Commit graph

1303 commits

Author SHA1 Message Date
Tuomas Tynkkynen
d1d8ed21b6 stdenv: Aarch64 bootstrap: Update bootstrap tarballs to hydra-built ones
Picked from the following cross-trunk evaluation:
http://hydra.nixos.org/eval/1326772#tabs-still-succeed based on nixpkgs
commit 264d42b9cf.

dist job: http://hydra.nixos.org/build/47094514
2017-01-29 01:34:02 +02:00
Tuomas Tynkkynen
e2a2f6d595 Merge pull request #22117 from dezgeg/aarch64-for-merge
Aarch64 (ARM64) support
2017-01-26 17:52:28 +02:00
John Ericson
c869fe022e top-level: no more need to expose splicedPackages
This was just done temporarily on the last cross-overhauling PR for
testing purposes.
2017-01-25 09:24:55 -05:00
Tuomas Tynkkynen
5c0a385e1c stdenv: Add aarch64 bootstrap files
These are temporary and will be switched to Hydra-build ones once all
the aarch4 changs are merged.
2017-01-25 00:01:53 +02:00
Tuomas Tynkkynen
de3cac0ece make-bootstrap-tools.nix test: Use busybox from store
Our bootstrap tools are actually broken right now due to busybox not
working when invoked directly from a store path. (It says e.g.
"0qqqw19y4gmknajw8vg4fvhx9gxdqlhz-busybox: applet not found").
Make this test actually fail in such case, the next commit will fix the
problem with busybox.
2017-01-25 00:01:52 +02:00
Tuomas Tynkkynen
c909f1b18e stdenv: Add updateAutoconfGnuConfigScriptsHook for aarch64
This is required for Aarch64 since a lot of source tarballs ship with
outdated configure scripts that don't recognize aarch64. Simply
replacing the config.guess and config.sub with new versions from
upstream makes them build again.

This same approach is used by at least Buildroot and Fedora. In
principle this could be enabled for all architectures but
conditionalizing this on aarch64 avoids a mass rebuild on x86.
2017-01-25 00:01:52 +02:00
Tuomas Tynkkynen
7c8a060c09 stdenv: Bringup aarch64 architecture support 2017-01-25 00:01:51 +02:00
John Ericson
bfb147b6a8 top-level: Only splice as needed for performance 2017-01-24 11:37:56 -05:00
John Ericson
a1a798f017 top-level: crossSystem is no longer exposed to packages. Use *Platform. 2017-01-24 11:37:56 -05:00
John Ericson
1c0365bd88 cross-stdenv: Inline useless bindings and reindent
Semantics should be unchanged
2017-01-24 11:37:56 -05:00
John Ericson
92edcb7ebb top-level: Lay the groundwork for {build,host,target}Platform
The long term goal is a big replace:
  { inherit system platform; } => buildPlatform
  crossSystem => hostPlatform
  stdenv.cross => targetPlatform
And additionally making sure each is defined even when not cross compiling.

This commit refactors the bootstrapping code along that vision, but leaves
the old identifiers with their null semantics in place so packages can be
modernized incrementally.
2017-01-24 11:37:56 -05:00
John Ericson
bf17d6dacf top-level: Introduce buildPackages for resolving build-time deps
[N.B., this package also applies to the commits that follow it in the same
PR.]

In most cases, buildPackages = pkgs so things work just as before. For
cross compiling, however, buildPackages is resolved as the previous
bootstrapping stage. This allows us to avoid the mkDerivation hacks cross
compiling currently uses today.

To avoid a massive refactor, callPackage will splice together both package
sets. Again to avoid churn, it uses the old `nativeDrv` vs `crossDrv` to do
so. So now, whether cross compiling or not, packages with get a `nativeDrv`
and `crossDrv`---in the non-cross-compiling case they are simply the same
derivation. This is good because it reduces the divergence between the
cross and non-cross dataflow. See `pkgs/top-level/splice.nix` for a comment
along the lines of the preceding paragraph, and the code that does this
splicing.

Also, `forceNativeDrv` is replaced with `forceNativePackages`. The latter
resolves `pkgs` unless the host platform is different from the build
platform, in which case it resolves to `buildPackages`. Note that the
target platform is not important here---it will not prevent
`forcedNativePackages` from resolving to `pkgs`.

--------

Temporarily, we make preserve some dubious decisions in the name of preserving
hashes:

Most importantly, we don't distinguish between "host" and "target" in the
autoconf sense. This leads to the proliferation of *Cross derivations
currently used. What we ought to is resolve native deps of the cross "build
packages" (build = host != target) package set against the "vanilla
packages" (build = host = target) package set. Instead, "build packages"
uses itself, with (informally) target != build in all cases.

This is wrong because it violates the "sliding window" principle of
bootstrapping stages that shifting the platform triple of one stage to the
left coincides with the next stage's platform triple. Only because we don't
explicitly distinguish between "host" and "target" does it appear that the
"sliding window" principle is preserved--indeed it is over the reductionary
"platform double" of just "build" and "host/target".

Additionally, we build libc, libgcc, etc in the same stage as the compilers
themselves, which is wrong because they are used at runtime, not build
time. Fixing this is somewhat subtle, and the solution and problem will be
better explained in the commit that does fix it.

Commits after this will solve both these issues, at the expense of breaking
cross hashes. Native hashes won't be broken, thankfully.

--------

Did the temporary ugliness pan out? Of the packages that currently build in
`release-cross.nix`, the only ones that have their hash changed are
`*.gcc.crossDrv` and `bootstrapTools.*.coreutilsMinimal`. In both cases I
think it doesn't matter.

 1. GCC when doing a `build = host = target = foreign` build (maximally
    cross), still defines environment variables like `CPATH`[1] with
    packages.  This seems assuredly wrong because whether gcc dynamically
    links those, or the programs built by gcc dynamically link those---I
    have no idea which case is reality---they should be foreign. Therefore,
    in all likelihood, I just made the gcc less broken.

 2. Coreutils (ab)used the old cross-compiling infrastructure to depend on
    a native version of itself. When coreutils was overwritten to be built
    with fewer features, the native version it used would also be
    overwritten because the binding was tight. Now it uses the much looser
    `BuildPackages.coreutils` which is just fine as a richer build dep
    doesn't cause any problems and avoids a rebuild.

So, in conclusion I'd say the conservatism payed off. Onward to actually
raking the muck in the next PR!

[1]: https://gcc.gnu.org/onlinedocs/gcc/Environment-Variables.html
2017-01-24 11:37:56 -05:00
Nicolas B. Pierron
da8cf2662a Fix missing overlays argument in stdenv/linux/default.nix 2017-01-16 01:17:33 +01:00
Nicolas B. Pierron
f5dfe78a1e Add overlays mechanism to Nixpkgs.
This patch add a new argument to Nixpkgs default expression named "overlays".

By default, the value of the argument is either taken from the environment variable `NIXPKGS_OVERLAYS`,
or from the directory `~/.nixpkgs/overlays/`.  If the environment variable does not name a valid directory
then this mechanism would fallback on the home directory.  If the home directory does not exists it will
fallback on an empty list of overlays.

The overlays directory should contain the list of extra Nixpkgs stages which would be used to extend the
content of Nixpkgs, with additional set of packages.  The overlays, i-e directory, files, symbolic links
are used in alphabetical order.

The simplest overlay which extends Nixpkgs with nothing looks like:

```nix
self: super: {
}
```

More refined overlays can use `super` as the basis for building new packages, and `self` as a way to query
the final result of the fix-point.

An example of overlay which extends Nixpkgs with a small set of packages can be found at:
  https://github.com/nbp/nixpkgs-mozilla/blob/nixpkgs-overlay/moz-overlay.nix

To use this file, checkout the repository and add a symbolic link to
the `moz-overlay.nix` file in `~/.nixpkgs/overlays` directory.
2017-01-16 01:17:33 +01:00
John Ericson
abaf790ea9 stdenv/booter.nix: Add longer note explaining indexing 2017-01-13 13:47:17 -05:00
John Ericson
ff35560460 linux stdenv: Inline stage funs to conform to new convention
Code is just moved around
2017-01-13 13:23:26 -05:00
John Ericson
b10f415c21 linux stdenv: Remove stray use of stage0 to bootstrap more elegantly 2017-01-13 13:23:26 -05:00
John Ericson
6a45e911c4 linux stdenv: Utilize overrides and prevStage better
`gcc-unwrapped` basically replaces `gccPlain`. It may seem like an ugly
polution to stick it in all-packages, but a future PR will enshrine this
`*-unwrapped` pattern. In any event, the long term goal is stdenvs might
need to tweak how compilers are booted and wrapped, but the code to build
the unwrapped compilers themselves should be generic.
2017-01-13 13:23:25 -05:00
David Grayson
0f33b9f7f1 top-level: Do stdenvOverrides in stage.nix even if crossSystem exists.
Instead, the cross stdenv will patch up the override field -- the complexity
is now confined to the one place it matters.
2017-01-13 13:23:25 -05:00
John Ericson
3e197f7d81 top-level: Normalize stdenv booting
Introduce new abstraction, `stdenv/booter.nix` for composing bootstraping
stages, and use it everywhere for consistency. See that file for more doc.

Stdenvs besides Linux and Darwin are completely refactored to utilize this.
Those two, due to their size and complexity, are minimally edited for
easier reviewing.

No hashes should be changed.
2017-01-13 13:23:23 -05:00
John Ericson
0ef8b69d12 top-level: Modernize stdenv.overrides giving it self and super
Document breaking change in 17.03 release notes
2017-01-13 10:36:11 -05:00
Tuomas Tynkkynen
bde8632106 coreutils: Build with libattr to support xattrs
Fixes #21649
2017-01-05 00:55:35 +02:00
John Ericson
19fbe80c3d top-level: avoid another assert false while we're at it 2016-12-15 17:09:46 -05:00
John Ericson
7960a1b1b8 linux stdenv: Avoid assert false
On one hand, don't want to pass garbage that affects hash, on the other
hand footguns are bad.

Now, factored out the derivation so only need to pass in what is used.
2016-12-15 17:09:29 -05:00
John Ericson
670256dc39 linux stdenv: Rename the bootstrap directory to bootstrap-files 2016-12-15 17:05:39 -05:00
John Ericson
a94af71da7 linux stdenv: Fix assert that broke tests...and hydra 2016-12-15 16:45:08 -05:00
John Ericson
5c6234a7d3 top-level: Allow manually specifying a stdenv, and fix stdenv tests
- The darwin test can now force the use of the freshly-booted darwin stdenv
 - The linux test now passes enough dummy arguments

This may make debugging harder, if so, check out #20889
2016-12-03 17:21:07 -08:00
John Ericson
4751d9e5ad top-level: turn the screw
- Non-cross stdenvs are honest and assert that `crossSystem` is null

 - `crossSystem` is a mandatory argument to top-level/stage.nix, just like
   `system` and `platform`

 - Broken default arguments on stdenvs for testing are gone.

 - All stdenvs (but little-used stdenvNix) take the same arguments for easy
   testing.
2016-12-01 11:24:33 -05:00
John Ericson
39753f5360 top-level: Close over fewer arguments for stdenv stages
This makes the flow of data easier to understand. There's little downside
because the args in question are already inspected by the stdenvs.

cross-compiling in particular is simpler because we don't need to worry
about overriding the config closed over by `allPackages`.
2016-11-30 19:11:03 -05:00
John Ericson
d240a0da1a top-level: Remove cycles: stdenv calls in top-level but not vice versa
This commit changes the dependencies of stdenv, and clean-up the stdenv
story by removing the `defaultStdenv` attribute as well as the `bootStdenv`
parameter.

Before, the final bootstrapping stage's stdenv was provided by
all-packages, which was iterating multiple times over the
top-level/default.nix expression, and non-final bootstrapping stages'
stdenvs were explicitly specified with the `bootStdenv` parameter.

Now, all stages' stdenvs are specified with the `stdenv` parameter.
For non-final bootstrapping stages, this is a small change---basically just
rename the parameter.
For the final stage, top-level/default.nix takes the chosen stdenv and
makes the final stage with it.

`allPackages` is used to make all bootstrapping stages, final and
non-final alike. It's basically the expression of `stage.nix` (along with a
few partially-applied default arguments)

Note, the make-bootstrap-tools scripts are temporarily broken
2016-11-30 19:10:59 -05:00
John Ericson
2df990967b Move up inherit binding for consistency 2016-11-30 19:03:22 -05:00
John Ericson
ddeb0d2d6b top-level: Stop exposing all stdenvs 2016-11-30 19:03:01 -05:00
Domen Kožar
45f579b9e7 allowUnfree: mention the solution that works for nix-shell as well 2016-11-16 15:14:19 +01:00
Shea Levy
7df3d7446f Add initial basic support for cross-compiling to iOS 2016-11-15 16:31:55 -05:00
John Ericson
f68e16f023 top-level: Make cross compiling slightly saner
Removes the weird stdenv cycle used to match the old infrastructure.
It turns out that matching it so precisely is not needed.
2016-11-12 20:20:44 +01:00
John Ericson
6bfe04277f top-level: Make config-overriden stdenv bootstrap more normally 2016-11-06 21:28:38 -08:00
John Ericson
e22346c35e top-level: Make stdenvCross which appears at first glance normal...
...but actually is weird just like the original
2016-11-06 21:27:38 -08:00
Domen Kožar
62edf873aa Merge pull request #18660 from aneeshusa/add-override-attrs
mkDerivation: add overrideAttrs function
2016-10-30 11:32:15 +01:00
John Ericson
d9bc6eb7f0 top-level: Make stdenv/default.nix more concise with inherit (expr) id; syntax 2016-10-27 21:47:46 -07:00
Frederik Rietdijk
7077a270bf Merge remote-tracking branch 'upstream/master' into HEAD 2016-10-26 13:06:43 +02:00
Joachim F
3d5630fac9 Merge pull request #19769 from groxxda/license
stdenv.hasLicense: ? supports nested lookup
2016-10-24 15:19:12 +02:00
Alexander Ried
a0ac2ae35e stdenv: throwEvalHelp performance (#19779) 2016-10-22 20:24:56 +02:00
Frederik Rietdijk
e56832d730 Merge remote-tracking branch 'upstream/master' into HEAD 2016-10-22 17:23:24 +02:00
Alexander Ried
43ce115ca9 stdenv.hasLicense: ? supports nested lookup
this avoids one copy of the attrset
2016-10-22 02:43:13 +02:00
Dan Peebles
e4dba74e8a darwin.stdenv: update MACOSX_DEPLOYMENT_TARGET
No point in claiming we're compatible with a version we don't try to
support, and this will probably help with a few other things elsewhere.
2016-10-16 20:47:43 -04:00
Dan Peebles
6a380c20e0 darwin.make-bootstrap-tools: Fix test target
I'll probably get rid of this eventually since the test-pkgs stuff is
more realistic, but this gives quick feedback for now.
2016-10-15 21:36:51 -04:00
Vladimír Čunát
027efec879 Merge staging without python splitting for now
The split needs more time to finish rebuilding,
but the rest seems OK and there are security fixes.
2016-10-14 09:24:21 +02:00
Vladimír Čunát
e0210d7cbf tested job: fixup evaluation after 5dadc3a
I believe hardcoding system to builtins.currentSystem isn't very good,
as e.g. Hydra surely evaluates on Linux only...
2016-10-14 09:21:38 +02:00
Dan Peebles
5dadc3a30c darwin.make-bootstrap-tools: fix for new stdenv setup 2016-10-13 22:32:19 -04:00
Vladimír Čunát
727fc259d6 Merge branch 'master' into staging 2016-10-13 09:53:16 +02:00
Vladimír Čunát
af38c05587 stdenv stripHash(): fixup after #19324 2016-10-12 23:45:30 +02:00
Dan Peebles
d8a0307a5d [darwin.stdenv] Fix to work on Sierra
This reinstates the libSystem selective symbol export machinery we used
to have, but locks it to the symbols that were present in 10.11 and skips
the actual compiled code we put into that library in favor of the system
initialization code. That should make it more stable and less likely to
do weird stuff than the last time we did this.
2016-10-12 00:08:13 -04:00
Profpatsch
bef6bef0d2
stdenv/stripHash: print to stdout, not to variable
`stripHash` documentation states that it prints out the stripped name to
the stdout, but the function stored the value in `strippedName`
instead.

Basically all usages did something like
`$(stripHash $foo | echo $strippedName)` which is just braindamaged.
Fixed the implementation and all invocations.
2016-10-11 18:34:36 +02:00
Aneesh Agrawal
39b64b52ed mkDerivation: add overrideAttrs function
This is similar to `overrideDerivation`, but overrides the arguments to
`mkDerivation` instead of the underlying `derivation` call.

Also update `makeOverridable` so that uses of `overrideAttrs` can be
followed by `override` and `overrideDerivation`, i.e. they can be
mix-and-matched.
2016-10-02 11:08:34 -04:00
Eelco Dolstra
7a4209c356 Merge remote-tracking branch 'origin/master' into staging 2016-09-20 17:46:09 +02:00
Chris Martin
10f2befa58 stdenv.mkDerivation: add comments w/ manual links (#18707) 2016-09-18 11:20:53 +02:00
Dan Peebles
ff945c5c83 stdenv-darwin: downgrade default LLVM back to 3.7
The 3.8 upgrade was premature and appears to be breaking a load of stuff
that I can't look into right now. Will take it back to 3.8 and test more
thoroughly before pushing more broadly. I should learn to change fewer
variables at a time :)
2016-09-14 01:02:01 -04:00
Dan Peebles
7b9d3f8605 stdenv-darwin: upgrade a few more things
It's a long build and generally painful to split into smaller commits,
so I apologize for lumping many changes into one commit but this is far
easier.

There are still several outdated parts of the darwin stdenv but these
changes should bring us closer to the goal.

Fixes #18461
2016-09-12 01:46:44 -04:00
Nikolay Amiantov
adaee7352b stdenv: leave SSL_CERT_FILE in shells (#15571) 2016-09-01 20:50:08 +02:00
Tuomas Tynkkynen
d3dc3d4130 Merge remote-tracking branch 'dezgeg/shuffle-outputs' into staging
https://github.com/NixOS/nixpkgs/pull/14766
2016-08-30 12:43:37 +03:00
obadz
6389f9b349 Revert "make-bootstrap-tools.darwin: upgrade to llvm 3.8"
This reverts commit bddf4e2180.

Trying to fix stdenvBootstrapTools.x86_64-darwin.stdenv

cc @copumpkin @domenkozar
2016-08-29 16:19:36 +01:00
Tuomas Tynkkynen
5326e85f3d stdenv.mkDerivation: Use chooseDevOutputs 2016-08-29 14:49:51 +03:00
Robin Gloster
e17bc25943
Merge remote-tracking branch 'upstream/master' into staging 2016-08-29 00:24:47 +00:00
Tuomas Tynkkynen
ff9491917f stdenv: Add platforms 2016-08-28 18:04:09 +03:00
obadz
3de6e5be50 Merge branch 'master' into staging
Conflicts:
      pkgs/applications/misc/navit/default.nix
      pkgs/applications/networking/mailreaders/alpine/default.nix
      pkgs/applications/networking/mailreaders/realpine/default.nix
      pkgs/development/compilers/ghc/head.nix
      pkgs/development/libraries/openssl/default.nix
      pkgs/games/liquidwar/default.nix
      pkgs/games/spring/springlobby.nix
      pkgs/os-specific/linux/kernel/perf.nix
      pkgs/servers/sip/freeswitch/default.nix
      pkgs/tools/archivers/cromfs/default.nix
      pkgs/tools/graphics/plotutils/default.nix
2016-08-27 23:54:54 +01:00
Tuomas Tynkkynen
1409bc003b make-bootstrap-tools-cross.nix: Fix gcc build-time options for armv5tel
I broke this in the cleanups I did in 171c7f0, the gcc inside the bootstrap
tarball is not getting built with the correct --with-fpu, --with-float
etc. options.
2016-08-28 00:30:48 +03:00
Eelco Dolstra
8a84fc0217 Tweak error message 2016-08-26 18:58:49 +02:00
Robin Gloster
b6c204f088
stdenv substitute: fail on non-existant input file
fixes #9744
2016-08-26 16:27:36 +00:00
Shea Levy
8b9b9fad31 Revert "Revert "Merge branch 'modprobe-fix' of git://github.com/abbradar/nixpkgs""
Revert a revert of a merge that shouldn't have been in master but was intentionally in staging.

Next time I'll do this right after the revert instead of so far down the line...

This reverts commit 9adad8612b.
2016-08-24 07:35:30 -04:00
obadz
2a552a0888 Partially revert "make-bootstrap-tools.darwin: upgrade to llvm 3.8"
This partially reverts commit bddf4e2180.

cc @copumpkin

Was breaking nix-build <nixpkgs/nixos/release-combined.nix> -A nixpkgs.tarball
See http://hydra.nixos.org/build/38886695/nixlog/2
2016-08-21 15:26:51 +01:00
Dan Peebles
bddf4e2180 make-bootstrap-tools.darwin: upgrade to llvm 3.8
This will break part of the bootstrap tools tests because the new tools
need some changes in the stdenv, but if I change them all at once, the
stdenv breaks with the old bootstrap tools. So I'm doing this first, then
will make changes to the stdenv once this bundle is built and I can use
it.

I also added some functionality to let me test one set of bootstrap tools
on another nixpkgs tree, which makes testing a lot more pleasant.
2016-08-19 23:22:22 -04:00
Shea Levy
9adad8612b Revert "Merge branch 'modprobe-fix' of git://github.com/abbradar/nixpkgs"
Was meant to go into staging, sorry

This reverts commit 57b2d1e9b0, reversing
changes made to 760b2b9048.
2016-08-15 19:05:52 -04:00
Dan Peebles
8f4bbdce99 make-bootstrap-tools: fix on darwin
A couple of things broke after my stdenv change.
2016-08-14 16:20:33 -04:00
Tuomas Tynkkynen
61faa4415e stdenv: ARM bootstrap: Update bootstrap tarballs to hydra-built ones
Picked from the following cross-trunk evaluation:
http://hydra.nixos.org/eval/1283982#tabs-inputs based on nixpkgs
commit 33a1d8080b.

armv5tel job: http://hydra.nixos.org/build/37908177
armv6l job: http://hydra.nixos.org/build/37908176
armv7l job: http://hydra.nixos.org/build/37908175
2016-07-20 18:51:09 +03:00
Tuomas Tynkkynen
3d50989651 make-bootstrap-tools{,-cross}.nix: Create deterministic tars 2016-07-20 02:38:10 +03:00
Tuomas Tynkkynen
53c039b96a make-bootstrap-tools-cross.nix: Support 'dist' target 2016-07-20 02:38:10 +03:00
Tuomas Tynkkynen
5cbb6ac151 make-bootstrap-tools-cross.nix: More syncs from the non-cross version 2016-07-20 02:38:10 +03:00
Tuomas Tynkkynen
954e54f563 make-bootstrap-tools-cross.nix: Reference correct outputs 2016-07-20 02:38:10 +03:00
Tuomas Tynkkynen
0968641eda make-bootstrap-tools-cross.nix: Use busybox with musl
Do this because I cannot figure out how to refer to `glibc.static`
inside busybox when cross building in a manner that works.
2016-07-20 02:38:10 +03:00
Tuomas Tynkkynen
171c7f0e63 make-bootstrap-tools-cross.nix: Have more consistency with platforms.nix
E.g. we had `arch = "arm"` in the former and `arch = "armv6"` in the
latter. Try to have some more consistency.
2016-07-20 02:38:10 +03:00
Tuomas Tynkkynen
9f0dc294da make-bootstrap-tools-cross.nix: Add/fix some .so dependencies
- cloog, ppl, cloogppl aren't used by recent GCCs. Kill references to them.
- Use correct versions of isl, as the current GCC depends
  on non-default versions of them.
- Also clarify isl dynamic libraries are needed in cross
  builds, but not in native builds
- Since aeb3d8c (bzip2: fix cross build on mingw by using autoconf patch),
  it seems that the bzip2 binary depends on libbz2 when cross compiling.
  So copy libbz2 into the bootstrap tarball as well.
- Curl isn't used in the bootstrap tools since e6f61b4cf3.
2016-07-20 02:38:10 +03:00
Tuomas Tynkkynen
8d62f62a78 stdenv: Remove unpack-bootstrap-tools-arm.sh
This file was using the 'double patchelf' hack, which hasn't been needed
for a while, after the original patchelf bug was fixed:

65a4dc6aa9
2016-07-20 02:38:10 +03:00
Tuomas Tynkkynen
0cdf892769 darwin make-bootstrap-tools: Document reason for special coreutils
Discussion:
https://github.com/NixOS/nixpkgs/commit/ac4958efc33322c9
2016-07-09 17:23:43 +03:00
Tuomas Tynkkynen
644d4e9ac9 Revert "Revert "make-bootstrap-tools: try again to fix on Darwin""
This reverts commit debd401b0f.

We must not use a single-binary build for the bootstrap since the common
binary gains a dynamic linkage to gmp (due to 'factor' and 'expr'
handling arbitrary-precision arithmetic).
2016-07-09 17:19:18 +03:00
Vladimír Čunát
1e2d0205a8 make-bootstrap-tools: try again to fix on Darwin
For discussion see:
https://github.com/NixOS/nixpkgs/commit/ac4958efc33322c9
2016-07-03 16:34:47 +02:00
Vladimír Čunát
debd401b0f Revert "make-bootstrap-tools: try again to fix on Darwin"
This reverts commit ac4958efc3.
2016-07-03 16:34:46 +02:00
Vladimír Čunát
ac4958efc3 make-bootstrap-tools: try again to fix on Darwin
I've got no way to test, so just trying a likely safer way blindly.
2016-07-03 14:21:55 +02:00
Vladimír Čunát
f4792cdc0c make-bootstrap-tools*: fixup after #16406
Our coreutils now uses single-binary-build mode where, by default,
simple shebang scripts are used for all the binaries. That doesn't work
e.g. with the Linux unpacker which only handles standard binaries and
symlinks. Let's use the symlinked mode instead for boostrapping.
This does NOT change any stdenv hashes.

I only tested the case most important to me:
$ nix-build pkgs/top-level/release.nix -A stdenvBootstrapTools.x86_64-linux.test
2016-06-28 09:54:22 +02:00
Vladimír Čunát
6b27ceb006 Merge 'master' into staging and re-revert merge
... from staging to master, reverted temporarily in aa9a04883e.
2016-06-23 12:09:03 +02:00
Vladimír Čunát
aa9a04883e Revert "Merge branch 'staging'" due to glibc
The main output started to retain dependency on bootstrap-tools; see
https://github.com/NixOS/nixpkgs/pull/15867#issuecomment-227949096

This reverts commit c05d829598, reversing
changes made to f073df60d6.
2016-06-23 09:25:10 +02:00
Vladimír Čunát
c05d829598 Merge branch 'staging' 2016-06-22 10:49:56 +02:00
John Ericson
5b7bdb2861 Remove more dead code: stdenvDarwinNaked no longer exists 2016-06-20 23:53:09 -07:00
John Ericson
47d95a7571 Remove dead code in stdenvCross adaptor 2016-06-20 23:53:09 -07:00
Tuomas Tynkkynen
2d3d105b02 make-bootstrap-tools-cross.nix: Strip extra whitespace 2016-06-10 16:17:30 +03:00
Domen Kožar
7a5b85cdda pkgs.runCommand: passAsFile (buildCommand can be very long)
Close #15803. This avoids the error:

while setting up the build environment: executing
‘/nix/store/7sb42axk5lrxqz45nldrb2pchlys14s1-bash-4.3-p42/bin/bash’:
Argument list too long

Note: I wanted to make it optional based on buildCommand length,
but that seems pointless as I'm sure it's less performant.

Amended by vcunat:
https://github.com/NixOS/nixpkgs/pull/15803#issuecomment-224841225
2016-06-10 10:49:26 +02:00
Joachim Fasting
6648b04381
stdenv: fix paxmark
On Linux, paxctl's setup hook should overwrite the paxmark stub, but the
stub is defined after the setup hooks are sourced, so the stub ends up
overwriting the real function.  The result is that paxmark fails to do
anything.  The fix is to define the stub before any setup hooks are
sourced.  Thanks to @vcunat for figuring this out.

Closes #15492
2016-05-27 18:57:59 +02:00
Lluís Batlle i Rossell
f6f5c185ca Allow not rebasing in cygwin stdenv.
This changes cygwin stdenv, but I don't think it will hurt much people.

This allows mkDerivation to get "dontRebase=true" to skip the usual cygwin
rebase. This is required, if we are using this stdenv to build DLLs for win32
inside x86_64-cygwin, because /bin/rebase crashes at finding an arch mismatch.
Additionally, we don't need any rebase for libraries built by visual studio and
meant for visual studio (my use case).

I'm using nix in x86_64-cygwin to build libraries with visual studio, both for
x86_64 and x86.
2016-05-20 17:17:10 +02:00
Vladimír Čunát
81df035429 stdenv setup.sh: revert most of changes around #14907
I'm giving this up. Feel free to find some reasonable variant that works
at least on Linux and Darwin. Problems encountered:
- During bootstrap of Darwin stdenv `env -0` and some bash features
  don't work.
- Without `env -0` the contents of some multi-line phases is taken as
  variable declarations, which wouldn't typically matter, but the PR
  wanted to refuse bash-invalid names which would be occasionally
  triggered. This commit dowgrades that to a warning with explanation.
2016-05-12 04:53:37 +02:00
Vladimír Čunát
62fc8859c1 stdenv substituteAll: use yet another implementation
It turned out that process substitution fed into a while-cycle
isn't recognized during darwin bootstrap:
http://hydra.nixos.org/build/35382446/nixlog/1/raw

Also fix broken NIX_DEBUG output, noticed by abbradar.
2016-05-08 19:41:50 +02:00
Vladimír Čunát
9e0d0423fe stdenv substituteAll: use more robust code
The set/env fix in #14907 wasn't very good, so let's use a null-delimited
approach. Suggested by Aszlig.
In particular, this should fix a mass-breakage on Darwin, though I was
unable to test that.
2016-05-07 11:23:30 +02:00
Vladimír Čunát
1dc36904d8 Merge #14920: windows improvements, mainly mingw 2016-05-05 08:30:19 +02:00
Nikolay Amiantov
62616ec5e2 Merge commit 'refs/pull/14907/head' of git://github.com/NixOS/nixpkgs into staging 2016-04-25 18:02:47 +03:00
Nikolay Amiantov
d4794c3630 stdenv: clarify how outputsToInstall is chosen
See https://github.com/NixOS/nixpkgs/pull/14694/files#r60013871
2016-04-25 13:24:39 +03:00
Nikolay Amiantov
5ff40ddedf add get* helper functions and mass-replace manual outputs search with them 2016-04-25 13:24:39 +03:00
Profpatsch
a2d38bc7fc doc/stdenv.xml document substitution env variables
The filtering of environment variables that start with an uppercase
letter is documented in the manual.
2016-04-23 21:41:35 +02:00
Profpatsch
77fa336849 setup.hs: substitute uses only valid bash names
bash variable names may only contain alphanumeric ASCII-symbols and _,
and must not start with a number. Nix expression attribute names however
might contain nearly every character (in particular spaces and dashes).

Previously, a substitution that was not a valid bash name would be
expanded to an empty string. This commit introduce a check that throws
a (hopefully) helpful error when a wrong name is used in a substitution.
2016-04-23 17:54:32 +02:00
Vladimír Čunát
8b292a1b35 stdenv on mingw: fix 64-bin DLL detection in some cases
In particular, this makes 64-bit libpng create DLL now,
and thus depending packages won't fail anymore (e.g. freetype).
2016-04-23 10:52:01 +02:00
Vladimír Čunát
6e7787e666 stdenv for windows: auto-link dependency DLLs
For every *.{exe,dll} in $output/bin/ we try to find all (potential)
transitive dependencies and symlink those DLLs into $output/bin
so they are found on invocation.
(DLLs are first searched in the directory of the running exe file.)

The links are relative, so relocating whole /nix/store won't break them.
The hook is activated on cygwin and when cross-compiling to mingw.
2016-04-23 10:52:00 +02:00
Alexander Ried
c6952ece24 bootstrap-tools-linux: Use tar without acl 2016-04-18 00:02:44 +02:00
Alexander Ried
28780a4dad bootstrap-tools-linux: Qualify all multi-output packages 2016-04-18 00:01:44 +02:00
Dan Peebles
d61a0e5c6f stdenv-darwin: fix build
Fixes #14704
2016-04-16 18:21:32 -04:00
Vladimír Čunát
30f14243c3 Merge branch 'master' into closure-size
Comparison to master evaluations on Hydra:
  - 1255515 for nixos
  - 1255502 for nixpkgs
2016-04-10 11:17:52 +02:00
Vladimír Čunát
710573ce6d Merge #12653: rework default outputs 2016-04-07 16:00:09 +02:00
Vladimír Čunát
2995439003 buildEnv: respect meta.outputsToInstall
As a result `systemPackages` now also respect it.
Only nix-env remains and that has a PR filed:
    https://github.com/NixOS/nix/pull/815
2016-04-07 15:59:44 +02:00
Vladimír Čunát
3342f717da stdenv: set meta.outputsToInstall unless overridden 2016-04-07 15:59:43 +02:00
Vladimír Čunát
d1df28f8e5 Merge 'staging' into closure-size
This is mainly to get the update of bootstrap tools.
Otherwise there were mysterious segfaults:
https://github.com/NixOS/nixpkgs/pull/7701#issuecomment-203389817
2016-04-07 14:40:51 +02:00
Eelco Dolstra
c55cfe0cb3 stdenv-linux: Update bootstrap tools 2016-04-07 13:17:16 +02:00
Tuomas Tynkkynen
6b42f9f4be Merge commit 'bde820' from staging
http://hydra.nixos.org/eval/1252653 - only ~9400 packages to go at the
time of writing this.
2016-04-06 01:18:28 +03:00
Charles Strahan
bde82098b8 stdenv: don't complain about configure script not existing
Close #14335.
Since 89036ef76a, when a package doesn't include a configure script,
the build complains with:

    grep: : No such file or directory
    grep: : No such file or directory

This prevents that.
2016-04-02 20:52:19 +02:00
Eelco Dolstra
13a1c7b8c1 useOldCXXAbi: Change into a setup hook
Stdenv adapters considered weird.
2016-04-01 13:36:59 +02:00
Vladimír Čunát
ab15a62c68 Merge branch 'master' into closure-size
Beware that stdenv doesn't build. It seems something more will be needed
than just resolution of merge conflicts.
2016-04-01 10:06:01 +02:00
Nikolay Amiantov
9134f9358a stdenvAdapters.useOldCXXAbi: add new adapter 2016-03-31 19:52:33 +03:00
Domen Kožar
b07e7bfc7b Merge remote-tracking branch 'origin/staging' 2016-03-27 13:19:04 +01:00
Nikolay Amiantov
0c6db0ca48 cc-wrapper: add option to skip flags for native optimizations 2016-03-24 20:16:17 +03:00
Eelco Dolstra
7fc24dfd21 stdenv-darwin: Fix dependency on bootstrapTools
Commit 2040a9ac57 changed the order of
$PATH elements, causing initialpath to appear after buildInputs. Thus
gnugrep ended up depending on bin/sh from bootstrapTools, rather than
from pkgs.bash. The fix is to provide pkgs.bash via buildInputs rather
than initialPath.

http://hydra.nixos.org/build/33276697
2016-03-23 18:15:16 +01:00
Tuomas Tynkkynen
cdef1cdd38 ARM stdenv: Update bootstrap tools
For some reason, the current bootstrap tools fail to build gettext:

init2.c:37: MPFR assertion failed: (64 - 0) == ((64 - 0)/8) * 8 && sizeof(mp_limb_t) == ((64 - 0)/8)
libxml/xpath.c: In function 'xmlXPathCompPathExpr':
libxml/xpath.c:10627:1: internal compiler error: Aborted
 xmlXPathCompPathExpr(xmlXPathParserContextPtr ctxt) {
 ^
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
make[5]: *** [libxml/libxml_rpl_la-xpath.lo] Error 1

I didn't investigate why this is the case but rebuilding the bootstrap
tools seems to help.

I used this old-ish WIP branch https://github.com/dezgeg/nixpkgs/commits/arm-bootstrap
since latest master has even more problems with cross-compiling anything.
(I will eventually push this stuff and make the ARM bootstraps build on hydra.)
2016-03-17 15:59:04 +02:00
Vladimír Čunát
c643ccaa8c Merge #13950: move ncurses utilities to $out 2016-03-16 08:39:37 +01:00
Tim Cuthbertson
d05a3cd763 stdenv: don't overwrite $NIX_ENFORCE_PURITY setting
Close #13583.
2016-03-13 21:09:41 +01:00
Nicolas B. Pierron
6313a5698a Replace references to all-packages.nix, by references to the top-level of nixpkgs repository. 2016-03-13 18:25:52 +00:00
Thomas Tuegel
2667e4f5d7 make-bootstrap-tools: fix evaluation error on Darwin 2016-03-11 10:30:28 -06:00
Eelco Dolstra
dd53c65dcc Merge remote-tracking branch 'origin/gcc-5' into staging
Still some breakage but no blockers:

http://hydra.nixos.org/eval/1242130?filter=x86_64-linux&compare=1237852&full=#tabs-now-fail
2016-03-11 16:02:38 +01:00
Eelco Dolstra
2af1cb3aa6 Merge remote-tracking branch 'origin/binutils-2.26' into staging
This still breaks a few packages, but nothing really major:

  http://hydra.nixos.org/eval/1241850?filter=x86_64-linux&compare=1237919&full=#tabs-now-fail
2016-03-11 11:58:49 +01:00
Thomas Tuegel
3ef7671cea ncurses: combine $lib and $out outputs
The $lib output refers to the terminfo database in $out, which is about
10x larger than the ncurses shared library. Splitting these outputs
saves a small amount of space for any derivations that use the terminfo
database but not the ncurses library, but we do not have evidence that
any such exist.
2016-03-08 11:35:24 -06:00
Vladimír Čunát
09af15654f Merge master into closure-size
The kde-5 stuff still didn't merge well.
I hand-fixed what I saw, but there may be more problems.
2016-03-08 09:58:19 +01:00
Tuomas Tynkkynen
ad47355786 Merge remote-tracking branch 'upstream/master' into staging 2016-03-06 11:48:57 +02:00
Eelco Dolstra
a6d19c28f1 Don't apply patchelf to itself
Since patchelf 0.8 rewrites binaries in place, this causes a bus
error.
2016-03-03 13:57:45 +01:00
Vladimír Čunát
5702bc3b55 make-bootstrap-tools: fix #13629: glibc problems
On x86_64-linux glibc started to use linker scripts more extensively.

(cherry picked from commit aa564c9ed0)
2016-03-03 13:57:45 +01:00
Eelco Dolstra
639d7409f2 Move testBootstrapTools to make-bootstrap-tools.nix 2016-03-03 13:57:45 +01:00
Vladimír Čunát
aa564c9ed0 make-bootstrap-tools: fix #13629: glibc problems
On x86_64-linux glibc started to use linker scripts more extensively.
2016-03-03 12:09:50 +01:00
Danny Wilson
850a1a3323 Fix "nix" stdenv (close #13554)
Broken by changes introduced in d96893647d
2016-02-28 19:49:35 +01:00
Eelco Dolstra
c388380bb4 Switch to GCC 5 2016-02-28 17:54:11 +01:00
Eelco Dolstra
2040a9ac57 stdenv-linux: Ensure binutils comes before bootstrapTools in $PATH
Otherwise, when building glibc and other packages, the "strip" from
bootstrapTools is used, which doesn't recognise some tags produced by
the newer "ld" from binutils.
2016-02-28 01:13:15 +01:00
Eelco Dolstra
559ecc9212 stdenv-linux: Avoid building m4/bison twice 2016-02-28 01:12:58 +01:00
Eelco Dolstra
e6f61b4cf3 fetchurlBoot: Use Nix's builtin fetchurl function
This removes the need for curl in bootstrapTools, and enables https
for bootstrap tarballs.
2016-02-27 20:27:24 +01:00
Nikolay Amiantov
39609a0c94 stdenv: set SSL_CERT_FILE only if it isn't already 2016-02-25 13:53:29 +03:00
Eelco Dolstra
2f050b5d13 stdenvLinux: Use bash instead of sh from bootstrapTools
"sh" is also bash, but invoking it as "sh" disables certain features
like process substitution.

Closes #13395.
2016-02-24 11:01:11 +01:00
Eelco Dolstra
d71a4851e8 Don't try to apply patchelf to non-ELF binaries 2016-02-18 22:54:11 +01:00
Vladimír Čunát
ee994dfae6 bootstrap tools: have curl without http2 support
I assume there's not much use for it during bootstrapping.
This fixes them as well, as curl was compiled against libnghttp2 but the
lib wasn't copied to the bootstrap tools.
2016-02-17 10:04:32 +01:00
Dan Peebles
0a23d430bf stdenv-darwin: fix to work with multiple outputs 2016-02-13 15:48:22 -05:00
Vladimír Čunát
54299b60c4 Merge #12779: Mass replace pkg}/bin-style strings
... to refer to correct outputs
2016-02-03 17:25:22 +01:00
Vladimír Čunát
89036ef76a stdenv: accept wider range of $configureScript options
Fixes #12632.

I think it's better to quote this variable in general, because it is
common and even documented to pass space-separated commands in there.
The greps should just fail in that case and `if` won't proceed
which seems fine for such cases, and it's certainly better than
passing additional unintended parameters to grep
(which was happening all the time before).
2016-02-03 17:15:11 +01:00
Vladimír Čunát
ae74c356d9 Merge recent 'staging' into closure-size
Let's get rid of those merge conflicts.
2016-02-03 16:57:19 +01:00
Eelco Dolstra
917ca8920d Move setting $SSL_CERT_FILE to stdenv
Doing it in an openssl setup hook only works if packages have openssl
as a build input - it doesn't work if they're using a program linked
against openssl.
2016-02-03 13:59:10 +01:00
Tuomas Tynkkynen
5f4a8de754 treewide: Mass replace 'bzip2}/bin' to refer the 'bin' output 2016-02-01 20:45:57 +02:00
Eelco Dolstra
f4553d7219 defaultUnpack: Preserve timestamps when copying files
Commit 6d928ab684 changed this to not
preserve timestamps. However, that results in non-determinism; in
particular, it gives us a broken $SOURCE_DATE_EPOCH (especially for
everything using fetchFromGitHub). Builds affected by timestamps <
1980 should be fixed in some other way (e.g. changing the timestamp to
some fixed date > 1980).
2016-01-26 16:24:32 +01:00
Vladimír Čunát
98c7e70a3f linux stdenv bootstrap: avoid building grep twice
It's perfectly enough when we use the bootstrapped grep everywhere
except the one put into the final stdenv and final pkgs.
2016-01-25 09:55:00 +01:00
Tuomas Tynkkynen
ed7dbb46a8 treewide: Mass replace 'zlib}/lib' to refer the 'out' output 2016-01-24 10:03:39 +02:00
Tuomas Tynkkynen
ba87da9fd1 treewide: Mass replace 'pcre}/lib' to refer the 'out' output 2016-01-24 10:03:38 +02:00
Tuomas Tynkkynen
04c5830432 treewide: Mass replace 'mpfr}/lib' to refer the 'out' output 2016-01-24 10:03:38 +02:00
Tuomas Tynkkynen
c2ceed1ad1 treewide: Mass replace 'binutils}/lib' to refer the 'out' output 2016-01-24 10:03:33 +02:00
Anthony Cowley
5986aecc4c Linux stdenv update: pass gnugrep to cc-wrapper 2016-01-24 00:18:32 -05:00
Anthony Cowley
d96893647d cc-wrapper: fix on darwin
The ld-wrapper.sh script calls `readlink` in some circumstances. We need
to ensure that this is the `readlink` from the `coreutils` package so
that flag support is as expected.

This is accomplished by explicitly setting PATH at the top of each shell
script.

Without doing this, the following happens with a trivial `main.c`:

```
nix-env -f "<nixpkgs>" -iA pkgs.clang
$ clang main.c -L /nix/../nix/store/2ankvagznq062x1gifpxwkk7fp3xwy63-xnu-2422.115.4/Library -o a.out
readlink: illegal option -- f
usage: readlink [-n] [file ...]
```

The key element is the `..` in the path supplied to the linker via a
`-L` flag. With this patch, the above invocation works correctly on
darwin, whose native `/usr/bin/readlink` does not support the `-f` flag.

The explicit path also ensures that the `grep` called by `cc-wrapper.sh`
is the one from Nix.

Fixes #6447
2016-01-19 17:47:11 -05:00
Vladimír Čunát
716aac2519 Merge branch 'staging' into closure-size 2016-01-19 09:55:31 +01:00
Vladimír Čunát
620c147cce Merge branch 'master' into staging 2016-01-18 09:48:49 +01:00
Dan Peebles
edaf46fb64 stdenv-darwin: add parent attribute to bootstrap
This makes it far easier than before to hit/test early stages of the
stdenv bootstrap.
2016-01-16 14:54:11 -05:00
Eelco Dolstra
81e530a749 Set SOURCE_DATE_EPOCH to latest source file
This provides a timestamp that's more useful than 1970-01-01 yet still
deterministic.
2016-01-05 17:21:48 +01:00
Eelco Dolstra
f31fbadac3 Set a fallback default value for SOURCE_DATE_EPOCH
This is used by some build tools to provide reproducible builds. See

  https://reproducible-builds.org/specs/source-date-epoch/

for more info.

Later, we'll want to set this to a more intelligent value (such as the
most recent mtime of any source file).
2016-01-05 17:21:48 +01:00
Vladimír Čunát
b1acaffe67 Merge branch 'master' into staging 2016-01-05 10:28:58 +01:00
Vladimír Čunát
7c879d342d Merge #10816: improve FreeBSD support 2016-01-05 09:50:10 +01:00
Vladimír Čunát
1ebff73b88 stdenv/setup.sh: don't skip post-hooks (close #12032)
So far if no configure script is found or no makefile,
the rest of the phase is skipped, *including* post-hooks.
I find that behavior unexpected/unintuitive.

Earlier version of this patch had problems due to me assuming
that $configureScript is always a simple path, but that turned out
to be false in many cases, e.g. perl.
2016-01-05 09:34:02 +01:00
Dan Peebles
0313b2e09c stdenv-darwin: allow easier testing of bootstrap tools
This un-hardcodes the bootstrap tools passed into the Darwin stdenv and
thus allows us to quickly iterate on improving the design of the full
bootstrap process. We can easily change the contents of the bootstrap
tools and evaluate an entire bootstrap all the way up to real packages.
2016-01-03 21:47:09 -05:00
Dan Peebles
88c41e1f95 stdenv-darwin: rename folder and associated attribute
No point in calling it pure-darwin anymore. It's the only stdenv we have
2016-01-03 21:08:40 -05:00
Dan Peebles
01b0b3cec0 stdenv-darwin: kill old impure Darwin stdenv
I'll be moving the other one over it next commit (I split it into two to
improve git's rename detection)
2016-01-03 21:06:24 -05:00
janus
072da541de FreeBSD: undo removal of Solaris and remove changes to native stdenv now that FreeBSD has its own 2016-01-01 17:01:13 +00:00
janus
3c8f0a92d3 FreeBSD: improve bootstrapping, re-enable bdb for heimdal 2016-01-01 17:01:13 +00:00
janus
55aa9163cc FreeBSD: minor fixes, add notes and make stdenv more robust 2016-01-01 17:01:13 +00:00
janus
a472d836f6 FreeBSD: apr-util, cyrus-sasl, berkeley db, glib, gnutls, kerberos, libelf-freebsd, openldap, serf, guile, tet, shishi, gawk, gnugrep 2016-01-01 17:01:13 +00:00
janus
9897b35661 FreeBSD: patch expat, kerberos, libedit, ossp-uuid, lz4, sharutils, add libelf-freebsd 2016-01-01 17:01:13 +00:00
janus
f351aaaf85 FreeBSD: use own stdenv, do not run libtiff tests, use PIC for zlib 2016-01-01 17:01:13 +00:00
janus
2d00f27230 FreeBSD: use clang37 2016-01-01 17:01:13 +00:00
janus
c01dbc4932 FreeBSD patches for GNU m4, stdenv, miniupnpc 2016-01-01 17:01:13 +00:00
Vladimír Čunát
f9f6f41bff Merge branch 'master' into closure-size
TODO: there was more significant refactoring of qtbase and plasma 5.5
on master, and I'm deferring pointing to correct outputs to later.
2015-12-31 09:53:02 +01:00
Dan Peebles
527f3574b7 stdenvBootstrapTools.x86_64-darwin: unbreak
This is blocking Hydra from updating the nixpkgs-unstable channel. Also
add myself as a maintainer so Hydra can notify me if it breaks again
2015-12-28 16:59:37 -05:00
Luca Bruno
5b0352a6a4 Merge branch 'master' into closure-size 2015-12-11 18:31:00 +01:00
Domen Kožar
781b9eab61 allow{reason}: a bit more explicit error message 2015-12-09 17:01:46 +01:00
Vladimír Čunát
263fd55d4b Merge recent staging built on Hydra
http://hydra.nixos.org/eval/1231884
Only Darwin jobs seem to be queued now,
but we can't afford to wait for that single build slave.
2015-12-05 11:11:51 +01:00
Luca Bruno
920b1d3591 Merge branch 'master' into closure-size 2015-11-29 16:50:26 +01:00
Profpatsch
ee07543ccd stdenv: licenseAllowed -> checkValidity
Rename and make it a true function (that can be re-used and could be
moved to the library).
2015-11-27 21:56:28 +01:00
Jude Taylor
f5609a4d2a reintroduce impure host deps to all derivations 2015-11-21 15:51:48 -08:00
Jude Taylor
69e7f3bb74 switch to zero underscores for sandbox profiles; remove generateFrameworkProfile 2015-11-21 12:10:33 -08:00
Jude Taylor
a63346e33c use single underscore for sandboxProfile 2015-11-21 11:17:30 -08:00
Vladimír Čunát
333d69a5f0 Merge staging into closure-size
The most complex problems were from dealing with switches reverted in
the meantime (gcc5, gmp6, ncurses6).
It's likely that darwin is (still) broken nontrivially.
2015-11-20 14:32:58 +01:00
Jude Taylor
131e831cb9 allow networking by default and remove it from derivations 2015-11-19 11:31:06 -08:00
Jude Taylor
163acc0efa remove useless muting lines; they interfere with debugging 2015-11-19 11:31:06 -08:00
Jude Taylor
df80090d09 use per-derivation sandbox profiles 2015-11-19 11:31:06 -08:00
Jude Taylor
914e9baefe start on sandbox stuff 2015-11-19 11:31:06 -08:00
Wout Mertens
774f74b875 Don't fail if env-vars cannot be written to
env-vars is a debugging aid, see
3e5dbb2433
for a rationale for this change.
2015-11-04 16:32:59 +01:00
William A. Kennington III
dd2de66d61 Merge branch 'master.upstream' into staging.upstream 2015-10-30 17:16:07 -07:00
Eelco Dolstra
971430f623 Move stdenv-darwin bootstrap binaries to nixos.org
These are taken from http://hydra.nixos.org/build/27002702.
2015-10-29 22:16:06 +01:00
Jude Taylor
85ba0035bd rebase on eelco's bootstrap-tools changes 2015-10-23 10:27:34 -07:00