Hydra passes the full revision in to the input, which we pass through.
If we don't get this ,we try to get it from other sources, or default to
master which should have the definition in a close-ish location.
All published docs should have theURL resolve properly, only local
hackers will have the link break.
* Version 4.01.17 works fine for me on NixOS, driving both a Samsung ML-2165w
and a Samsung ML-2510 printer successfully.
* Version 4.00.39 is broken. The build shows errors, but doesn't abort. The
generated binaries don't work, because they are lacking rpaths to their
library dependencies.
* Renamed old default.nix file to 1.00.37.nix. That version wasn't the default
and it feels like a bad idea to mix versioned and unversioned file names in
the same directory.
We also start carrying the previous versions as crystal is under rapid
development.
Instead of pulling the binary builder each time, create a derivation that we can
use to build the various versions.
It was required for gitlab < 9 which is not supported anymore since some time.
While removinf the V1 the patch was refreshed to cleanly work with version 11.x
There were two things to fix:
- Boost started shipping libboost_python.so as libboost_python{Major}{Minor}
- Make sure that mapnik and boost link to the correct version of python.
This adds roccat-tools and one required dependency (libgaminggear),
which I had laying around since June 2016 but never submitted upstream
until now.
The tools are required if you want to configure one of the hardware
devices from the manufactorer ROCCAT.
Builds for both have been tested against i686-linux, x86_64-linux and
aarch64-linux.
I had this package along with libgaminggear laying around since June
2016[1] and basically just did the setup for the ROCCAT device once and
never touched it again since then. However, I got requests from other
users who might need this, so I decided to finally upstream it along
with using the latest versions.
There were a few hardcoded paths to fix, like eg. /etc/xdg and another
one that used /var/lib/roccat, the latter I moved into $XDG_DATA_HOME
instead.
The reason why I put it in os-specific/linux is that the official site
explicitly states that it's for Linux only and I specified the platforms
attribute accordingly.
[1]: https://gist.github.com/aszlig/3a01c0c23254a68c2be4c6df59e26862
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @devhell
This is a requirement for roccat-tools, which is going to be introduced
soon.
The reason why I'm using propagatedBuildInputs here is because the
pkg-config file lists *all* of the dependencies in Requires and
Requires.private, so those libraries are needed whenever any software
uses that library.
Signed-off-by: aszlig <aszlig@nix.build>
Before, providers were only built indirectly. Since proviers don't
depend on terraform to build they can be moved into their own collection
of packages. This also has the advantage that they can be reached
directly using an attribute path (Eg: terraform-providers.nixos).
Co-authored-by: Wael Nasreddine <wael.nasreddine@gmail.com>
The per-version `default.nix`es just fill in default arguments. It is
much more useful to have the `.override` from the inner `callPackage`,
for finer control. Converting the outer `callPackage` to a plain import
makes the inner one the only one, revealing its `.override`.
Using a simple algorithm, convert the references to a path in to a
sorted list of dependent paths based on how often they're referenced
and how deep in the tree they live. Equally-"popular" paths are then
sorted by name.
The existing writeReferencesToFile prints the paths in a simple
ascii-based sorting of the paths.
Sorting the paths by graph improves the chances that the difference
between two builds appear near the end of the list, instead of near
the beginning. This makes a difference for Nix builds which export a
closure for another program to consume, if that program implements its
own level of binary diffing.
For an example, Docker Images. If each store path is a separate layer
then Docker Images can be very efficiently transfered between systems,
and we get very good cache reuse between images built with the same
version of Nixpkgs. However, since Docker only reliably supports a
small number of layers (42) it is important to pick the individual
layers carefully. By storing very popular store paths in the first 40
layers, we improve the chances that the next Docker image will share
many of those layers.*
Given the dependency tree:
A - B - C - D -\
\ \ \ \
\ \ \ \
\ \ - E ---- F
\- G
Nodes which have multiple references are duplicated:
A - B - C - D - F
\ \ \
\ \ \- E - F
\ \
\ \- E - F
\
\- G
Each leaf node is now replaced by a counter defaulted to 1:
A - B - C - D - (F:1)
\ \ \
\ \ \- E - (F:1)
\ \
\ \- E - (F:1)
\
\- (G:1)
Then each leaf counter is merged with its parent node, replacing the
parent node with a counter of 1, and each existing counter being
incremented by 1. That is to say `- D - (F:1)` becomes `- (D:1, F:2)`:
A - B - C - (D:1, F:2)
\ \ \
\ \ \- (E:1, F:2)
\ \
\ \- (E:1, F:2)
\
\- (G:1)
Then each leaf counter is merged with its parent node again, merging
any counters, then incrementing each:
A - B - (C:1, D:2, E:2, F:5)
\ \
\ \- (E:1, F:2)
\
\- (G:1)
And again:
A - (B:1, C:2, D:3, E:4, F:8)
\
\- (G:1)
And again:
(A:1, B:2, C:3, D:4, E:5, F:9, G:2)
and then paths have the following "popularity":
A 1
B 2
C 3
D 4
E 5
F 9
G 2
and the popularity contest would result in the paths being printed as:
F
E
D
C
B
G
A
* Note: People who have used a Dockerfile before assume Docker's
Layers are inherently ordered. However, this is not true -- Docker
layers are content-addressable and are not explicitly layered until
they are composed in to an Image.
Thanks to @symphorien for this work, which apart from the update itself
includes a few more fixes and cleanups.
I've tested building and running the upgraded Paperwork and while I
haven't done extensive testing on every little feature it seems to work
so far.
The changes also include an addition to fetchFromGitLab, which allows to
specify a group.
Merges: #46487
* needs at least qtgraphicaleffects not mentioned in docs
* doesn't want to use our libqmatrixclient, so let it use bundled
* took a few runs (or perhaps just patience with one) to populate,
when my profile icon appeared it seemed ready-- then click it
to see list of rooms and such.
- New dependency on 'getconf' binary for
3aa619e9ef/src/vm_memory_monitor.erl (L448)
- New dependency on 'socat' for systemd notifications
4a3ee3a336/src/rabbit.erl (L361)
- elixir_1_6 for a new 'rabbitmqctl' tool
- Replace patching with providing custom PATH, as we already have some
other things here
- Renamed package in all-packages.nix from a legacy spelling
This includes the initialy commit was done by @Mic92 plus a few fixes
from my side. So essentially this avoids patching statically linked
executables and also speeds up searching for ELF files altogether.
I've tested this by comparing the outputs of all the derivations which
make use of this hook using the following Nix expression:
let
getPackagesForRev = rev: with import (builtins.fetchGit {
url = ./.;
inherit rev;
}) { config.allowUnfree = true; }; [
cups-kyodialog3 elasticsearch franz gurobi javacard-devkit
masterpdfeditor maxx oracle-instantclient powershell reaper
teamviewer unixODBCDrivers.msodbcsql17 virtlyst wavebox zoom-us
];
pkgs = import <nixpkgs> {};
baseRev = "ef764eb0d8314b81a012dae04642b4766199956d";
in pkgs.runCommand "diff-contents" {
chset = pkgs.lib.zipListsWith (old: new: pkgs.runCommand "diff" {
inherit old new;
nativeBuildInputs = [ pkgs.nukeReferences ];
} ''
mkdir -p "''${NIX_STORE#/}"
cp --no-preserve=all -r "$old" "''${NIX_STORE#/}"
cp --no-preserve=all -r "$new" "''${NIX_STORE#/}"
find "''${old#/}" "''${new#/}" \
\( -type f -exec nuke-refs {} + \) -o \( -type l -delete \)
mkdir "$out"
echo "$old" > "$out/old-path"
echo "$new" > "$out/new-path"
diff -Nur "''${old#/}" "''${new#/}" > "$out/diff" || :
'') (getPackagesForRev baseRev) (getPackagesForRev "");
} ''
err=0
for c in $chset; do
if [ -s "$c/diff" ]; then
echo "$(< "$c/old-path") -> $(< "$c/new-path")" \
"differs, report: $c/diff" >&2
err=1
fi
done
[ $err -eq 0 ] && touch "$out"
''
With these changes there is only one derivation which has altered
contents, which is "franz". However the reason why it has differing
contents is not directly because of the autoPatchelfHook changes, but
because the "env-vars" file from the builder is in
"$out/opt/franz/env-vars" (Cc: @gnidorah) and we now have different
contents for NIX_CFLAGS_COMPILE and other environment variables.
I also tested this against a random static binary and the hook no longer
tries to patch it.
Merges: #47222
