Dummy display manager that allows running X as a normal user.
The X server is started manually from a vt using `startx`.
Session startup commands must be provided by the user
in ~/.xinitrc, which is NOT automatically generated.
Add package libratbag and service module ratbagd
Libratbag contains ratbagd daemon and ratbagctl cli to configure
buttons, dpi, leds, etc. of gaming mice.
Add mvnetbiz to maintainers.
This commit adds the following
* the uucp user
* options for HylaFAX server to control startup and modems
* systemd services for HylaFAX server processes
including faxgettys for modems
* systemd services to maintain the HylaFAX spool area,
including cleanup with faxcron and faxqclean
* default configuration for all server processes
for a minimal working configuration
Some notes:
* HylaFAX configuration cannot be initialized with faxsetup
(as it would be common on other Linux distributions).
The hylafaxplus package contains a template spool area.
* Modems are controlled by faxgetty.
Send-only configuration (modems controlled by faxq)
is not supported by this configuration setup.
* To enable the service, one or more modems must be defined with
config.services.hylafax.modems .
* Sending mail *should* work:
HylaFAX will use whatever is in
config.services.mail.sendmailSetuidWrapper.program
unless overridden with the sendmailPath option.
* The admin has to create a hosts.hfaxd file somewhere
(e.g. in /etc) before enabling HylaFAX.
This file controls access to the server (see hosts.hfaxd(5) ).
Sadly, HylaFAX does not permit account-based access
control as is accepts connections via TCP only.
* Active fax polling should work; I can't test it.
* Passive fax polling is not supported by HylaFAX.
* Pager transmissions (with sendpage) are disabled by default.
I have never tested or used these.
* Incoming data/voice/"extern"al calls
won't be handled by default.
I have never tested or used these.
- based on module originally written by @srhb
- complies with available options in cfssl v1.3.2
- uid and gid 299 reserved in ids.nix
- added simple nixos test case
`ocserv` is a VPN server which follows the openconnect protocol
(https://github.com/openconnect/protocol). The packaging is slightly
inspired by the AUR version
(https://aur.archlinux.org/packages/ocserv/).
This patch initializes the package written in C, the man pages and a
module for a simple systemd unit to run the VPN server. The package
supports the following authentication methods for the server:
* `plain` (mostly username/password)
* `pam`
The third method (`radius`) is currently not supported since `nixpkgs`
misses a packaged client.
The module can be used like this:
``` nix
{
services.ocserv = {
enable = true;
config = ''
...
'';
};
}
```
The option `services.ocserv.config` is required on purpose to
ensure that nobody just enables the service and experiences unexpected
side-effects on the system. For a full reference, please refer to the
man pages, the online docs or the example value.
The docs recommend to simply use `nobody` as user, so no extra user has
been added to the internal user list. Instead a configuration like
this can be used:
```
run-as-user = nobody
run-as-group = nogroup
```
/cc @tenten8401
Fixes#42594
Having socket-activated epmd means that there always be only a single
instance managed centrally. Because Erlang also starts it
automatically if not available, and in worst case scenario 'epmd' can
be started by some Erlang application running under systemd. And then
restarting this application unit will cause complete loss of names in
'epmd' (if other Erlang system are also installed on this host).
E.g. see at which lengths RabbitMQ goes to recover from such
situations:
7741b37b1e/src/rabbit_epmd_monitor.erl (L36)
Having the only one socket-activated epmd completely solves this
problem.
