This option was added by mistake since `listenAddress` exists by default
for each prometheus-exporter. Using
`services.prometheus.exporters.wireguard.addr` will now cause a warning,
but doesn't break eval.
Having `display-manager` conflict with `plymouth-quit` causes this lock up:
- `plymouth-quit-wait` starts up, waiting for plymouth-quit to run
- `lightdm` starts up
- `plymouth-quit` can't start, it conflicts with lightdm
- `plymouth-quit-wait` keeps waiting on plymouth-quit to kill plymouthd
The idea is having LightDM control when plymouth quits, but communication with
plymouth was broken: https://github.com/NixOS/nixpkgs/pull/71064
Unfortunately having the conflict breaks switching to configurations with
plymouth enabled. So we still need to remove the conflict.
fixes#71034
The rationale for this is that old filesystems have recieved little scrutiny
wrt. security relevant bugs.
Lifted from OpenSUSE[1].
[1]: 8cb42fb665
Co-Authored-By: Renaud <c0bw3b@users.noreply.github.com>
Default getfacl behavior is to remove leading slash on absolute
paths in its header printed to stdout.
Before the header it will also print a message about it...
Switches -p -or --absolute-names can turn this off
and remove some noise from our tests logs.
In fact, don't create them at all because Nix does that automatically.
Also remove modules/programs/shell.nix because everything it did is
now done automatically by Nix.
gitlab:db:configure prints the root user's password to stdout on
successful setup, which means it will be logged to the
journal. Silence this informational output. Errors are printed to
stderr and will thus still be let through.
The mime type definitions included with nginx are very incomplete, so
we use a list of mime types from the mailcap package, which is also
used by most other Linux distributions by default.
The networking.virtual test does not work with networkd yet, for
multiple reasons:
- network-online.target is not reached, because tun0 and tap0 are
considered as required for online but _not_ brought up or assigned
the configured addresses
- the commands later in the test rely on some units from the scripted
network setup
cc @fpletz networkd exper
cc @globin we looked at this together
I have `users.defaultUserShell = pkgs.fish;` set on my server and when I ran `nixos-rebuild switch --target-host …`, the command failed with the following error:
fish: Unsupported use of '='. To run 'nix-store' with a modified environment, please use 'env PATH=… nix-store…'
That is because fish requires env to set environment variables for a program. It should also work on other shells.
This reverts commit e9bf955fd6. We use
nixos-install to ensure that make-disk-image produces the same result
as a regular installation (9802da517f)
and to reduce code duplication. If there is something broken in
nixos-install, it should be fixed there.
xfce4-volumed-pulse is not abandoned, but is superseded by a panel
plugin which is not available when not using the desktop.
Fixes: volume up/down keys support
These improvements come from shopping around
at what other downstreams have done with their
systemd units and recent changes like [0] to gdm.
Note there's no requries or after on dbus.socket because
settings BusName will set this up automaticallly and
give it a type of dbus.
[0]: 2d57f45962
uinput needs to be added to boot.kernelModules in order for the udev
rules defined by steam to be run and set permissions correctly on
/dev/uinput.
See https://github.com/NixOS/nixpkgs/issues/70471.
List all modules that *may* be required depending on individual container
configurations; don't expect that further modules can be loaded after boot.
Fixes https://github.com/NixOS/nixpkgs/issues/38676
The initializers directory is populated with files from the gitlab
distribution on start, but old files will be left in the state folder
even if they're removed from the distribution, which can lead to
startup failures. Fix this by always purging the directory on start
before populating it.
Since the preStart script is no longer running in privileged mode, we
reassign the files in the state directory and its config subdirectory
to the user we're running as. This is done by splitting the preStart
script into a privileged and an unprivileged part where the privileged
part does the reassignment.
Also, delete the database.yml symlink if it exists, since we want to
create a real file in its place.
Fixes#68696.
This introduces an option wifi.backend to the networkmanager module.
Co-authored-by: Cole Mickens <cole.mickens@gmail.com>
Co-authored-by: worldofpeace <worldofpeace@protonmail.ch>
GNOME initial setup's run is conditioned on whether
the gnome-initial-setup-done file exists in XDG_CONFIG_HOME
Because of this, every existing user will have initial setup
running because they never ran it before.
To prevent this we create the file if the users stateVersion
is older than 20.03 (the release we added this module).
Also drop uneeded manual conflicts as systemd.packages
does handle this.
We were only replacing them in the profiles. We also need to do this in
the values of variables, including both the session-relative variables
and the non-session-relative variables.
- register gnome-session and gnome-settings-daemon services.
- gnome-shell is already registered due to having a xdg portal
- manually specify that gsd is wanted by gnome-session
(systemd.packages doesn't pick the .wants directories for some reason)
GDM is now killed if tty1 is started after gdm is launched. This follows
upstream's gdm service config.
This might cause problems with nixos-rebuild switch though. See the reasoning
and work that led to not following upstream on this:
https://github.com/NixOS/nixpkgs/issues/214394a180dac46d4da
We don't want to ignore config that can mess up machines. In general
this should always fail evaluation, as you think you are changing
behaviour and don't, which can easily create run-time errors we can
catch early.
The test has recently been failing due to the IPv6 address
on the server still being in the tentative state, when the
client sends its first request. The server will not start
using the IPv6 address until DAD has completed.
Scripted networking seems not to wait for DAD completion
before completing network-online.target, so let's switch
to networkd instead, which does.
https://github.com/MindFlavor/prometheus_wireguard_exporter/releases/tag/3.1.1
This release adds a flag `-l` which takes an address where the exporter
is available. The default is `0.0.0.0` (previously, `0.0.0.0` was used
by default).
Please note that there are no dependency changes in Cargo and therefore
the cargo hash didn't change.
Since version 2.3 (https://github.com/NixOS/nix/pull/2949 which was
cherry-picked to master) Nix issues a warning when --no-net wasn't
passed and there is no network interface. This commit adds the --no-net
flag to the nix.conf check such that no warning is issued.
This commits makes it clearer to a novice reader how to configure several
diferent types of SSID connections that were otherwise obscurely documented
Resolves#66650
Quoting from the splitString docstring:
NOTE: this function is not performant and should never be used.
This replaces trivial uses of splitString for splitting version
strings with the (potentially builtin) splitVersion.
Fixes eval on darwin after #69072
Resolved conflict in pkgs/tools/security/thc-hydra/default.nix
Basically had to revert a1c0e10564 which
adapts #69210 to master that doesn't yet have
329a88efa7
Tested using maintainers/scripts/eval-release.sh before and after to see
that the fix works
This commit adds a Strict-Transport-Security header to
the nginx config file generated by the nextcloud module.
The Strict-Transport-Security header is recommended in
official guide for hardening Nextcloud installations:
https://docs.nextcloud.com/server/16/admin_manual/installation/harden_server.html
Further, if it is not set, we see a warning in the security scan results
in the Nextcloud admin panel:
```
The "Strict-Transport-Security" HTTP header is not set to at least "15552000" seconds. For enhanced security, it is recommended to enable HSTS as described in the security tips
```
Images generated with nixos-install will be supported by machinectl
problem is that systemd-nspawn's private usersns feature clashes
with DynamicUser and RuntimeDirectory features, which causes NixOS
images to not boot. There is an upstream issue for this
https://github.com/systemd/systemd/issues/13622
Make sure that we don't create a database if we're not going to
connect to it. Also, fix the assertion that usernames be equal to only
trig when peer authentication is used (databaseHost == "").
config.services.postgresql.package is only defined when the postgresql
service is activated, which means we fail to evaluate when
databaseCreateLocally == false. Fix this by using the default
postgresql package when the postgresql service is disabled.
This sets networking.useDHCP to false and for all interfaces found the
per-interface useDHCP to true. This replicates the current default
behaviour and prepares for the switch to networkd.
The state path now, since the transition from initialization in
preStart to using systemd-tmpfiles, has the following restriction: no
parent directory can be owned by any other user than root or the user
specified in services.gitlab.user. This is a potentially breaking
change and the cause of the error isn't immediately obvious, so
document it both in the release notes and statePath description.
In #68792 it was discovered that /dev/fuse doesn't have
wordl-read-writeable permissions anymore. The cause of this is that the
tmpfiles examples in systemd were reorganized and split into more files.
We thus lost some of the configuration we were depending on.
In this commit some of the new tmpfiles configuration that are
applicable to us are added which also makes wtmp/lastlog in the pam
module not necessary anymore.
Rationale for the new tmpfile configs:
- `journal-nowcow.conf`: Contains chattr +C for journald logs which
makes sense on copy-on-write filesystems like Btrfs. Other filesystems
shouldn't do anything funny when that flag is set.
- `static-nodes-permissions.conf`: Contains some permission overrides
for some device nodes like audio, loop, tun, fuse and kvm.
- `systemd-nspawn.conf`: Makes sure `/var/lib/machines` exists and old
snapshots are properly removed.
- `systemd-tmp.conf`: Removes systemd services related private tmp
folders and temporary coredump files.
- `var.conf`: Creates some useful directories in `/var` which we would
create anyway at some point. Also includes
`/var/log/{wtmp,btmp,lastlog}`.
Fixes#68792.
