m68k was recently added for Linux and none, but NetBSD also supports
m68k. Nothing will build yet, but I want to make sure we at least
encode the existence of NetBSD support for every applicable
architecture we support for other operating systems.
These are all the architectures supported by Nixpkgs on other
platforms, that are also supported by NetBSD. (So I haven't added
any architectures that are new to Nixpkgs here, even though NetBSD
supports some that we don't have.)
The previous mess was partially grouped by OS, and partially grouped
by architecture, which made it very difficult to know where to add new
entries.
I've chosen to group by OS entirely, because OSes are likely to
maintain exhaustive lists of supported architectures, but it's far
less likely we'd be able to find exhaustive lists of supported OSes
for every architecture.
PPC64 supports two ABIs: ELF v1 and v2.
ELFv1 is historically what GCC and most packages expect, but this is
changing because musl outright does not work with ELFv1. So any distro
which uses musl must use ELFv2. Many other platforms are moving to ELFv2
too, such as FreeBSD (as of v13) and Gentoo (as of late 2020).
Since we use musl extensively, let's default to ELFv2.
Nix gives us the power to specify this declaratively for the entire
system, so ELFv1 is not dropped entirely. It can be specified explicitly
in the target config, e.g. "powerpc64-unknown-linux-elfv1". Otherwise the
default is "powerpc64-unknown-linux-elfv2". For musl,
"powerpc64-unknown-linux-musl" must use elfv2 internally to function.
This reverts commit ce2f74df2c.
Doubles are treated as -darwin here, to provide some consistency.
There is some ambiguity between “x86_64-darwin” and “i686-darwin”
which could refer to binaries linked between iOS simulator or real
macOS binaries. useiOSPrebuilt can be used to determine which to use,
however.
Adds pkgsCross.wasm32 and pkgsCross.wasm64. Use it to build Nixpkgs
with a WebAssembly toolchain.
stdenv/cross: use static overlay on isWasm
isWasm doesn’t make sense dynamically linked.
This has been not touched in 6 years. Let's remove it to cause less
problems when adding new cross-compiling infrastructure.
This also simplify gcc significantly.
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
First, we need check against the host platform, not the build platform.
That's simple enough.
Second, we move away from exahustive finite case analysis (i.e.
exhaustively listing all platforms the package builds on). That only
work in a closed-world setting, where we know all platforms we might
build one. But with cross compilation, we may be building for arbitrary
platforms, So we need fancier filters. This is the closed world to open
world change.
The solution is instead of having a list of systems (strings in the form
"foo-bar"), we have a list of of systems or "patterns", i.e. attributes
that partially match the output of the parsers in `lib.systems.parse`.
The "check meta" logic treats the systems strings as an exact whitelist
just as before, but treats the patterns as a fuzzy whitelist,
intersecting the actual `hostPlatform` with the pattern and then
checking for equality. (This is done using `matchAttrs`).
The default convenience lists for `meta.platforms` are now changed to be
lists of patterns (usually a single pattern) in
`lib/systems/for-meta.nix` for maximum flexibility under this new
system.
Fixes#30902
Negative reasoning like `allBut` is a bad idea with an open world of
platforms. Concretely, if we add a new, quite different sort of
platform, existing packages with `allBut` will claim they work on it
even though they probably won't.
Existing "mips64el" should be "mipsel".
This is just the barest minimum so that nixpkgs can recognize them as
systems - although required for building individual derivations onto
MIPS boards, it is not sufficient if you want to actually build nixos on
those targets
This does break the API of being able to import any lib file and get
its libs, however I'm not sure people did this.
I made this while exploring being able to swap out docFn with a stub
in #2305, to avoid functor performance problems. I don't know if that
is going to move forward (or if it is a problem or not,) but after
doing all this work figured I'd put it up anyway :)
Two notable advantages to this approach:
1. when a lib inherits another lib's functions, it doesn't
automatically get put in to the scope of lib
2. when a lib implements a new obscure functions, it doesn't
automatically get put in to the scope of lib
Using the test script (later in this commit) I got the following diff
on the API:
+ diff master fixed-lib
11764a11765,11766
> .types.defaultFunctor
> .types.defaultTypeMerge
11774a11777,11778
> .types.isOptionType
> .types.isType
11781a11786
> .types.mkOptionType
11788a11794
> .types.setType
11795a11802
> .types.types
This means that this commit _adds_ to the API, however I can't find a
way to fix these last remaining discrepancies. At least none are
_removed_.
Test script (run with nix-repl in the PATH):
#!/bin/sh
set -eux
repl() {
suff=${1:-}
echo "(import ./lib)$suff" \
| nix-repl 2>&1
}
attrs_to_check() {
repl "${1:-}" \
| tr ';' $'\n' \
| grep "\.\.\." \
| cut -d' ' -f2 \
| sed -e "s/^/${1:-}./" \
| sort
}
summ() {
repl "${1:-}" \
| tr ' ' $'\n' \
| sort \
| uniq
}
deep_summ() {
suff="${1:-}"
depth="${2:-4}"
depth=$((depth - 1))
summ "$suff"
for attr in $(attrs_to_check "$suff" | grep -v "types.types"); do
if [ $depth -eq 0 ]; then
summ "$attr" | sed -e "s/^/$attr./"
else
deep_summ "$attr" "$depth" | sed -e "s/^/$attr./"
fi
done
}
(
cd nixpkgs
#git add .
#git commit -m "Auto-commit, sorry" || true
git checkout fixed-lib
deep_summ > ../fixed-lib
git checkout master
deep_summ > ../master
)
if diff master fixed-lib; then
echo "SHALLOW MATCH!"
fi
(
cd nixpkgs
git checkout fixed-lib
repl .types
)
This reverts commit 2282a5774c, reversing
changes made to 14adea9156.
The lib tests are bloking nixpkgs-unstable, and I don't like debugging
it soon enough.
