9fea6d4c85 broke rtl_433-exporter by
introducing several hardening options which do not play well with
rtl_433 requiring writing to USB. More precisely, rtl_433 requires
(a) AF_NETLINK to configure the radio; (b) access to the USB device,
but PrivateDevices=true hides them; (c) rw access to the USB device,
but DeviceAllow= block-lists everything.
This commit was tested on real hardware with a standard NixOS setup.
unifi does not shut down properly when stopped via systemd (it always exits with
SIGTERM exit status) because systemd wants stop commands to not exit before the
main command is gone and unifi does not comply. the easiest way around this is
to have systemd send an ignored signal after the stop command has exited.
unifi may still throw exceptions during shutdown, but it *does* exit cleanly as
far as systemd is concerned now.
The timex collector (enabled by default) needs the
adjtimex syscall, which was disabled by
9fea6d4c85.
So allow it unless the timex collector is disabled.
The systemd collector needs AF_UNIX to talk to
/var/run/dbus/system_bus_socket, which was broken
with 9fea6d4c85.
This commit allows AF_UNIX when needed.
In case of a power loss shortly after first boot,
the host keys gernerated by ssh-keygen could exist
in the file system but have zero size, preventing
sshd from starting up.
This commit changes the behaviour to generate host
keys if the file either does not exist or has zero
size, fixing the problem on the next boot.
Thanks to @SuperSandro2000 for figuring this out.
A few minor changes to get #119638 - nextcloud: add option to set
datadir and extensions - ready:
* `cfg.datadir` now gets `cfg.home` as default to make the type
non-nullable.
* Enhanced the `basic` test to check the behavior with a custom datadir
that's not `/var/lib/nextcloud`.
* Fix hashes for apps in option example.
* Simplify if/else for `appstoreenable` in override config.
* Simplify a few `mapAttrsToList`-expressions in
`nextcloud-setup.service`.
Note the appstoreEnable which will prevent nextcloud form updating
nix-managed apps. This is needed because nextcloud will store an other
version of the app in /var/lib/nextcloud/store-apps and it will
no longer be manageable.
The multipath-tools package had existed in Nixpkgs for some time but
without a nixos module to configure/drive it. This module provides
attributes to drive the majority of multipath configuration options
and is being successfully used in stage-1 and stage-2 boot to mount
/nix from a multipath-serviced iSCSI volume.
Credit goes to @grahamc for early contributions to the module and
authoring the NixOS module test.
Don't worry, it's is true by default. But I think this is important to
have because NixOS indeed shouldn't need Nix at run time when the
installation is not being modified, and now we can verify that.
NixOS images that cannot "self-modify" are a legitamate
use-case that this supports more minimally. One should be able to e.g. do a
sshfs mount and use `nixos-install` to modify them remotely, or just
discard them and build fresh ones if they are run VMs or something.
The next step would be to make generations optional, allowing just
baking `/etc` and friends rather than using activation scripts. But
that's more involved so I'm leaving it out.
The `$(</path/to/file)`-expansion appears verbatim in the cmdline of
`nextcloud-occ` which means that an unprivileged user could find
sensitive values (i.e. admin password & database password) by monitoring
`/proc/<pid>/cmdline`.
Now, these values don't appear in a command line anymore, but will be
passed as environment variables to `nextcloud-occ`.
* Linkify documentation about objectstore-feature rather than only
mentioning it.
* Use `<literal>` where it makes sense.
* Remove unnecessary `Whether to load` from `enableImagemagick` because
`mkEnableOption` already prepends `Whether to enable` to the given
description.
NixOS should be able to support the Nintendo Switch Pro controller for
steam and non-steam at the same time. Currently there are two mutually
exclusive ways to support the Pro Controller: Steam and `hid-nintendo`.
Unfortunately these don't work together, but there's a workaround in
newer versions of `joycond` (described [here](https://wiki.archlinux.org/title/Gamepad#Using_hid-nintendo_pro_controller_with_Steam_Games_(with_joycond))). To use this
workaround `hid-nintendo` and `joycond` need to be updated, and the
systemd and udev configuration needs to be made available in NixOS.
This is the first version of the mautrix-facebook module. Due to lack of secret support on NixOS as well as the requirement of a homeserver domain it requires some setup. For completeness here is my working config using NixOps secrets:
```nix
deployment.keys."mautrix-facebook-config.env" = {
text = ''
MAUTRIX_FACEBOOK_APPSERVICE_AS_TOKEN=${secrets.as_token}
MAUTRIX_FACEBOOK_APPSERVICE_HS_TOKEN=${secrets.hs_token}
'';
destDir = "/var/keys";
};
deployment.keys."mautrix-facebook-registration.yaml" = {
text = builtins.toJSON config.services.mautrix-facebook.registrationData;
destDir = "/var/keys";
user = "matrix-synapse";
};
users.users.matrix-synapse.extraGroups = ["keys"];
systemd.services.matrix-synapse.after = ["keys.service"];
systemd.services.matrix-synapse.wants = ["keys.service"];
services.mautrix-facebook = {
enable = true;
settings = {
homeserver.domain = "bots.kevincox.ca";
bridge = {
displayname_template = "{displayname}";
permissions = {
"@kevincox:matrix.org" = "admin";
};
};
};
environmentFile = "/var/keys/mautrix-facebook-config.env";
registrationData = {
as_token = secrets.as_token;
hs_token = secrets.hs_token;
};
};
systemd.services.mautrix-facebook = rec {
wants = ["keys.target"];
after = wants;
};
services.matrix-synapse.app_service_config_files = [
"/var/keys/mautrix-facebook-registration.yaml"
];
```
Previously, the `nix_read_pwd` function was only used for reading the
`dbpassFile`, however it has since been refactored to handle reading
other secret files too. This fixes the message of the exception that is
thrown in the case that the file is not present so that it no longer
refers specifically to the `dbpass` file.
Removes the submodule in favour of using an attrset.
Also:
- Makes better use of nix's laziness in config expansion.
- Makes use of `boolToString` where applicable.
We should discourage users from adding secrets in a way that allows for
them to end up in the globally readable `/nix/store`. Users should use
the `objectstore.s3.secretFile` option instead.
This allows to declaratively configure an S3 class object storage as the
primary storage for the nextcloud service. Previously, this could only
be achieved by manually editing the `config.php`.
I've started testing this today with my own digitalocean nextcloud
instance, which now points to my digitalocean S3-compatible "Space" and
all appears to be working smoothly.
My motivation for this change is my recent discovery of how much cheaper
some S3-compatible object storage options are compared to digitalocean's
"Volume" options.
Implementation follows the "Simple Storage Service" instructions here:
https://docs.nextcloud.com/server/latest/admin_manual/configuration_files/primary_storage.html
I have neglected to implement a submodule for the OpenStack Swift
object storage as I don't personally have a use case for it or a method
to test it, however the new `nextcloud.objectstore.s3` submodule should
act as a useful guide for anyone who does wish to implement it.
The MariaDB version 10.6 doesn't seem supported with current Nextcloud
versions and the test fails with the following error[1]:
nextcloud # [ 14.950034] nextcloud-setup-start[1001]: Error while trying to initialise the database: An exception occurred while executing a query: SQLSTATE[HY000]: General error: 4047 InnoDB refuses to write tables with ROW_FORMAT=COMPRESSED or KEY_BLOCK_SIZE.
According to a support-thread in upstream's Discourse[2] this is because
of a missing support so far.
Considering that we haven't received any bugreports so far - even though
the issue already exists on master - and the workaround[3] appears to
work fine, an evaluation warning for administrators should be
sufficient.
[1] https://hydra.nixos.org/build/155015223
[2] https://help.nextcloud.com/t/update-to-next-cloud-21-0-2-has-get-an-error/117028/15
[3] setting `innodb_read_only_compressed=0`
Move to a forefront launch of the daemon. Doing so allowed us
to move the service from forking to simple to avoid the
missing pid error log.
Also:
- Make the dbus dependency explicit.
The MemoryDenyWriteExecute systemd option is widely known to be
incompatible with nodejs, and causes service crashes as reported in #119687.
Fixes#119687.
This is to address a regression introduced in #131118.
When syncing the first dataset, syncoid expects that the target
dataset doesn't exist to have a clean slate to work with. So during
runtime we'll check if the target dataset does exist and if it doesn't
- delegate the permissions to the parent dataset instead.
But then, on unallow, we do the unallow on both the target and the
parent since the target dataset should have been created at this
point, so the unallow can't know which dataset that got permissions
just by which datasets exists.
When restoring a backup, discourse decompresses the backup archive in
the /share/discourse/tmp dir. Before this change, it is linked to /run
which is typically backed by memory, so the backup will fail to
restore if you do not have enough memory on your system to contain the
backup. This has already happened to me on two small forums.
This moves tmp to the StateDirectory /var/lib/discourse/tmp which is
typically backed by disk.
Using builtins.readFile to load upstream defaults is a clever trick, but
it's not allowed in restricted evaluation mode: which means it fails on
Hydra, for example. Besides - in Nixpkgs - depending on derivation as
inputs is considered bad practice and should be avoided.
* nixos/opensmtpd: Add missing brackets in config
Without this commit, you end up missing the sendmail suid wrapper,
because the "program" attribute would not override the right thing.
* Update nixos/modules/services/mail/opensmtpd.nix
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
The `services.mastodon` module currently hardcodes sidekiq's concurrency
to 25, but doesn't set a DB pool size, which defaults to 5 or the number
of configured web threads.
(This behaviour is very strange, and arguably a mastodon bug.)
This also makes sidekiq's concurrency configurable, because 25 is a tad
high for the hardware I'm running it on.
After recent change `services.smokeping.enable = true;` system
started failing the build as:
```
nixpkgs-master $ nix build --no-link -f nixos system --keep-going
...
Checking that Nix store paths of all wrapped programs exist... FAIL
The path /nix/store/kr2sr80g9ny74im6m6dyh9v44hnzm261-fping-5.0/bin/fping6 does not exist!
Please, check the value of `security.wrappers."fping6".source`.
```
`fping` does not provide `fping6` binary for a while. Let's just remove it.
Closes: https://github.com/NixOS/nixpkgs/issues/138581
- Detailed initial config generation process.
- Detailed Nginx Configuration.
- Detailed private/public conf split.
docs: Improved documentation of Pleroma service
Secrets are only in the private file, and in a draft format for avoiding GitHub
complaints.
Fixed Nginx configuration.
docs: Improved the Nginx reverse proxy settings of Pleroma service
Just setting the XKB_CONFIG_ROOT should be enough, so we don't need to
rebuild the xserver, xkbcomp and other packages anymore.
However, the variable has to be passed explicitely to scripts running at
build time: in particular to xkbvalidate and xkb-console-keymap.
