Apparently, without this patch `NT_PRSTATUS` is not found. So the patch
adds the include apparently necessary. `NT_PRSTATUS` is also defined in
`<linux/ptrace.h>`, which would likely have been a better name, were it
not in the `linux/` directory, which is a priori not stable.
The need to do that is kind of weird (the change was introduced in [1],
and fedora apparently didn't need this additional import), but I'll try
to upstream it.
[1] https://github.com/SimonKagstrom/kcov/pull/239
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
(cherry picked from commit ba52ae5048)
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
On GNU/Linux the build references these files, so let's fetch them from
the Chromium repository. I haven't checked whether they are heavily
patched or whether we can use the version from LLVM, but when looking at
the changes, they do seem to divert a bit from upstream LLVM.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @matthewbauer, @stesie
The tarball from upstream seems to be generated on the fly, so the
output is not deterministic and using fetchzip makes this more reliable
as we have a recursively hashed output path without any of the
non-determinisms in tarballs.
Unfortunately, the build still fails on NixOS systems, because we need a
few more stuff in the build tree.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @matthewbauer, @stesie
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/chromedriver/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/bnjr4qgd68lh8fdz2hxz7qrc1zvvxkni-chromedriver-2.38/bin/chromedriver -h’ got 0 exit code
- ran ‘/nix/store/bnjr4qgd68lh8fdz2hxz7qrc1zvvxkni-chromedriver-2.38/bin/chromedriver --help’ got 0 exit code
- found 2.38 with grep in /nix/store/bnjr4qgd68lh8fdz2hxz7qrc1zvvxkni-chromedriver-2.38
- directory tree listing: https://gist.github.com/8ba491f60826e1ad2389e69f92fb6116
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/jbake/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/l85kq1n5mv8shw19rd26vx1qh2q2xj98-jbake-2.6.1/bin/jbake -h’ got 0 exit code
- ran ‘/nix/store/l85kq1n5mv8shw19rd26vx1qh2q2xj98-jbake-2.6.1/bin/jbake --help’ got 0 exit code
- ran ‘/nix/store/l85kq1n5mv8shw19rd26vx1qh2q2xj98-jbake-2.6.1/bin/jbake help’ got 0 exit code
- found 2.6.1 with grep in /nix/store/l85kq1n5mv8shw19rd26vx1qh2q2xj98-jbake-2.6.1
- directory tree listing: https://gist.github.com/27e3a60a9041b9898ce150344a6c3db4
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/mypy/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/.dmypy-wrapped -h’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/.dmypy-wrapped --help’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/.dmypy-wrapped help’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/dmypy -h’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/dmypy --help’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/dmypy help’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/.mypy-wrapped -h’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/.mypy-wrapped --help’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/.mypy-wrapped -V’ and found version 0.590
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/.mypy-wrapped --version’ and found version 0.590
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/mypy -h’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/mypy --help’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/mypy -V’ and found version 0.590
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/mypy --version’ and found version 0.590
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/.stubgen-wrapped -h’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/.stubgen-wrapped --help’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/.stubgen-wrapped help’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/stubgen -h’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/stubgen --help’ got 0 exit code
- ran ‘/nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590/bin/stubgen help’ got 0 exit code
- found 0.590 with grep in /nix/store/949glp2ll51fziqzy2xnma6zvvn6ihlq-mypy-0.590
- directory tree listing: https://gist.github.com/28a5c2600f864ea85373e565ced612c6
This has already been patched against gnumake4 (519f0b8db2)
but we still have packages depending on gnumake3, so let's also apply
the same patch to gnumake 3.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @shlevy, @vcunat
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/apktool/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/dhjjw9xk7rx4gm6ngpgbf5kdhcgaxdgw-apktool-2.3.2/bin/apktool -h’ got 0 exit code
- ran ‘/nix/store/dhjjw9xk7rx4gm6ngpgbf5kdhcgaxdgw-apktool-2.3.2/bin/apktool --help’ got 0 exit code
- ran ‘/nix/store/dhjjw9xk7rx4gm6ngpgbf5kdhcgaxdgw-apktool-2.3.2/bin/apktool help’ got 0 exit code
- ran ‘/nix/store/dhjjw9xk7rx4gm6ngpgbf5kdhcgaxdgw-apktool-2.3.2/bin/apktool --version’ and found version 2.3.2
- found 2.3.2 with grep in /nix/store/dhjjw9xk7rx4gm6ngpgbf5kdhcgaxdgw-apktool-2.3.2
- directory tree listing: https://gist.github.com/7989c4dc760bbeb74791e11fb1bbebb1
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/strace/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/x7d4g7rvf9z43xjz7mc8c4nzwphghjj7-strace-4.22/bin/strace -h’ got 0 exit code
- ran ‘/nix/store/x7d4g7rvf9z43xjz7mc8c4nzwphghjj7-strace-4.22/bin/strace-log-merge -h’ got 0 exit code
- ran ‘/nix/store/x7d4g7rvf9z43xjz7mc8c4nzwphghjj7-strace-4.22/bin/strace-log-merge --help’ got 0 exit code
- ran ‘/nix/store/x7d4g7rvf9z43xjz7mc8c4nzwphghjj7-strace-4.22/bin/strace-log-merge help’ got 0 exit code
- found 4.22 with grep in /nix/store/x7d4g7rvf9z43xjz7mc8c4nzwphghjj7-strace-4.22
- directory tree listing: https://gist.github.com/4c8ab8738133d11c611ae7290d25d6fc
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/cppcheck/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/y9shqxbgyq6g7v5vx76f69901yb8sj06-cppcheck-1.83/bin/naming.py -h’ got 0 exit code
- ran ‘/nix/store/y9shqxbgyq6g7v5vx76f69901yb8sj06-cppcheck-1.83/bin/naming.py --help’ got 0 exit code
- ran ‘/nix/store/y9shqxbgyq6g7v5vx76f69901yb8sj06-cppcheck-1.83/bin/naming.py help’ got 0 exit code
- ran ‘/nix/store/y9shqxbgyq6g7v5vx76f69901yb8sj06-cppcheck-1.83/bin/y2038.py -h’ got 0 exit code
- ran ‘/nix/store/y9shqxbgyq6g7v5vx76f69901yb8sj06-cppcheck-1.83/bin/y2038.py --help’ got 0 exit code
- ran ‘/nix/store/y9shqxbgyq6g7v5vx76f69901yb8sj06-cppcheck-1.83/bin/y2038.py help’ got 0 exit code
- ran ‘/nix/store/y9shqxbgyq6g7v5vx76f69901yb8sj06-cppcheck-1.83/bin/cppcheck -h’ got 0 exit code
- ran ‘/nix/store/y9shqxbgyq6g7v5vx76f69901yb8sj06-cppcheck-1.83/bin/cppcheck --help’ got 0 exit code
- ran ‘/nix/store/y9shqxbgyq6g7v5vx76f69901yb8sj06-cppcheck-1.83/bin/cppcheck --version’ and found version 1.83
- found 1.83 with grep in /nix/store/y9shqxbgyq6g7v5vx76f69901yb8sj06-cppcheck-1.83
- directory tree listing: https://gist.github.com/49acebba8d7d9e3af647133ae23bd1cb
With this patch I remove myself as a maintainer for all packages I
currently maintain.
This is due the fact that I will be basically off the grid from May 2018
until early 2019, as I will be on a trip through north america.
I will revert this patch as soon as I'm back, as I plan to continue
contributing to nixpkgs then.
But as I cannot maintain anything during that time, I'd like to get this
patch merged.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/sysbench/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/d3633p13b97v5r5xswf85v9fxql1jv72-sysbench-1.0.14/bin/sysbench --help’ got 0 exit code
- ran ‘/nix/store/d3633p13b97v5r5xswf85v9fxql1jv72-sysbench-1.0.14/bin/sysbench --version’ and found version 1.0.14
- found 1.0.14 with grep in /nix/store/d3633p13b97v5r5xswf85v9fxql1jv72-sysbench-1.0.14
- directory tree listing: https://gist.github.com/56c18be2af370efb1c887dd27074fd4e
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/lttng-tools/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/jfs54222qa6kkqs2vnf54p48ar94h6r1-lttng-tools-2.10.3/bin/lttng -V` and found version 2.10.3
- ran `/nix/store/jfs54222qa6kkqs2vnf54p48ar94h6r1-lttng-tools-2.10.3/bin/lttng --version` and found version 2.10.3
- ran `/nix/store/jfs54222qa6kkqs2vnf54p48ar94h6r1-lttng-tools-2.10.3/bin/lttng version` and found version 2.10.3
- ran `/nix/store/jfs54222qa6kkqs2vnf54p48ar94h6r1-lttng-tools-2.10.3/bin/lttng-crash -V` and found version 2.10.3
- ran `/nix/store/jfs54222qa6kkqs2vnf54p48ar94h6r1-lttng-tools-2.10.3/bin/lttng-crash --version` and found version 2.10.3
- found 2.10.3 with grep in /nix/store/jfs54222qa6kkqs2vnf54p48ar94h6r1-lttng-tools-2.10.3
- directory tree listing: https://gist.github.com/bf4b92fc08881141af11b0444ed15630
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/chromedriver/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/z1h08azp3xdik94is0g2m2y5pvdfy4fc-chromedriver-2.37/bin/chromedriver -h` got 0 exit code
- ran `/nix/store/z1h08azp3xdik94is0g2m2y5pvdfy4fc-chromedriver-2.37/bin/chromedriver --help` got 0 exit code
- ran `/nix/store/z1h08azp3xdik94is0g2m2y5pvdfy4fc-chromedriver-2.37/bin/chromedriver -v` and found version 2.37
- ran `/nix/store/z1h08azp3xdik94is0g2m2y5pvdfy4fc-chromedriver-2.37/bin/chromedriver --version` and found version 2.37
- ran `/nix/store/z1h08azp3xdik94is0g2m2y5pvdfy4fc-chromedriver-2.37/bin/chromedriver -h` and found version 2.37
- ran `/nix/store/z1h08azp3xdik94is0g2m2y5pvdfy4fc-chromedriver-2.37/bin/chromedriver --help` and found version 2.37
- found 2.37 with grep in /nix/store/z1h08azp3xdik94is0g2m2y5pvdfy4fc-chromedriver-2.37
- directory tree listing: https://gist.github.com/d24f8e2019df676c89bb32d16ee980ed
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/doit/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/xgn48w19lgr8xnijgqcx91389b5hldv2-doit-0.31.1/bin/.doit-wrapped --help` got 0 exit code
- ran `/nix/store/xgn48w19lgr8xnijgqcx91389b5hldv2-doit-0.31.1/bin/.doit-wrapped help` got 0 exit code
- ran `/nix/store/xgn48w19lgr8xnijgqcx91389b5hldv2-doit-0.31.1/bin/.doit-wrapped --version` and found version 0.31.1
- ran `/nix/store/xgn48w19lgr8xnijgqcx91389b5hldv2-doit-0.31.1/bin/doit --help` got 0 exit code
- ran `/nix/store/xgn48w19lgr8xnijgqcx91389b5hldv2-doit-0.31.1/bin/doit help` got 0 exit code
- ran `/nix/store/xgn48w19lgr8xnijgqcx91389b5hldv2-doit-0.31.1/bin/doit --version` and found version 0.31.1
- found 0.31.1 with grep in /nix/store/xgn48w19lgr8xnijgqcx91389b5hldv2-doit-0.31.1
- directory tree listing: https://gist.github.com/a0ba66d49e0c01c3003ca50e9ad705a0
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
/tmp/tmp.I0xNTw0Lrg /home/ryantm/.cache/nixpkgs
/home/ryantm/.cache/nixpkgs
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 3.1.0 with grep in /nix/store/rg3dh55klmmy5gffvv353nbgwjg0mh11-js_of_ocaml-3.1.0
- directory tree listing: https://gist.github.com/4afbe9caa678f6e8124185a1cc5d2a9c
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/mypy/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.dmypy-wrapped -h` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.dmypy-wrapped --help` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.dmypy-wrapped help` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/dmypy -h` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/dmypy --help` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/dmypy help` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.mypy-wrapped -h` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.mypy-wrapped --help` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.mypy-wrapped -V` and found version 0.580
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.mypy-wrapped --version` and found version 0.580
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/mypy -h` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/mypy --help` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/mypy -V` and found version 0.580
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/mypy --version` and found version 0.580
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.stubgen-wrapped -h` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.stubgen-wrapped --help` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.stubgen-wrapped help` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.stubgen-wrapped version` and found version 0.580
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/.stubgen-wrapped help` and found version 0.580
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/stubgen -h` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/stubgen --help` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/stubgen help` got 0 exit code
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/stubgen version` and found version 0.580
- ran `/nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580/bin/stubgen help` and found version 0.580
- found 0.580 with grep in /nix/store/gzpx9ph7vrm4c3hqiy6b7lfbzvbpz3gm-mypy-0.580
- directory tree listing: https://gist.github.com/63b1f0c61670aaf2501d007ddb06581a
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/pmd/versions.
These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 6.2.0 with grep in /nix/store/flm3k0shklh231zj06ksx2h0zvb1kvp5-pmd-6.2.0
- found 6.2.0 in filename of file in /nix/store/flm3k0shklh231zj06ksx2h0zvb1kvp5-pmd-6.2.0
- directory tree listing: https://gist.github.com/99fc1a75766445dbe9a6459e2fe10750
Semi-automatic update generated by https://github.com/ryantm/nix-update tools.
This update was made based on information from https://repology.org/metapackage/jbake/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/mn3b11ybbp508yngrds39czbycjhacf6-jbake-2.6.0/bin/jbake -h` got 0 exit code
- ran `/nix/store/mn3b11ybbp508yngrds39czbycjhacf6-jbake-2.6.0/bin/jbake --help` got 0 exit code
- ran `/nix/store/mn3b11ybbp508yngrds39czbycjhacf6-jbake-2.6.0/bin/jbake help` got 0 exit code
- ran `/nix/store/mn3b11ybbp508yngrds39czbycjhacf6-jbake-2.6.0/bin/jbake version` and found version 2.6.0
- ran `/nix/store/mn3b11ybbp508yngrds39czbycjhacf6-jbake-2.6.0/bin/jbake -h` and found version 2.6.0
- ran `/nix/store/mn3b11ybbp508yngrds39czbycjhacf6-jbake-2.6.0/bin/jbake --help` and found version 2.6.0
- ran `/nix/store/mn3b11ybbp508yngrds39czbycjhacf6-jbake-2.6.0/bin/jbake help` and found version 2.6.0
- found 2.6.0 with grep in /nix/store/mn3b11ybbp508yngrds39czbycjhacf6-jbake-2.6.0
- found 2.6.0 in filename of file in /nix/store/mn3b11ybbp508yngrds39czbycjhacf6-jbake-2.6.0
- directory tree listing: https://gist.github.com/1cd96e2ec3fd1a83c4b62c8a7213936c
Semi-automatic update generated by https://github.com/ryantm/nix-update tools.
This update was made based on information from https://repology.org/metapackage/babeltrace/versions.
These checks were done:
- built on NixOS
- ran `/nix/store/yhd43sy0rj5fr0gwh298l959b7bmcsh8-babeltrace-1.5.5/bin/babeltrace -h` got 0 exit code
- ran `/nix/store/yhd43sy0rj5fr0gwh298l959b7bmcsh8-babeltrace-1.5.5/bin/babeltrace --help` got 0 exit code
- ran `/nix/store/yhd43sy0rj5fr0gwh298l959b7bmcsh8-babeltrace-1.5.5/bin/babeltrace -h` and found version 1.5.5
- ran `/nix/store/yhd43sy0rj5fr0gwh298l959b7bmcsh8-babeltrace-1.5.5/bin/babeltrace --help` and found version 1.5.5
- ran `/nix/store/yhd43sy0rj5fr0gwh298l959b7bmcsh8-babeltrace-1.5.5/bin/babeltrace-log -h` got 0 exit code
- ran `/nix/store/yhd43sy0rj5fr0gwh298l959b7bmcsh8-babeltrace-1.5.5/bin/babeltrace-log -h` and found version 1.5.5
- found 1.5.5 with grep in /nix/store/yhd43sy0rj5fr0gwh298l959b7bmcsh8-babeltrace-1.5.5
- directory tree listing: https://gist.github.com/d849a2026946a7542bc3e2e6a586d713
Uses the HTTPS url for cases where the existing URL has a permanent
redirect. For each domain, at least one fixed derivation URL was
downloaded to test the domain is properly serving downloads.
Also fixes jbake source URL, which was broken.
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 2.0.6 with grep in /nix/store/5rgayqfl64bn9pyrfsc9kcm2c4vdqybi-waf-2.0.6
- found 2.0.6 in filename of file in /nix/store/5rgayqfl64bn9pyrfsc9kcm2c4vdqybi-waf-2.0.6
Upstream insists on not allowing bindir and other dir options
outside of prefix for some reason:
https://github.com/mesonbuild/meson/issues/2561
We remove the check so multiple outputs can work sanely.
In common distributions, RPATH is only needed for internal libraries so
meson removes everything else. With Nix, the locations of libraries
are not as predictable, therefore we need to keep them in the RPATH. [1]
Previously we have just kept the RPATH produced by the linker, patching
meson not to remove it. This deprived us of potentially replacing it
with install_rpath provided by project so we had to re-add it manually,
and also introduced a vulnerability of keeping build paths in RPATH.
This commit restores the clean-up but modifies it so the items starting
with /nix/store are retained.
This should be relatively safe since the store is immutable, however,
there might be some unwanted retainment of build_rpath [2] if it contains
paths from Nix store.
[1]: https://github.com/NixOS/nixpkgs/issues/31222#issuecomment-365811634
[2]: http://mesonbuild.com/Release-notes-for-0-42-0.html#added-build_rpath-keyword-argument
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/b1b0f9iyawv0rm483q2fbbfhgjgpjdik-ocamlbuild-0.12.0/bin/ocamlbuild --help` got 0 exit code
- ran `/nix/store/b1b0f9iyawv0rm483q2fbbfhgjgpjdik-ocamlbuild-0.12.0/bin/ocamlbuild --version` and found version 0.12.0
- ran `/nix/store/b1b0f9iyawv0rm483q2fbbfhgjgpjdik-ocamlbuild-0.12.0/bin/ocamlbuild --help` and found version 0.12.0
- ran `/nix/store/b1b0f9iyawv0rm483q2fbbfhgjgpjdik-ocamlbuild-0.12.0/bin/ocamlbuild.native --help` got 0 exit code
- ran `/nix/store/b1b0f9iyawv0rm483q2fbbfhgjgpjdik-ocamlbuild-0.12.0/bin/ocamlbuild.native --version` and found version 0.12.0
- ran `/nix/store/b1b0f9iyawv0rm483q2fbbfhgjgpjdik-ocamlbuild-0.12.0/bin/ocamlbuild.native --help` and found version 0.12.0
- found 0.12.0 with grep in /nix/store/b1b0f9iyawv0rm483q2fbbfhgjgpjdik-ocamlbuild-0.12.0
- directory tree listing: https://gist.github.com/3b75d2c602f455856f9642228b53d2e7
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks --help` got 0 exit code
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks help` got 0 exit code
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks --version` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks --help` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks help` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-5.1 --help` got 0 exit code
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-5.1 help` got 0 exit code
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-5.1 --version` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-5.1 --help` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-5.1 help` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-admin --help` got 0 exit code
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-admin help` got 0 exit code
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-admin --version` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-admin --help` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-admin help` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-admin-5.1 --help` got 0 exit code
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-admin-5.1 help` got 0 exit code
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-admin-5.1 --version` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-admin-5.1 --help` and found version 2.4.4
- ran `/nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4/bin/luarocks-admin-5.1 help` and found version 2.4.4
- found 2.4.4 with grep in /nix/store/az3lanws83s5q26z1s03rx6z6yxphjbq-luarocks-2.4.4
- directory tree listing: https://gist.github.com/cb3889fda28e8066faebd32a433c69d2
