-5.1.3/lib/libgmp.a(mp_get_fns.o): relocation R_ARM_MOVW_ABS_NC against `__gmp_allocate_func' can not be used when making a shared object; recompile with -fPIC
/nix/store/92pdpqrqkdf8wjciq1cisvsp8kdz8p2i-gmp-5.1.3/lib/libgmp.a: could not read symbols: Bad value
collect2: error: ld returned 1 exit status
make[2]: *** [libisl.la] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory `/tmp/nix-build-isl-0.11.1.drv-3/isl-0.11.1'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/nix-build-isl-0.11.1.drv-3/isl-0.11.1'
make: *** [all] Error 2
builder for ‘/nix/store/a8ghniifd8d8agqx0cqsh41daa08v11c-isl-0.11.1.drv’ failed with exit code 2
Several places in the tree associate the ARMv7 system
with the beaglebone platform. Change them to point to
armv7l-hf-multiplatform as it supports several boards (including the
beaglebone as well)
- there were many easy merge conflicts
- cc-wrapper needed nontrivial changes
Many other problems might've been created by interaction of the branches,
but stdenv and a few other packages build fine now.
Attrnames and package names should be as close as possible to avoid confusion.
I took care not to confuse the two mpc things during the mass-replace,
so hopefully I suceeded (tarball still builds).
The static curl program is gone, replaced by curl inside of the
bootstrap tools tarball. Also, we generate a .tar.xz archive rather
than .cpio.bz2, making the download smaller. The separate
{sh,cpio,mkdir,ln,bzip2} programs have been replaced by a single
busybox program.
Make thread disabling explicit. This changes the semantics of the perl
derivation, so on other platforms it may require setting
enableThreading = false
This commit doesn't change the derivation or out hash of stdenvLinux.
The stage3.extraAttrs.glibc argument was required for this whole build
procedure to correctly work and it was very-very hard to see why (the
comment said something about gcc47, but we're using gcc48 now).
This stage3.extraAttrs.glibc goes into stage3.stdenv.glibc after some
arg passing, and in pkgs/development/compiler/gcc an (stdenv ? glibc)
boolean expression decides to override /usr/include during the GCC
build.
All of our stages are built with glibc, so this refactoring moves this
repeating specification of glibc (once for gcc wrapper and once here for
extraAttrs) to stageFun, by getting rid of wrapGCC, as we were using
that in all of the stages anyways.
Incidentally it turned out, that this stdenv.glibc inconsistency caused
some random other stuff to behave differently:
- stage1.pkgs.perl has threading disabled,
- stage4.pkgs.coreutils (the production coreutils) has testing disabled.
Leave this historical accidents as they are in this commit, so the scope
of this commit can stay as a refactoring only, these issues will be
fixed in separate commits.
This commit doesn't change the derivation or the output hash of
stdenvLinux.
Use the new allowedRequisites feature in stdenvLinux.
This way we properly check that the end-result stdenv of the quite
complicated multi-stage stdenvLinux building procedure is sane, and only
depends on the stuff that we know about.
Alternative would be to just disallowRequisites bootstrapTools, which is
the most common offender, but we have had other offenders in the past.
For these checks to actually fire, you currently have to use nixUnstable,
as the necessary feature will be released in Nix 1.8.
Previously stdenv depended on two different zlibs and there was a third
one in the top-level package set for other purposes. This commit merges
all this zlibs to one.
Actually this have been committed once as 1f2b636, but then got lost
while resolving merge conflicts. Hopefully it survives this time.
The point here is that it's always possible to debug this staging
logic by using `nix-repl pkgs/stdenv/linux'. The modular-stdenv
change introduced the lib dependency, which we now default to
../../../lib.
No derivation or out hashes of stdenvLinux is changed by this commit.
Previously stdenv depended on two different zlibs and there was a third
one in the top-level package set for other purposes. This commit merges
all this zlibs to one.
Make stages explicit and generalize the pattern of having an stdenv and
a pkgs collection for all stages to a common stage generating function
called stageFun.
Rewrite all stage handling with this new function.
This commit doesn't change the outhash (or drvhash) of the stdenv.
Don't use default parameter values, to make the callsites more readable
and for easier debuggability/changability. Also reordered the
callsites' parameter ordering for consistency.
In the final stdenv don't repeat the name of the shell.
This commit doesn't change the outhash (or drvhash) of the stdenv.
All the different stages of stdenv had the fetchurl inherited anyways,
so make this generic in stdenvBootFun.
This commit doesn't change the outhash (or drvhash) of the stdenv.
Commit 986f361946 started to use
<nix/fetchurl.nix> to "download" the bootstrap binaries from the
Nixpkgs tree, using the file:/// scheme. This has really bad
consequences:
* It makes any derivation depend on the path of the Nixpkgs tree. So
evaluating a package will produce a different .drv file when run
from different locations. No wonder Hydra evaluation has been so
slow lately: for every Nixpkgs evaluation, it had to create tens of
thousands of .drv files, even if nothing had changed.
* It requires the builder to have file system access to the Nixpkgs
tree. So if your tree is in your home directory, the stdenv
bootstrap would probably fail.
So now the binaries are downloaded from tarballs.nixos.org.
Also dropped PowerPC "support".
Binutils nowadays contains ld.gold, which depends on libstdc++. So it
needs to be built with the new GCC rather than the one from
bootstrap-tools.
Issue #1469.
GCC provides a number of libraries that are used by programs built by
GCC, in particular libgcc_s.so and libstdc++.so. This caused programs
that used these libraries to have a runtime dependency on all of GCC
(~77 MiB). Now they only depend on the "lib" output of GCC (~1.6
MiB).
With this and previous multiple-output improvements, closure sizes are
reduced a lot:
hello: 41 MiB -> 22 MiB
patchelf: 118 MiB -> 23 MiB
pan: 364 MiB -> 90 MiB
This reduces the size of closures a lot by getting rid of Glibc's
header files, static libraries and utilities. For instance, the
closure of GNU Hello went from 41 MiB to 22 MiB.
TODO: We may want to merge back in parts of Glibc that we previously
split off (such as the info files).
Since nix-1.4, nix's corepkgs contain a fetchurl suitable for
downloading the bootstrap binaries. Doing this will allow us to have a
nixpkgs with no in-tree binaries without breaking the purity of the
bootstrap (though for now, they are fetched in-tree until the binaries
are added to nixos.org somewhere). As an additional small benefit, the
in-tree binaries do not have to be hashed on every instantiation as they
do now.
The fetchurl in nix-1.2 and 1.3 isn't able to make binaries executable,
so it can't be used for this case. In that case, attempting to build the
bootstrap will show a message asking the user to manually download each
file and add it to the store with nix-store --add (but the hash is
ultimately the same, of course).
Signed-off-by: Shea Levy <shea@shealevy.com>
Due to xz being override in the last stdenv and also in the previous, the
nixpkgs xz ended up being built by bootstrap-tools, and thus depending on it
through libgcc_so.so.1. That ends up making 'nix' with a runtime
dependency on bootstrap-tools.
Although patching it made some programs run (configure tests), some others
crashed with segfault. So I don't think there is any win patching it. The
proper way to solve the bootstrap in the raspberry pi is, as far as I've been
testing, use glibc 2.17 libs in bootstrap-tools with the same ld.so name as the
bootstrapped glibc.
This is a problem inherent in our way to bootstrap, that first replaces
the glibc of a given gcc+glibc (bootstrap-tools) with gcc-wrapper tricks, and
then builds a new gcc. A nicer way would be to build a gcc without glibc,
then the glibc, then the final gcc, as we do with cross-tools.
Some comments about this problem in
https://github.com/NixOS/nixpkgs/issues/234#issuecomment-11764352
This solves the problem of the change of name in ld.so between
glibc 2.13 and 2.17 (at least for armhf). Some comments about it in
https://github.com/NixOS/nixpkgs/issues/234#issuecomment-11764352
As there says, without this, gmp (after glibc built) tests crashed
- segfault.
Now that we have a way to alter /bin/sh in chroots on non-NixOS Linux
platforms, it may be useful to have access to stdenv.shell package and to
static bash contained in bootstrap tools. So make them accessible via stdenv
attribute set.
libstdc++ and libmudflapth link to the dynamic loader; if the
bootstrap uses another dynamic loader name, and the rpath of these
libs isn't changed, they will fail to load.
Conflicts:
pkgs/development/compilers/gcc/4.6/default.nix
pkgs/development/compilers/gcc/4.7/default.nix
The 4.7 had some weird parameters added in crossAttrs; I've removed
them, but I don't understand where they come from.
This allows various applications. It allows users to set global
optimisation flags, e.g.
stdenv.userHook = ''NIX_CFLAGS_COMPILE+=" -funroll-loops"'';
But the impetus is as an alternative to issue #229, allowing impure
stdenv setup for people who want to use distcc:
stdenv.userHook = "source /my/impure/setup-script.sh";
This is probably a bad idea, but at least now it's a bad idea in
people's configuration and not in Nixpkgs. :-)
