nixpkgs-suyu/nixos/modules/services/backup/borgbackup.xml

<chapter xmlns="http://docbook.org/ns/docbook"
         xmlns:xlink="http://www.w3.org/1999/xlink"
         xmlns:xi="http://www.w3.org/2001/XInclude"
         version="5.0"
         xml:id="module-borgbase">
 <title>BorgBackup</title>
  <para>
  <emphasis>Source:</emphasis>
  <filename>modules/services/backup/borgbackup.nix</filename>
 </para>
 <para>
  <emphasis>Upstream documentation:</emphasis>
  <link xlink:href="https://borgbackup.readthedocs.io/"/>
 </para>
 <para>
  <link xlink:href="https://www.borgbackup.org/">BorgBackup</link> (short: Borg)
  is a deduplicating backup program. Optionally, it supports compression and
  authenticated encryption.
  </para>
  <para>
  The main goal of Borg is to provide an efficient and secure way to backup
  data. The data deduplication technique used makes Borg suitable for daily
  backups since only changes are stored. The authenticated encryption technique
  makes it suitable for backups to not fully trusted targets.
 </para>
  <section xml:id="module-services-backup-borgbackup-configuring">
  <title>Configuring</title>
  <para>
   A complete list of options for the Borgbase module may be found
   <link linkend="opt-services.borgbackup.jobs">here</link>.
  </para>
</section>
 <section xml:id="opt-services-backup-borgbackup-local-directory">
  <title>Basic usage for a local backup</title>

  <para>
   A very basic configuration for backing up to a locally accessible directory
   is:
<programlisting>
{
    opt.services.borgbackup.jobs = {
      { rootBackup = {
          paths = "/";
          exclude = [ "/nix" "/path/to/local/repo" ];
          repo = "/path/to/local/repo";
          doInit = true;
          encryption = {
            mode = "repokey";
            passphrase = "secret";
          };
          compression = "auto,lzma";
          startAt = "weekly";
        };
      }
    };
}</programlisting>
  </para>
  <warning>
    <para>
        If you do not want the passphrase to be stored in the world-readable
        Nix store, use passCommand. You find an example below.
    </para>
  </warning>
 </section>
<section xml:id="opt-services-backup-create-server">
  <title>Create a borg backup server</title>
  <para>You should use a different SSH key for each repository you write to,
    because the specified keys are restricted to running borg serve and can only
    access this single repository. You need the output of the generate pub file.
  </para>
    <para>
<screen>
<prompt># </prompt>sudo ssh-keygen -N '' -t ed25519 -f /run/keys/id_ed25519_my_borg_repo
<prompt># </prompt>cat /run/keys/id_ed25519_my_borg_repo
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAID78zmOyA+5uPG4Ot0hfAy+sLDPU1L4AiIoRYEIVbbQ/ root@nixos</screen>
    </para>
    <para>
      Add the following snippet to your NixOS configuration:
      <programlisting>
{
  services.borgbackup.repos = {
    my_borg_repo = {
      authorizedKeys = [
        "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAID78zmOyA+5uPG4Ot0hfAy+sLDPU1L4AiIoRYEIVbbQ/ root@nixos"
      ] ;
      path = "/var/lib/my_borg_repo" ;
    };
  };
}</programlisting>
    </para>
</section>

 <section xml:id="opt-services-backup-borgbackup-remote-server">
  <title>Backup to the borg repository server</title>
  <para>The following NixOS snippet creates an hourly backup to the service
    (on the host nixos) as created in the section above. We assume
    that you have stored a secret passphrasse in the file
    <code>/run/keys/borgbackup_passphrase</code>, which should be only
    accessible by root
  </para>
  <para>
      <programlisting>
{
  services.borgbackup.jobs = {
    backupToLocalServer = {
      paths = [ "/etc/nixos" ];
      doInit = true;
      repo =  "borg@nixos:." ;
      encryption = {
        mode = "repokey-blake2";
        passCommand = "cat /run/keys/borgbackup_passphrase";
      };
      environment = { BORG_RSH = "ssh -i /run/keys/id_ed25519_my_borg_repo"; };
      compression = "auto,lzma";
      startAt = "hourly";
    };
  };
};</programlisting>
  </para>
  <para>The following few commands (run as root) let you test your backup.
      <programlisting>
> nixos-rebuild switch
...restarting the following units: polkit.service
> systemctl restart borgbackup-job-backupToLocalServer
> sleep 10
> systemctl restart borgbackup-job-backupToLocalServer
> export BORG_PASSPHRASE=topSecrect
> borg list --rsh='ssh -i /run/keys/id_ed25519_my_borg_repo' borg@nixos:.
nixos-backupToLocalServer-2020-03-30T21:46:17 Mon, 2020-03-30 21:46:19 [84feb97710954931ca384182f5f3cb90665f35cef214760abd7350fb064786ac]
nixos-backupToLocalServer-2020-03-30T21:46:30 Mon, 2020-03-30 21:46:32 [e77321694ecd160ca2228611747c6ad1be177d6e0d894538898de7a2621b6e68]</programlisting>
    </para>
</section>

 <section xml:id="opt-services-backup-borgbackup-borgbase">
  <title>Backup to a hosting service</title>

  <para>
    Several companies offer <link
      xlink:href="https://www.borgbackup.org/support/commercial.html">(paid)
      hosting services</link> for Borg repositories.
  </para>
  <para>
    To backup your home directory to borgbase you have to:
  </para>
  <itemizedlist>
  <listitem>
    <para>
      Generate a SSH key without a password, to access the remote server. E.g.
    </para>
    <para>
        <programlisting>sudo ssh-keygen -N '' -t ed25519 -f /run/keys/id_ed25519_borgbase</programlisting>
    </para>
  </listitem>
  <listitem>
    <para>
      Create the repository on the server by following the instructions for your
      hosting server.
    </para>
  </listitem>
  <listitem>
    <para>
      Initialize the repository on the server. Eg.
      <programlisting>
sudo borg init --encryption=repokey-blake2  \
    -rsh "ssh -i /run/keys/id_ed25519_borgbase" \
    zzz2aaaaa@zzz2aaaaa.repo.borgbase.com:repo</programlisting>
  </para>
  </listitem>
  <listitem>
<para>Add it to your NixOS configuration, e.g.
<programlisting>
{
    services.borgbackup.jobs = {
    my_Remote_Backup = {
        paths = [ "/" ];
        exclude = [ "/nix" "'**/.cache'" ];
        repo =  "zzz2aaaaa@zzz2aaaaa.repo.borgbase.com:repo";
          encryption = {
          mode = "repokey-blake2";
          passCommand = "cat /run/keys/borgbackup_passphrase";
        };
        BORG_RSH = "ssh -i /run/keys/id_ed25519_borgbase";
        compression = "auto,lzma";
        startAt = "daily";
    };
  };
}}</programlisting>
  </para>
  </listitem>
</itemizedlist>
 </section>
  <section xml:id="opt-services-backup-borgbackup-vorta">
  <title>Vorta backup client for the desktop</title>
  <para>
    Vorta is a backup client for macOS and Linux desktops. It integrates the
    mighty BorgBackup with your desktop environment to protect your data from
    disk failure, ransomware and theft.
  </para>
  <para>
   It can be installed in NixOS e.g. by adding <package>pkgs.vorta</package>
   to <xref linkend="opt-environment.systemPackages" />.
  </para>
  <para>
    Details about using Vorta can be found under <link
      xlink:href="https://vorta.borgbase.com/usage">https://vorta.borgbase.com
      </link>.
  </para>
 </section>
</chapter>